The Correlation Coefficient of Hesitancy Fuzzy Graphs in Decision Making

The hesitancy fuzzy graphs(HFGs),an extension of fuzzy graphs,are useful tools for dealing with ambiguity and uncertainty in issues involving decision-making(DM).This research implements a correlation coefficient measure(CCM)to assess the strength of the association between HFGs in this article since CCMs have a high capacity to process and interpret data.The CCM that is proposed between the HFGs has better qualities than the existing ones.It lowers restrictions on the hesitant fuzzy elements’length and may be used to establish whether the HFGs are connected negatively or favorably.Additionally,a CCMbased attribute DM approach is built into a hesitant fuzzy environment.This article suggests the use of weighted correlation coefficient measures(WCCMs)using the CCM concept to quantify the correlation between two HFGs.The decisionmaking problems of hesitancy fuzzy preference relations(HFPRs)are considered.This research proposes a new technique for assessing the relative weights of experts based on the uncertainty of HFPRs and the correlation coefficient degree of each HFPR.This paper determines the ranking order of all alternatives and the best one by using the CCMs between each option and the ideal choice.In the meantime,the appropriate example is given to demonstrate the viability of the new strategies.

Stochastic resonance based on correlation coefficient in parallel array of threshold devices

The phenomenon of stochastic resonance （SR） based on the correlation coefficient in a parallel array of threshold devices is discussed. For four representative noises： the Gaussian noise, the uniform noise, the Laplace noise and the Cauchy noise, when the signal is subthreshold, noise can improve the correlation coefficient and SR exists. The efficacy of SR can be significantly enhanced and the maximum of the correlation coefficient can dramatically approach to one as the number of the threshold devices in the parallel array increases. Two theorems are presented to prove that SR has some robustness to noises in the parallel array. These results further extend the applicability of SR in signal processing.

The Physical Significance of the Synthetic Running Correlation Coefficient and Its Applications in Oceanic and Atmospheric Studies

In order to study the temporal variations of correlations between two time series,a running correlation coefficient(RCC)could be used.An RCC is calculated for a given time window,and the window is then moved sequentially through time.The current calculation method for RCCs is based on the general definition of the Pearson product-moment correlation coefficient,calculated with the data within the time window,which we call the local running correlation coefficient(LRCC).The LRCC is calculated via the two anomalies corresponding to the two local means,meanwhile,the local means also vary.It is cleared up that the LRCC reflects only the correlation between the two anomalies within the time window but fails to exhibit the contributions of the two varying means.To address this problem,two unchanged means obtained from all available data are adopted to calculate an RCC,which is called the synthetic running correlation coefficient(SRCC).When the anomaly variations are dominant,the two RCCs are similar.However,when the variations of the means are dominant,the difference between the two RCCs becomes obvious.The SRCC reflects the correlations of both the anomaly variations and the variations of the means.Therefore,the SRCCs from different time points are intercomparable.A criterion for the superiority of the RCC algorithm is that the average value of the RCC should be close to the global correlation coefficient calculated using all data.The SRCC always meets this criterion,while the LRCC sometimes fails.Therefore,the SRCC is better than the LRCC for running correlations.We suggest using the SRCC to calculate the RCCs.

Mathematical Proof of the Synthetic Running Correlation Coefficient and Its Ability to Reflect Temporal Variations in Correlation

The running correlation coefficient(RCC)is useful for capturing temporal variations in correlations between two time series.The local running correlation coefficient(LRCC)is a widely used algorithm that directly applies the Pearson correlation to a time window.A new algorithm called synthetic running correlation coefficient(SRCC)was proposed in 2018 and proven to be rea-sonable and usable;however,this algorithm lacks a theoretical demonstration.In this paper,SRCC is proven theoretically.RCC is only meaningful when its values at different times can be compared.First,the global means are proven to be the unique standard quantities for comparison.SRCC is the only RCC that satisfies the comparability criterion.The relationship between LRCC and SRCC is derived using statistical methods,and SRCC is obtained by adding a constraint condition to the LRCC algorithm.Dividing the temporal fluctuations into high-and low-frequency signals reveals that LRCC only reflects the correlation of high-frequency signals;by contrast,SRCC reflects the correlations of high-and low-frequency signals simultaneously.Therefore,SRCC is the ap-propriate method for calculating RCCs.

