Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibi...Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.展开更多
The interfacial instability of the poly(ethylene oxide)(PEO)-based electrolytes impedes the long-term cycling and further application of all-solid-state lithium metal batter-ies.In this work,we have shown an effective...The interfacial instability of the poly(ethylene oxide)(PEO)-based electrolytes impedes the long-term cycling and further application of all-solid-state lithium metal batter-ies.In this work,we have shown an effective additive 1-adaman-tanecarbonitrile,which con-tributes to the excellent per-formance of the poly(ethylene oxide)-based electrolytes.Owing to the strong interaction of the 1-Adamantanecarboni-trile to the polymer matrix and anions,the coordination of the Li^(+)-EO is weakened,and the binding effect of anions is strengthened,thereby improving the Li^(+)conductivity and the electrochemical stability.The diamond building block on the surface of the lithium anode can sup-press the growth of lithium dendrites.Importantly,the 1-Adamantanecarbonitrile also regulates the formation of LiF in the solid electrolyte interface and cathode electrolyte interface,which contributes to the interfacial stability(especially at high voltages)and protects the electrodes,enabling all-solid-state batteries to cycle at high voltages for long periods of time.Therefore,the Li/Li symmetric cell undergoes long-term lithium plating/stripping for more than 2000 h.1-Adamantanecarbonitrile-poly(ethylene oxide)-based LFP/Li and 4.3 V Ni_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li all-solid-state batteries achieved stable cycles for 1000 times,with capacity retention rates reaching 85%and 80%,respectively.展开更多
The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference(EMI)shielding materials to assure the normal operation of their closely assembled compo...The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference(EMI)shielding materials to assure the normal operation of their closely assembled components.However,the most current techniques are not adequate for the fabrication of shielding materials with programmable structure and controllable shielding efficiency.Herein,we demonstrate the direct ink writing of robust and highly conductive Ti3C2Tx MXene frames with customizable structures by using MXene/AlOOH inks for tunable EMI shielding and electromagnetic wave-induced thermochromism applications.The as-printed frames are reinforced by immersing in AlCl_(3)/HCl solution to remove the electrically insulating AlOOH nanoparticles,as well as cross-link the MXene sheets and fuse the filament interfaces with aluminum ions.After freeze-drying,the resultant robust and porous MXene frames exhibit tunable EMI shielding efficiencies in the range of 25-80 dB with the highest electrical conductivity of 5323 S m−1.Furthermore,an electromagnetic wave-induced thermochromic MXene pattern is assembled by coating and curing with thermochromic polydimethylsiloxane on a printed MXene pattern,and its color can be changed from blue to red under the high-intensity electromagnetic irradiation.This work demonstrates a direct ink printing of customizable EMI frames and patterns for tuning EMI shielding efficiency and visualizing electromagnetic waves.展开更多
A mathematical model of the particle heating process in the reaction shaft of flash smelting furnace was established and the calculation was performed.The results indicate that radiation plays a significant role in th...A mathematical model of the particle heating process in the reaction shaft of flash smelting furnace was established and the calculation was performed.The results indicate that radiation plays a significant role in the heat transfer process within the first 0.6 m in the upper part of the reaction shaft,whilst the convection is dominant in the area below 0.6 m for the particle heating.In order to accelerate the particle ignition,it is necessary to enhance the convection,thus to speed up the particle heating.A high-speed preheated oxygen jet technology was then suggested to replace the nature gas combustion in the flash furnace,aiming to create a lateral disturbance in the gaseous phase around the particles,so as to achieve a slip velocity between the two phases and a high convective heat transfer coefficient.Numerical simulation was carried out for the cases with the high-speed oxygen jet and the normal nature gas burners.The results show that with the high-speed jet technology,particles are heated up more rapidly and ignited much earlier,especially within the area of the radial range of R=0.3−0.6 m.As a result,a more efficient smelting process can be achieved under the same operational condition.展开更多
