The physics design of HEPS Linac bunching system

Purpose The High Energy Photon Source is a fourth-generation synchrotron radiation source being built in China.It is comprised of a storage ring,a full energy booster,a 500-MeV Linac and three transport lines.The pulse charge at the exit of the Linac is required to be up to 7 nC.Both single bunch and three bunches in a beam pulse might be needed according to the studies on instabilities of the booster and the beam dynamic of the main Linac.Methods A bunching system consisting of both sub-harmonic and fundamental frequency structures is designed to meet the requirements.To obtain high transmission efficiency and control the emittance growth,multi-objective genetic algorithm is introduced to optimize the electromagnetic parameters of these structures.Results In this paper,detailed optimization process and the final results are presented.The total transmission efficiency of the bunching system is 97%,and the transmission efficiency of the main bunch is 95%.The normalized RMS emittance of 8.5 nC included beam charge is smaller than 60 mm mrad.Conclusions The design of the bunching system is presented,and both the pulse charge and the beam emittance well meet the design requirement.

Studies on an S-band bunching system with hybrid buncher

Generally, a standard bunching system is composed by an SW pre-buncher, a TW buncher and a standard accelerating section. However, there is one way to simplify the whole system to some extent by using the hybrid buncher, which is a combined structure of the SW pre-buncher and the TW buncher. Here the beam dynamics studies on an S-band bunching system with the hybrid buncher is presented, and simulation results show that similar beam performance can be obtained at the linac exit by using this kind of bunching system rather than the standard one. In the meantime, the structure design of the hybrid buncher is also described. Furthermore, the standard accelerating section can also be integrated with the hybrid buncher, which can further simplify the usual bunching system and lower the construction cost.

Terahertz coherent transition radiation based on an ultrashort electron bunching beam

The experimental result of terahertz （THz） coherent transition radiation generated from an ultrashort electron bunching beam is reported. During this experiment, the window for THz transmission from ultrahigh vacuum to free air is tested. The compact measurement system which can simultaneously test the THz wave power and frequency is built and proofed. With the help of improved Martin-Puplett interferometer and Kramers-Krong transform, the longitudinal bunch length is measured. The results show that the peak power of THz radiation wave is more than 80 kW, and its radiation frequency is from 0.1 THz to 1.5 THz.

Development of readout electronics for bunch arrival-time monitor system at SXFEL

A bunch arrival-time monitor(BAM) system,based on electro-optical intensity modulation scheme, is under study at Shanghai Soft X-ray Free Electron Laser.The aim of the study is to achieve high-precision time measurement for minimizing bunch fluctuations. A readout electronics is developed to fulfill the requirements of the BAM system. The readout electronics is mainly composed of a signal conditioning circuit, field-programmable gate array(FPGA), mezzanine card(FMC150), and powerful FPGA carrier board. The signal conditioning circuit converts the laser pulses into electrical pulse signals using a photodiode. Thereafter, it performs splitting and low-noise amplification to achieve the best voltage sampling performance of the dual-channel analog-to-digital converter(ADC) in FMC150. The FMC150 ADC daughter card includes a 14-bit 250 Msps dual-channel high-speed ADC,a clock configuration, and a management module. The powerful FPGA carrier board is a commercial high-performance Xilinx Kintex-7 FPGA evaluation board. To achieve clock and data alignment for ADC data capture at a high sampling rate, we used ISERDES, IDELAY, and dedicated carry-in resources in the Kintex-7 FPGA. This paper presents a detailed development of the readout electronics in the BAM system and its performance.

A discrete-event model to simulate the effect of truck bunching due to payload variance on cycle time, hauled mine materials and fuel consumption

Data collected from truck payload management systems at various surface mines shows that the payload variance is significant and must be considered in analysing the mine productivity,energy consumption,greenhouse gas emissions and associated cost.Payload variance causes significant differences in gross vehicle weights.Heavily loaded trucks travel slower up ramps than lightly loaded trucks.Faster trucks are slowed by the presence of slower trucks,resulting in‘bunching’,production losses and increasing fuel consumptions.This paper simulates the truck bunching phenomena in large surface mines to improve truck and shovel systems’efficiency and minimise fuel consumption.The study concentrated on completing a practical simulation model based on a discrete event method which is most commonly used in this field of research in other industries.The simulation model has been validated by a dataset collected from a large surface mine in Arizona state,USA.The results have shown that there is a good agreement between the actual and estimated values of investigated parameters.

