The unstable flow phenomena in compressors, such as stall and surge, are closely related to the e ciency and the operating region. It is indispensable to capture the unstable flow structure in compressors and understa...The unstable flow phenomena in compressors, such as stall and surge, are closely related to the e ciency and the operating region. It is indispensable to capture the unstable flow structure in compressors and understand the mechanism of flow instability at low flow rates. Cooperated with the manufacturer, an industrial centrifugal compressor with a vaneless di user is tested by its performance test rig and our multi-phase dynamic measurement system. Many dynamic pressure transducers are circumferentially mounted on the casing surface at seven radial locations, spanning the impeller region and the di user inlet region. The pressure fields from the design condition to surge are measured in details. Based on the multi-phase dynamic signals, the original location of stall occurring can be determined. Meanwhile, the information of the unstable flow structure is obtained, such as the circumferential mode and the propagating speed of stall cells. To get more details of the vortex structure, an unsteady simulation of this tested compressor is carried out. The computational result is well matched with the experimental result and further illustrates how the unstable flow structure in the impeller region gradually a ects the stability of the total machine at low flow rates. The dynamic mode decomposition(DMD) method is applied to get the specific flow pattern corresponding to the stall frequency. Both experimental and computational analysis show that the flow structure at a particular radial location in the impeller region has a great impact on the stall and surge. Some di erences between the computational and experimental result are also discussed. Through these two main analytical methods, an insight into the unstable flow structure in an industrial compressor is gained. The result also plays a crucial role in the guidance of the compressor stabilization techniques.展开更多
Smart functional microgels hold great potential in a variety of applications,especially in drug transportation.However,current drug carriers based on physiological internal stimuli cannot efficiently orientate to desi...Smart functional microgels hold great potential in a variety of applications,especially in drug transportation.However,current drug carriers based on physiological internal stimuli cannot efficiently orientate to designated locations.Therefore,it is necessary to introduce the self-propelled particles to the drug release of the microgels.In order to study self-propulsion of microgels induced by light,it is also a challenge to prepare micronsized microgels so that they can be observed directly under optical microscopes.In this work,phototactic microgels with photoresponsive properties are prepared.The microgel particles can be observed by confocal laser scanning microscopy.The photoresponsive properties of microgels are fully investigated by various instruments.Light can also regulate the state of the microgel solution,making it switch between turbidity and clarity.The phototaxis of particles irradiated by UV light was studied,which may be used for microgels enrichment and drug transportation and release.展开更多
In this study, the Solidworks was used as pre-processor, which performed the three- dimensional solid construction and automatic enmeshment. The COSMOS was adopted as post- processor to display the temperature distrib...In this study, the Solidworks was used as pre-processor, which performed the three- dimensional solid construction and automatic enmeshment. The COSMOS was adopted as post- processor to display the temperature distribution and further to simulate the thermal stress distribution of dies. A software package for three-dimensional temperature fields of complicated die casting and its dies was developed and the temperature distributions of a fan cover casting were simulated by the software.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51276108)
文摘The unstable flow phenomena in compressors, such as stall and surge, are closely related to the e ciency and the operating region. It is indispensable to capture the unstable flow structure in compressors and understand the mechanism of flow instability at low flow rates. Cooperated with the manufacturer, an industrial centrifugal compressor with a vaneless di user is tested by its performance test rig and our multi-phase dynamic measurement system. Many dynamic pressure transducers are circumferentially mounted on the casing surface at seven radial locations, spanning the impeller region and the di user inlet region. The pressure fields from the design condition to surge are measured in details. Based on the multi-phase dynamic signals, the original location of stall occurring can be determined. Meanwhile, the information of the unstable flow structure is obtained, such as the circumferential mode and the propagating speed of stall cells. To get more details of the vortex structure, an unsteady simulation of this tested compressor is carried out. The computational result is well matched with the experimental result and further illustrates how the unstable flow structure in the impeller region gradually a ects the stability of the total machine at low flow rates. The dynamic mode decomposition(DMD) method is applied to get the specific flow pattern corresponding to the stall frequency. Both experimental and computational analysis show that the flow structure at a particular radial location in the impeller region has a great impact on the stall and surge. Some di erences between the computational and experimental result are also discussed. Through these two main analytical methods, an insight into the unstable flow structure in an industrial compressor is gained. The result also plays a crucial role in the guidance of the compressor stabilization techniques.
基金supported by the National Natural Science Foundation of China(No.21274135,No.21871243 and No.51673181)。
文摘Smart functional microgels hold great potential in a variety of applications,especially in drug transportation.However,current drug carriers based on physiological internal stimuli cannot efficiently orientate to designated locations.Therefore,it is necessary to introduce the self-propelled particles to the drug release of the microgels.In order to study self-propulsion of microgels induced by light,it is also a challenge to prepare micronsized microgels so that they can be observed directly under optical microscopes.In this work,phototactic microgels with photoresponsive properties are prepared.The microgel particles can be observed by confocal laser scanning microscopy.The photoresponsive properties of microgels are fully investigated by various instruments.Light can also regulate the state of the microgel solution,making it switch between turbidity and clarity.The phototaxis of particles irradiated by UV light was studied,which may be used for microgels enrichment and drug transportation and release.
文摘In this study, the Solidworks was used as pre-processor, which performed the three- dimensional solid construction and automatic enmeshment. The COSMOS was adopted as post- processor to display the temperature distribution and further to simulate the thermal stress distribution of dies. A software package for three-dimensional temperature fields of complicated die casting and its dies was developed and the temperature distributions of a fan cover casting were simulated by the software.
