为提高船厂对管件生产数据和质量数据的管控,提出构建船舶管加工工艺数据库系统。研究管加工工艺数据库系统总体设计,梳理管加工工艺流程,完善管件组立过程。经船厂实际应用,船舶管加工工艺数据库系统实现管件物料清单(Bill of Material...为提高船厂对管件生产数据和质量数据的管控,提出构建船舶管加工工艺数据库系统。研究管加工工艺数据库系统总体设计,梳理管加工工艺流程,完善管件组立过程。经船厂实际应用,船舶管加工工艺数据库系统实现管件物料清单(Bill of Material, BOM)管理规范化和工时精细化,可有效提高船厂生产效率,满足企业预期要求。展开更多
The abnormal corrosion of hot iron ladles was investigated.The performance,the composition and the structure of bricks for hot iron ladles were analyzed.The results show that(1)compared with the alumina-silicon carbid...The abnormal corrosion of hot iron ladles was investigated.The performance,the composition and the structure of bricks for hot iron ladles were analyzed.The results show that(1)compared with the alumina-silicon carbide-carbon bricks for the ladle bottom,those for the ladle wall have more pyrophyllite and the Al2O3 content of 36.32 mass%;their bulk density,apparent porosity and cold compressive strength are lower than the requirement of industry standard;they have poor anti-oxidation performance and are oxidized to form a porous layer during service,which loosens the brick lining structure thus leading to fracture,local wear and structural damage of bricks;(2)without preheating,steel scraps are not completely melted,resulting in slag or steel attachment at the mouth or the bottom of ladles thus increasing damage of ladles;(3)and the residual bricks react with the attached slag to form low melting point phases affecting their hot properties.The refractories for the lining of hot iron ladles must be improved in combination with process changes,not entirely by raw materials replacement to reduce costs.展开更多
Three lightweight Al_(2)O_(3)-MgO castables were fabricated with tabular alumina or microporous corundum as the aggregates,reactiveα-Al_(2)O_(3)micropowder,tabular alumina powder,and fused magnesia powder as the matr...Three lightweight Al_(2)O_(3)-MgO castables were fabricated with tabular alumina or microporous corundum as the aggregates,reactiveα-Al_(2)O_(3)micropowder,tabular alumina powder,and fused magnesia powder as the matrix,calcium aluminate cement as the binder,and MgO ultrafine powder(d50=5.4μm)and Al(OH)3 ultrafine powder(d50=8.2μm)as additives.The influence of aggregates and ultrafine powders on the properties,including pore size distribution,heat conductivity,thermal shock resistance,and slag resistance of lightweight refractory castables was investigated.The results show that the incorporation of microporous corundum reduces the bulk density of Al_(2)O_(3)-MgO castables,and MgO and Al(OH)3 ultrafine powders further increases the proportion of micropores in castables,which is beneficial to reducing the heat conductivity,and improving the thermal shock resistance and slag resistance of castables.Additionally,MgO ultrafine powder and Al(OH)3 ultrafine powder increase the fluidity and the strength of castables.展开更多
The properties and microstructure of sol self-clean bonded Al2O3-SiC-C castable in iron runner were studied, and the relation between the amount of sol self- clean binder and the properties of castable were discussed....The properties and microstructure of sol self-clean bonded Al2O3-SiC-C castable in iron runner were studied, and the relation between the amount of sol self- clean binder and the properties of castable were discussed. It is believed that the addition of sol self-clean binder can improve the compressive strength, but has little effect on the bulk density and the apparent porosity, which enable the castable to be applicable in different conditions.展开更多
To reduce the burning loss and the spalling and to improve energy efficiency,the mullite composite lining plates were used to replace cast steel or alloy lining in rotary coke tanks for coke dry quenching equipment.Th...To reduce the burning loss and the spalling and to improve energy efficiency,the mullite composite lining plates were used to replace cast steel or alloy lining in rotary coke tanks for coke dry quenching equipment.The results show that:the dense mullite composite lining plate in the cone part has the density of 2.20 g·cm^(-3) and the wear test,s volume loss of 4.08 cm^(3),and the light weight mullite composite lining plate in the straight cylinder part has the density of 1.95 g·cm^(-3) and the wear test,s volume loss of 17.6 cm^(3).After using,there is no shrinkage gap,no burn loss or holes in the plates,indicating good sealing of the mullite composite lining plates.The lining plate for the cone part has low burning loss,without spalling for more than half a year.The outer surface temperature of coke tanks adopting the cast steel or the alloy lining is 480 to 570℃,while that of the ones adopting mullite composite lining plates is 120 to 170℃,showing a largely improved insulating property.Adopting mullite composite lining plates on the basis of the current coke tank cage,the lining plates can be timely treated and wholly replaced,improving the service life and reducing the maintenance workload.展开更多