Edge detection in the potential field using the correlation coefficients of multidirectional standard deviations

Most edge-detection methods rely on calculating gradient derivatives of the potential field, a process that is easily affected by noise and is therefore of low stability. We propose a new edge-detection method named correlation coefficient of multidirectional standard deviations（CCMS） that is solely based on statistics. First, we prove the reliability of the proposed method using a single model and then a combination of models. The proposed method is evaluated by comparing the results with those obtained by other edge-detection methods. The CCMS method offers outstanding recognition, retains the sharpness of details, and has low sensitivity to noise. We also applied the CCMS method to Bouguer anomaly data of a potash deposit in Laos. The applicability of the CCMS method is shown by comparing the inferred tectonic framework to that inferred from remote sensing（RS） data.

Improvement of Similarity Measure： Pearson Product-Moment Correlation Coefficient

Aim To study the reason of the insensitiveness of Pearson product-momentcorrelation coefficient as a similarity measure and the method to improve its sensitivity. MethodsExperimental and simulated data sets were used. Results The distribution range of the data setsinfluences the sensitivity of Pearson product-moment correlation coefficient. Weighted Pearsonproduct-moment correlation coefficient is more sensitive when the range of the data set is large.Conclusion Weighted Pearson product-moment correlation coefficient is necessary when the range ofthe data set is large.

Narrowband time delay estimation based on correlation coefficient

The problems of time delay estimation of narrowband signals are presented. The disadvantages of the existing algorithms are analyzed, and a new narrowband time delay estimating algorithm based on correlation coefficient is proposed. The original time delay information is transfered into the delay between the autocorrelation and cross-correlation function, and the precise estimating result by wave-comparison is given. The algorithm proposed here is also compared with other algorithms and its advantages over other algorithms are proved. The theoretical analysis and simulation show the effectiveness of the proposed algorithm.

Reliability Sensitivity-based Correlation Coefficient Calculation in Structural Reliability Analysis

The correlation coefficients of random variables of mechanical structures are generally chosen with experience or even ignored,which cannot actually reflect the effects of parameter uncertainties on reliability.To discuss the selection problem of the correlation coefficients from the reliability-based sensitivity point of view,the theory principle of the problem is established based on the results of the reliability sensitivity,and the criterion of correlation among random variables is shown.The values of the correlation coefficients are obtained according to the proposed principle and the reliability sensitivity problem is discussed.Numerical studies have shown the following results：（1） If the sensitivity value of correlation coefficient ρ is less than（at what magnitude 0.000 01）,then the correlation could be ignored,which could simplify the procedure without introducing additional error.（2） However,as the difference between ρs,that is the most sensitive to the reliability,and ρR,that is with the smallest reliability,is less than 0.001,ρs is suggested to model the dependency of random variables.This could ensure the robust quality of system without the loss of safety requirement.（3） In the case of ｜Eabs｜ρ0.001 and also ｜Erel｜ρ0.001,ρR should be employed to quantify the correlation among random variables in order to ensure the accuracy of reliability analysis.Application of the proposed approach could provide a practical routine for mechanical design and manufactory to study the reliability and reliability-based sensitivity of basic design variables in mechanical reliability analysis and design.

LARGE DEVIATION FOR THE EMPIRICAL CORRELATION COEFFICIENT OF TWO GAUSSIAN RANDOM VARIABLES

In this article, the author obtains the large deviation principles for the empirical correlation coefficient of two Gaussian random variables X and Y. Especially, when considering two independent Gaussian random variables X, Y with the means EX, EY （both known）, wherein the author gives two kinds of different proofs and gets the same results.

Correlation Degree and Correlation Coefficient of Multi-Output Functions

We present definitions of the correlation degree and correlation coefficient of multi-output functions. Two relationships about the correlation degree of multi-output functions are proved. One is between the correlation degree and independency, the other is between the correlation degree and balance. Especially the paper discusses the correlation degree of affine multioutput functions. We demonstrate properties of the correlation coefficient of multi-output functions. One is the value range of the correlation coefficient, one is the relationship between the correlation coefficient and independency, and another is the sufficient and necessary condition that two multi-output functions are equivalent to each other.

A Correlation Coefficient Approach for Evaluation of Stiffness Degradation of Beams Under Moving Load

This paper presents a new approach using correlation and cross-correlation coefficients to evaluate the stiffness degradation of beams under moving load.The theoretical study of identifying defects by vibration methods showed that the traditional methods derived from the vibration measurement data have not met the needs of the actual issues.We show that the correlation coefficients allow us to evaluate the degree and the effectiveness of the defects on beams.At the same time,the cross-correlation model is the basis for determining the relative position of defects.The results of this study are experimentally conducted to confirm the relationship between the correlation coefficients and the existence of the defects.In particular,the manuscript shows that the sensitivity of the correlation coefficients and cross-correlation is much higher than the parameters such as changes in stiffness(EJ)and natural frequency values(Δf).This study suggests using the above parameters to evaluate the stiffness degradation of beams by vibration measurement data in practice.

