期刊文献+
共找到6,332篇文章
< 1 2 250 >
每页显示 20 50 100
Adapter Based on Pre-Trained Language Models for Classification of Medical Text
1
作者 Quan Li 《Journal of Electronic Research and Application》 2024年第3期129-134,共6页
We present an approach to classify medical text at a sentence level automatically.Given the inherent complexity of medical text classification,we employ adapters based on pre-trained language models to extract informa... We present an approach to classify medical text at a sentence level automatically.Given the inherent complexity of medical text classification,we employ adapters based on pre-trained language models to extract information from medical text,facilitating more accurate classification while minimizing the number of trainable parameters.Extensive experiments conducted on various datasets demonstrate the effectiveness of our approach. 展开更多
关键词 Classification of medical text adapter Pre-trained language model
下载PDF
基于Adapter模式的远程教育资源整合
2
作者 李娟 李介 《计算机与数字工程》 2008年第10期192-195,共4页
首先分析各高校远程教育资源信息多平台问题,然后研究了现有系统整合的重要技术难点,在保证整体功能和原有框架的基础上,基于Adapter模式进行了资源系统整合的构建和实现,从而减少多系统带来的共享、安全等问题,是各种资源有效整合共享... 首先分析各高校远程教育资源信息多平台问题,然后研究了现有系统整合的重要技术难点,在保证整体功能和原有框架的基础上,基于Adapter模式进行了资源系统整合的构建和实现,从而减少多系统带来的共享、安全等问题,是各种资源有效整合共享的探索和尝试。 展开更多
关键词 远程教育 系统整合 adapter模式
下载PDF
使用Adapter模式在组态软件中实现串口通讯协议复用
3
作者 沈宇亮 游大海 《微计算机信息》 2004年第12期24-24,54,共2页
本文使用Adapter模式对组态软件中串口通讯协议部分实现复用.应用该方法可以大大减少使用组态软件与第三方设备进行串口通讯的工作量。
关键词 adapter模式 串口通讯 软件复用
下载PDF
基于TTCN-3的移动IPv6协议一致性测试中适配器Adapter的设计与实现
4
作者 刘静 《内蒙古科技与经济》 2010年第6期105-107,共3页
文章介绍了移动IPv6协议的TTCN-3测试系统适配器Adapter的设计与实现;首先根据TTCN-3 Adapter的功能划分,提出了移动IPv6协议一致性测试下Adapter三大模块(即测试系统适配器SA、平台适配器PA和编解码器CD)的测试要求;其次以Tau(测试工具... 文章介绍了移动IPv6协议的TTCN-3测试系统适配器Adapter的设计与实现;首先根据TTCN-3 Adapter的功能划分,提出了移动IPv6协议一致性测试下Adapter三大模块(即测试系统适配器SA、平台适配器PA和编解码器CD)的测试要求;其次以Tau(测试工具)中已提供的Adapter接口函数为基础,设计并实现了针对移动IPv6协议一致性的某些函数的扩展功能;指出了这些函数中的难点所在。 展开更多
关键词 adapter(适配器) TCI TRI 编解码 测试控制
下载PDF
基于Adapter模式的协同办公系统应用整合方案 被引量:1
5
作者 于本浩 王丽芳 《科学技术与工程》 2007年第7期1490-1494,1501,共6页
企业应用集成是目前企业信息化建设的核心问题,企业业务整合和系统集成时数据共享是企业应用集成需要解决的最重要的问题之一。根据Adapter模式技术的特点,分析了协同办公环境下基于消息传输组件的特点,从数据集成的角度,提出了在该环... 企业应用集成是目前企业信息化建设的核心问题,企业业务整合和系统集成时数据共享是企业应用集成需要解决的最重要的问题之一。根据Adapter模式技术的特点,分析了协同办公环境下基于消息传输组件的特点,从数据集成的角度,提出了在该环境下实现信息资源共享的ABI模式的体系框架,并对集成方案的模型、消息传输组件及框架进行了详细论述。 展开更多
关键词 企业应用集成 adapter模式 协同办公 企业适配器集成(ABI)
下载PDF
3D heterogeneous integration of wideband RF chips using silicon-based adapter board technology 被引量:3
6
作者 Wang Yong Wei Wei +4 位作者 Yang Dong Sun Biao Zhang Xingwen Zhang Youming Huang Fengyi 《Journal of Southeast University(English Edition)》 EI CAS 2021年第1期8-13,共6页
An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapt... An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapter board technology.Four layers of high-resistance silicon substrate stack packaging are implemented based on the wafer-level gold-gold bonding process.Each layer adopts though silicon via(TSV)technology to realize signal interconnection.A core monolithic integrated microwave chip(MMIC)is embedded in the silicon cavity,and the silicon-based filter is integrated with the high-resistance silicon substrate.The interconnect line,cavity and filter of the silicon-based adapter board are designed with AutoCAD,and HFSS is adopted for 3D electromagnetic field simulation.According to the measured results,the radio frequency(RF)of the mixing multi-function chip is 40-44 GHz and its intermediate frequency(IF)can cover the Ku band with a chip size of 10 mm×11 mm×1 mm.The multiplier multi-function chip operates at 16-20 GHz.The fundamental suppression is greater than 50 dB and the second harmonic suppression is better than 40 dB with a chip size of 8 mm×8 mm×1 mm.The cascaded fully assembled mixing component achieves a spur of better than-50 dBc and a gain of better than 15 dB. 展开更多
