Precursor engineering enables high-performance all-inorganic CsPbIBr_(2) perovskite solar cells with a record efficiency approaching 13%

All-inorganic CsPbIBr_(2) perovskite has attracted widespread attention in photovoltaic and other optoelectronic devices because of its superior thermal stability.However,the deposition of high-quality solutionprocessed CsPbIBr_(2) perovskite films with large thicknesses remains challenging.Here,we develop a triple-component precursor(TCP) by employing lead bromide,lead iodide,and cesium bromide,to replace the most commonly used double-component precursor(DCP) consisting of lead bromide and cesium iodide.Remarkably,the TCP system significantly increases the solution concentration to 1.3 M,leading to a larger film thickness(~390 nm) and enhanced light absorption.The resultant CsPbIBr_(2) films were evaluated in planar n-i-p structured solar cells,which exhibit a considerably higher optimal photocurrent density of 11.50 mA cm^(-2) in comparison to that of DCP-based devices(10.69 mA cm^(-2)).By adopting an organic surface passivator,the maximum device efficiency using TCP is further boosted to a record efficiency of 12.8% for CsPbIBr_(2) perovskite solar cells.

Clinical Observation on the Treatment of Pre and Postmenopausal Syndromes by Modified Wumei Decoction

Objective:To compare the efficacy of Wumei Decoction in pre and postmenopausal patients and its effect on follicle-stimulating hormone(FSH)and estradiol(E2).Methods:Sixty-four patients who attended the Department of Traditional Chinese Medicine I in Cangzhou City Central Hospital from January 2020 to January 2022 were selected and randomly divided into treatment group and control group,32 cases in each group.The treatment group took modified Wumei Decoction orally,1 dose of water boiled 2 times a day,divided into 2 warm doses;the control group took Livial orally,2.5 mg/times,1 time/day,and the observation cycles were all for 3 months.Kupperman score,FSH,E2,clinical symptoms and clinical efficacy were compared between the two groups before and after treatment.Results:The Kupperman score of the two groups decreased after treatment,and the difference was statistically significant;the total effective rate of the treatment group was higher than that of the control group,and the difference was statistically significant;there was no statistical significance in the comparison of FSH before and after the treatment of the two groups,but the FSH values of the two groups were significantly lower than those before,and the difference was statistically significant;there was no statistically significant difference in the comparison of E2 of the two groups before treatment,and the E2 values of the two groups were higher than those of the control group after the treatment.After the treatment,E2 of the two groups of patients was significantly higher than before,and the difference was statistically significant.After treatment,E2 of the treatment group was higher than that of the control group,and the comparison between the groups was statistically significant.Conclusion:There was no significant difference between modified Wumei Decoction and Livial in lowering follicle-stimulating hormone levels;modified Wumei Decoction was superior in raising oestradiol;and modified Wumei Decoction was relatively effective in improving clinical symptoms.

Lu-H-N Phase Diagram from First-Principles Calculations

Employing a comprehensive structure search and high-throughput first-principles calculation method on 1561 compounds,the present study reveals the phase diagram of Lu-H-N.In detail,the formation energy landscape of Lu-H-N is derived and utilized to assess the thermodynamic stability of each compound that is created via element substitution.The result indicates that there is no stable ternary structure in the Lu-H-N chemical system,however,metastable ternary structures,such as Lu_(20)H_(2)N_(17)(C2/m)and Lu_(2)H_(2)N(P3m1),are observed to have small E_(hull)(<100 meV/atom).It is also found that the energy convex hull of the Lu-H-N system shifts its shape when applying hydrostatic pressure up to 10 GPa,and the external pressure stabilizes a couple of binary phases such as LuN_9 and Lu_(10)H_(21).Additionally,interstitial voids in LuH_(2)are observed,which may explain the formation of Lu_(10)H_(21)and LuH_(3-δ)N_ε.To provide a basis for comparison,x-ray diffraction patterns and electronic structures of some compounds are also presented.

