NUMERICAL SIMULATION OF EXTRUSION OF COMPOSITE POWDERS PREPARED BY HIGH ENERGY MILLING

Based on the characteristic of high energy milling and the micromechanics of composite material, a plastic constitutive equation is implemented for milled composite powders. To check the equation, the extrusion of Ti/Al composite powders prepared by high energy milling was simulated. It was from the numerical analysis that the predicted extrusion pressure mounted up with milling time and extrusion ratio increasing, which was perfect agreement with experimental results.

STCF conceptual design report (Volume 1): Physics & detector

The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.

Future Physics Programme of BESⅢ

There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.

Unveiling anneal hardening in dilute Al-doped Al_(x)CoCrFeMnNi(x = 0,0.1) high-entropy alloys

Anneal hardening has been one of the approaches to improve mechanical properties of solid solution alloys with the face-centered cubic(FCC) structure,whereby a considerable strengthening can be attained by annealing of cold-worked alloys below the recrystallization temperature(T_(rx)).Microscopically,this hardening effect has been ascribed to several mechanisms,i.e.solute segregation to defects(dislocation and stacking fault) and short-range chemical ordering,etc.However,none of these mechanisms can well explain the anneal hardening recently observed in phase-pure and coarse-grained FCC-structured high-entropy alloys(HEAs).Here we report the observations,using high-resolution electron channeling contrast imaging and transmission electron microscopy,of profuse and stable dislocation substructures in a cold-rolled CoCrFeMnNi HEA subject to an annealing below T_(rx).The dislocation substructures are observed to be thermally stable up to T_(rx),which could arise from the chemical complexity of the high-entropy system where certain elemental diffusion retardation occurs.The microstructure feature is markedly different from that of conventional dilute solid solution alloys,in which dislocation substructures gradually vanish by recovery during annealing,leading to a strength drop.Furthermore,dilute addition of 2 at.% Al leads to a reduction in both microhardness and yield strength of the cold-rolled and subsequently annealed(≤500℃) HEA.This Al induced softening effect,could be associated with the anisotropic formation of dislocation substructure,resulting from enhanced dislocation planar slip due to glide plane softening effect.These findings suggest that the strength of HEAs can be tailored through the anneal hardening effect from dislocation substructure strengthening.

The design and performance of GRD onboard the GECAM satellite

Background Each GECAM satellite payload contains 25 gamma-ray detectors(GRDs),which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts(GRBs).GRD was designed using lanthanum bromide(LaBr3)crystal as the sensitive material with the rear end coupled with silicon photomultiplier(SiPM)array for readout.Purpose In aerospace engineering design of GRD,there are many key points to be studied.In this paper,we present the specific design scheme of GRD,the assembly and the performance test results of detectors.Methods Based on Monte Carlo simulation and experimental test results,the specific schematic design and assembling process of GRD were optimized.After being fully assembled,the GRDs were conducted performance tests by using radioactive source and also conducted random vibration tests.Result and conclusion The test results show that all satellite-borne GRDs have energy resolution<16%at 59.5 keV,meeting requirements of satellite in scientific performance.The random vibration test shows that GRD can maintain in a stable performance,which meets the requirement of spatial application.

The high-energy particle package onboard CSES

Introduction The China Seismo-Electromagnetic Satellite(CSES)aims to monitor space electromagnetic fields,ionospheric plasma,high-energy charged particles and other features of the global space environment.The high-energy particle package(HEPP),which can effectively detect the energy spectrum,flux and pitch angle distribution of space electrons and protons,and soft X-ray emission from solar flares,is one of the main payloads of CSES.Purposes and methods In this study,we designed,developed and calibrated the high-energy particle package and launched it into orbit with CSES.HEPP consists of the high-energy detector(HEPP-H),the low-energy detector(HEPP-L),and the solar X-ray monitor(HEPP-X).The three sub-detectors mainly use silicon detector and crystal calorimeter detection technology.Before launching,we calibrated the three sub-detectors in detail by using radiation source and accelerator beam.Results All the three sub-detectors have good energy linearity.After launching into orbit,the space energetic particles and X-ray distribution detected by HEPP are consistent with expectations.The performance indices of the detector reach the advanced level of the same kind of detector in the world.Conclusions HEPP has a wide energy detection range,good energy resolution and high angular resolution ability for electrons and protons.It will play an important role in the study of space particle response and space physics of seismic activity.

The technology for detection of gamma-ray burst with GECAM satellite

Introduction The main physical objective of the GECAM satellite is to detect gamma-ray bursts,which is related to gravitational waves of double compact object mergers.The GECAM satellite also detects and investigates various bursts of high-energy celestial bodies.Purposes and methods In this study,we designed,developed and calibrated the payload and launched it into orbit with GECAM satellite.The payload consists of the gamma ray detector(GRD,for detecting 4 keV–4 MeV X/γray),the charged particle detector(CPD,for detecting 150 keV–5 MeV charged particle),and the electronic box(EBOX).The all-sky field coverage is achieved via two 229-degree large-area satellites positioned 180 degrees apart and are on opposite sides of the geo-center.Each satellite is equipped with 25 GRDs and 8 CPDs;thus,the satellite can identify charged particle bursts in space.Gamma-ray detectors adopt lanthanum bromide crystal technology combined with silicon photomultipliers.This is the first time that this technology was used massively in space detectors.Conclusions The GECAM satellite can quickly determine the direction of gamma-ray bursts(positioning)via indexing and fitting method,while the transmit variability,energy spectrum and direction of the gamma-ray bursts guide subsequent observations through the Beidou-3 RDSS in quasi-real time.It will play an important role in the study of high energy celestial bursts.