关键词 silicon-based adapter board frequency mixing frequency multiplier multi-function chip
下载PDF
基于Android平台的通用Adapter适配器的设计与实现
7
作者 武伟 《电脑知识与技术》 2016年第4期99-101,共3页
Android开发中,ListView列表是使用率最高的UI组件,传统开发模式中,ListView的代码编写比较繁琐,项目中充斥着大量的Adapter适配器,该文在分析ListView开发原理的基础上,设计并实现一个可以通用于各种ListView场景开发的Adapter适配器,... Android开发中,ListView列表是使用率最高的UI组件,传统开发模式中,ListView的代码编写比较繁琐,项目中充斥着大量的Adapter适配器,该文在分析ListView开发原理的基础上,设计并实现一个可以通用于各种ListView场景开发的Adapter适配器,使得无论多少ListView,只需一个Adapter适配器,从而解决项目开发中代码高冗余、高复杂、管理麻烦等实际问题。 展开更多
关键词 ANDROID LISTVIEW adapter 适配器
下载PDF
ACE与GoF设计模式——Adapter模式在ACE内存管理类中的应用 被引量:1
8
作者 马维达 《程序员》 2003年第10期92-93,共2页
ACE(Adaptive Communication Environment)是用于开发高性能网络化应用与下一代中间件的面向对象框架。除了许多专用于开发网络通信软件的设计模式(比如 Reactor、Proactor、Half-Sync/Half-Async,等等),ACE还对GoF的Design Patten一书... ACE(Adaptive Communication Environment)是用于开发高性能网络化应用与下一代中间件的面向对象框架。除了许多专用于开发网络通信软件的设计模式(比如 Reactor、Proactor、Half-Sync/Half-Async,等等),ACE还对GoF的Design Patten一书中的许多设计模式作了大量应用。 展开更多
关键词 ACE GOF 设计模式 adapter模式 ACE内存管理 网络化 网络通信软件 可扩展性 模板参数 内存池
下载PDF
Structural Finite Element Software Coupling Using Adapter Elements
9
作者 Andreas H.Schellenberg Yuli Huang Stephen A.Mahin 《Computer Modeling in Engineering & Sciences》 SCIE EI 2019年第9期719-737,共19页
This paper describes a versatile and computationally efficient method for coupling several finite element analysis(FEA)programs together so that the unique modeling and analysis capabilities of each code can be utiliz... This paper describes a versatile and computationally efficient method for coupling several finite element analysis(FEA)programs together so that the unique modeling and analysis capabilities of each code can be utilized simultaneously to simulate the static or dynamic response of a complete numerical system.An arbitrary number of finite element analysis software packages can be coupled by adding two special types of elements,namely generic and adapter elements,to each of the finite element applications using their programming interface.These elements are inserted at the interfaces between the different sub-domains of the complete system modeled by each finite element analysis software package.Exchange of data between the coupled FEA codes is accomplished in a modular and synchronized manner using OpenFresco(Opensource Framework for Experimental Setup and Control).OpenFresco is an objectoriented,environment independent software framework initially developed for hybrid simulation in which certain aspects of a complete structure are simulated numerically and other aspects are simultaneously tested physically.An important practical advantage of this coupled analysis approach is that all of the connected FEA codes run concurrently and continuously,decreasing analysis time consumption by an order of magnitude or more compared to more traditional approaches that shut down and restart the coupled analysis codes at each integration time step.The implementation and accuracy of this approach to FE software coupling are demonstrated using dynamic analyses of three simple structural models from the field of earthquake engineering. 展开更多