Schistosomiasis is one of the most prevalent parasitic diseases in China, and hepatic fibrosis caused by schistosome infection is the principal cause of death. The aim of this study was to evaluate the efficacy of NPl...Schistosomiasis is one of the most prevalent parasitic diseases in China, and hepatic fibrosis caused by schistosome infection is the principal cause of death. The aim of this study was to evaluate the efficacy of NPll-4- derived immunotoxin scFv-artesunate on Schistosoma japonicum-induced hepatic fibrosis. A single-chain variable fragment （scFv） was generated from the murine anti-Schistosoma japonicum （S. japanicum） monoclonal antibody NP11-4. The scFv was expressed as a soluble protein and purified by Ni-affinity chromatography. After conjuga- tion with artesunate, the binding ability with soluble egg antigens （SEA） was determined by an enzyme-linked immunosorbent assay （ELISA）. The biological activity of purified scFv, scFv-artesunate （immunotoxin）, and artesunate was detected in vivo. Image-Pro Plus software was used to analyze the size of egg granuloma and the extent of liver fibrosis. The recombinant scFv expession vector was constructed and expressed successfully. After purification by a His-trap Ni-affinity column, the scFv yield was approximately 0.8 mg/L of culture medium. ELISA results showed that chemical conjugation did not affect the binding activity of the immunotoxin. Our animal experiments indicated that the immunotoxin could significantly reduce the size of egg granuloma in the liver and inhibit hepatic fibrosis. The immunotoxin could be used as a promising candidate in the targeted therapy of S. .japonicum-induced hepatic fibrosis.展开更多
This paper first analyzes the important role of Nanfan Base in China: " accelerator" for breeding new varieties of crops; " unallocated store" to ensure the varieties for agricultural production; &...This paper first analyzes the important role of Nanfan Base in China: " accelerator" for breeding new varieties of crops; " unallocated store" to ensure the varieties for agricultural production; " lightning rod" to ensure the quality and safety of seeds; " big stage" for variety and technical exchanges and cooperation; " big school" for cultivating seed industry technology talents; " booster" for promoting local economic development. Then it points out the main problems about Nanfan Base and finally sets forth the relevant recommendations.展开更多
AIM：To describe a novel technique of creating a landing strip within the trabecular meshwork to guide trabecular micro-bypass stent（iStent） implantation in patients who underwent phacoemulsification.METHODS：Thirty...AIM：To describe a novel technique of creating a landing strip within the trabecular meshwork to guide trabecular micro-bypass stent（iStent） implantation in patients who underwent phacoemulsification.METHODS：Thirty-four eyes from 30 patients who underwent i Stent implantation after phacoemulsification from May 2014 to February 2015 were included in our retrospective study. All iStents were implanted via the ＂landing strip＂ technique. A 25-gauge microvitreoretinal blade was used to bisect the trabecular meshwork to less than 1 clock-hour, effectively creating a landing strip. The iStent applicator was pressed along the landing strip and then the stent was released into the trabecular meshwork. RESULTS：Of the 34 eyes with iStent implantation, 27（79.4%） eyes had primary open-angle glaucoma, 6（17.6%） eyes had pseudoexfoliation glaucoma, and 1（2.9%） eye had ocular hypertension. At 6-month follow-up（n=17）, the mean number of hypotensive medications decreased from 2.2±1.2 at baseline to 0.8±1.3（P=0.05） and mean intraocular pressure decreased from 19.7±4.1 mm Hg at baseline to 16.7±2.1 mm Hg（P=0.58）. Two eyes（5.9%） required subsequent trabeculectomy. CONCLUSION：The ＂landing strip＂ technique appears to be an effective way to assist with iS tent implantation.展开更多
In this paper, we present a 1.8-kV circular AlGaN/GaN/AlGaN double-heterostructure high electron mobility transistor(DH HEMT) with a gate-drain spacing L_(GD)= 18.8 μm. Compared with the regular DH HEMT, our circular...In this paper, we present a 1.8-kV circular AlGaN/GaN/AlGaN double-heterostructure high electron mobility transistor(DH HEMT) with a gate-drain spacing L_(GD)= 18.8 μm. Compared with the regular DH HEMT, our circular structure has a high average breakdown electric-field strength that increases from 0.42 MV/cm to 0.96 MV/cm. The power figure of meritV_(BR)~2/RON for the circular HEMT is as high as 1.03 ×10~9 V^2·Ω^(-1)·cm^(-2). The divergence of electric field lines at the gate edge and no edge effect account for the breakdown enhancement capability of the circular structure. Experiments and analysis indicate that the circular structure is an effective method to modulate the electric field.展开更多
The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfull...The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfully dope the single crystalline ZnO with Ag by the laser-induced method,which can effectively further post-treat grown samples.Magnetron sputtering was used to coat the Ag film with a thickness of about 50 nm on the single crystalline ZnO.Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser was chosen to irradiate the Ag-capped ZnO samples,followed by annealing at700℃for two hours to form ZnO:Ag.The three-dimensional(3D)information of the elemental distribution of Ag in ZnO was obtained through time-of-flight secondary ion mass spectrometry(TOF-SIMS).TOF-SIMS and core-level x-ray photoelectron spectroscopy(XPS)demonstrated that the Ag impurities could be effectively doped into single crystalline ZnO samples as deep as several hundred nanometers.Obvious broadening of core level XPS profiles of Ag from the surface to depths of hundred nms was observed,indicating the variance of chemical state changes in laser-induced Ag-doped ZnO.Interesting features of electronic mixing states were detected in the valence band XPS of ZnO:Ag,suggesting the strong coupling or interaction of Ag and ZnO in the sample rather than their simple mixture.The Ag-doped ZnO also showed a narrower bandgap and a decrease in thermal diffusion coefficient compared to the pure ZnO,which would be beneficial to thermoelectric performance.展开更多
