In this study, the long-term thermal microstructural stability and related stress rupture lives of a new Re-containing Ni-based single-crystal superalloy, DD11, were investigated after high-temperature exposure for di...In this study, the long-term thermal microstructural stability and related stress rupture lives of a new Re-containing Ni-based single-crystal superalloy, DD11, were investigated after high-temperature exposure for different lengths of time. The results show that the γ' precipitates retained a cuboidal morphology and the γ' size increased after short thermal exposure for 50 h at 1,070℃. As the thermal exposure time was prolonged to 500 h, the cuboidal γ' gradually changed into irregular raft-like morphology due to particles coalescence, and the morphology of the microstructure was almost unchanged after further thermal exposure up to 3,000 h. The stress rupture experiments at 1,070℃ and a tensile stress of 140 MPa showed that the rupture lives increased significantly after thermal exposure for 50 h and dropped dramatically with increasing exposure time up to 500 h but decreased slowly after exposure for more than 500 h. These results imply that stress rupture properties did not decrease when the γ' remained cuboidal but degraded to different extents during the γ' coarsening process. The coarsening of the γ' precipitates and change in morphology were regarded as the main factors leading to the degradation of the stress rupture lives. This study provides fundamental information on the high-temperature longterm microstructural stability and mechanical performance, which will be of great help for DD11 alloy optimization and engineering aeroengine applications.展开更多
In this paper,the interrupted and ruptured creep tests were carried out in a novel second generation single crystal superalloy named DD11 at 1100℃/130 MPa.The alloy exhibited typical creep curve including primary,ste...In this paper,the interrupted and ruptured creep tests were carried out in a novel second generation single crystal superalloy named DD11 at 1100℃/130 MPa.The alloy exhibited typical creep curve including primary,steady,and tertiary three creep stages.The microstructural evolution at different stages of the creep were analyzed by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The results show that theγ′phases transform into rafted structure at the early stage of the steady creep and keep stable during the steady creep stage.As the creep goes on,the rafted structure further coarsens and the topological inversion occurs.In addition,at the primary creep,the dislocations mainly move in theγmatrix and pile up in theγ/γ′interface since the matrix channels widen slightly.The formation of the regular interfacial dislocation networks occurs at the early stage of the steady creep.Under the low stress,the dominated deformation mechanism during steady creep stage is the climbing of the〈010〉type edge dislocation.Furthermore,the effect of the deformation mechanism on creep property was discussed in detail.展开更多
基金funded by the National High Technology Research and Development Program(No.2012AA03A513)
文摘In this study, the long-term thermal microstructural stability and related stress rupture lives of a new Re-containing Ni-based single-crystal superalloy, DD11, were investigated after high-temperature exposure for different lengths of time. The results show that the γ' precipitates retained a cuboidal morphology and the γ' size increased after short thermal exposure for 50 h at 1,070℃. As the thermal exposure time was prolonged to 500 h, the cuboidal γ' gradually changed into irregular raft-like morphology due to particles coalescence, and the morphology of the microstructure was almost unchanged after further thermal exposure up to 3,000 h. The stress rupture experiments at 1,070℃ and a tensile stress of 140 MPa showed that the rupture lives increased significantly after thermal exposure for 50 h and dropped dramatically with increasing exposure time up to 500 h but decreased slowly after exposure for more than 500 h. These results imply that stress rupture properties did not decrease when the γ' remained cuboidal but degraded to different extents during the γ' coarsening process. The coarsening of the γ' precipitates and change in morphology were regarded as the main factors leading to the degradation of the stress rupture lives. This study provides fundamental information on the high-temperature longterm microstructural stability and mechanical performance, which will be of great help for DD11 alloy optimization and engineering aeroengine applications.
基金This study was financially supported by the National Natural Science Foundation of China(No.51471014).
文摘In this paper,the interrupted and ruptured creep tests were carried out in a novel second generation single crystal superalloy named DD11 at 1100℃/130 MPa.The alloy exhibited typical creep curve including primary,steady,and tertiary three creep stages.The microstructural evolution at different stages of the creep were analyzed by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The results show that theγ′phases transform into rafted structure at the early stage of the steady creep and keep stable during the steady creep stage.As the creep goes on,the rafted structure further coarsens and the topological inversion occurs.In addition,at the primary creep,the dislocations mainly move in theγmatrix and pile up in theγ/γ′interface since the matrix channels widen slightly.The formation of the regular interfacial dislocation networks occurs at the early stage of the steady creep.Under the low stress,the dominated deformation mechanism during steady creep stage is the climbing of the〈010〉type edge dislocation.Furthermore,the effect of the deformation mechanism on creep property was discussed in detail.
