草酸预处理AM50镁合金表面快速原位制备 蒸汽Mg−Al LDH涂层的耐蚀性

通过暴露合金表面的金属间化合物(β-Mg17Al12和AlMn),研究草酸(OA)酸洗对AM50镁合金表面原位蒸汽Mg−Al层状双氢氧化物(LDH)涂层成膜机制和耐蚀性的影响。结果表明,OA预处理使镁合金表面金属间化合物比例显著增加,Mg−Al LDH在Al−Mn相周围成核并生长。当酸洗时间为45 s时,所得LDH涂层的厚度最大、耐蚀性最佳,与基体相比,其腐蚀电流密度降低3个数量级。最后,提出了AM50镁合金表面Mg−Al LDH涂层的成膜机制。

Corrosion resistance of Mg-Al-LDH steam coating on AZ80 Mg alloy:Effects of citric acid pretreatment and intermetallic compounds

In this study,the effects of intermetallic compounds(Mg_(17)Al_(12)and Al_(8)Mn_(5))on the Mg-Al layered double hydroxide(LDH)formation mechanism and corrosion behavior of an in-situ LDH/Mg(OH)_(2)steam coatings on AZ80 Mg alloy were investigated.Citric acid(CA)was used to activate the alloy surface during the pretreatment process.The alloy was first pretreated with CA and then subjected to a hydrothermal process using ultrapure water to produce Mg-Al-LDH/Mg(OH)_(2)steam coating.The effect of different time of acid pretreatment on the activation of the intermetallic compounds was investigated.The microstructure and elemental composition of the obtained coatings were analyzed using FE-SEM,EDS,XRD and FT-IR.The corrosion resistance of the coated samples was evaluated using different techniques,i.e.,potentiodynamic polarization(PDP),electrochemical impedance spectrum(EIS)and hydrogen evolution test.The results indicated that the CA pretreatment significantly influenced the activity of the alloy surface by exposing the intermetallic compounds.The surface area fraction of Mg_(17)Al_(12)and Al_(8)Mn_(5)phases on the surface of the alloy was significantly higher after the CA pretreatment,and thus promoted the growth of the subsequent Mg-Al-LDH coatings.The CA pretreatment for 30 s resulted in a denser and thicker LDH coating.Increase in the CA pretreatment time significantly led to the improvement in corrosion resistance of the coated AZ80 alloy.The corrosion current density of the coated alloy was lower by three orders of magnitude as compared to the uncoated alloy.

In vitro corrosion resistance and antibacterial properties of layer-by-layer assembled chitosan/poly-L-glutamic acid coating on AZ31 magnesium alloys

Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.

Metabolic derivatives of alcohol and the molecular culpritsof fibro-hepatocarcinogenesis:Allies or enemies?

Chronic intake of alcohol undoubtedly overwhelms the structural and functional capacity of the liver by initiating complex pathological events characterized by steatosis,steatohepatitis,hepatic fibrosis and cirrhosis.Subsequently,these initial pathological events are sustained and ushered into a more complex and progressive liver disease,increasing the risk of fibrohepatocarcinogenesis.These coordinated pathological events mainly result from buildup of toxic metabolic derivatives of alcohol including but not limited to acetaldehyde(AA),malondialdehyde(MDA),CYP2E1-generated reactive oxygen species,alcohol-induced gut-derived lipopolysaccharide,AA/MDA protein and DNA adducts.The metabolic derivatives of alcohol together with other comorbidity factors,including hepatitis B and C viral infections,dysregulated iron metabolism,abuse of antibiotics,schistosomiasis,toxic drug metabolites,autoimmune disease and other non-specific factors,have been shown to underlie liver diseases.In view of the multiple etiology of liver diseases,attempts to delineate the mechanism by which each etiological factor causes liver disease has always proved cumbersome if not impossible.In the case of alcoholic liver disease(ALD),it is even more cumbersome and complicated as a result of the many toxic metabolic derivatives of alcohol with their varying liver-specific toxicities.In spite of all these hurdles,researchers and experts in hepatology have strived to expand knowledge and scientific discourse,particularly on ALD and its associated complications through the medium of scientific research,reviews and commentaries.Nonetheless,the molecularmechanisms underpinning ALD,particularly those underlying toxic effects of metabolic derivatives of alcohol on parenchymal and non-parenchymal hepatic cells leading to increased risk of alcohol-induced fibrohepatocarcinogenesis,are still incompletely elucidated.In this review,we examined published scientific findings on how alcohol and its metabolic derivatives mount cellular attack on each hepatic cell and the underlying molecular mechanisms leading to disruption of core hepatic homeostatic functions which probably set the stage for the initiation and progression of ALD to fibro-hepatocarcinogenesis.We also brought to sharp focus,the complex and integrative role of transforming growth factor beta/small mothers against decapentaplegic/plasminogen activator inhibitor-1 and the mitogen activated protein kinase signaling nexus as well as their cross-signaling with toll-like receptormediated gut-dependent signaling pathways implicated in ALD and fibro-hepatocarcinogenesis.Looking into the future,it is hoped that these deliberations may stimulate new research directions on this topic and shape not only therapeutic approaches but also models for studying ALD and fibro-hepatocarcinogenesis.