Energy Landscape and Phase Competition of CsV_(3)Sb_(5),CsV_(6)Sb_(6)and TbMn_(6)Sn_(6)-Type Kagome Materials

Finding viable Kagome lattices is vital for materializing novel phenomena in quantum materials.In this study,we performed element substitutions on CsV_(3)Sb_(5)with space group P 6/mmm,TbMn_(6)Sn_(6)with space group P 6/mmm,and CsV_(6)Sb_(6)with space group R3m,as the parent compounds.Totally 4158 materials were obtained through element substitutions,and these materials were then calculated via density functional theory in high-throughput mode.Afterwards,48 materials were identified with high thermodynamic stability(E_(hull)<5 meV/atom).Furthermore,we compared the thermodynamic stability of three different phases with the same elemental composition and predicted some competing phases that may arise during material synthesis.Finally,by calculating the electronic structures of these materials,we attempted to identify patterns in the electronic structure variations as the elements change.This study provides guidance for discovering promising AM_(3)X_(5)/AM_(6)X_(6)Kagome materials from a vast phase space.

Significantly Enhanced Electromagnetic Interference Shielding Performances of Epoxy Nanocomposites with Long-Range Aligned Lamellar Structures

High-efficiency electromagnetic interference(EMI)shielding materials are of great importance for electronic equipment reliability,information security and human health.In this work,bidirectional aligned Ti_(3)C_(2)T_(x)@Fe_(3)O_(4)/CNF aerogels(BTFCA)were firstly assembled by bidirectional freezing and freeze-drying technique,and the BTFCA/epoxy nanocomposites with long-range aligned lamellar structures were then prepared by vacuum-assisted impregnation of epoxy resins.Benefitting from the successful construction of bidirectional aligned three-dimensional conductive networks and electromagnetic synergistic effect,when the mass fraction of Ti_(3)C_(2)T_(x) and Fe_(3)O_(4) are 2.96 and 1.48 wt%,BTFCA/epoxy nanocomposites show outstanding EMI shield-ing effectiveness of 79 dB,about 10 times of that of blended Ti_(3)C_(2)T_(x)@Fe_(3)O_(4)/epoxy(8 dB)nanocomposites with the same loadings of Ti_(3)C_(2)T_(x) and Fe_(3)O_(4).Meantime,the corresponding BTFCA/epoxy nanocomposites also present excellent thermal stability(T_(heat-resistance index) of 198.7℃)and mechanical properties(storage modulus of 9902.1 MPa,Young’s modulus of 4.51 GPa and hardness of 0.34 GPa).Our fabricated BTFCA/epoxy nanocomposites would greatly expand the applications of MXene and epoxy resins in the fields of information security,aerospace and weapon manufacturing,etc.

Efficient and stable planar all-inorganic perovskite solar cells based on high-quality CsPbBr3 films with controllable morphology

All-inorganic cesium lead bromide(CsPbBr3)perovskite is attracting growing interest as functional materials in photovoltaics and other optoelectronic devices due to its superb stability.However,the fabrication of high-quality CsPbBr3 films still remains a big challenge by solution-process because of the low solubility of the cesium precursor in common solvents.Herein,we report a facile solution-processed approach to prepare high-quality CsPbBr3 perovskite films via a two-step spin-coating method,in which the Cs Br methanol/H2 O mixed solvent solution is spin-coated onto the lead bromide films,followed by an isopropanol-assisted post-treatment to regulate the crystallization process and to control the film morphology.In this fashion,dense and uniform CsPbBr3 films are obtained consisting of large crystalline domains with sizes up to microns and low defect density.The effectiveness of the resulting CsPbBr3 films is further examined in perovskite solar cells(PSCs)with a simplified planar architecture of fluorine–doped tin oxide/compact Ti O2/CsPbBr3/carbon,which deliver a maximum power conversion efficiency of 8.11%together with excellent thermal and humidity stability.The present work offers a simple and effective strategy in fabrication of high-quality CsPbBr3 films for efficient and stable PSCs as well as other optoelectronic devices.

