瞬态液晶传热测量技术

本文介绍了作者在英国牛津大学发展的瞬态液晶传热测量技术。给出了叶片冷却通道内一侧壁上气膜孔附近、气膜孔与肋复合以及气膜孔与肋-槽复合的传热分布的详细图谱。瞬态液晶技术用于复杂几何表面传热系数高分辨率的测量是成功的。

Methods for a blind analysis of isobar data collected by the STAR collaboration

In 2018,the STAR collaboration collected data from^(96)_(44)Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr at√^(S)NN=200 Ge V to search for the presence of the chiral magnetic effect in collisions of nuclei.The isobar collision species alternated frequently between 9644 Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr.In order to conduct blind analyses of studies related to the chiral magnetic effect in these isobar data,STAR developed a three-step blind analysis procedure.Analysts are initially provided a"reference sample"of data,comprised of a mix of events from the two species,the order of which respects time-dependent changes in run conditions.After tuning analysis codes and performing time-dependent quality assurance on the reference sample,analysts are provided a species-blind sample suitable for calculating efficiencies and corrections for individual≈30-min data-taking runs.For this sample,species-specific information is disguised,but individual output files contain data from a single isobar species.Only run-by-run corrections and code alteration subsequent to these corrections are allowed at this stage.Following these modifications,the"frozen"code is passed over the fully un-blind data,completing the blind analysis.As a check of the feasibility of the blind analysis procedure,analysts completed a"mock data challenge,"analyzing data from Au+Au collisions at√^(S)NN=27 Ge V,collected in 2018.The Au+Au data were prepared in the same manner intended for the isobar blind data.The details of the blind analysis procedure and results from the mock data challenge are presented.

Optical properties of ZnO and Mn-doped ZnO nanocrystals by vapor phase transport processes

In this paper we investigated the optical properties of ZnO and Mn doped ZnO nanocrystals that were fabricated by a vapor phase transport growth process, using zinc acetate dihydrate with or without Mn in a constant O2/Ar mixture gas flowing through the furnace at 400600℃, respectively. The as grown ZnO nanocrystals are homogeneous with a mean size of 19 nm observed by scanning electron microscope（SEM）. The optical characteristics were analyzed by absorption spectra and photoluminescence（PL） spectra at room-temperature. For ZnO nanocrystals, a strong and predominant UV emission peaked at 377 nm was found in the PL spectra. For Mn doped ZnO nanocrystals, in addition to the strong UV emission, a strong blue emission peaked at 435 nm was observed as well. By doping Mn ions, the major UV emission shifts from 377 nm to 408 nm, showing that Mn ions were not only incorporated into ZnO Ncs, but also introduced an impurity level in the bandgap. Moreover, with the concentration of Mn increasing, the relative intensities of the two emissions change largely, and the photoluminescence mechanism of them is discussed.

Dynamically pre-compressed hydrocarbons studied by self-impedance mismatch

Using the SG-III prototype laser at China Academy of Engineering Physics,Mianyang,we irradiated polystyrene(CH)samples with a thermal radiation drive,reaching conditions on the principal Hugoniot up to P≈1 TPa(10 Mbar),and away from the Hugoniot up to P≈300 GPa(3 Mbar).The response of each sample was measured with a velocity interferometry diagnostic to determine the material and shock velocity,and hence the conditions reached,and the reflectivity of the sample,from which changes in the conductivity can be inferred.By applying the selfimpedance mismatch technique with the measured velocities,the pressure and density of thermodynamic points away from the principal Hugoniot were determined.Our results show an unexpectedly large reflectivity at the highest shock pressures,while the off-Hugoniot points agree with previous work suggesting that shock-compressed CH conductivity is primarily temperature-dependent.

A CRITERION FOR TWO KINDS OF PEIERLS TRANSITIONS

Two different kinds of Peierls transitions can exist depending on the anisotropic ratio y of intrachain and interchain coupling.γhas a critical valueγo;if_(γ>γo),the Peierls transition will exhibit a CDW accompanied by a metal-semiconductor transition(kind I);if_(γcγo),only CDW and superlattice occur at Peierls transition(kind II).Some experimental evidences are discussed.