Influence of intermetallic Al-Mn particles on in-situ steam Mg-Al-LDH coating on AZ31 magnesium alloy

The influence of intermetallic Al-Mn particles on the corrosion behavior of in-situ formed Mg-Al layered double hydroxide(Mg-Al-CO32--LDH)steam coating on AZ31 Mg alloy was investigated.The alloy was pretreated with H3PO4,HCl,HNO3or citric acid(CA),followed by hydrothermal treatment,for the fabrication of Mg-Al-LDH coating.The microstructure,composition and corrosion resistance of the coated samples were investigated.The results showed that the surface area fraction of Al-Mn phase exposed on the surface of the alloy was significantly increased after CA pretreatment,which promotes the growth of the Mg-Al-LDH steam coating.Further,the LDH-coated alloy pretreated with CA possessed the most compact surface and the maximum coating thickness among all the coatings.The corrosion current density of the coated alloy was decreased by three orders of magnitude as compared to that of the bare alloy.

In vitro degradation resistance of glucose and L-cysteine-bioinspired Schiff-base anodic Ca−P coating on AZ31 magnesium alloy

A Schiff base(a compound containing a C=N bond)induced anodic Ca−P coating was prepared on AZ31 Mg alloy in a mixed solution of CaCl_(2) and KH_(2)PO_(4) at 60℃ in the presence of glucose and L-cysteine.The microstructure and chemical composition of the coatings were characterized using FE-SEM,FT-IR,XRD,and XPS.The in vitro degradation resistance of the coated samples was evaluated via potentiodynamic polarization(PDP),electrochemical impedance spectroscopy(EIS),and hydrogen evolution test.The experimental results show that the Ca−PSchiff base coating is composed of CaHPO_(4)(DCPA)and hydroxyapatite(HA),whereas HA is not present in the Ca−P coating.The Ca−P_(Schiff base) coating thickness is about 2 times that of Ca−P coating(Ca−P coating:(9.13±4.20)μm and Ca−P_(Schiff base):(18.13±5.78)μm).The corrosion current density of the Ca−P_(Schiff base) coating is two orders of magnitude lower than that of the Ca−P coating.The formation mechanism of the Ca−P_(Schiff base) is proposed.

In vitro degradation and multi-antibacterial mechanisms ofβ-cyclodextrin@curcumin embodied Mg(OH)_(2)/MAO coating on AZ31 magnesium alloy