Progress in hole-transporting materials for perovskite solar cells

In recent years the photovoltaic community has witnessed the unprecedented development of perovskite solar cells（PSCs） as they have taken the lead in emergent photovoltaic technologies. The power conversion efficiency of this new class of solar cells has been increased to a point where they are beginning to compete with more established technologies. Although PSCs have evolved a variety of structures, the use of hole-transporting materials（HTMs） remains indispensable. Here, an overview of the various types of available HTMs is presented. This includes organic and inorganic HTMs and is presented alongside recent progress in associated aspects of PSCs, including device architectures and fabrication techniques to produce high-quality perovskite films. The structure, electrochemistry, and physical properties of a variety of HTMs are discussed, highlighting considerations for those designing new HTMs. Finally, an outlook is presented to provide more concrete direction for the development and optimization of HTMs for highefficiency PSCs.

Surface passivation and hole extraction:Bifunctional interfacial engineering toward high-performance all-inorganic CsPbIBr2 perovskite solar cells with efficiency exceeding 12%

All-inorganic CsPbIBr2perovskite solar cells(PSCs)have attracted considerable research attention in recent years due to their excellent thermal stability.However,their power conversion efficiencies(PCEs)are relatively low and still far below the theoretical limit.Here,we report the use of an organic dye molecule(namely VG1-C8)as a bifunctional interlayer between perovskite and the hole-transport layer in CsPbIBr2PSCs.Combined experimental and theoretical calculation results disclose that the multiple Lewis base sites in VG1-C8 can effectively passivate the trap states on the perovskite films.Meanwhile,theπ-conjugated dye molecule significantly accelerates the hole extraction from the perovskite absorber as evidenced by the photoluminescence analysis.Consequently,the VG1-C8 treatment simultaneously boosts the photovoltage and photocurrent density values from 1.26 V and 10.80 mA cm^(-2) to 1.31 V and 12.44 m A cm^(-2),respectively.This leads to a significant enhancement of PCE from 9.20%to12.10%under one sun irradiation(AM 1.5G).To our knowledge,this is the record efficiency reported so far for CsPbIBr_(2) PSCs.Thus,the present work demonstrates an effective interfacial passivation strategy for the development of highly efficient PSCs.

Screening Promising CsV_(3)Sb_(5)-Like Kagome Materials from Systematic First-Principles Evaluation

The Cs V_(3)Sb_(5) kagome lattice holds the promise for manifesting electron correlation,topology and superconductivity.However,by far only three Cs V_(3)Sb_(5)-like kagome materials have been experimentally spotted.We enlarge this family of materials to 1386 compounds via element species substitution,and the further screening process suggests that 28 promising candidates have superior thermodynamic stability,hence they are highly likely to be synthesizable.Moreover,these compounds possess several unique electronic structures,and can be categorized into five non-magnetic and three magnetic groups accordingly.It is our hope that this work can greatly expand the viable phase space of the Cs V_(3)Sb_(5)-like materials for investigating or tuning the novel quantum phenomena in kagome lattice.

Copper naphthalocyanine-based hole-transport material for highperformance and thermally stable perovskite solar cells

Metal phthalocyanines(MPcs) have gained considerable research attention as hole-transport materials(HTMs) in perovskite solar cells(PSCs) because of their superb stability. However, the photovoltaic performance of MPc-based HTMs in PSCs is still lagging behind their small molecule and polymeric counterparts, largely due to their relatively low hole mobility. Here, we report for the first time the application of a copper naphthalocyanine derivative(namely t Bu-Cu Nc) as a hole-transport material(HTM)in perovskite solar cells(PSCs), and systematically study its optoelectronic and photovoltaic property compared with its Cu Pc analog(t Bu-Cu Pc). Combined experiments disclose that the extension of π-conjugation from Pc to Nc core leads to not only an enhanced hole-carrier mobility associated with a stronger intermolecular interaction, but also an elevated glass transition temperature(T_g) of 252 °C. The resultant PSCs employing t Bu-Cu Nc deliver an excellent power conversion efficiency of 24.03%, which is the record efficiency reported for metal complex-based HTMs in PSCs. More importantly, the encapsulated t Bu-Cu Nc-based devices also show dramatically improved thermal stability than the devices using the well-known SpiroOMe TAD, with a T_(80)lifetime for more than 1,000 h under damp-heat stress. This study unfolds a new avenue for developing efficient and stable HTMs in PSCs.