Numerical performance assessment of double-shell targets for Z-pinch dynamic hohlraum

A Z-pinch dynamic hohlraum can create the high-temperature radiation field required by indirect-drive inertial confinement fusion.A dynamic hohlraum with peak radiation temperature over 300 eV can be obtained with a>50 MA Z-pinch driver according to the scaling law of dynamic hohlraum radiation temperature vs drive current.Based on a uniform 300 eV radiation temperature profile with a width of 10 ns,three double-shell capsules with radii of 2,2.5,and 3 mm are proposed,and the corresponding fusion yields from a one-dimensional calculation are 28.8,56.1,and 101.6 MJ.The implosion dynamics of the 2.5 mm-radius capsule is investigated in detail.At ignition,the areal density of the fuel is about 0.53 g/cm^(2),the fuel pressure is about 80 Gbar,and the central ion temperature is about 4.5 keV,according to the one-dimensional simulation.A two-dimensional simulation indicates that the double-shell capsule can implode nearly spherically when driven by the radiation field of a Z-pinch dynamic hohlraum.The sensitivities of the fusion performance to the radiation temperature profiles and to deviations in the capsule parameter are investigated through one-dimensional simulation,and it is found that the capsule fusion yields are rather stable in a quite large parameter space.A one-dimensional simulation of a capsule embedded in 50 mg/cm^(3)CH foam indicates that the capsule performance does not change greatly in the mimicked environment of a Z-pinch dynamic hohlraum.The double-shell capsules designed here are also applicable to laser indirect-drive inertial fusion,if a laser facility can produce a uniform 300 eV radiation field and sustain it for about 10 ns.

中国四川省2008年汶川M S8.0地震区域三维速度结构

我们利用2008年汶川M_S8.0地震的余震给出了中国四川龙门山断裂带区域纵波速度(VP)、剪切波速度(VS)和波速比(VP/VS)的三维(3D)模型。该速度和波速比模型是利用双差地震层析成像程序的一个新版本tomoDDPS(Zhang,2003)获得的,这个版本可以同时反演VP,VS,VP/VS,以及地震的位置。用于反演的数据来自位于一个东北到西南长400km、西北到东南宽200km的区域内的63个固定台站和临时台站,包括了73 013条P波到时、62 287条S波到时,以及61 823条S-P波走时差。速度模型显示了沿着断层和穿过断层的不均匀性。总体而言,速度模型和当地地质特征一致,老的岩石波速高,而年轻的岩石波速低。龙门山断裂带是VP,VS和VP/VS的一个明显分界。基本上在15km以上,断层西部呈现高VP,VS和低VP/VS,对应着松潘—甘孜褶皱系;而在断层东部则呈现低VP,VS和高VP/VS,对应着四川盆地。沿着断层方向,速度结构和多个破裂滑移模型比较吻合,两个高速体恰好对应着两个较大滑移距离的区域。这显示了速度结构控制着沿断层面的滑移分布。

Amplitude analysis of the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)

Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.

Determination of the number ofψ(3686)events taken at BESⅢ

The number ofψ(3686)events collected by the BESⅢdetector during the 2021 run period is determined to be(2259.3±11.1)×10~6 by counting inclusiveψ(3686)hadronic events.The uncertainty is systematic and the statistical uncertainty is negligible.Meanwhile,the numbers ofψ(3686)events collected during the 2009 and 2012run periods are updated to be(107.7±0.6)×10~6 and(345.4±2.6)×10~6,respectively.Both numbers are consistent with the previous measurements within one standard deviation.The total number ofψ(3686)events in the three data samples is(2712.4±14.3)×10~6.

Search for the doubly heavy baryon Ξ_(bc)^(+)→ decaying to J/ψΞ_(c)^(+)

A first search for the Ξ_(bc)^(+)J/ψΞ_(c)^(+) decay is performed by the LHCb experiment with a data sample of proton-proton collisions, corresponding to an integrated luminosity of 9 fb−1 recorded at centre-of-mass energies of 7, 8, and 13 TeV. Two peaking structures are seen with a local (global) significance of 4.3(2.8) and 4.1(2.4) standard deviations at masses of 6571 and 6694 MeV/c2, respectively. Upper limits are set on the Ξ+bc baryon production cross-section times the branching fraction relative to that of the B+c→J/ψD+s decay at centre-of-mass energies of 8 and 13 TeV, in the Ξ+bc and in the B+c rapidity and transverse-momentum ranges from 2.0 to 4.5 and 0 to 20GeV/c, respectively. Upper limits are presented as a function of the Ξ+bc mass and lifetime.

