Effect of deformation parameters on the austenite dynamic recrystallization behavior of a eutectoid pearlite rail steel

Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the austenite dynamic recrystallization(DRX)behaviors of a eutectoid pearlite rail steel were studied using a thermo-mechanical simulator with hot deformation parameters frequently employed in rail production lines.The single-pass hot deformation results reveal that the prior austenite grain sizes(PAGSs)for samples with different deformation reductions decrease initially with an increase in deformation temperature.However,once the deformation temperature is beyond a certain threshold,the PAGSs start to increase.It can be attributed to the rise in DRX volume fraction and the increase of DRX grain with deformation temperature,respectively.Three-pass hot deformation results show that the accumulated strain generated in the first and second deformation passes can increase the extent of DRX.In the case of complete DRX,PAGS is predominantly determined by the deformation temperature of the final pass.It suggests a strategic approach during industrial production where part of the deformation reduction in low temperature range can be shifted to the medium temperature range to release rolling mill loads.

Intranasal boosting with RBD-HR protein vaccine elicits robust mucosal and systemic immune responses

The emergence of severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)variants has decreased the efficacy of SARs-CoV-2 vaccines in containing coronavirus disease 2019(CoVID-19)over time,and booster vaccination strategies are urgently necessitated to achieve sufficient protection.Intranasal immunization can improvemucosal immunity,offer-ing protection against the infection and sustaining the spread of SARS-CoV-2.In this study,an intranasal booster of the RBD-HR vaccine after two doses of the mRNA vaccine significantly increased the levels of specific binding antibodies in serum,nasal lavage fluid,and bronchoal-veolar lavage fluid compared with only two doses of mRNA vaccine.After intranasal boosting with the RBD-HR vaccine,the levels of serum neutralizing antibodies against prototype and variant strains of SARS-Cov-2 pseudoviruses weremarkedly higher than those in mice receiving mRNA vaccine alone,and intranasal boosting with the RBD-HR vaccine also inhibited the bind-ing of RBD to hACE2 receptors.Furthermore,the heterologous intranasal immunization regimen promoted extensive memory T cell responses and activated CD103+dendritic cells in the respiratory mucosa,and potently enhanced the formation of T follicular helper cells and germinal center B cells in vital immune organs,including mediastinal lymph nodes,inguinal lymph nodes,and spleen.Collectively,these data infer that heterologous intranasal boosting with the RBD-HR vaccine elicited broad protective immunity against SARS-CoV-2 both locallyandsystemically.

Martensitic twinning transformation mechanism in a metastable IVB element-based body-centered cubic high-entropy alloy with high strength and high work hardening rate

Realizing high work hardening and thus elevated strength–ductility synergy are prerequisites for the practical usage of body-centered-cubic high entropy alloys(BCC-HEAs).In this study,we report a novel dynamic strengthening mechanism,martensitic twinning transformation mechanism in a metastable refractory element-based BCC-HEA(TiZrHf)Ta(at.%)that can profoundly enhance the work hardening capability,leading to a large uniform ductility and high strength simultaneously.Different from conventional transformation induced plasticity(TRIP)and twinning induced plasticity(TWIP)strengthening mechanisms,the martensitic twinning transformation strengthening mechanism combines the best characteristics of both TRIP and TWIP strengthening mechanisms,which greatly alleviates the strengthductility trade-off that ubiquitously observed in BCC structural alloys.Microstructure characterization,carried out using X-ray diffraction(XRD)and electron back-scatter diffraction(EBSD)shows that,upon straining,α”(orthorhombic)martensite transformation,self-accommodation(SA)α”twinning and mechanicalα”twinning were activated sequentially.Transmission electron microscopy(TEM)analyses reveal that continuous twinning activation is inherited from nucleating mechanical{351}type I twins within SA“{351}”<■11>typeⅡtwinnedα”variants on{351}twinning plane by twinning transformation through simple shear,thereby accommodating the excessive plastic strain through the twinning shear while concurrently refining the grain structure.Consequently,consistent high work hardening rates of 2–12.5 GPa were achieved during the entire plastic deformation,leading to a high tensile strength of 1.3 GPa and uniform elongation of 24%.Alloy development guidelines for activating such martensitic twinning transformation strengthening mechanism were proposed,which could be important in developing new BCC-HEAs with optimal mechanical performance.

A new insight for stem cell therapy:apoptotic stem cells as a key player

Recently,two studies on therapeutic effects of stem cell therapy were published in Signal Transduction and Target Therapy1 and Nature Communications.2These studies have shed the light on a unique aspect of stem cell therapy which involves a previously unrecognized key player,namely apoptotic cells.These two publications have elucidated how the apoptotic cells exert immunomodulatory effects in stem cell therapy in several animal models.