Exponential estimates and sufficient conditions for the exponential synchronization of complex dynamical networks with bounded time-varying delays are given in terms of linear matrix inequalities （LMIs）. A generaliz...Exponential estimates and sufficient conditions for the exponential synchronization of complex dynamical networks with bounded time-varying delays are given in terms of linear matrix inequalities （LMIs）. A generalized complex networks model involving both neutral delays and retarded ones is presented. The exponential synchronization problem of the complex networks is converted equivalently into the exponential stability problem of a group of uncorrelated delay functional differential equations with mixed timevarying delays. By utilizing the free weighting matrix technique, a less conservative delay-dependent synchronization criterion is derived. An illustrative example is provided to demonstrate the effectiveness of the proposed method.展开更多
Person re-identification(re-ID)aims to match images of the same pedestrian across different cameras.It plays an important role in the field of security and surveillance.Although it has been studied for many years,it i...Person re-identification(re-ID)aims to match images of the same pedestrian across different cameras.It plays an important role in the field of security and surveillance.Although it has been studied for many years,it is still considered as an unsolved problem.Since the rise of deep learning,the accuracy of supervised person re-ID on public datasets has reached the highest level.However,these methods are difficult to apply to real-life scenarios because a large number of labeled training data is required in this situation.Pedestrian identity labeling,especially cross-camera pedestrian identity labeling,is heavy and expensive.Why we cannot apply the pre-trained model directly to the unseen camera network?Due to the existence of domain bias between source and target environment,the accuracy on target dataset is always low.For example,the model trained on the mall needs to adapt to the new environment of airport obviously.Recently,some researches have been proposed to solve this problem,including clustering-based methods,GAN-based methods,co-training methods and unsupervised domain adaptation methods.展开更多
Strontium titanate（SrTiO3） is a promising n-type material for thermoelectric applications. However, its relatively high thermal conductivity limits its performance in efficiently converting heat into electrical powe...Strontium titanate（SrTiO3） is a promising n-type material for thermoelectric applications. However, its relatively high thermal conductivity limits its performance in efficiently converting heat into electrical power through thermoelectric effect.This work shows that the thermal conductivity of SrTiO3 can be effectively reduced by annealing treatments, through an integrated study of laser flash measurement, scanning electron microscopy, Fourier transform infrared spectroscopy, x-ray absorption fine structure, and first-principles calculations. A phonon scattering model is proposed to explain the reduction of thermal conductivity after annealing. This work suggests a promising means to characterize and optimize the material for thermoelectric applications.展开更多
Weak value amplification has shown its superiority in measurement of small physical effects. Here we introduce a signal-recycled weak-value-based velocity measurement strategy to decrease the attenuation of detected p...Weak value amplification has shown its superiority in measurement of small physical effects. Here we introduce a signal-recycled weak-value-based velocity measurement strategy to decrease the attenuation of detected photons during the post-selection. Like the power-recycled scheme, we can improve the number of detected photons and signal-to-noise ratio of velocity by forming a cavity. However, optimal improvements of number of detected photons and signal-to-noise ratio cannot be obtained simultaneously in our signal-recycled scheme owing to the walk-off effect. Furthermore, we find that the reflected light is relatively strong compared with the power-recycled scheme, which may increase the collection-detection efficiency in prospective relevant experiment.展开更多
基金supported by National Natural Science Foundation of China(Grant No.U1930113),ChinaNational Natural Science Foundation of China(52072036)
文摘Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.
