Manipulating Horizontal Zn Deposition with Graphene Interpenetrated Zn Hybrid Foils for Dendrite-Free Aqueous Zinc Ion Batteries

Aqueous zinc ion batteries(ZIBs)with intrinsic safety have great potentials in portable devices,but suffer from limited cycling life mainly caused by serious dendrite growth and unavoidable side reactions of Zn anodes.Herein,graphene interpenetrated Zn(GiZn)hybrid foils are developed for dendrite-free and long-term Zn anodes for high-performance ZIBs.The GiZn anode is prepared by interfacial assembly of reduced graphene oxide(rGO)on the skeletons of zinc foams,followed by mechanical compression into hybrid foils and drying process.The presence of the rGO nanosheets in the GiZn hybrid foils provides abundant zincophilic sites to induce horizontal Zn deposition for Zn metal anodes without the growth of dendrites.Meanwhile,the uniform distribution of rGO nanosheets endows the hybrid foils with superior conductivity and wetting ability with electrolytes for reduced interfacial resistances.As a result,GiZn-based symmetric cells exhibit a small voltage hysteresis of 30.4 mV and remarkable areal capacity of 30 mAh cm^(-2)at 0.5 mA cm^(-2).Further,GiZn anodes also enable the corresponding aqueous Zn||MnO_(2)batteries with high capacity of 168.5 mAh g^(-1)at 8 C,superior to the counterpart with pure Zn foil anodes(72.7 mAh g^(-1)).Therefore,GiZn hybrid foil anodes will shed light on the rational construction of 2D material-interpenetrated Zn hybrid foil anodes for high-performance ZIBs.

Sustainable Lignin-Derived Carbon as Capacity-Kinetics Matched Cathode and Anode towards 4.5 V High-Performance Lithium-Ion Capacitors

The Li-ion capacitors(LICs)develop rapidly due to their double-high features of high-energy density and high-power density.However,the relative low capacity of cathode and sluggish kinetics of anode seriously impede the development of LICs.Herein,the precisely pore-engineered and heteroatomtailored defective hierarchical porous carbons(DHPCs)as large-capacity cathode and high-rate anode to construct high-performance dual-carbon LICs have been developed.The DHPCs are prepared based on triple-activation mechanisms by direct pyrolysis of sustainable lignin with urea to generate the interconnected hierarchical porous structure and plentiful heteroatominduced defects.Benefiting from these advanced merits,DHPCs show the well-matched high capacity and fast kinetics of both cathode and anode,exhibiting large capacities,superior rate capability and long-term lifespan.Both experimental and computational results demonstrate the strong synergistic effect of pore and dopants for Li storage.Consequently,the assembled dual-carbon LIC exhibits high voltage of 4.5 V,high-energy density of 208 Wh kg^(−1),ultrahigh power density of 53.4 kW kg^(−1)and almost zerodecrement cycling lifetime.Impressively,the full device with high mass loading of 9.4 mg cm^(−2)on cathode still outputs high-energy density of 187 Wh kg^(−1),demonstrative of their potential as electrode materials for high-performance electrochemical devices.

High-Performance and Flexible Co-Planar Integrated Microsystem of Carbon-Based All-Solid-State Micro-Supercapacitor and Real-Time Temperature Sensor

With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.

AC Line Filter Electrochemical Capacitors:Materials,Morphology,and Configuration

Recently,more and more supercapacitors(SCs)have been developed as AC line filter capacitors,which are generally named AC line filter electrochemical capacitors(FECs).Compared to traditional bulky aluminum electrolytic capacitors(AECs),FECs have higher capacity and lower space occupancy,which makes them a strong competitor.However,different from the common SCs for energy storage,it is necessary to consider the frequency response of the SCs for AC line filtering,where the contradiction between frequency response and specific capacitance is a challenge.The researchers have proposed different solutions from the perspective of materials,morphology,and configuration for this challenge.Based on the above background,in this review,we briefly introduce the principle and parameters of AC line filter electrochemical capacitors.We systematically summarize the state-of-the-art progresses of FECs and discuss their possible application and development in the future.The development of FECs can greatly promote the planarization,integration,and miniaturization of filter capacitors,and provide a new solution for the utilization of green and unstable energy.

Preparation and interface modification of Si3N4f/SiO2 composites

In order to modify the interface, Si ON coating was introduced on the surface of silicon nitride fiber by perhydropolysilazane conversion method. Si-3N4f/SiO2 and Si-3N4f/Si ONc/SiO2 composites were prepared by sol-gel method to explore the influence of Si ON coating on the mechanical properties of composites.The results show that with the protection of Si ON coating, Si-3N4fiber enjoys a strength increase of up to 24.1% and Si-3N4f/Si ONc/SiO2 composites have a tensile strength of 170.5 MPa and a modulus of26.9 GPa, respectively. After 1000℃ annealing in air for 1 h, Si-3N4f/Si ONc/SiO2 composites retain 65.0%of their original strength and show a better toughness than Si-3N4f/SiO2 composites. The improvement of mechanical properties is attributing to the healing effect of Si ON coating as well as its intermediate coefficient of thermal expansion between Si-3N4fiber and SiO2 matrix.