A complete and detail method is described to get digitally reconstructed radiographs （DRRs）. Casting rays to traverse CT images, computing CT values of resample points by interpolation, then converting CT value to i...A complete and detail method is described to get digitally reconstructed radiographs （DRRs）. Casting rays to traverse CT images, computing CT values of resample points by interpolation, then converting CT value to its attenuation coefficient by using simplified segment function. Finally, DRRs enhancement is made to get the better display of region of interest （ROI）, and a new way is adopted to adjust the customization coefficient. The experimental results show that the proposed method is effective in generating the satisfied DRRs.展开更多
A new appraisal method（QDA, quasi-distribution appraisal） which could be used to evaluate the finite element analysis of multi-functional structure made of honeycomb sandwich materials is developed based on sub-sect...A new appraisal method（QDA, quasi-distribution appraisal） which could be used to evaluate the finite element analysis of multi-functional structure made of honeycomb sandwich materials is developed based on sub-section Bezier curve. It is established by simulating the distribution histogram data obtained from the numerical finite element analysis values of a satellite component with sub-section Bezier curve. Being dealt with area normalization method, the simulation curve could be regarded as a kind of probability density function（PDF）, its mathematical expectation and the variance could be used to evaluate the result of finite element analysis. Numerical experiments have indicated that the QDA method demonstrates the intrinsic characteristics of the finite element analysis of multi-functional structure made of honeycomb sandwich materials, as an appraisal method, it is effective and feasible.展开更多
A new cosmological model based on the de Sitter gravity is investigated by dynamical analysis and numerical discussions.Via some transformations,the evolution equations of this model can form an autonomous system with...A new cosmological model based on the de Sitter gravity is investigated by dynamical analysis and numerical discussions.Via some transformations,the evolution equations of this model can form an autonomous system with 8 physical critical points.Among these critical points there exist one positive attractor and one negative attractor.The positive attractor describes the asymptotic behavior of late-time universe,which indicates that the universe will enter the exponential expansion phase,finally.Some numerical calculations are also carried out,which convince us of this conclusion derived from the dynamical analysis.展开更多
In the process of traditional aircraft structure design, repetitive manual modeling of aircraft wing box parts is time consuming. Meanwhile, it＇s difficult to update associated models when product design changes. Aim...In the process of traditional aircraft structure design, repetitive manual modeling of aircraft wing box parts is time consuming. Meanwhile, it＇s difficult to update associated models when product design changes. Aiming at solving these problems, a method for rapid modeling and updating associated models was put forward. Based on skeleton model, combining with the technology of template re-use, it makes aircraft wing box rapid modeling and correct updating possible. The detailed implementation process of the method was given, and a certain aircraft wing box was taken as an instance to verify the feasibility and effectiveness of this method.展开更多
Traditional feature-based turbine blade models can match the needs of geometric modeling but could hardly meet the requirement of data extraction in 1-D heat transfer analysis. In this paper, the requirements of data ...Traditional feature-based turbine blade models can match the needs of geometric modeling but could hardly meet the requirement of data extraction in 1-D heat transfer analysis. In this paper, the requirements of data extraction in 1-D heat transfer analysis are taken into consideration as well as geometric representation in parametric design process. An improved turbine blade parametric modeling method is proposed. Based on the modeling method proposed, a system structure of blade modeling process considering 1-D heat transfer analysis is devised. Eventually, a turbine blade parametric modeling system is constructed to test and verify the feasibility of the proposed modeling method and system structure. Experiments show that the blade parametric modeling method proposed can make geometric models better adapt to the specific requirements of 1-D heat transfer analysis and has certain reference value to the creation of high quality digital models.展开更多
基金Support by Natural Science Foundation of Yunnan Province (2008 C0013R)
文摘A complete and detail method is described to get digitally reconstructed radiographs （DRRs）. Casting rays to traverse CT images, computing CT values of resample points by interpolation, then converting CT value to its attenuation coefficient by using simplified segment function. Finally, DRRs enhancement is made to get the better display of region of interest （ROI）, and a new way is adopted to adjust the customization coefficient. The experimental results show that the proposed method is effective in generating the satisfied DRRs.
基金Funded by the National Natural Science Foundation of China(No.61471024)National Marine Technology Program for Public Welfare,China(No.201505002-1)
文摘A new appraisal method（QDA, quasi-distribution appraisal） which could be used to evaluate the finite element analysis of multi-functional structure made of honeycomb sandwich materials is developed based on sub-section Bezier curve. It is established by simulating the distribution histogram data obtained from the numerical finite element analysis values of a satellite component with sub-section Bezier curve. Being dealt with area normalization method, the simulation curve could be regarded as a kind of probability density function（PDF）, its mathematical expectation and the variance could be used to evaluate the result of finite element analysis. Numerical experiments have indicated that the QDA method demonstrates the intrinsic characteristics of the finite element analysis of multi-functional structure made of honeycomb sandwich materials, as an appraisal method, it is effective and feasible.
基金Supported by the Specialized Research Fund for the Doctoral Program of Higher Education(SRFDP)under Grant No 200931271104Shanghai Municipal Pujiang Foundation under Grant No 10PJ1408100.
文摘A new cosmological model based on the de Sitter gravity is investigated by dynamical analysis and numerical discussions.Via some transformations,the evolution equations of this model can form an autonomous system with 8 physical critical points.Among these critical points there exist one positive attractor and one negative attractor.The positive attractor describes the asymptotic behavior of late-time universe,which indicates that the universe will enter the exponential expansion phase,finally.Some numerical calculations are also carried out,which convince us of this conclusion derived from the dynamical analysis.
文摘In the process of traditional aircraft structure design, repetitive manual modeling of aircraft wing box parts is time consuming. Meanwhile, it＇s difficult to update associated models when product design changes. Aiming at solving these problems, a method for rapid modeling and updating associated models was put forward. Based on skeleton model, combining with the technology of template re-use, it makes aircraft wing box rapid modeling and correct updating possible. The detailed implementation process of the method was given, and a certain aircraft wing box was taken as an instance to verify the feasibility and effectiveness of this method.
文摘Traditional feature-based turbine blade models can match the needs of geometric modeling but could hardly meet the requirement of data extraction in 1-D heat transfer analysis. In this paper, the requirements of data extraction in 1-D heat transfer analysis are taken into consideration as well as geometric representation in parametric design process. An improved turbine blade parametric modeling method is proposed. Based on the modeling method proposed, a system structure of blade modeling process considering 1-D heat transfer analysis is devised. Eventually, a turbine blade parametric modeling system is constructed to test and verify the feasibility of the proposed modeling method and system structure. Experiments show that the blade parametric modeling method proposed can make geometric models better adapt to the specific requirements of 1-D heat transfer analysis and has certain reference value to the creation of high quality digital models.