基金supported by National Natural Science Foundation of China(Grant No.22209012).
文摘The interfacial instability of the poly(ethylene oxide)(PEO)-based electrolytes impedes the long-term cycling and further application of all-solid-state lithium metal batter-ies.In this work,we have shown an effective additive 1-adaman-tanecarbonitrile,which con-tributes to the excellent per-formance of the poly(ethylene oxide)-based electrolytes.Owing to the strong interaction of the 1-Adamantanecarboni-trile to the polymer matrix and anions,the coordination of the Li^(+)-EO is weakened,and the binding effect of anions is strengthened,thereby improving the Li^(+)conductivity and the electrochemical stability.The diamond building block on the surface of the lithium anode can sup-press the growth of lithium dendrites.Importantly,the 1-Adamantanecarbonitrile also regulates the formation of LiF in the solid electrolyte interface and cathode electrolyte interface,which contributes to the interfacial stability(especially at high voltages)and protects the electrodes,enabling all-solid-state batteries to cycle at high voltages for long periods of time.Therefore,the Li/Li symmetric cell undergoes long-term lithium plating/stripping for more than 2000 h.1-Adamantanecarbonitrile-poly(ethylene oxide)-based LFP/Li and 4.3 V Ni_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li all-solid-state batteries achieved stable cycles for 1000 times,with capacity retention rates reaching 85%and 80%,respectively.
基金support from the National Natural Science Foundation of China(51922020,52090034)the Fundamental Research Funds for the Central Universities(BHYC1707B)。
文摘The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference(EMI)shielding materials to assure the normal operation of their closely assembled components.However,the most current techniques are not adequate for the fabrication of shielding materials with programmable structure and controllable shielding efficiency.Herein,we demonstrate the direct ink writing of robust and highly conductive Ti3C2Tx MXene frames with customizable structures by using MXene/AlOOH inks for tunable EMI shielding and electromagnetic wave-induced thermochromism applications.The as-printed frames are reinforced by immersing in AlCl_(3)/HCl solution to remove the electrically insulating AlOOH nanoparticles,as well as cross-link the MXene sheets and fuse the filament interfaces with aluminum ions.After freeze-drying,the resultant robust and porous MXene frames exhibit tunable EMI shielding efficiencies in the range of 25-80 dB with the highest electrical conductivity of 5323 S m−1.Furthermore,an electromagnetic wave-induced thermochromic MXene pattern is assembled by coating and curing with thermochromic polydimethylsiloxane on a printed MXene pattern,and its color can be changed from blue to red under the high-intensity electromagnetic irradiation.This work demonstrates a direct ink printing of customizable EMI frames and patterns for tuning EMI shielding efficiency and visualizing electromagnetic waves.
基金funded by Jinguan Copper of Tongling Non-ferrous Metals Group Co., Ltd.
文摘A mathematical model of the particle heating process in the reaction shaft of flash smelting furnace was established and the calculation was performed.The results indicate that radiation plays a significant role in the heat transfer process within the first 0.6 m in the upper part of the reaction shaft,whilst the convection is dominant in the area below 0.6 m for the particle heating.In order to accelerate the particle ignition,it is necessary to enhance the convection,thus to speed up the particle heating.A high-speed preheated oxygen jet technology was then suggested to replace the nature gas combustion in the flash furnace,aiming to create a lateral disturbance in the gaseous phase around the particles,so as to achieve a slip velocity between the two phases and a high convective heat transfer coefficient.Numerical simulation was carried out for the cases with the high-speed oxygen jet and the normal nature gas burners.The results show that with the high-speed jet technology,particles are heated up more rapidly and ignited much earlier,especially within the area of the radial range of R=0.3−0.6 m.As a result,a more efficient smelting process can be achieved under the same operational condition.