The design and performance of charged particle detector onboard the GECAM mission

Background The Gravitational wave highly energetic Electromagnetic Counterpart All-sky Monitor(GECAM)is dedicated to detecting gravitational wave gamma-ray bursts.It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena.GECAM consists of two microsatellites,each equipped with 8 charged particle detectors(CPDs)and 25 gamma-ray detectors(GRDs).Purpose The CPD is used to measure charged particles in the space environment,monitor energy and flow intensity changes,and identify between gamma-ray bursts and space charged particle events in conjunction with GRD.Methods CPD uses plastic scintillator as the sensitive material for detection,silicon photomultiplier array as the optically readable device,and the inlaid Am-241 radioactive source as the onboard calibration means.Conclusion In this paper,we will present the working principle,physical design,functional implementation and preliminary performance test results of the CPD.As a result,the energy range of electron,gamma-ray detection efficiency and dead time are tested to be better than the indexes required through the ground calibration experiment.

The data acquisition algorithm designed for the SiPM-based detectors of GECAM satellite

Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Method silicon photomultiplier(SiPM)array is used to read each detector.The output signal of these detectors with SiPM array is very special and challenging to readout.In this study,a novel data acquisition(DAQ)algorithm for these detectors is designed and implemented,and the content of the output event packet is defined.Result and Conclusion The performances,including the event acquisition efficiency of this DAQ algorithm,are extensively verified through experimental tests.From the on-ground and in-flight tests,this algorithm has excellent performance despite the very limited resources and short development time of GECAM mission.

Search for electron-antineutrinos associated with gravitational-wave events GW150914,GW151012,GW151226,GW170104,GW170608,GW170814,and GW170817 at Daya Bay

The establishment of a possible connection between neutrino emission and gravitational-wave(GW)bursts is important to our understanding of the physical processes that occur when black holes or neutron stars merge.In the Daya Bay experiment,using the data collected from December 2011 to August 2017,a search was per-formed for electron-antineutrino signals that coincided with detected GW events,including GW150914,GW151012,GW151226,GW170104,GW170608,GW 170814,and GW 170817.We used three time windows of±10,±500,and±1000 s relative to the occurrence of the GW events and a neutrino energy range of 1.8 to 100 MeV to search for correlated neutrino candidates.The detected electron-antineutrino candidates were consistent with the expected background rates for all the three time windows.Assuming monochromatic spectra,we found upper limits(90%confidence level)of the electron-antineutrino fluence of(1.13-2.44)×10^(11)cm^(-2)at 5 MeV to 8.0×10^(7)cm^(-2)at 100 MeV for the three time w indows.Under the assumption of a Fermi-Dirac spectrum,the upper limits were found to be(5.4-7.0)×10^(9)cm^(2)for the three time windows.

Observation of e^+e^-→D_s^+■^((*)0)K^- and study of the P-wave D_s mesons

Studies of e^+e~→D_s^+■^((*)0)K^-and the P-wave charmed-strange mesons are performed based on an e^+e^-collision data sample corresponding to an integrated luminosity of 567 pb^(-1) collected with the BESIII detector at s^(1/2)=4.600 GeV. The processes of e^+e^-→D_s^+■^(*0)K^- and D_s^+■~0K^- are observed for the first time and are found to be dominated by the modes D_s^+D_(s1)(2536)^-and D_s^+D_(s2)~*(2573)^-, respectively. The Born cross sections are measured to be σ~B(e^+e^-→D_s^+■^(*0)K^-) =(10.1±2.3±0.8) pb and σ~B(e^+e^-→D_s^+■~0K^-) =(19.4±2.3± 1.6) pb, and the products of Born cross section and the decay branching fraction are measured to be σ~B(e^+e^-→D_s^+D_(s1)(2536)^-+c.c.)·B(D_(s1)(2536)^-→■^(*0)K^-)=(7.5±1.8±0.7) pb and σ~B(e^+e^-→D_s^+D_(s2)~*(2573)^-+ c.c.)·B(D_(s2)~*(2573)^-→■~0 K^-)=(19.7 ± 2.9 ±2.0) pb. For the D_(s1)(2536)^-and D_(s2)~*(2573)^-mesons, the masses and widths are measured to be M(D_(s1)(2536)^-)=(2537.7±0.5 ±3.1) MeV/c2, Γ(D_(s1)(2536)^-) =(1.7 ±1.2 ±0.6)MeV, and M(D_(s2)~*(2573)^-)=(2570.7±2.0 ±1.7) MeV/c^2, Γ(D_(s2)~*(2573)^-)=(17.2 ±3.6 ±1.1) MeV. The spin-parity of the D_(s2)~*(2573)^-meson is determined to be J^p= 2^+. In addition, the processes e^+e^-→D_s^+■^((*)0)K^-are searched for using the data samples taken at four(two) center-of-mass energies between 4.416(4.527) and 4.575 GeV, and upper limits at the 90% confidence level on the cross sections are determined.