An OsPRMT5-OsAGO2/miR1875-OsHXK1 module regulates rice immunity to blast disease

Rice ARGONAUTE2(OsAGO2)is a core component of the rice RNA-induced silencing complex(RISC),which is repressed by Magnaporthe oryzae(M.oryzae)infection.Whether and how OsAGO2-mediated gene silencing plays a role in rice blast resistance and which sRNAs participate in this process are unknown.Our results indicate that OsAGO2 is a key immune player that manipulates rice defense responses against blast disease.OsAGO2 associates with the 24-nt miR1875 and binds to the promoter region of HEXOKINASE1(OsHXK1),which causes DNA methylation and leads to gene silencing.Our multiple genetic evidence showed that,without M.oryzae infection,OsAGO2/miR1875 RISC promoted OsHXK1 promoter DNA methylation and OsHXK1 silencing;after M.oryzae infection,the reduced OsAGO2/miR1875 led to a relatively activated OsHXK1 expression.OsHXK1 acts as a positive regulator of blast disease resistance that OsHXK1-OE rice exhibited enhanced resistance,whereas Cas9-Oshxk1 rice showed reduced resistance against M.oryzae infection.OsHXK1 may function through its sugar sensor activity as glucose induced defense-related gene expression and reactive oxygen species(ROS)accumulation in Nipponbare and OsHXK1-OE but not in Cas9-Oshxk1 rice.OsAGO2 itself is delicately regulated by OsPRMT5,which senses M.oryzae infection and attenuates OsAGO2-mediated gene silencing through OsAGO2 arginine methylation.Our study reveals an OsPRMT5-OsAGO2/miR1875-OsHXK1 regulatory module that fine tunes the rice defense response to blast disease.

PIFs interact with SWI2/SNF2-related 1 complex subunit 6 to regulate H2A.Z deposition and photomorphogenesis in Arabidopsis

Light is an essential environmental signal perceived by a broad range of photoreceptors in plants. Among them, the red/far-red light receptor phytochromes function to promote photomorphogenesis, which is critical to the survival of seedlings after seeds germination. The basic-helix-loop-helix transcription factors phytochrome-interacting factors (PIFs) are the pivotal direct downstream components of phytochromes. H2A.Z is a highly conserved histone variant regulating gene transcription, and its incorporation into nucleosomes is catalyzed by SWI2/SNF2-related 1 complex, in which SWI2/SNF2-related 1 complex subunit 6 (SWC6) and actin-related protein 6 (ARP6) serve as core subunits. Here, we show that PIFs physically interact with SWC6 in vitro and in vivo, leading to the disassociation of HY5 from SWC6. SWC6 and ARP6 regulate hypocotyl elongation partly through PIFs in red light. PIFs and SWC6 coregulate the expression of auxin-responsive genes such as IAA6, IAA19, IAA20, and IAA29 and repress H2A.Z deposition at IAA6 and IAA19 in red light. Based on previous studies and our findings, we propose that PIFs inhibit photomorphogenesis, at least in part, through repression of H2A.Z deposition at auxin-responsive genes mediated by the interactions of PIFs with SWC6 and promotion of their expression in red light.

A SLC31A1-MEK-DNMT1-miR-124 feedback loop contributes to pancreatic cancer progression

Although the role of copper (Cu) in promoting KRas- or BRaf-mutation driven cancers via activating MEK1/2 kinases is known, the mechanism by which the copper transporter SLC31A1 (CTR1) is upregulated in pancreatic cancer (PDAC, KRas mutation) is not defined. In this study, we provide evidence that MEK signal maintains a high level of SLC31A1 through silencing the expression of miR-124-3P (miR-124) via a novel MEK-DNMT1-miR-124 feedback loop in PDAC cells. Further, we reveal that miR-124 directly targets suppression of SLC31A1, and miR-124 introduction together with tetrathiomolybdate (TM) treatment hampered pancreatic cancer growth in vitro and in vivo. Our results demonstrate that a SLC31A1-MEK-DNMT1-miR-124 feedback loop is an important pathway to maintain copper absorption and promote pancreatic cancer progression, and we hope to provide a Cu-chelation as an adjuvant treatment strategy, to block the progression in Kras mutant PDAC patients.