Development of a control system for the fourth-harmonic cavity of the HLS storage ring

Harmonic RF cavities are commonly used in storage rings to lengthen the bunches and thus suppress the beam's instabilities and increase its Touschek lifetime. The voltage and phase of the electromagnetic fields in the harmonic cavity are of great importance for stretching the bunch. In the Hefei Light Source storage ring, a passive fourth-harmonic cavity is installed, and the cavity is monitored and controlled by an analog control module provided by its manufacturer. To vary and maintain the voltage of the harmonic cavity in a more effective way, a digital proportional, integral, and derivative feedback system based on the Experimental Physics and Industrial Control System is developed on top of the analog control module. This paper reports the details of the development of this voltage control system. Some test and operational results are also presented.

Low specific contact resistance on epitaxial p-type 4H-SiC with a step-bunching surface

This paper reports the performances of Ti/Al based ohmic contacts fabricated on highly doped p-type 4H-SiC epitaxial layer which has a severe step-bunching surface. Different contact schemes are investigated based on the AI：Ti composition with no more than 50 at.% Al. The specific contact resistance （SCR） is obtained to be as low as 2.6 × 10-6Ωcm2 for the bilayered Ti（100 nm）/Al（100 nm） contact treated with 3 rain rapid thermal annealing （RTA） at 1000 ℃. The microstructure analyses examined by physical and chemical characterization techniques reveal an alloy-assisted ohmic contact formation mechanism, i.e., a high degree of alloying plays a decisive role in forming the interfacial ternary Ti3SiC2 dominating the ohmic behavior of the Ti/Al based contact. Furthermore, a globally covered Ti3 SiC2 layer with （0001）-oriented texture can be formed, regardless of the surface step bunching as well as its structural evolution during the metallization annealing.

Direct observation of bunching of elementary steps on protein crystals under forced flow conditions

Bunching of elementary steps by solution flow is still not yet clarified for protein crystals. Hence, in this study, we observed elementary steps on crystal surfaces of model protein hen egg-white lysozyme （HEWL） under forced flow conditions, by our advanced optical microscopy. We found that in the case of a HEWL solution of 99.99% purity, forced flow changed bunched steps into elementary ones （debunching） on tetragonal HEWL crystals. In contrast, in the case of a HEWL solution of 98.5% purity, forced flow significantly induced bunching of elementary steps. These results indicate that in the case of HEWL crystals, the mass transfer of impurities is more significantly enhanced by forced solution flow than that of solute HEWL molecules. We also showed that forced flow induced the incorporation of microcrystals into a mother crystal and the subsequent formation of screw dislocations and spiral growth hillocks.

High-brightness photo-injector with standing-wave buncher-based ballistic bunching scheme for inverse Compton scattering light source

We report our recent progress in the design and simulation of a high-brightness S-band photo-injector with a ballistic bunching scheme aimed at driving an inverse Compton scattering(ICS)X-ray source.By adding a short standing-wave buncher between the RF gun and first booster in a conventional S-band photo-injector,electron bunches with a 500 pC charge can be compressed to the sub-picosecond level with very limited input RF power and an unchanged basic layout of the photo-injector.Beam dynamics analysis indicates that fine tuning of the focusing strength of the gun and linac solenoid can well balance additional focusing provided by the standing wave buncher and generate a well-compensated transverse emittance.Thorough bunching dynamics simulations with different operating conditions of the buncher show that a buncher with more cells and a moderate gradient is suitable for simultaneously obtaining a short bunch duration and low emittance.In a typical case of a 9-cell buncher with a 38 MV/m gradient,an ultrashort bunch duration of 0.5 ps(corresponding to a compression ratio of>5)and a low emittance of<1 mm mrad can be readily obtained for a 500 pC electron pulse.This feasible ballistic bunching scheme will facilitate the implementation of an ultrashort pulse mode inverse Compton scattering X-ray source on most existing S-band photo-injectors.

