Influence of MoSi_(2) on oxidation protective ability of TaB_(2)-SiC coating in oxygen-containing environments within a broad temperature range

TaB_(2)-SiC coating modified by different content of MoSi_(2) was fabricated on graphite substrate with SiC inner coating by liquid phase sintering to elevate the anti-oxidation capability of the TaB_(2)-SiC coatings.As compared to the sample with the TaB_(2)-40wt% SiC coating,the coating sample modified with MoSi_(2) exhibited a weight gain trend at lower temperatures,the fastest weight loss rate went down by 76%,and the relative oxygen permeability value reduced from about 1% to near 0.More importantly,the large amount of SiO_(2) glass phase produced over the coating during oxidation was in contact with the modification of MoSi_(2),which was proved to be beneficial to the dispersion of Ta-oxides.A concomitantly formed continuous Ta-Si-O-B compound glass layer showed excellent capacity to prevent oxygen penetration.However,when the TaB_(2) content was sacrificed to increase the MoSi_(2) content,the relative oxygen permeability of the coating increased instead of decreased.Thus,on the basis of ample TaB_(2) content,increasing the MoSi_(2) content of the coating is conducive to reducing the relative oxygen permeability of the coatings in a broad temperature region.

Preparation of ZrB_(2)-MoSi_(2) high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis

To achieve high oxygen blocking structure of the ZrB_(2)-MoSi_(2) coating applied on carbon structural material,ZrB_(2)-MoSi_(2) coating was prepared by spark plasma sintering(SPS)method utilizing ZrB_(2)-MoSi_(2) composite powders synthesized by self-propagating high-temperature synthesis(SHS)technique as raw materials.The oxygen blocking mechanism of the ZrB_(2)-MoSi_(2) coatings at 1973 K was investigated.Compared with commercial powders,the coatings prepared by SHS powders exhibited superior density and inferior oxidation activity,which significantly heightened the structural oxygen blocking ability of the coatings in the active oxidation stage,thus characterizing higher oxidation protection efficiency.The rise of MoSi_(2) content facilitated the dispersion of transition metal oxide nanocrystals(5-20 nm)in the SiO_(2) glass layer and conduced to the increasing viscosity,thus strengthening the inerting impact of the compound glass layer in the inert oxidation stage.Nevertheless,the ZrB_(2)-40 vol% MoSi_(2) coating sample prepared by SHS powders presented the lowest oxygen permeability of 0.3% and carbon loss rate of 0.29×10^(6)g·cm^(-2)·s^(-1).Owing to the gradient oxygen partial pressure inside the coatings,the Si-depleted layer was developed under the compound glass layer,which brought about acute oxygen erosion.