“话说”西藏:对叙述主体的传播观想

在历史的景深中是什么样的人用什么样的话语、方式描述着西藏,他们的描述又在世人的心目中形成了怎样的西藏形象,又实现了什么样的传播目的?结合文献,文章对此类问题进行了梳理总结,阐释了西方社会构建西藏形象的历史出发点与话语偏见,并对西方社会“为己所用”的话语操纵方式进行解析,在传播技术迅速迭代的背景下,基于西藏现实社会的发展提出:传播西藏的主体、内容、方式均已发生变化,这些变化从浅层上来说是技术赋能;而深层来说,它是社会变迁和人们观念变化的反映。西藏形象的树立与传播是中国国家形象树立与传播的重要内容,这样的梳理,一方面益于我们在西藏形象传播实践上理清思路,寻找突破点;另一方面,我们要多维而立体地构建有感染力、有可信度、有共情力的话语体系,以打破西方话语霸权。

Effect of different gas releasing methods on anaerobic fermentative hydrogen production in batch cultures

Decreasing hydrogen partial pressure can not only increase the activity of the hydrogen enzyme but also decrease the products inhibition, so it is an appropriate method to enhance the fermentative hydrogen production from anaerobic mixed culture. The effect ofbiogas release method on anaerobic fermentative hydrogen production in batch culture system was compared, i.e., Owen method with intermediately release, continuous releasing method, and continuous releasing ＋ CO2 absorbing. The experi- mental results showed that, at 35℃, initial pH 7.0 and glucose concentration of 10 g.L-1, the hydrogen produc- tion was only 28 mL when releasing gas by Owen method, while it increased two times when releasing the biogas continuously. The cumulative hydrogen production could reach 155 mL when carbon dioxide in the gas stream was continuously absorbed by 1 mol.L-1 NaOH. The results showed that acetate was dominated, accounting for 43% in the dissolved fermentation products in Owen method, whereas the butyrate predominated and reached 47%-53% of the total liquid end products when releasing gas continuously. It is concluded that the homoacetogenesis could be suppressed when absorbing CO2 in the gas phase in fermentative hydrogen production system.

Jupiter system exploration trajectory design: Summary of the winning solution at CTOC10

This paper presents the methods and results submitted by the winning team from Harbin Institute of Technology of the 10th China Trajectory Optimization Competition(CTOC10).The problem posed by CTOC10 requires exploring the Jupiter system using a combined spacecraft.The exploration mission consists of the detection of Jupiter’s magnetic field and an exploration of the Galilean moons.The mission is completed through three steps:problem analysis,orbital design process,and data processing.The orbital design process is mainly divided into four parts,namely,repeating groundtrack orbit design,gravity-assisted orbit design,initial orbit parameter selection,and local optimization adjustment.The designed orbit is then evaluated using a heuristic optimization algorithm applied during the data processing.Finally,six full-coverage observations of Jupiter’s magnetic field are realized under the constraints of fuel and time.The final index of the submitted result is 357.8067.

Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material

The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine(CuPc-DMP) via only two simple steps,has been incorporated as a hole-transporting material(HTM) in mesoscopic perovskite solar cells(PSCs).The optimized devices based on such a HTM afford a very competitive power conversion efficiency(PCE) of up to 17.1%measured at 100 mW cm^(-2) AM 1.5G irradiation,which is on par with that of the well-known 2,2',7,7'-tetrakis(N'N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene(spiro-OMeTAD)(16.7%) under equivalent conditions.This is,to the best of our knowledge,the highest value reported so far for metal organic complex-based HTMs in PSCs.The advantages of this HTM observed,such as facile synthetic procedure,superior hole transport characteristic,high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs.The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.