Photon bunching and anti-bunching with two dipole-coupled atoms in an optical cavity

We investigate the effect of the dipole–dipole interaction(DDI) on the photon statistics with two atoms trapped in an optical cavity driven by a laser field and subjected to cooperative emission. By means of the quantum trajectory analysis and the second-order correlation functions, we show that the photon statistics of the cavity transmission can be flexibly modulated by the DDI while the incoming coherent laser selectively excites the atom–cavity system’s nonlinear Jaynes–Cummings ladder of excited states. Finally, we find that the effect of the cooperatively atomic emission can also be revealed by the numerical simulations and can be explained with a simplified picture. The DDI induced nonlinearity gives rise to highly nonclassical photon emission from the cavity that is significant for quantum information processing and quantum communication.

Optical and atomic force microscopic study on step bunching in BaB_2O_4 crystal growth

The formation of macrostep during high-temperature phase of barium meta-borate （^-BaB204） single crystal growth has been investigated by both optical in-situ observation system and atomic force microscopy （AFM）. The in- si$u observation results demonstrate that the critical linear size of growing facet exceeding the size that the macrostep generates is significantly anisotropic. The critical linear sizes are around 280 ~m and 620 ~m for {1010} and （T010} planes, respectively. AFM study illustrates that macrostep train with a height of 150 nm^200 nm is one typical morphological feature of the as-grown crystal surface. The riser of each macrostep consists of several straight and parallel sub-steps, indicating the occurrence of step bunching. Additionally, triangular sub-steps with heights of several nanometers on the treads of the macrosteps are found to be another typical feature of surface morphology, which implies a microscopically competitive bunching of sub-steps between various crystallographic orientations.

The Numerical Simulation of Flow Field of Jet System

In this paper, the internal fluid motion of a jet system is described by the Navier Stokes mechanics equations. For the simulation of the motion, the penalty function finite element method is used, and the velocity vectors and stream function curves are obtained. Using the Prandtl theory, this paper derives the free jet velocity and the jet bunch width in a half-space, the latter of which is amended by experiment. The results obtained in this paper are applied to micro-type high pressure water jet cleaner and the ejector of rocket engine.

Determining beam transverse absolute position by triangulation of multi-electrode signal phase differences

Accurate measurement of the transverse position of a beam is crucial in particle accelerators because it plays a key role in determining the beam parameters.Existing methods for beam-position measurement rely on the detection of image currents induced on electrodes or narrow-band wake field induced by a beam passing through a cavity-type structure.However,these methods have limitations.The indirect measurement of multiple parameters is computationally complex,requiring external calibration to determine the system parameters in advance.Furthermore,the utilization of the beam signal information is incomplete.Hence,this study proposes a novel method for measuring the absolute electron beam transverse position.By utilizing the geometric relationship between the center position of the measured electron beam and multiple detection electrodes and by analyzing the differences in the arrival times of the beam signals detected by these electrodes,the absolute transverse position of the electron beam crossing the electrode plane can be calculated.This method features absolute position measurement,a position sensitivity coefficient independent of vacuum chamber apertures,and no requirement for a symmetrical detector electrode layout.The feasibility of this method is validated through numerical simulations and beam experiments.

Ultrahigh spatiotemporal resolution beam signal reconstruction with bunch phase compensation

Various electromagnetic signals are excited by the beam in the acceleration and beam-diagnostic elements of a particle accelerator.It is important to obtain time-domain waveforms of these signals with high temporal resolution for research,such as the study of beam–cavity interactions and bunch-by-bunch parameter measurements.Therefore,a signal reconstruction algorithm with ultrahigh spatiotemporal resolution and bunch phase compensation based on equivalent sampling is proposed in this paper.Compared with traditional equivalent sampling,the use of phase compensation and setting the bunch signal zero-crossing point as the time reference can construct a more accurate reconstructed signal.The basic principles of the method,simulation,and experimental comparison are also introduced.Based on the beam test platform of the Shanghai Synchrotron Radiation Facility(SSRF)and the method of experimental verification,the factors that affect the reconstructed signal quality are analyzed and discussed,including the depth of the sampled data,quantization noise of analog-to-digital converter,beam transverse oscillation,and longitudinal oscillation.The results of the beam experiments show that under the user operation conditions of the SSRF,a beam excitation signal with an amplitude uncertainty of 2%can be reconstructed.