关键词 Software COUPLING CO-SIMULATION adapter ELEMENT OpenFresco
下载PDF
Study on influencing factors of adapters separating with the underwater missile
10
作者 傅德彬 牛青林 +1 位作者 刘小军 李霞 《Journal of Beijing Institute of Technology》 EI CAS 2015年第2期158-163,共6页
To analyze main factors affecting the separation reliability between a missile and adapters for the launching process, a six DOF underwater dynamic model for the missile and adapters is utilized to simulate the separa... To analyze main factors affecting the separation reliability between a missile and adapters for the launching process, a six DOF underwater dynamic model for the missile and adapters is utilized to simulate the separation process, considering elastic forces of separating springs, hydrodynamic forces, gravity and buoyancy. Moreover, a criterion based on the maximum separating distance is put forward to determine whether adapters separate with the missile reliably. The results show that the magnitude and position of elastic force, the wedge angle and mass of the adapter significantly affect the separating process. The local sensitivity analysis for the reference status of design parameters demonstrates that the wedge angle of adapters has the maximum influence about 70. 4% on the separating distance. 展开更多
关键词 adapter hydrodynamic force separating spring reliability criterion
下载PDF
Design and Test of Multibus Adapter System on a Chip for Fault Tolerant Computer Systems
11
作者 Yang Yinghua, Huang Chang, Meng Biao, Zhang Xing, Yu Shan 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 1992年第4期5-6,2,共3页
In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant... In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant computer system on a single chip of 5000 gate CMOS gate array. The design, fabrication and test of this single chip system will be discussed.. 展开更多
关键词 BUS Design and Test of Multibus adapter System on a Chip for Fault Tolerant Computer Systems CHIP TEST
下载PDF
The Design and Experiment Studies of Optical Adapter with Integrated Dust Protection and Shutter Design
12
作者 Samuel I-En Lin 《Optics and Photonics Journal》 2011年第4期189-196,共8页
High power lasers (> +21dBm) have gradually become the common solution for signal transmitting systems including regional cable television, Fiber To The Home (FTTH), and gigabit passive optical networks (G- PONs) d... High power lasers (> +21dBm) have gradually become the common solution for signal transmitting systems including regional cable television, Fiber To The Home (FTTH), and gigabit passive optical networks (G- PONs) due to their ability to generate signals that can be transmitted over long distances. However, if protective design is not implemented in the facility at the client side, users may be exposed to health hazards such as eye damage from these high-power lasers. High-power optical adapters with laser shutter use metal masks to prevent eye exposure to direct laser beams. They have progressively replaced conventional optical adapters and entered the market mainstream. Our study uses the Elastic-Plastic theory together with parametric design to investigate the effect of geometry on the initial spring-back angle of a laser shutter. Once the force stabilizes, the angles of the initial spring back are found to be the same as the simulated results for several attempts. In our study, it is observed that factors including the thickness of the metal masking plate, the initial design angle, the stiffness of the material and the boundary conditions have significant influence on the spring back angle. These can be used as references in design control. 展开更多