Improved performance and air stability of perovskite solar cells based on low-cost organic hole-transporting material X60 by incorporating its dicationic salt

The development of an efficient, stable, and low-cost hole-transporting material (HTM) is of great significance for perovskite solar cells (PSCs) from future commercialization point of view. Herein, we specifically synthesize a dicationic salt of X60 termed X60(TFSI)2, and adopt it as an effective and stable "doping" agent to replace the previously used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) for the low-cost organic HTM X60 in PSCs. The incorporation of this dicationic salt significantly increases the hole conductivity of X60 by two orders of magnitude from 10-6 to 10-4 S cm-1. The dramatic enhancement of the conductivity leads to an impressive power conversion efficiency (PCE) of 19.0% measured at 1 sun illumination (100 mW cm-2, AM 1.5 G), which is comparable to that of the device doped with LiTFSI (19.3%) under an identical condition. More strikingly, by replacing LiTFSI, the PSC devices incorporating X60(TFSI)2 also show an excellent long-term durability under ambient atmosphere for 30 days, mainly due to the hydrophobic nature of the X60(TFSI)2 doped HTM layer,which can effectively prevent the moisture destroying the perovskite layer. The present work paves the way for the development of highly efficient, stable, and low-cost HTM for potential commercialization of PSCs.

Tumor Necrosis Factor a Reduces SNAP29 Dependent Autolysosome Formation to Increase Prion Protein Level and Promote Tumor Cell Migration

Tumor Necrosis Factor α(TNFα) is best known as a mediator of inflammation and immunity, and also plays important roles in tumor biology. However, the role of TNFα in tumor biology is complex and not completely understood. In a human melanoma cell line, M2, and a lung carcinoma cell line, A549, TNFα up-regulates prion protein(PrP) level, and promotes tumor cell migration in a PrP dependent manner. Silencing PRNP abrogates TNFα induced tumor cell migration;this phenotype is reversed when PRNP is re-introduced. Treatment with TNFα activates nuclear factor kappa B(NF-κB)signaling, which then mitigates autophagy by reducing the expression of Forkhead Box P3(FOXP3). Down regulation of FOXP3 reduces the transcription of synaptosome associated protein 29(SNAP29), which is essential in the fusion of autophagosome and lysosome creating autolysosome. FOXP3 being a bona fide transcription factor for SNAP29 is confirmed in a promoter binding assay. Accordingly, silencing SNAP29 in these cell lines also up-regulates PrP, and promotes tumor cell migration without TNFα treatment. But, when SNAP29 or FOXP3 is silenced in these cells, they are no longer respond to TNFα. Thus, a reduction in autophagy is the underlying mechanism by which expression of PrP is up-regulated,and tumor cell migration is enhanced upon TNFα treatment. Disrupting the TNFα-NF-κB-FOXP3-SNAP29 signaling axis may provide a therapeutic approach to mitigate tumor cell migration.

Dynamical evolution of anisotropic response of type-Ⅱ Weyl semimetal TalrTe_(4) under ultrafast photoexcitation

Layered type-ⅡWeyl semimetals,such as WTe_(2)/MoTe_(2),and TalrTe_(4)have been dem on strated as a supreme photodetection material with topologically enhanced responsivity and specific sensitivity to the orbital angular momentum of light.Toward future device applications with high performance and ultrafast response,it is necessary to understand the dynamical processes of hot carriers and transient electronic properties of these materials under photoexcitation.In this work,mid-infrared ultrafast spectroscopy is performed to study the dynamical evolution of the anisotropic response of TalrTe_(4).The dynamical relaxation of photoexcited carriers exhibits three exponential decay components relating to optical/acoustic phonon cooling and subsequent heat transfer to the substrate.The ultrafast transient dynamics imply that TalrTe_(4)is an ideal material candidate for ultrafast optoelectronic applications,especially in the Iong-wavelength region.The angle-resolved measurement of transient reflection reveals that the reflectivity becomes less anisotropic in the quasi-equilibrium state,indicating a reduction in the anisotropy of dynamical conductivity in presence of photoexcited hot carriers.The results are indispensable in material engineering for polarization-sensitive optoelectronics and high field electronics.