It is a challenging task to prepare a coating on Mg alloys for desirable corrosion resistance,good antibac-terial ability and biocompatibility.In this research work,an in-situ Mg(OH)_(2)coating incorporated with sodium alginate(SA)andβ-cyclodextrin(β-CD)@curcumin(Cur)was formed on the surface of micro arc oxidation(MAO)coated AZ31 alloy via a low temperature hydrothermal method.Characterization tech-niques such as X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectrometer(FT-IR)and scanning electron microscope(SEM)were employed to characterize the chemi-cal composition and surface morphology of the coatings.The corrosion protection ability of the coatings was monitored via electrochemical polarization,hydrogen evolution and immersion tests.Photothermal antibacterial ability and cytocompatibility of the coatings were evaluated by plate counting method under the irradiation of 808 nm-near infrared light,in vitro cytotoxicity tests(MTT)and live/dead cell staining.The results indicate that a chelation of the organic molecules led to the formation of a MAO/(β-CD@Cur)-SA-Mg(OH)_(2)coating with excellent corrosion protection,multi-antibacterial ability and almost no toxic-ity to the cells.Especially,the coating provided photothermal performance through the light absorption of Cur,which was encapsulated byβ-CD to improve its bioavailability.SA enhanced the binding force between the drug and the substrate.This novel coating designated the potential application on bioab-sorbable magnesium alloys.

In vitro corrosion resistance and antibacterial performance of noveltin dioxide-doped calcium phosphate coating on degradable Mg-1Li-1Ca alloy

A SnO_2-doped calcium phosphate(Ca-P-Sn) coating was constructed on Mg-1 Li-1 Ca alloy by a hydrothermal process. The fabricated functional coatings were investigated using scanning electron microscopy(SEM), X-ray diffraction(XRD) and Fourier transform infrared spectroscopy(FT-IR). A triple-layered structure, which is composed of Ca_3(PO_4)_2,(Ca, Mg)_3(PO_4)_2, SnO_2, and MgHPO_4·3 H_2O, is evident and leads to the formation of Ca_(10)(PO_4)_6(OH)_2 in Hank's solution. Electrochemical measurements, hydrogen evolution tests and plating counts reveal that the corrosion resistance and antibacterial activity were improved through the coating treatment. The embedded SnO_2 nanoparticles enhanced crystallisation of the coating.The formation and degradation mechanisms of the coating were discussed.

Advance in Antibacterial Magnesium Alloys and Surface Coatings on Magnesium Alloys:A Review

Magnesium(Mg)alloys as a bioabsorbable light metal have shown great clinical potential as bone replacement implants.In this review,the categories,progress in cutting-edge preparation technologies and antibacterial mechanisms of Mg alloys and considerable numbers of corrosion-resistant and functional coatings are summarized.The relationship among the microstructure(grain size,intermetallic compounds),biocorrosion resistance and biocompatibility for antibacterial Mg alloys is discussed.The challenge and outlooks of biomedical Mg alloys and coatings are proposed from an antibacterial perspective.

Biocorrosion resistance and biocompatibility of Mg-AI layered double hydroxide/poly(L-lactic acid) hybrid coating on magnesium alloy AZ31

A Mg-AI layered double hydroxide(Mg-AI-LDH)coating was firstly synthesized via an in-situ steam coating growth method on the AZ31 Mg alloy,and then was modified with poly(L-lactic acid)(PLLA)via dipping and vacuum freeze-drying.The microstructure and composition of LDH/PLLA hybrid coating were analyzed by XRD,SEM,EDS and FT-IR.The biocorrosion behavior of hybrid coating was evaluated by potentiodynamic polarization,electrochemical impedance spectroscopy(EIS)and hydrogen evolution test in the Hank's solution.The results showed that LDH/PLLA coatings exhibited a much dense layer compared to the unmodified Mg-AI-LDH coating with unobvious boundary between PLLA and LDH coatings.The corrosion current density of the LDH/PLLA-10 hybrid coating decreased three orders of magnitude in comparison to its substrate.It was proven that the existence of the PLLA coating further prolonged the service life of the Mg-AI-LDH coating.What's more,the MTT assay and livel dead staining showed that the LDH/PLL A-10 coating had good biocompatibility for Mouse NIH3T3 fibroblasts.The formation mechanism and the anti-corrosion mechanism of hybrid coatings were proposed.