关键词 High Power Leaser ELASTIC-PLASTIC Theory Laser SHUTTER OPTICAL adapter
下载PDF
Adapters.com推出新款芯片改装适配器
13
《现代电子技术》 2005年第6期i003-i003,共1页
Adapters.com的芯片改装(Chip—Changer)适配器系列又添新品。这类适配器可使设计人员充分利用因器件更新、器件布局及高昂的电路板修改费用而报废的现有电路板。
关键词 adapters.com 芯片改装适配器 电路板 PCB布线模式
下载PDF
Standard for Universal Power Adapter for Mobile Terminals
14
作者 Meng Meng 《China Standardization》 2012年第4期90-92,共3页
This paper introduces the choices of the technology solutions pertinent to the industrial standard of Chinese communications industry, YD/T 1591 Technical Requirements and Test Method of Charger and lnterface for Mobi... This paper introduces the choices of the technology solutions pertinent to the industrial standard of Chinese communications industry, YD/T 1591 Technical Requirements and Test Method of Charger and lnterface for Mobile Telecommunication Terminal Equipment, as well as its development and revision process. It also elaborates the technology contents for Recommendation of Improving the Standard ITU-TL.1000. 展开更多
关键词 Mobile adapter unification STANDARD
下载PDF
HomePlug Adapter电源线网络系统微星EC14H
15
《电子与电脑》 2004年第10期32-32,共1页
许多人认为,当传统布线网络不易使用的地方,可以用无线网络取代,然而无线网络会受阻隔物的限制,尤其是水泥隔间的干扰,因此,透过走电源线的网络通信界面,就成为在此环境中的替代解决方案。针对这样的市场需求,微星推出可用电源线当网络... 许多人认为,当传统布线网络不易使用的地方,可以用无线网络取代,然而无线网络会受阻隔物的限制,尤其是水泥隔间的干扰,因此,透过走电源线的网络通信界面,就成为在此环境中的替代解决方案。针对这样的市场需求,微星推出可用电源线当网络传输界面的微星EC14H电源线网络转换器(HomePlug Adapter),该产品支持HomePlug 1.0.1最新标准,提供最大14Mbps的传输速度。 展开更多
关键词 HOMEPLUG adapter 电源线网络系统 微星公司 EC14H 外观设计
下载PDF
Electrical anisotropy in two-dimensional reduced graphene oxide/polypyrrole-based ordered conjugated system ensure multi-stimulus response signal adapter
16
作者 Yuqiao Chai Ruoqi Chen +13 位作者 Xinlei Ma Yonglin He Huanrong Zhang Tianlai Xia Jitao Chen Yushu Wang Hui Ma Xusheng Wang Wei Rao Xinyue Zhang Yapei Wang Junhui Ji Fengwang Li Mianqi Xue 《Science China Materials》 SCIE EI CAS 2024年第12期3966-3975,共10页
Electronic technology,based on signal conversion induced by voltage stimulation,forms the core foundation of the state-of-the-art intelligent devices,tools,and equipment.Such conversions are inherently binary and limi... Electronic technology,based on signal conversion induced by voltage stimulation,forms the core foundation of the state-of-the-art intelligent devices,tools,and equipment.Such conversions are inherently binary and limited because they rely solely on voltage,which presents challenges for many emerging frontier applications.Here,a two-dimensional ordered conjugated system of reduced graphene oxide/polypyrrole(rGO/PPy)has been developed.Multi-stimulus response signal adapters have been constructed,utilizing the electrical anisotropy inherent in the rGO/PPy system.This electrical anisotropy,derived from the quasi-two-dimensional geometry of rGO/PPy,enables the device to produce distinct electrical signals in response to various stimuli.With effective responses to light and pressure,the two most common input stimuli other than voltage,it can output quaternary/denary signals and visual optical signals,as well as enables information encryption using passive devices.Furthermore,the signal adapter demonstrates high cyclic stability under repeated pressure and/or light loading.The successful development of this low-cost,scalable signal adapter paves the way for the next-generation of intelligent systems,promising advancements in human-computer interaction,electronic skin,biological implant equipment,and related fields. 展开更多
