Trunk‑Inspired SWCNT‑Based Wrinkled Films for Highly‑Stretchable Electromagnetic Interference Shielding and Wearable Thermotherapy

Nowadays,the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health,so stretchable electromagnetic interference(EMI)shielding materials are highly demanded.Elephant trunks are capable of grabbing fragile vegetation and tearing trees thanks not only to their muscles but also to their folded skins.Inspired by the wrinkled skin of the elephant trunks,herein,we propose a winkled conductive film based on single-walled carbon nanotubes(SWCNTs)for multifunctional EMI applications.The conductive film has a sandwich structure,which was prepared by coating SWCNTs on both sides of the stretched elastic latex cylindrical substrate.The shrinking-induced winkled conductive network could withstand up to 200%tensile strain.Typically,when the stretching direction is parallel to the polarization direction of the electric field,the total EMI shielding effectiveness could surprisingly increase from 38.4 to 52.7 dB at 200%tensile strain.It is mainly contributed by the increased connection of the SWCNTs.In addition,the film also has good Joule heating performance at several voltages,capable of releasing pains in injured joints.This unique property makes it possible for strain-adjustable multifunctional EMI shielding and wearable thermotherapy applications.

Preparation and Characterization of Axial Gradient Silicon Carbide Fibers with Sinusoidal Electrical Resistivity

Two types of silicon carbide fibers with sinusoidal electrical resistivity were prepared by using different pyrolysis technology. The relationship between the microstructure and the electrical resistivity of these fibers was investigated and compared. The results indicated that carbon layer was the main conductive phase in the SiC fibers obtained by means of one step pyrolysis, whereas a free carbon phase governed the conductivity of the SiC fibers prepared through two step pyrolysis mode.

Porous reduced graphene oxide for ultrasensitive detection of nitrogen dioxide

The defect engineering in graphene plays a significant role for the application of gas sensors. In this work, we proposed an efficient method to prepare ultrasensitive gas sensors based on the porous reduced graphene oxide(PRGO). Photo-Fenton etching was carried out on GO nanosheets in a controlled manner to enrich their vacancy defects. The resulting porous graphene oxide(PGO) was then drop-coated on interdigital electrodes and hydrothermal reduced at 180 °C. Controllable reduction was achieved by varying the water amount. The gas sensor based on PRGO-5 min-6h exhibited superior sensing and selective performance toward nitrogen dioxide(NO2), with an exceptional high sensitivity up to 12 ppm-1.The theoretical limit of detection is down to 0.66 ppb. The excellent performance could be mainly attributed to the typical vacancy defects of PRGO. Some residue carboxylic groups on the edges could also facilitate the adsorption of polar molecules. The process has a great potential for scalable fabrication of high-performance NO2gas sensors.