Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as ...Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as the catalysts for the synthesis of bisdihydropyrimidin -2(1H)-ones from aromatic dialdehydes,1,3-dicarbonyl compounds and urea at 90℃under solvent-free conditions.展开更多
Reaction of 4,4’-(1,4-phenylene)bis(5-acetyl-6-methyl-2-thioxo-1,2-dihydropyridine-3-carbonitrile) (1) with methyl iodide afforded the 4,4’-(1,4-phenylene)bis(5-acetyl-6-methyl-2-(methylthio)nicotinonitrile) (2). Th...Reaction of 4,4’-(1,4-phenylene)bis(5-acetyl-6-methyl-2-thioxo-1,2-dihydropyridine-3-carbonitrile) (1) with methyl iodide afforded the 4,4’-(1,4-phenylene)bis(5-acetyl-6-methyl-2-(methylthio)nicotinonitrile) (2). The reaction of 2 with hydrazine hydrate followed by diazotization reaction af-forded the 1,1’-(1,4-phenylenebis(3-amino-6-methyl-1H-pyrazolo[3,4-b]pyridine-4,5-diyl))bis(e-than-1-one) (3) and 1,1’-(1,4-phenylenebis(3-(chlorodiazenyl)-6-methyl-1H-pyrazolo[3,4-b]-pyridine-4,5-diyl))bis(ethan-1-one) (4) respectively. On the other hand, reaction of 4 with malononitrile, 2-cyanoethanethioamide, ethyl acetoacetate, acetyl acetone, ethyl benzoylacetate, diethylmalonate, ethyl cyanoacetate and phenacylbromide aiming to build up pyrazolotriazine or pyrazole ring on the ring system of 4. Structures of all newly synthesized heterocyclic compounds in the present study were confirmed by considering the data of IR, 1H NMR, mass spectra as well as that of elemental analyses.展开更多
Smooth and strong copper foils are highly required for the development of printed circuit boards and Li-ion batteries.Adding additives is an efficient and low-cost method to enhance electrodeposited copper foils.Here ...Smooth and strong copper foils are highly required for the development of printed circuit boards and Li-ion batteries.Adding additives is an efficient and low-cost method to enhance electrodeposited copper foils.Here we chose Bis-(3-sulfopropyl)-disulfide(SPS)as the additive and investigated its concentration on the surface roughness and tensile strength of the electrodeposited copper foils.A copper foil with the smoothest surface(Rz=2.1μm)and the highest tensile strength(~338 MPa)was prepared with1.5 mg/L SPS.The contact angle on the copper foil decreased with the reduction of surface roughness.The enhancing mechanism of the SPS was investigated by scanning electron microscopy and X-ray diffraction.The refined grain and enhanced(220)texture were considered to be the radical reason for the smooth and strong copper foils.The electrochemical results prove the suppressing effect is related to the SPS adsorption.展开更多
文摘Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as the catalysts for the synthesis of bisdihydropyrimidin -2(1H)-ones from aromatic dialdehydes,1,3-dicarbonyl compounds and urea at 90℃under solvent-free conditions.
文摘Reaction of 4,4’-(1,4-phenylene)bis(5-acetyl-6-methyl-2-thioxo-1,2-dihydropyridine-3-carbonitrile) (1) with methyl iodide afforded the 4,4’-(1,4-phenylene)bis(5-acetyl-6-methyl-2-(methylthio)nicotinonitrile) (2). The reaction of 2 with hydrazine hydrate followed by diazotization reaction af-forded the 1,1’-(1,4-phenylenebis(3-amino-6-methyl-1H-pyrazolo[3,4-b]pyridine-4,5-diyl))bis(e-than-1-one) (3) and 1,1’-(1,4-phenylenebis(3-(chlorodiazenyl)-6-methyl-1H-pyrazolo[3,4-b]-pyridine-4,5-diyl))bis(ethan-1-one) (4) respectively. On the other hand, reaction of 4 with malononitrile, 2-cyanoethanethioamide, ethyl acetoacetate, acetyl acetone, ethyl benzoylacetate, diethylmalonate, ethyl cyanoacetate and phenacylbromide aiming to build up pyrazolotriazine or pyrazole ring on the ring system of 4. Structures of all newly synthesized heterocyclic compounds in the present study were confirmed by considering the data of IR, 1H NMR, mass spectra as well as that of elemental analyses.
基金the National Key R&D Program of China(No.2017YFB1200800)the National Natural Science Foundation of China(Nos.51827810 and 51637009)the Fundamental Research Funds for the Central Universities(2018XZZX001-05)。
文摘Smooth and strong copper foils are highly required for the development of printed circuit boards and Li-ion batteries.Adding additives is an efficient and low-cost method to enhance electrodeposited copper foils.Here we chose Bis-(3-sulfopropyl)-disulfide(SPS)as the additive and investigated its concentration on the surface roughness and tensile strength of the electrodeposited copper foils.A copper foil with the smoothest surface(Rz=2.1μm)and the highest tensile strength(~338 MPa)was prepared with1.5 mg/L SPS.The contact angle on the copper foil decreased with the reduction of surface roughness.The enhancing mechanism of the SPS was investigated by scanning electron microscopy and X-ray diffraction.The refined grain and enhanced(220)texture were considered to be the radical reason for the smooth and strong copper foils.The electrochemical results prove the suppressing effect is related to the SPS adsorption.