Advances and challenges in direct additive manufacturing of dense ceramic oxides

Ceramic oxides,renowned for their exceptional combination of mechanical,thermal,and chemical properties,are indispensable in numerous crucial applications across diverse engineering fields.However,conventional manufacturing methods frequently grapple with limitations,such as challenges in shaping intricate geometries,extended processing durations,elevated porosity,and substantial shrinkage deformations.Direct additive manufacturing(dAM)technology stands out as a state-of-the-art solution for ceramic oxides production.It facilitates the one-step fabrication of high-performance,intricately designed components characterized by dense structures.Importantly,dAM eliminates the necessity for post-heat treatments,streamlining the manufacturing process and enhancing overall efficiency.This study undertakes a comprehensive review of recent developments in dAM for ceramic oxides,with a specific emphasis on the laser powder bed fusion and laser directed energy deposition techniques.A thorough investigation is conducted into the shaping quality,microstructure,and properties of diverse ceramic oxides produced through dAM.Critical examination is given to key aspects including feedstock preparation,laser-material coupling,formation and control of defects,in-situ monitoring and simulation.This paper concludes by outlining future trends and potential breakthrough directions,taking into account current gaps in this rapidly evolving field.

Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy

Understanding the densification behaviours and formation mechanisms of defects are essential to fabricate high quality and high strength aluminium components using selective laser melting(SLM) technology. In this work, the effects of laser power and scanning speed on the densification, defects evolution and their formation mechanisms in a SLMed 2024 aluminium(Al) alloy were investigated in consideration of the corresponding laser energy input, melting mode transition and microstructural evolution. The results showed that optimizing the processing parameters effectively reduced the porosity level below1% by avoiding the lack of fusion and keyhole melting mode, and minimizing the gas pores. However,optimization of the processing parameters could not eliminate the columnar structure associated with the SLMed 2024 Al alloy, which contributed to the hot-tearing cracks in the SLMed parts. It was found that the dependence of porosity formation on SLM processing parameters was contrary to the crack density. Hence, to further improve the SLM-processability of the 2024 Al alloy it is necessary to develop SLM methods in order avoid the hot-cracking within the optimized processing parameter window associated with the minimum porosity formation.