基金supported by a grant from the National High Technology Research and Development Program of China ("863"ProgramNo.2006AA02Z415)
文摘Schistosomiasis is one of the most prevalent parasitic diseases in China, and hepatic fibrosis caused by schistosome infection is the principal cause of death. The aim of this study was to evaluate the efficacy of NPll-4- derived immunotoxin scFv-artesunate on Schistosoma japonicum-induced hepatic fibrosis. A single-chain variable fragment （scFv） was generated from the murine anti-Schistosoma japonicum （S. japanicum） monoclonal antibody NP11-4. The scFv was expressed as a soluble protein and purified by Ni-affinity chromatography. After conjuga- tion with artesunate, the binding ability with soluble egg antigens （SEA） was determined by an enzyme-linked immunosorbent assay （ELISA）. The biological activity of purified scFv, scFv-artesunate （immunotoxin）, and artesunate was detected in vivo. Image-Pro Plus software was used to analyze the size of egg granuloma and the extent of liver fibrosis. The recombinant scFv expession vector was constructed and expressed successfully. After purification by a His-trap Ni-affinity column, the scFv yield was approximately 0.8 mg/L of culture medium. ELISA results showed that chemical conjugation did not affect the binding activity of the immunotoxin. Our animal experiments indicated that the immunotoxin could significantly reduce the size of egg granuloma in the liver and inhibit hepatic fibrosis. The immunotoxin could be used as a promising candidate in the targeted therapy of S. .japonicum-induced hepatic fibrosis.
基金Supported by Fund Project of Hubei Agricultural Science and Technology Innovation Center(2007-620-003-03-05)
文摘This paper first analyzes the important role of Nanfan Base in China: " accelerator" for breeding new varieties of crops; " unallocated store" to ensure the varieties for agricultural production; " lightning rod" to ensure the quality and safety of seeds; " big stage" for variety and technical exchanges and cooperation; " big school" for cultivating seed industry technology talents; " booster" for promoting local economic development. Then it points out the main problems about Nanfan Base and finally sets forth the relevant recommendations.
文摘AIM：To describe a novel technique of creating a landing strip within the trabecular meshwork to guide trabecular micro-bypass stent（iStent） implantation in patients who underwent phacoemulsification.METHODS：Thirty-four eyes from 30 patients who underwent i Stent implantation after phacoemulsification from May 2014 to February 2015 were included in our retrospective study. All iStents were implanted via the ＂landing strip＂ technique. A 25-gauge microvitreoretinal blade was used to bisect the trabecular meshwork to less than 1 clock-hour, effectively creating a landing strip. The iStent applicator was pressed along the landing strip and then the stent was released into the trabecular meshwork. RESULTS：Of the 34 eyes with iStent implantation, 27（79.4%） eyes had primary open-angle glaucoma, 6（17.6%） eyes had pseudoexfoliation glaucoma, and 1（2.9%） eye had ocular hypertension. At 6-month follow-up（n=17）, the mean number of hypotensive medications decreased from 2.2±1.2 at baseline to 0.8±1.3（P=0.05） and mean intraocular pressure decreased from 19.7±4.1 mm Hg at baseline to 16.7±2.1 mm Hg（P=0.58）. Two eyes（5.9%） required subsequent trabeculectomy. CONCLUSION：The ＂landing strip＂ technique appears to be an effective way to assist with iS tent implantation.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB0400100)the National Natural Science Foundation of China(Grant Nos.11435010,61474086,and 61804125)the Natural Science Basic Research Program of Shaanxi Province,China(Grant No.2016ZDJC-02)
文摘In this paper, we present a 1.8-kV circular AlGaN/GaN/AlGaN double-heterostructure high electron mobility transistor(DH HEMT) with a gate-drain spacing L_(GD)= 18.8 μm. Compared with the regular DH HEMT, our circular structure has a high average breakdown electric-field strength that increases from 0.42 MV/cm to 0.96 MV/cm. The power figure of meritV_(BR)~2/RON for the circular HEMT is as high as 1.03 ×10~9 V^2·Ω^(-1)·cm^(-2). The divergence of electric field lines at the gate edge and no edge effect account for the breakdown enhancement capability of the circular structure. Experiments and analysis indicate that the circular structure is an effective method to modulate the electric field.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFB3605403)。
文摘The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfully dope the single crystalline ZnO with Ag by the laser-induced method,which can effectively further post-treat grown samples.Magnetron sputtering was used to coat the Ag film with a thickness of about 50 nm on the single crystalline ZnO.Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser was chosen to irradiate the Ag-capped ZnO samples,followed by annealing at700℃for two hours to form ZnO:Ag.The three-dimensional(3D)information of the elemental distribution of Ag in ZnO was obtained through time-of-flight secondary ion mass spectrometry(TOF-SIMS).TOF-SIMS and core-level x-ray photoelectron spectroscopy(XPS)demonstrated that the Ag impurities could be effectively doped into single crystalline ZnO samples as deep as several hundred nanometers.Obvious broadening of core level XPS profiles of Ag from the surface to depths of hundred nms was observed,indicating the variance of chemical state changes in laser-induced Ag-doped ZnO.Interesting features of electronic mixing states were detected in the valence band XPS of ZnO:Ag,suggesting the strong coupling or interaction of Ag and ZnO in the sample rather than their simple mixture.The Ag-doped ZnO also showed a narrower bandgap and a decrease in thermal diffusion coefficient compared to the pure ZnO,which would be beneficial to thermoelectric performance.
