An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horiz...An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horizontal tube furnace on a 40 nm TiO_(2)thin film deposited on a p-type Si(100)substrate.The CuO–TiO_(2)/TiO_(2)/p-Si(100)devices exhibited excellent rectification characteristics under dark and individual photoillumination conditions.The devices showed remarkable photo-response under broadband(300–1100 nm)light illumination at zero bias voltage,indicating the achievement of highly sensitive self-powered photodetectors at visible and near-infrared light illuminations.The maximum response of the devices is observed at 300 nm for an illumination power of 10 W.The response and recovery times were calculated as 86 ms and 78 ms,respectively.Moreover,under a small bias,the devices showed a prompt binary response by altering the current from positive to negative under illumination conditions.The main reason behind this binary response is the low turn-on voltage and photovoltaic characteristics of the devices.Under illumination conditions,the generation of photocurrent is due to the separation of photogenerated electron-hole pairs within the built-in electric field at the CuO–TiO_(2)/TiO_(2)interface.These characteristics make the CuO–TiO_(2)/TiO_(2)broadband photodetectors suitable for applications that require high response speeds and self-sufficient functionality.展开更多
Recently,an extreme narrowband spectral response of only 8 nm in electronic-grade diamond-based photodetectors has been observed by Zheng Wei and his colleagues from Sun Yat-sen University for the first time.A charge ...Recently,an extreme narrowband spectral response of only 8 nm in electronic-grade diamond-based photodetectors has been observed by Zheng Wei and his colleagues from Sun Yat-sen University for the first time.A charge collection narrowing mechanism assisted by free exciton radiative recombination is proposed,which well reveals the characteristic spectral response of diamond.展开更多
以氧化铟锡(indium tin oxide,ITO)为代表的透明导电氧化物(transparent conducting oxide,TCO)在当前光电器件中的重要性日益增长.通过在TCO中引入金属网格构成复合电极,可以在保持良好透明性的前提下有效提升电学性能,同时降低对铟的...以氧化铟锡(indium tin oxide,ITO)为代表的透明导电氧化物(transparent conducting oxide,TCO)在当前光电器件中的重要性日益增长.通过在TCO中引入金属网格构成复合电极,可以在保持良好透明性的前提下有效提升电学性能,同时降低对铟的需求量,并为可穿戴设备所需的柔性电极提供可能方案.对此类电极的电学性能分析,如复合电极方阻随金属网格结构参数的变化,可为电极设计与制备提供基本的出发点,但相关理论尚十分缺乏.本文针对典型的方孔方格型金属网格-TCO复合电极,分别展开基于瑞利模型和基于有限元仿真的电学性能分析.结果表明,孔型近似导致的金属通道显著畸变是复合电极的电学计算中瑞利模型在中高开口率下失效的主要原因.据此,我们采用格型修正,通过提升瑞利模型中的原胞外边界对称性来改善金属通道的畸变.与电极仿真的对比表明,修正后瑞利模型的适用范围明显扩大,其结果可与实验数据很好地拟合,为此类复合透明电极的电学数据分析与结构设计提供了简洁高效的理论工具.展开更多
Lead halide perovskite nanocrystals(PNCs)have received great research interests due to their excellent optoelectronic properties.However,high temperature,inert gas protection and insulating long-chain ligands are used...Lead halide perovskite nanocrystals(PNCs)have received great research interests due to their excellent optoelectronic properties.However,high temperature,inert gas protection and insulating long-chain ligands are used during the conventional hot-injection synthesis of PNCs,which limits their practical applications.In this work,we first develop a simple and scalable polar-solvent-free method for the preparation of full-component APbX_(3)(A=Cs,methylammonium(MA),formamidinium(FA),X=Cl,Br,I)PNCs under ambient condition.Through an exothermic reaction between butylamine(BA)and propionic acid(PA)short ligands,the PbX_(2) precursors could be well dissolved without use of any polar solvent.Meanwhile,the relatively lower growth rate of PNCs in our room-temperature reaction enables us to modulate the synthetic procedure to enhance the scalability(40-fold)and achieve large-scale synthesis.The resultant short ligands passivated PNC inks are compatible with varying solution depositing technique like spray coating for large-area film.Finally,we showcase that adopting the as-prepared MAPbI_(3) PNC inks,a self-powered photodetector is fabricated and shows a high photoresponsivity.These results demonstrate that our ambient-condition synthetic approach can accelerate the preparation of tunable and ready-to-use PNCs towards commercial optoelectronic applications.展开更多
基金supported by the National Natural Science Foundation of China (51972170)the State Key Laboratory of MaterialsOriented Chemical Engineering (SKL-MCE-23A04)+3 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the Jiangsu Specially-Appointed Professor Program. CHEN Zhi-gang thanks the financial support from the Australian Research Council, and QUT Capacity Building Professor Programsupport from the Chongqing Research Program of Basic Research and Frontier Technology (cstc2021jcyj-msxm X0641)the Doctoral “through train” scientific research project of Chongqing (CSTB2022BSXM-JCX0085).