Search for the rare decays W^(+)→D_(s)^(+)γ and Z→D^(0)γ at LHCb

A search for the rare decays W^(+)→D_(s)^(+)γ and Z→D0γis performed using proton-proton collision data collected by the LHCb experiment at a centre-of-mass energy of 13TeV,corresponding to an integrated luminosity of 2.0fb−1.No significant signal is observed for either decay mode and upper limits on their branching fractions are set using W^(+)→D_(s)^(+)γ and Z→μ+μ−decays as normalization channels.The upper limits are 6.5×10^(−4) and 2.1×10^(−3) at 95% confidence level for the W^(+)→D_(s)^(+)γ and Z→D^(0)γ decay modes,respectively.This is the first reported search for the Z→D^(0)γ decay,while the upper limit on the W+→D+sγbranching fraction improves upon the previous best limit.

Review on Hydrogen Embrittlement of Press-hardened Steels for Automotive Applications

Press-hardened steel(PHS)with an ultimate tensile strength(UTS)of 1500 MPa has been widely used in automotive body-in-white in the last two decades,due to its ultra-high strength and excellent formability that is achieved by hot stamping process.However,the application of PHS with UTS exceeding 1500 MPa in automotive industry could be deferred due to the increased risk of hydrogen embrittlement.To reduce this kind of risk,recent research efforts have been focused on various ways to optimize the microstructure of PHS.The present review intends to summarize these efforts,to highlight present solutions to address hydrogen embrittlement,and to shed light on directions for future improvement.The influence of microstructure on the hydrogen embrittlement of PHS has been discussed in terms of both the steel substrate and the surface condition.The substrate part covers the influence of martensite,carbides,inclusions,and retained austenite,while the surface part covers decarburization and oxidation,pre-coating,and trimming.

Observation of e^(+)e^(-)→pppñπ-+c.c.

Using data taken at 29 center-of-mass energies between 4.16 and 4.70 GeV with the BESⅢdetector at the Beijing Electron Positron Collider corresponding to a total integrated luminosity of approximately 18.8 fb^(-1),the process e^(+)e^(-)→pppñπ+c.c.is observed for the first time with a statistical significance of 11.5σ.The average Born cross sections in the energy ranges of(4.160,4.380)GeV,(4.400,4.600)GeV and(4.610,4.700)GeV are measured to be(21.5±5.7±1.2)fb,(46.3±10.6±2.5)fb and(59.0±9.4±3.2)fb,respectively,where the first uncertainties are statistical and the second are systematic.The line shapes of the pñ and ppπ^(-)invariant mass spectra are consistent with phase space distributions,indicating that no hexaquark or di-baryon state is observed.

Search for hidden-charm tetraquark with strangeness in e^(+)e^(−)→K^(+)D_(s)^(∗−) D^(∗0 )+ c.c.

We report a search for a heavier partner of the recently observed Z_(cs)(3985)^(-) state,denoted as Z_(cs)^('-),in the process e^(+)e^(−)→K^(+)D_(s)^(∗−) D^(∗0 )+ c.c.,based on e^(*)e^(-)collision data collected at the center-of-mass energies of √s=4.661,4.682 and 4.699 GeV with the BESIII detector.The Z_(cs)^('-) is of interest as it is expected to be a candidate for a hidden-charm and open-strange tetraquark.A partial-reconstruction technique is used to isolate K^(+)recoil-mass spectra,which are probed for a potential contribution from Z_(cs)^('-)→D_(s)^(∗−) D^(∗0 )+ c.c.We find an excess of Z_(cs)^('-)→D_(s)^(*-)-D^(*0)(c.c.)candidates with a significance of 2.1o,after considering systematic uncertainties,at a mass of(4123.5±0.7_(sat)±4.7_(syst.))MeV/c^(2).As the data set is limited in size,the upper limits are evaluated at the 90%confidence level on the product of the Born cross sections(σ^(Borm))and the branching fraction(B)of Z_(cs)^('-)→D_(s)^(*-)-D^(*0),under different assumptions of the Z_(cs)^('-) mass from 4.120 to 4.140 MeV and of the width from 10 to 50 MeV at the three center-of-mass energies.The upper limits of σ^(Born).B are found to be at the level of O(1)pb at each energy.Larger data samples are needed to confirm the Z_(cs)^('-) state and clarify its nature in the coming years.

Search for the weak decayψ(3686)→■+c.c.