文摘为提高船厂对管件生产数据和质量数据的管控,提出构建船舶管加工工艺数据库系统。研究管加工工艺数据库系统总体设计,梳理管加工工艺流程,完善管件组立过程。经船厂实际应用,船舶管加工工艺数据库系统实现管件物料清单(Bill of Material, BOM)管理规范化和工时精细化,可有效提高船厂生产效率,满足企业预期要求。
文摘The abnormal corrosion of hot iron ladles was investigated.The performance,the composition and the structure of bricks for hot iron ladles were analyzed.The results show that(1)compared with the alumina-silicon carbide-carbon bricks for the ladle bottom,those for the ladle wall have more pyrophyllite and the Al2O3 content of 36.32 mass%;their bulk density,apparent porosity and cold compressive strength are lower than the requirement of industry standard;they have poor anti-oxidation performance and are oxidized to form a porous layer during service,which loosens the brick lining structure thus leading to fracture,local wear and structural damage of bricks;(2)without preheating,steel scraps are not completely melted,resulting in slag or steel attachment at the mouth or the bottom of ladles thus increasing damage of ladles;(3)and the residual bricks react with the attached slag to form low melting point phases affecting their hot properties.The refractories for the lining of hot iron ladles must be improved in combination with process changes,not entirely by raw materials replacement to reduce costs.
基金the National Natural Science Foundation of China(grant no.51774218 and 51374162)for providing financial support for this work.
文摘Three lightweight Al_(2)O_(3)-MgO castables were fabricated with tabular alumina or microporous corundum as the aggregates,reactiveα-Al_(2)O_(3)micropowder,tabular alumina powder,and fused magnesia powder as the matrix,calcium aluminate cement as the binder,and MgO ultrafine powder(d50=5.4μm)and Al(OH)3 ultrafine powder(d50=8.2μm)as additives.The influence of aggregates and ultrafine powders on the properties,including pore size distribution,heat conductivity,thermal shock resistance,and slag resistance of lightweight refractory castables was investigated.The results show that the incorporation of microporous corundum reduces the bulk density of Al_(2)O_(3)-MgO castables,and MgO and Al(OH)3 ultrafine powders further increases the proportion of micropores in castables,which is beneficial to reducing the heat conductivity,and improving the thermal shock resistance and slag resistance of castables.Additionally,MgO ultrafine powder and Al(OH)3 ultrafine powder increase the fluidity and the strength of castables.
文摘The properties and microstructure of sol self-clean bonded Al2O3-SiC-C castable in iron runner were studied, and the relation between the amount of sol self- clean binder and the properties of castable were discussed. It is believed that the addition of sol self-clean binder can improve the compressive strength, but has little effect on the bulk density and the apparent porosity, which enable the castable to be applicable in different conditions.
文摘To reduce the burning loss and the spalling and to improve energy efficiency,the mullite composite lining plates were used to replace cast steel or alloy lining in rotary coke tanks for coke dry quenching equipment.The results show that:the dense mullite composite lining plate in the cone part has the density of 2.20 g·cm^(-3) and the wear test,s volume loss of 4.08 cm^(3),and the light weight mullite composite lining plate in the straight cylinder part has the density of 1.95 g·cm^(-3) and the wear test,s volume loss of 17.6 cm^(3).After using,there is no shrinkage gap,no burn loss or holes in the plates,indicating good sealing of the mullite composite lining plates.The lining plate for the cone part has low burning loss,without spalling for more than half a year.The outer surface temperature of coke tanks adopting the cast steel or the alloy lining is 480 to 570℃,while that of the ones adopting mullite composite lining plates is 120 to 170℃,showing a largely improved insulating property.Adopting mullite composite lining plates on the basis of the current coke tank cage,the lining plates can be timely treated and wholly replaced,improving the service life and reducing the maintenance workload.