Evidence for the decays of ∧_c^+→∑^+η and ∑^+η’

We study the hadronic decays of ∧c+ to the final states ∑+η and ∑+η’,using an e+e-annihilation data sample of 567 pb-1 taken at a center-of-mass energy of 4.6 GeV with the BESIII detector at the BEPCⅡ collider.We find evidence for the decays ∧c+→∑+η and ∑+η’ with statistical significance of 2.5σ and 3.2σ,respectively.Normalizing to the reference decays ∧c+→∑+π0 and ∑+ω,we obtain the ratios of the branching fractions■and ■to be 0.35±0.16±0.02 and 0.86±0.34±0.04,respectively.The upper limits at the 90% confidence level are set to be■and■.Using BESIII measurements of the branching fractions of the reference decays,we determine B（∧c+→∑+η）=（0.41±0.19±0.05）%（<0.68%）and B（∧c+→∑+η’）=（1.34±0.53 ±0.19）%（<1.9%）.Here,the first uncertainties are statistical and the second systematic.The obtained branching fraction of ∧c+→∑+η is consistent with the previous measurement,and the branching fraction of ∧c+→∑+η’ is measured for the first time.

Dedicated SiPM array for GRD of GECAM

Purpose The discovery of gravitational waves and gamma-ray bursts heralds the era of multi-messenger astronomy.With the adoption of two small satellites to achieve the all-sky monitoring of gamma-ray bursts,the gravitational wave highenergy electromagnetic counterpart all-sky monitor(GECAM)possesses a quasi-real-time early warning ability and plays an important role in positioning the sources of gravitational waves and in subsequent observations.Each satellite of GECAM was fitted with 253-inch-diameter gamma-ray detectors(GRD),covering an energy range of 8–2 MeV.GRDs have adopted silicon photomultiplier tubes(SiPM)in lieu of photomultiplier tubes(PMT)to adapt to the dimensional limitations of micro-satellites.Methods A unique 3-inch circular SiPM array was designed.In this design,646×6 mm chips were arranged evenly in a circular manner with the seams filled with reflecting films,thus achieving satisfactory uniformity of light collection.The integrated pre-amplifier circuit on the back of the SiPM array adopted two-level grouping and summing;further,it achieved a satisfactory signal-to-noise ratio.Two high-gain and low-gain channels were adopted to achieve a large dynamic range,and two independent power supply units were used,where each unit can be closed separately,thus improving reliability.Results Performance studies show that this SiPM array meets the requirements of GECAM.Conclusion A 3-inch SiPM array have been developed that uses grouped summation,reflective films,a circular arrangement,two groups of independent power supplies,high-and low-gain signals,differential signal output technologies,etc.This solution can be used not only for GECAM,but also as a general solution for SiPM-based scintillation detectors.

Antineutrino energy spectrum unfolding based on the Daya Bay measurement and its applications

The prediction of reactor antineutrino spectra will play a crucial role as reactor experiments enter the precision era.The positron energy spectrum of 3.5 million antineutrino inverse beta decay reactions observed by the Daya Bay experiment,in combination with the fission rates of fissile isotopes in the reactor,is used to extract the positron energy spectra resulting from the fission of specific isotopes.This information can be used to produce a precise,data-based prediction of the antineutrino energy spectrum in other reactor antineutrino experiments with different fission fractions than Daya Bay.The positron energy spectra are unfolded to obtain the antineutrino energy spectra by removing the contribution from detector response with the Wiener-SVD unfolding method.Consistent results are obtained with other unfolding methods.A technique to construct a data-based prediction of the reactor antineutrino energy spectrum is proposed and investigated.Given the reactor fission fractions,the technique can predict the energy spectrum to a 2%precision.In addition,we illustrate how to perform a rigorous comparison between the unfolded antineutrino spectrum and a theoretical model prediction that avoids the input model bias of the unfolding method.

Quality assurance test and failure analysis of SiPM arrays of GECAM satellites

Background The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)satellite developed a SiPM-based gamma-ray detector to monitor the gravitational wave-related GRBs and guide subsequent observations in other wavelengths of EM.Purpose As all the available SiPM devices belong to commercial grade,quality assurance tests need to be performed in accordance with the aerospace specifcations.Methods In the SiPM application of GECAM,quality assurance experiments were conducted.The mechanism of the failure of SiPM devices was analyzed during the development process.Result Based on the quality assurance test results,the fnal pass rate of SiPM array was 95%.Based on the failure analysis,it was found that a piece of SiPM had a leakage channel after longtime operation due to device defects.Conclusion According to the accumulated experience,in the reliability test of SiPM,it is necessary to pay special attention to test the impedance of each pin of SiPM to ground and confrm that the power switch state of SiPM is controllable.