Using(448.1±2.9)×10^(6)ψ(3686)for the weak baryonic decayψ(3686)→Λc+∑-+c.c..The analysis procedure is optimized using a blinded method.No significant signal is observed,and the upper limit on the branching fraction(B)ofψ(3686)→Λc+∑-+c.c.is set as 1.4×10^(-5)at the 90%confidence level.

Observations of the Cabibbo-Suppressed decays Λ_(c)^(+)→nπ+π^(0),nπ^(+)π^(-)π^(+) and the Cabibbo-Favored decay Λ_(c)^(+)→nK^(-)π^(+)π^(+)

Using electron-positron annihilation data samples corresponding to an integrated luminosity of 4.5 fb-1,collected by the BESⅢdetector in the energy region between 4599.53 MeV and 4698.82 MeV,we report the first observations of the Cabibbo-suppressed decaysΛ_(c)^(+)→nπ^(+)π^(0),Λ_(c)^(+)→nπ^(+)π^(-)π^(+),and the Cabibbo-favored decayΛ_(c)^(+)→nK^(-)π^(+)π^(+)with statistical significances of 7.9σ,7.8σ,and>10σ,respectively.The branching fractions of these decays are measured to be B(Λ_(c)^(+)→nπ^(+)π^(0))=(0.64±0.09±0.02)%,B(Λ_(c)^(+)→nπ^(+)π^(-)π^(+))=(0.45±0.07±0.03)%,and B(Λ_(c)^(+)→nK^(-)π^(+)π^(+))=(1.90±0.08±0.09)%,where the first uncertainties are statistical and the second are systematic.We find that the branching fraction of the decayΛ_(c)^(+)→nπ^(+)π^(0)is about one order of magnitude higher than that ofΛ_(c)^(+)→nπ^(+).

Measurements of the center-of-mass energies of e^(+)e^(-)collisions at BESIII

During the 2016-17 and 2018-19 running periods,the BESIII experiment collected 7.5 fb of e^(+)e^(-)collision data at center-of-mass energies ranging from 4.13 to 4.44 GeV.These data samples are primarily used for the study of excited charmonium and charmoniumlike states.By analyzing the di-muon process e^(+)e^(-)→(γISR=FSR)μ^(+)μ^(-),we measure the center-of-mass energies of the data samples with a precision of 0.6 MeV.Through a run-by-run study,we find that the center-of-mass energies were stable throughout most of the data-collection period.

Future Physics Programme of BESⅢ

There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.

Study of BESIII trigger efficiencies with the 2018 J/ψ data

Using a dedicated data sample taken in 2018 on the J/ψpeak,we perform a detailed study of the trigger efficiencies of the BESIII detector.The efficiencies are determined from three representative physics processes,namely Bhabha scattering,dimuon production and generic hadronic events with charged particles.The combined efficiency of all active triggers approaches 100%in most cases,with uncertainties small enough not to affect most physics analyses.

Simultaneous enhancement of mechanical and shape memory properties by heat-treatment homogenization of Ti_(2)Ni precipitates in TiNi shape memory alloy fabricated by selective laser melting

The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we examined the simultaneous enhancement of mechanical and shape memory properties using heat-treatment homogenization of Ti_(2)Ni precipitates in a Ti_(50.6)Ni_(49.4)SMA fabricated using SLM. Specifically, because of the complete solution treatment, nanoscale spherical Ti_(2)Ni precipitates were homogeneously dispersed throughout the grain interior. Interestingly, the resultant SMA exhibited an ultrahigh tensile strength of 880 ± 13 MPa, a large elongation of 22.4 ± 0.4%, and an excellent shape memory effect, with a recovery rate of > 98% and ultrahigh recoverable strain of 5.32% after ten loading–unloading cycles. These simultaneously enhanced properties are considerably superior than those of most previously reported Ti Ni SMAs fabricated using additive manufacturing. Fundamentally, the enhancement in tensile strength is ascribed to precipitation strengthening and work hardening, and the large plasticity is mainly attributed to the homogeneous nanoscale globular Ti_(2)Ni precipitates, which effectively impeded the rapid propagation of microcracks. Furthermore, the enhanced shape memory properties are derived from the suppression of dislocation movement and formation of retained stabilized martensite by the presence of high-density dislocations, nanoscale Ti_(2)Ni precipitates, and abundant interfaces. The obtained results provide insight into the enhancement of the two types of properties in Ti Ni SMAs and will accelerate the wider application of SMAs.