基金supported by the National Key Fundamental Re-search Program (No. 2002CB312201-03)the National NaturalScience Foundation of China (No. 60575036)
文摘Exponential estimates and sufficient conditions for the exponential synchronization of complex dynamical networks with bounded time-varying delays are given in terms of linear matrix inequalities （LMIs）. A generalized complex networks model involving both neutral delays and retarded ones is presented. The exponential synchronization problem of the complex networks is converted equivalently into the exponential stability problem of a group of uncorrelated delay functional differential equations with mixed timevarying delays. By utilizing the free weighting matrix technique, a less conservative delay-dependent synchronization criterion is derived. An illustrative example is provided to demonstrate the effectiveness of the proposed method.
文摘Person re-identification(re-ID)aims to match images of the same pedestrian across different cameras.It plays an important role in the field of security and surveillance.Although it has been studied for many years,it is still considered as an unsolved problem.Since the rise of deep learning,the accuracy of supervised person re-ID on public datasets has reached the highest level.However,these methods are difficult to apply to real-life scenarios because a large number of labeled training data is required in this situation.Pedestrian identity labeling,especially cross-camera pedestrian identity labeling,is heavy and expensive.Why we cannot apply the pre-trained model directly to the unseen camera network?Due to the existence of domain bias between source and target environment,the accuracy on target dataset is always low.For example,the model trained on the mall needs to adapt to the new environment of airport obviously.Recently,some researches have been proposed to solve this problem,including clustering-based methods,GAN-based methods,co-training methods and unsupervised domain adaptation methods.
基金supported by the National Natural Science Foundation of China(Grant Nos.U1332105,51475396,11335006,21103109,21176152,and 21373137)the Natural Science Foundation of Fujian Province of China(Grant No.2013J01026)the Fundamental Research Funds for Central Universities of China(Grant Nos.2013121012,20720140517,20720160013,and 20720160020)
文摘Strontium titanate（SrTiO3） is a promising n-type material for thermoelectric applications. However, its relatively high thermal conductivity limits its performance in efficiently converting heat into electrical power through thermoelectric effect.This work shows that the thermal conductivity of SrTiO3 can be effectively reduced by annealing treatments, through an integrated study of laser flash measurement, scanning electron microscopy, Fourier transform infrared spectroscopy, x-ray absorption fine structure, and first-principles calculations. A phonon scattering model is proposed to explain the reduction of thermal conductivity after annealing. This work suggests a promising means to characterize and optimize the material for thermoelectric applications.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11674120 and 11734015)the Fundamental Research Funds for the Central Universities of the Ministry of Education of China (Grant Nos. CCNU19TS074 and CCNU18CXTD01)。
文摘Weak value amplification has shown its superiority in measurement of small physical effects. Here we introduce a signal-recycled weak-value-based velocity measurement strategy to decrease the attenuation of detected photons during the post-selection. Like the power-recycled scheme, we can improve the number of detected photons and signal-to-noise ratio of velocity by forming a cavity. However, optimal improvements of number of detected photons and signal-to-noise ratio cannot be obtained simultaneously in our signal-recycled scheme owing to the walk-off effect. Furthermore, we find that the reflected light is relatively strong compared with the power-recycled scheme, which may increase the collection-detection efficiency in prospective relevant experiment.
