A method for establishing a bearing residual life prediction model for process enhancement equipment based on rotor imbalance response analysis

A rotating packed bed is a typical chemical process enhancement equipment that can strengthen micromixing and mass transfer.During the operation of the rotating packed bed,the nonreactants and products irregularly adhere to the wire mesh packing in the rotor,thus resulting in an imbalance in the vibration of the rotor,which may cause serious damage to the bearing and material leakage.This study proposes a model prediction for estimating the bearing residual life of a rotating packed bed based on rotor imbalance response analysis.This method is used to determine the influence of the mass on the imbalance in the vibration of the rotor on bearing damage.The major influence on rotor vibration was found to be exerted by the imbalanced mass and its distribution radius,as revealed by the results of orthogonal experiments.Through implementing finite element analysis,the imbalance response curve for the rotating packed bed rotor was obtained,and a correlation among rotor imbalance mass,distribution radius of imbalance mass,and bearing residue life was established via data fitting.The predicted value of the bearing life can be used as the reference basis for an early safety warning of a rotating packed bed to effectively avoid accidents.

QoS-Constrained,Reliable and Energy-Efficient Task Deployment in Cloud Computing

Reliability,QoS and energy consumption are three important concerns of cloud service providers.Most of the current research on reliable task deployment in cloud computing focuses on only one or two of the three concerns.However,these three factors have intrinsic trade-off relationships.The existing studies show that load concentration can reduce the number of servers and hence save energy.In this paper,we deal with the problem of reliable task deployment in data centers,with the goal of minimizing the number of servers used in cloud data centers under the constraint that the job execution deadline can be met upon single server failure.We propose a QoS-Constrained,Reliable and Energy-efficient task replica deployment(QSRE)algorithm for the problem by combining task replication and re-execution.For each task in a job that cannot finish executing by re-execution within deadline,we initiate two replicas for the task:main task and task replica.Each main task runs on an individual server.The associated task replica is deployed on a backup server and completes part of the whole task load before the main task failure.Different from the main tasks,multiple task replicas can be allocated to the same backup server to reduce the energy consumption of cloud data centers by minimizing the number of servers required for running the task replicas.Specifically,QSRE assigns the task replicas with the longest and the shortest execution time to the backup servers in turn,such that the task replicas can meet the QoS-specified job execution deadline under the main task failure.We conduct experiments through simulations.The experimental results show that QSRE can effectively reduce the number of servers used,while ensuring the reliability and QoS of job execution.

Performance analysis and comparison of PoW,PoS and DAG based blockchains

In the blockchain,the consensus mechanism plays a key role in maintaining the security and legitimation of contents recorded in the blocks.Various blockchain consensus mechanisms have been proposed.However,there is no technical analysis and comparison as a guideline to determine which type of consensus mechanism should be adopted in a specific scenario/application.To this end,this work investigates three mainstream consensus mechanisms in the blockchain,namely,Proof of Work(PoW),Proof of Stake(PoS),and Direct Acyclic Graph(DAG),and identifies their performances in terms of the average time to generate a new block,the confirmation delay,the Transaction Per Second(TPS)and the confirmation failure probability.The results show that the consensus process is affected by both network resource(computation power/coin age,buffer size)and network load conditions.In addition,it shows that PoW and PoS are more sensitive to the change of network resource while DAG is more sensitive to network load conditions.

Laser Oscillating of Nickel Alloyed Welds on Press‑Hardened Steel

Laser oscillating welding was employed to fabricate Al-Si coated press-hardened steel(PHS)to improve the element homogeneity in the fusion zone.Laser oscillating welding was employed with various oscillation amplitudes(0 mm,0.5 mm and 1.3 mm)in this present.Ni foil of 0.06 mm thickness was used as an interlayer between two tailored PHS welded.The weld morphology,elemental profile,microstructure and tensile strength of welded joints were studied.The results showed that full penetration weld without any weld defects were achieved for any oscillation amplitudes,and weld width increased with increasing oscillation amplitudes.With the oscillation amplitudes increased,Ni and Al had an uneven elemental profile due to strong stirring force,but the Ni and Al content in the weld was decreased and Ni had a sharp descent compared to Al element.Only fewδ-ferrite was presented in fusion line with the oscillation amplitudes increased to 1.3 mm.The oscillation amplitudes did not have an effect on the tensile properties,which was similar to that of base metal.But if keeping increasing the oscillation amplitudes or reducing the thickness of Ni interlayer,it has a potential risk to form more and moreδferrite such that deteriorate the mechnical properties of welded joints.