In vitro corrosion of magnesium alloy AZ31-a synergetic influence of glucose and Tris

Biodegradable Mg alloys have generated great interest for biomedical applications. Accurate predictions of in vivo degradation of Mg alloys through costeffective in vitro evaluations require the latter to be conducted in an environment close to that of physiological scenarios. However, the roles of glucose and buffering agents in regulating the in vitro degradation performance of Mg alloys has not been elucidated. Herein, degradation behavior of AZ31 alloy is investigated by hydrogen evolution measurements, pH monitoring and electrochemical tests. Results indicate that glucose plays a content-dependent role in degradation of AZ31 alloy in buffer-free saline solution. The presence of a low concentration of glucose, i.e. 1.0 g/L, decreases the corrosion rate of Mg alloy AZ31, whereas the presence of 2.0 and 3.0 glL glucose accelerates the corrosion rate during long term immersion in saline solution. In terms of Tris-buffered saline solution, the addition of glucose increases pH value and promotes pitting corrosion or general corrosion of AZ31 alloy. This study provides a novel perspective to understand the bio-corrosion of Mg alloys in buffering agents and glucose containing solutions.

Corrosion resistance of a novel SnO2-doped dicalcium phosphate coating on AZ31 magnesium alloy

A SnO2-doped dicalcium phosphate coating was prepared on AZ31 alloy by means of hydrothermal deposition.The results showed that the coating possessed a globular morphology with a long lamellar crystalline structure and a thickness of approximately 40 mm.The surface of the coating became smooth with an increase additive amount of the SnO2 nanoparticles.The corrosion current density and hydrogen evolution rate of the coating prepared in presence of SnO2 were reduced compared to the coating without SnO2 and the bare AZ31 substrate,indicating an improvement in the corrosion resistance of the SnO2-doped coating.

In vitro degradation,photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca-P coating on magnesium alloy AZ31

Surgical failures,caused by postoperative infections of bone implants,are commonly met,which cannot be treated precisely with intravenous antibiotics.Photothermal therapy(PTT)and photodynamic therapy(PDT)have attracted widespread attention due to their non-invasive antibacterial effects on tissues and no bacterial resistance,which may be an excellent approach to solve infections related to bone implants for biodegradable magnesium alloys.Herein,a sodium copper chlorophyllin(SCC)with a porphyrin ring induced Ca-P coating was prepared on AZ31 magnesium alloy via layer-by-layer(LbL)assembly.The morphology and composition of the samples were characterized through field emission scanning electron microscope(FE-SEM)with affiliated energy dispersive spectrometer(EDS),X-ray diffractometer(XRD),and Fourier infrared spectrometer(FTIR)and X-ray photoelectron spectrometer(XPS)as well.Potentiodynamic polarization,electrochemical impedance spectroscopy(EIS)and hydrogen evolution experiments were employed to evaluate the corrosion behavior of the samples.Atomic absorption spectrophotometer was used to measure Cu elemental content of different immersion periods.Cytocompatibility and antibacterial performance of the coatings were probed using in vitro cytotoxicity tests(MTT assay),live/dead cell staining and plate counting method.The results showed that the obtained(Ca-P/SCC)10 coating exhibited good corrosion resistance,antimicrobial activity(especially under 808 nm irradiation)and biocompatibility.The antibacterial rates for E.coli and S.aureus were 99.9%and 99.8%,respectively;and the photothermal conversion efficiency was as high as 42.1%.Triple antibacterial mechanisms including photodynamic,photothermal reactions and copper-ions release were proposed.This coating exhibited a promising application for biodegradable magnesium alloys.

Blood compatibility of zinc-calcium phosphate conversion coating on Mg-1.33Li-O.6Ca alloy

Magnesium alloys as a new class of biomaterials possess biodegradability and biocompatibility in comparison with currently used metal implants. However, their rapid corrosion rates are necessary to be manipulated by appropriate coatings. In this paper, a new attempt was used to develop a zinc-calcium phosphate （Zn-Ca-P） conversion coating on Mg-1.33Li-0.6Ca alloys to increase the biocompatibility and improve the corrosion resistance. In vitro blood biocompatibility of the alloy with and without the Zn-Ca-P coating was investigated to determine its suitability as a degradable medical biomaterial. Blood biocompatibility was assessed from the hemolysis test, the dynamic cruor time test, blood cell count and SEM observation of the platelet adhesion to membrane surface. The results showed that the Zn-Ca-P coating on Mg-1.33Li-0.6Ca alloys had good blood compatibility, which is in accordance with the requirements for medical biomaterials.