Corrosion behavior of pure metals(Ni and Ti)and alloys(316H SS and GH3535)in liquid GaInSn

In this study,the interactions between a Ga-based liquid metal,GaInSn,and several metal materials,including pure metals(Ni and Ti)and alloys(316H stainless steel(SS)and GH3535),at 650℃were investigated.The aim was to evaluate the corrosion performance and select a suitable candidate material for use as a molten salt manometer diaphragm in thermal energy storage systems.The results indicated that the alloys(316H SS and GH3535)exhibited less corrosion than pure metals(Ni and Ti)in liquid GaInSn.Ga-rich binary intermetallic compounds were found to form on the surfaces of all the tested metal materials exposed to liquid GaInSn,as a result of the decomposition of liquid GaInSn and its reaction with the constituent elements of the metal materials.The corrosion mechanism for all the tested materials exposed to liquid GaInSn was also investigated and proposed,which may aid in selecting the optimal candidate material when liquid GaInSn is used as the pressure-sensing medium.

Behaviors of fine(IG-110)and ultra-fine(HPG-510)grain graphite irradiated by 7 MeV Xe^26+ions

Developing a molten salt reactor needs molten salt-impermeable nuclear graphite. Ultra-fine grain graphite is a good choice as it is better in permeability than fine grain graphite. In this paper, ultra-fine grain graphite(HPG-510) and fine grain graphite(IG-110) samples are irradiated at room temperature by 7 MeV Xe ions to doses of 1 × 10^(14)-5 × 10^(15) ions/cm^2. Scanning electron microscopy, transmission electron microscopy(TEM), Raman spectroscopy and nano-indentation are used to study the radiation-induced changes. After irradiation of different doses, all the HPG-510 samples show less surface fragment than the IG-110 samples. The TEM and Raman spectra,and the hardness and modulus characterized by nano-indentation, also indicate that HPG-510 is more resistant to irradiation.

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites（Ni–Si CNP）,with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy（TEM） was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening（Orowan effects） and particle strengthening（Hall–Petch effects）.For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.

Effects of Si Addition and Long-Term Thermal Exposure on the Tensile Properties of a Ni–Mo–Cr Superalloy

The effect of long-term thermal exposure on the grain boundary carbides and the tensile behavior of two kinds of Ni–Mo–Cr superalloys with different silicon contents（0 and 0.46 wt%） was investigated. Experimental results showed granular M2C carbides formed at the grain boundaries after exposure for 100 h for the non-silicon alloy. Furthermore, these fine granular M2C carbides will transform into plate-like M6C carbides as exposure time increases. For the Si-containing alloys,only the granular M6C carbides formed at the grain boundaries during the whole exposure time. The coarsening of the grain boundary carbides occurred in both alloys with increasing exposure time. In addition, the coarsening kinetics of the grain boundary carbides for the non-silicon alloy is faster than that of the standard alloy. The tensile properties of both alloys are improved after exposure for 100 h due to the formation of nano-sized grain boundary carbides. The grain boundary carbides are coarsened more seriously for non-silicon alloys than that of Si-containing alloys, resulting in a more significant decrease in the tensile strength and elongation for the former case. Silicon additions can effectively inhibit the severe coarsening of the grain boundary carbides and thus avoid the obvious deterioration of the tensile properties after a long-term thermal exposure.

Effect of Surface Decarburization on Corrosion Behavior of GH3535 Alloy in Molten Fluoride Salts

Corrosion test of a Ni–16Mo–7Cr alloy with a decarburized layer was conducted in FLiNaK salt at 700 °C. A detailed microstructure study was performed to investigate the corrosion behavior and mechanisms. The results show that the Ferich layers were formed on the corroded alloys with and without decarburization. The surface decarburization had little influence on the corrosion resistance of the alloy, whereas it caused more M_2C carbide formation beneath the corrosion layer. That is attributed to the higher concentration of C gradient near the alloy surface, which was resulted from the increase in C content liberated from graphite crucible wall during the corrosion process.

Irradiation Effects in Ni–17Mo–7Cr Alloy Bombarded with MeV Au Ions

Irradiation effects in Ni–17Mo–7Cr alloy have been systematically investigated by using 3 Me V Au ions at different fluences ranging from 8 × 10^13cm^-2to 2.3 × 10^15cm^-2,corresponding to doses of 1–30 dpa.The results indicated that sample microstrain increased gradually from 0.14 to 0.22% as dose increased from 0 to 30 dpa.Besides,the nanohardness of Ni–17Mo–7Cr alloy increased with irradiation dose until 10 dpa,and then,softening effect became dominant while further increasing dose to 30 dpa.After being irradiated at room temperature,the swelling rate of Ni–17Mo–7Cr alloy was found to be around 0.04% per dpa.These data are helpful in estimating the irradiation resistance of this newly developed Ni–17Mo–7Cr alloy in nuclear energy systems.