Oil Palm Fiber Hybrid Composites: A Recent Review

Composite materials from oil palmfiber enhance sustainability by utilizing renewable resources,reducing depen-dence on non-renewable materials,and lessening environmental impact.Despite their mechanical and dimen-sional stability limitations,oil palmfiber-based polymer composites offer significant advantages,such as natural abundance,potential weight reduction,and cost-effectiveness due to local availability and renewability.The growing interest in oil palm hybrid composites,made from blending differentfibers,is due to their custo-mizable mechanical and physical properties.Hybridization is one of the most effective methods to reinforce and improve the performance of oil palm-derived composite materials.This review investigates the structural qualities of hybrid composites made from oil palmfibers,their suitability for diverse applications,and recent advancements in thefield.By focusing on the availability,properties,applications,challenges,and future direc-tions of oil palmfiber hybrid composites,this review highlights the potential of these materials to enhance mechanical and functional properties,thereby contributing to sustainable development and innovation in com-posite materials.

Factors affecting headway regularity on bus routes

The common phenomenon of uneven headway in bus service is explored based on the automatic vehicle location （AVL） data of Route 2 in Yichun City of Jiangxi province from 6：00 to 9：00 in the morning. The headway regularity of two stages 6： 00--7：00 and 7： 00--9：00 is comparatively analyzed, and it is found that both the traffic conditions and the passenger demand affect headway regularity. A bus arrival model, which assumes that the dwell time of a bus is linear in headway, is built to probe the effect of scheduled headway, and the model is simulated by Matlab. The simulation results reveal that the departure intervals and fluctuations affect headway regularity. Longer intervals and less fluctuation mean higher regularity of headway. And, the fluctuation has a more obvious influence on headway regularity than the interval. Controlling the fluctuations of scheduled headway can effectively raise the regularity of headway and improve the level of public transport service.

Effects of Water-permeability Plastic Film Mulching plus Bunch Planting on Root and Yield of Foxtail Millet

Effects of water-permeability plastic film plus bunch planting on root growth and development and yield of foxtail millet were studied by randomized block design. The results showed that water-permeability plastic film mulching plus bunch planting had a significant promoting effect on root growth and development and yield of foxtail millet. Compared with the CK, the total root length, total surface area, total root volume and number of. root tips increased by 51.30%, 47.89%, 48.39% and 41.63%, respectively. The yield increased by 48.57%, and there was significant positive correlation between root length, total surface area, total volume, number of root tips and dry matter weight of roots with yield. Developed roots are the main reason for the yield increasing effect of water-permeability plastic film mulching plus bunch planting.

Statistical optimization of adsorption processes for removal of 2,4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches

The adsorption capacity of activated carbon produced from oil palm empty fruit bunches through removal of 2,4-dichlorophenol from aqueous solution was carried out in the laboratory. The activated carbon was produced by thermal activation of activation time with 30 min at 800℃. The adsorption process conditions were determined with the statistical optimization followed by central composite design. A developed polynomial model for operating conditions of adsorption process indicated that the optimum conditions for maximum adsorption of phenolic compound were： agitation rate of 100 r/min, contact time of 8 h, initial adsorbate concentration of 250 mg/L and pH 4. Adsorption isotherms were conducted to evaluate biosorption process. Langmuir isotherm was more favorable （R^2=0.93） for removal of 2,4-dichlorophenol by the activated carbon rather than Freundlich isotherm （R^2=0.88）.

Electron Acceleration in the Cone-shaped Extra-intense Stationary Laser Field

A technique of electron acceleration in the cone shaped stationary laser field is proposed. An electron acceleration in this laser is studied, which shows that there is no electron bunching but there exists electron capture in this laser field.

适合宽带无线网络的Bunched系统

Bunched系统由多个远端天线单元(RAU)和一个中心单元(CU)构成,可以有效地提高WiMAX等未来宽带无线网络的频谱利用率,能很好地解决热点地区覆盖问题。介绍了Bunched系统的结构,描述了其系统的特点和优点,分析了需要解决的关键技术。