关键词 electrical anisotropy signal adapters polypyrrole graphene two-dimensional conjugated system
原文传递
基于ChatGLM的水生动物疾病诊断智能对话系统的优化研究
17
作者 尹娴 冯艳红 叶仕根 《现代电子技术》 北大核心 2024年第14期177-181,共5页
水产品作为重要的食物来源之一,在养殖过程中出现的疾病问题严重影响着养殖业的可持续发展。针对水生动物疾病诊断智能对话系统存在复杂的专业性知识和准确性低的问题,提出一种基于ChatGLM模型的改进水生动物疾病诊断相关问题的优化方... 水产品作为重要的食物来源之一,在养殖过程中出现的疾病问题严重影响着养殖业的可持续发展。针对水生动物疾病诊断智能对话系统存在复杂的专业性知识和准确性低的问题,提出一种基于ChatGLM模型的改进水生动物疾病诊断相关问题的优化方法。该方法通过在ChatGLM模型的中间层插入Adapter模块,针对相关的专业问题进行微调,提高了模型的专业性和准确性。同时采用P-tuning方法对输入部分进行高效的参数微调,使得对特定任务的调整更加精确。通过在水生动物疾病诊断对话数据集上的验证得出,该方法的双语评估替补(BLEU)指标从65.3%提升至75.1%,有效地解决了水生动物疾病诊断智能对话系统存在的准确性和专业性问题,为水生动物疾病诊断提供了有价值的辅助决策。 展开更多
关键词 ChatGLM 水生动物疾病诊断 智能对话系统 adapter模块 P-tuning方法 BLEU
下载PDF
基于改进DETR的电力作业现场安全行为识别方法
18
作者 郭鹏天 李黎 +3 位作者 王勇 郑碧煌 王晓辉 陈勇 《电力信息与通信技术》 2024年第8期63-70,共8页
针对电力作业现场采集的图像样本少,且正负样本分布不均衡的问题,文章提出一种改进检测变压器(detection transformer,DETR)的电力作业现场安全行为识别方法。一方面,通过多次预训练的方式提高DETR模型的泛化性能;另一方面,在DETR模型... 针对电力作业现场采集的图像样本少,且正负样本分布不均衡的问题,文章提出一种改进检测变压器(detection transformer,DETR)的电力作业现场安全行为识别方法。一方面,通过多次预训练的方式提高DETR模型的泛化性能;另一方面,在DETR模型中融入Adapter模块,利用少量样本进行微调。实验结果表明,所提方法在安全帽佩戴识别、短袖短裤识别、安全带佩戴识别场景中实现了较高的检测精度。在使用100张样本训练的条件下,平均精度为0.81,比现阶段先进的目标检测模型YOLOv5和Faster R-CNN分别高0.02和0.03;在使用300张训练样本的条件下,平均精度为0.84,比YOLOv5和Faster R-CNN分别高0.01和0.03,基于改进的DETR方法实现了端到端的训练,通过Adapter微调能够实现其他任务场景的快速迁移。 展开更多
关键词 DETR adapter 目标检测 安全行为识别 小样本学习
下载PDF
Structure Design of Underwater Micro Robot
19
作者 Md Shahriar Sujan Joy Howlader +1 位作者 Md Jahangir Alam Md Al Imran Tapu 《Modern Mechanical Engineering》 2024年第1期12-24,共13页
A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements... A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements can be carried out, permitting distinctive moving prospects. After presenting our configuration and delineating a bunch of potential structures, a helpful model dependent on open-source equipment and programming arrangements has been presented conditionally. The model can be effectively tried in a few makes-a plunge streams and lakes throughout the planet. The unwavering quality of the printed models can be strained distinctly in generally shallow waters. Nonetheless, we accept that their accessibility will inspire the overall population to construct and test submerged robots, subsequently accelerating the improvement of imaginative arrangements and applications. 展开更多
关键词 Submergible Robot THRUSTER adapter Raspberry Pi 3D Printer Open Source Software
下载PDF
中国改编指南的现状分析 被引量:1
20
作者 王玲 任亚轩 +7 位作者 罗旭飞 朱迪 李哲玮 王晔 王冰怡 张化语 杨书 陈耀龙 《协和医学杂志》 CSCD 北大核心 2024年第1期192-201,共10页
目的分析中国改编指南的制订现状及其方法学质量和报告质量,为我国改编指南的制订和发展提供参考。方法系统检索中国知网、万方数据知识服务平台、中国生物医学文献数据库、PubMed数据库,纳入2015—2023年由中国研究者或机构牵头制订的... 目的分析中国改编指南的制订现状及其方法学质量和报告质量,为我国改编指南的制订和发展提供参考。方法系统检索中国知网、万方数据知识服务平台、中国生物医学文献数据库、PubMed数据库,纳入2015—2023年由中国研究者或机构牵头制订的改编指南,提取改编指南的基本信息,采用AGREEⅡ和RIGHT-Ad@pt工具评价改编指南的方法学质量和报告质量。结果共纳入14部改编指南,主要集中于护理领域(42.9%,6/14),最常采用的改编方法是ADAPTE方法(71.4%,10/14),参照的原指南主要来自美国、英国和国际组织。AGREEⅡ工具的评估结果显示,改编指南的方法学质量平均得分为36.6%,表达明晰性和制订严谨性领域得分相对较高(44.4%和54.9%),应用性领域得分最低(15.3%);RIGHT-Ad@pt工具的评估结果显示,改编指南的报告质量相对较好,报告率最高为91.2%,最低为35.3%,其中7部报告率均高于70%。结论中国改编指南仍处于起步阶段,数量少且主要集中于护理领域,最常采用的改编方法是ADAPTE方法;改编指南的方法学质量和报告质量有待进一步提升,未来应针对改编指南制订的具体条件和时机开展更多相关研究。 展开更多
关键词 临床实践指南 改编指南 ADAPTE
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部