The Application of Solid Waste in Thermal Insulation Materials: A Review

As socioeconomic development continues,the issue of building energy consumption has attracted significant attention,and improving the thermal insulation performance of buildings has become a crucial strategic measure.Simultaneously,the application of solid waste in insulation materials has also become a hot topic.This paper reviews the sources and classifications of solid waste,focusing on research progress in its application as insulation materials in the domains of daily life,agriculture,and industry.The research shows that incorporating household solid waste materials,such as waste glass,paper,and clothing scraps into cementitious thermal insulation can significantly reduce the thermal conductivity of the materials,leading to excellent thermal insulation properties.Insulation materials prepared from agricultural solid waste,such as barley straw,corn stalk,chicken feather,and date palm fibers,possess characteristics of lightweight and strong thermal insulation.Industrial solid waste,including waste tires,iron tailings,and coal bottom ash,can also be utilized in the preparation of insulation materials.These innovative applications not only have positive environmental significance by reducing waste emissions and resource consumption,but also provide efficient and sustainable insulation solutions for the construction industry.However,to further optimize the mix design and enhance the durability of insulation materials,continuous research is required to investigate the mechanisms through which solid waste impacts the performance of insulation materials.

Effect of High Temperature Curing on the Frost Resistance of Recycled Aggregate Concrete and the Physical Properties of Second-Generation Recycled Coarse Aggregate under Freeze-Thaw Cycles

With the emphasis on environmental issues,the recycling of waste concrete,even recycled concrete,has become a hot spot in the field of architecture.But the repeated recycling of waste concrete used in harsh environments is still a complex problem.This paper discusses the durability and recyclability of recycled aggregate concrete(RAC)as a prefabricated material in the harsh environment,the effect of high-temperature curing(60℃,80℃,and 100℃)on the frost resistance of RAC and physical properties of the second generation recycled coarse aggregate(RCA_(2))of RAC after 300 freeze-thaw cycles were studied.The frost resistance of RAC was characterized by compressive strength,relative dynamic elastic modulus,and mass loss.As the physical properties of RCA_(2),the apparent density,water absorption,and crushing value were measured.And the SEM images of RAC after 300 freeze-thaw cycles were shown.The results indicated that the frost resistance of RAC cured at 80℃ for 7 days was comparable to that cured in the standard condition(cured for 28 days at 20℃±2℃ and 95%humidity),and the RAC cured at 100℃ was slightly worse.However,the frost resistance of RAC cured at 60℃ deteriorated seriously.The RAC cured at 80℃ for 7 days is the best.Whether after the freeze-thaw cycle or not,the RCA that curd at 60℃,80℃,and 100℃ for 7 days can also meet the requirements of Grade III RCA and be used as the aggregate of non-bearing part of prefabricated concrete components.RCA_(2) which is cured at 80℃ for 7 days had the best physical properties.

Temporal and spatial analysis of vegetation fire activity in the circum-Arctic during 2001–2020

Vegetation fires become the concern worldwide due to their substantial impacts on climate and environment,and in particular in the circum-Arctic.Assessing vegetation fires and associated emissions and causes can improve understanding of fire regime and provide helpful information for vegetation fires solution.In this study,satellitebased vegetation fires and emissions during 2001–2020 were investigated and contributions of different types of fires were analyzed.Furthermore,climate anomalies related to extreme vegetation fires were explored.The main results showed that the region south of the Arctic circle(50°N-67°N)experienced a greater number of vegetation fires compared to the Arctic(north of 67°N).During 2001–2020,interannual variability of vegetation fires between 50°N and 67°N appeared to be decreasing while emissions(including carbon,dry matter,PM_(2.5),and BC)appeared to be increasing overall,which were contributed by the increasing summer boreal forest fires in this region largely.In the Arctic,vegetation fires and emissions increased in recent years distinctly,and those were dominated by the summer forest fires.Spatially,large increases of vegetation fires were located in the eastern Siberia and northern North America while large decreases were located in the northwestern Eurasia mainly.Additionally,in the Arctic,the unprecedented vegetation fires were observed in the eastern Siberia and Alaska in 2019 and in the eastern Siberia in 2020,which could be attributed to high pressure,high near-surface temperature,and low air moisture anomalies.Meanwhile,obvious anticyclonic anomalies in Alaska in 2019 and in the eastern Siberia in 2020 and cyclonic anomalies in the western Siberia in 2019,also played an important role on fire occurrences making drier conditions.

Influence of South Asian Biomass Burning on Ozone and Aerosol Concentrations Over the Tibetan Plateau

In this work,the influence of South Asian biomass burning emissions on O_(3) and PM_(2.5)concentrations over the Tibetan Plateau(TP)is investigated by using the regional climate chemistry transport model WRF-Chem.The simulation is validated by comparing meteorological fields and pollutant concentrations against in situ observations and gridded datasets,providing a clear perspective on the spatiotemporal variations of O_(3) and PM_(2.5)concentrations across the Indian subcontinent,including the Tibetan Plateau.Further sensitivity simulations and analyses show that emissions from South Asian biomass burning mainly affect local O_(3) concentrations.For example,contribution ratios were up to 20%in the Indo-Gangetic Plain during the pre-monsoon season but below 1%over the TP throughout the year 2016.In contrast,South Asian biomass burning emissions contributed more than 60%of PM_(2.5)concentration over the TP during the pre-monsoon season via significant contribution of primary PM_(2.5)components(black carbon and organic carbon)in western India that were lofted to the TP by westerly winds.Therefore,it is suggested that cutting emissions from South Asian biomass burning is necessary to alleviate aerosol pollution over the TP,especially during the pre-monsoon season.

Fabrication and investigation of ferroelectric memristors with various synaptic plasticities

In the post-Moore era,neuromorphic computing has been mainly focused on breaking the von Neumann bottlenecks.Memristors have been proposed as a key part of neuromorphic computing architectures,and can be used to emulate the synaptic plasticities of the human brain.Ferroelectric memristors represent a breakthrough for memristive devices on account of their reliable nonvolatile storage,low write/read latency and tunable conductive states.However,among the reported ferroelectric memristors,the mechanisms of resistive switching are still under debate.In addition,there needs to be more research on emulation of the brain synapses using ferroelectric memristors.Herein,Cu/PbZr_(0.52)Ti_(0.48)O_(3)(PZT)/Pt ferroelectric memristors have been fabricated.The devices are able to realize the transformation from threshold switching behavior to resistive switching behavior.The synaptic plasticities,including excitatory post-synaptic current,paired-pulse facilitation,paired-pulse depression and spike time-dependent plasticity,have been mimicked by the PZT devices.Furthermore,the mechanisms of PZT devices have been investigated by first-principles calculations based on the interface barrier and conductive filament models.This work may contribute to the application of ferroelectric memristors in neuromorphic computing systems.

Optimization of Temperature Drop Formula for Annular Gathering Pipeline in High Water Cut Oil Region of Central Hebei Province

In order to respond to the national policy of energy saving and consumption reduction, the temperature drop formula of annular pipeline should be established to optimize the water mixing temperature and water mixing flow. The traditional temperature drop formula applies the high water cut actual situation to 13.7%. On the basis of the traditional Schulhof temperature drop formula, the influence of hydraulic friction on the oil flow temperature is calculated by the calculus idea. The heat transfer coefficient of the pipeline under the complex condition is obtained by the inverse algorithm, and the water mixing flow and water temperature are simulated with MATLAB. The function surface diagram of the degree and the back station temperature. The actual error can be reduced to 4.8%, and the return station temperature can be optimized by 7 degrees.