基金CSIR-09/0973(11599)/2021-EMR-I and SERB(Project no:CRG/2021/000255),Department of Science and Technology,Govt.of India。
文摘An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horizontal tube furnace on a 40 nm TiO_(2)thin film deposited on a p-type Si(100)substrate.The CuO–TiO_(2)/TiO_(2)/p-Si(100)devices exhibited excellent rectification characteristics under dark and individual photoillumination conditions.The devices showed remarkable photo-response under broadband(300–1100 nm)light illumination at zero bias voltage,indicating the achievement of highly sensitive self-powered photodetectors at visible and near-infrared light illuminations.The maximum response of the devices is observed at 300 nm for an illumination power of 10 W.The response and recovery times were calculated as 86 ms and 78 ms,respectively.Moreover,under a small bias,the devices showed a prompt binary response by altering the current from positive to negative under illumination conditions.The main reason behind this binary response is the low turn-on voltage and photovoltaic characteristics of the devices.Under illumination conditions,the generation of photocurrent is due to the separation of photogenerated electron-hole pairs within the built-in electric field at the CuO–TiO_(2)/TiO_(2)interface.These characteristics make the CuO–TiO_(2)/TiO_(2)broadband photodetectors suitable for applications that require high response speeds and self-sufficient functionality.
文摘Recently,an extreme narrowband spectral response of only 8 nm in electronic-grade diamond-based photodetectors has been observed by Zheng Wei and his colleagues from Sun Yat-sen University for the first time.A charge collection narrowing mechanism assisted by free exciton radiative recombination is proposed,which well reveals the characteristic spectral response of diamond.
文摘以氧化铟锡(indium tin oxide,ITO)为代表的透明导电氧化物(transparent conducting oxide,TCO)在当前光电器件中的重要性日益增长.通过在TCO中引入金属网格构成复合电极,可以在保持良好透明性的前提下有效提升电学性能,同时降低对铟的需求量,并为可穿戴设备所需的柔性电极提供可能方案.对此类电极的电学性能分析,如复合电极方阻随金属网格结构参数的变化,可为电极设计与制备提供基本的出发点,但相关理论尚十分缺乏.本文针对典型的方孔方格型金属网格-TCO复合电极,分别展开基于瑞利模型和基于有限元仿真的电学性能分析.结果表明,孔型近似导致的金属通道显著畸变是复合电极的电学计算中瑞利模型在中高开口率下失效的主要原因.据此,我们采用格型修正,通过提升瑞利模型中的原胞外边界对称性来改善金属通道的畸变.与电极仿真的对比表明,修正后瑞利模型的适用范围明显扩大,其结果可与实验数据很好地拟合,为此类复合透明电极的电学数据分析与结构设计提供了简洁高效的理论工具.
基金supported by Gansu Province Higher Education Industry Support Plan Project(No.2023CYZC-40)Lanzhou Science and Technology Development Plan Project(No.2023-3-104)。
基金financially supported by the National Key Research and Development Program of China(No.2023YFE0210000)the National Natural Science Foundation of China(Nos.52261145696,52073198)+5 种基金the China National Postdoctoral Program for Innovative Talents(No.BX20230255)the Natural Science Foundation of Jiangsu Province(No.BK20211598)the Jiangsu Funding Program for Excellent Postdoctoral Talent(No.2023ZB405)the Science and Technology Program of Suzhou(No.ST202219)the“111”projectthe Collaborative Innovation Center of Suzhou Nano Science and Technology,Soochow University。
文摘Lead halide perovskite nanocrystals(PNCs)have received great research interests due to their excellent optoelectronic properties.However,high temperature,inert gas protection and insulating long-chain ligands are used during the conventional hot-injection synthesis of PNCs,which limits their practical applications.In this work,we first develop a simple and scalable polar-solvent-free method for the preparation of full-component APbX_(3)(A=Cs,methylammonium(MA),formamidinium(FA),X=Cl,Br,I)PNCs under ambient condition.Through an exothermic reaction between butylamine(BA)and propionic acid(PA)short ligands,the PbX_(2) precursors could be well dissolved without use of any polar solvent.Meanwhile,the relatively lower growth rate of PNCs in our room-temperature reaction enables us to modulate the synthetic procedure to enhance the scalability(40-fold)and achieve large-scale synthesis.The resultant short ligands passivated PNC inks are compatible with varying solution depositing technique like spray coating for large-area film.Finally,we showcase that adopting the as-prepared MAPbI_(3) PNC inks,a self-powered photodetector is fabricated and shows a high photoresponsivity.These results demonstrate that our ambient-condition synthetic approach can accelerate the preparation of tunable and ready-to-use PNCs towards commercial optoelectronic applications.