Weighted Parameterized Correlation Coefficients of Indeterminacy Fuzzy Multisets and Their Multicriteria Group Decision Making Method with Different Decision Risks

Real-life data introduce noise,uncertainty,and imprecision to statistical projects;it is advantageous to consider strategies to overcome these information expressions and processing problems.Neutrosophic(indeterminate)numbers can flexibly and conveniently represent the hybrid information of the partial determinacy and partial indeterminacy in an indeterminate setting,while a fuzzy multiset is a vital mathematical tool in the expression and processing of multi-valued fuzzy information with different and/or same fuzzy values.If neutrosophic numbers are introduced into fuzzy sequences in a fuzzy multiset,the introduced neutrosophic number sequences can be constructed as the neutrosophic number multiset or indeterminate fuzzy multiset.Motivated based on the idea,this study first proposes an indeterminate fuzzy multiset,where each element in a universe set can be repeated more than once with the different and/or identical indeterminate membership values.Then,we propose the parameterized correlation coefficients of indeterminate fuzzy multisets based on the de-neutrosophication of transforming indeterminate fuzzy multisets into the parameterized fuzzy multisets by a parameter(the parameterized de-neutrosophication method).Since indeterminate decision-making issues need to be handled by an indeterminate decision-making method,a group decision-making method using the weighted parameterized correlation coefficients of indeterminate fuzzy multisets is developed along with decision makers’different decision risks(small,moderate,and large risks)so as to handle multicriteria group decision-making problems in indeterminate fuzzy multiset setting.Finally,the developed group decision-making approach is used in an example on a selection problem of slope design schemes for an open-pit mine to demonstrate its usability and flexibility in the indeterminate group decision-making problem with indeterminate fuzzy multisets.

Statistical analysis of fracture properties based on particle swarm optimization and Pearson correlation coefficient method

Prediction of reservoir fracture is the key to explore fracture-type reservoir. When a shear-wave propagates in anisotropic media containing fracture,it splits into two polarized shear waves: fast shear wave and slow shear wave. The polarization and time delay of the fast and slow shear wave can be used to predict the azimuth and density of fracture. The current identification method of fracture azimuth and fracture density is cross-correlation method. It is assumed that fast and slow shear waves were symmetrical wavelets after completely separating,and use the most similar characteristics of wavelets to identify fracture azimuth and density,but in the experiment the identification is poor in accuracy. Pearson correlation coefficient method is one of the methods for separating the fast wave and slow wave. This method is faster in calculating speed and better in noise immunity and resolution compared with the traditional cross-correlation method. Pearson correlation coefficient method is a non-linear problem,particle swarm optimization( PSO) is a good nonlinear global optimization method which converges fast and is easy to implement. In this study,PSO is combined with the Pearson correlation coefficient method to achieve identifying fracture property and improve the computational efficiency.

ON TESTING THE EQUALITY OF K MULTIPLE AND PARTIAL CORRELATION COEFFICIENTS

Coutsourides (1980) derives an ad hoc nuisance parameter removal test for testing the equality of two multiple correlation coefficients of two independent p variate normal populations, under the assumption that a sample of size n is available from each population. He also extends his ad hoc nuisance parameter removal test to the testing of the equality of two multiple correlation matrices. This paper presents likelihood ratio tests for testing the equality of k multiple correlation coefficients, and also k partial correlation coefficients.

Improvement of a new rotation function for molecular replacement by designing new scoring functions and dynamic correlation coefficient

A previously published new rotation function has been improved by using a dynamic correlation coefficient as well as two new scoring functions of relative entropy and mean-square-residues to make the rotation function more robust and independent of a specific set of weights for scoring and ranking. The previously described new rotation function calculates the rotation function of molecular replacement by matching the search model directly with the Patterson vector map. The signal-to-noise ratio for the correct match was increased by averaging all the matching peaks. Several matching scores were employed to evaluate the goodness of matching. These matching scores were then combined into a single total score by optimizing a set of weights using the linear regression method. It was found that there exists an optimal set of weights that can be applied to the global rotation search and the correct solution can be ranked in the top 100 or less. However, this set of optimal weights in general is dependent on the search models and the crystal structures with different space groups and cell parameters. In this work, we try to solve this problem by designing a dynamic correlation coefficient. It is shown that the dynamic correlation coefficient works for a variety of space groups and cell parameters in the global search of rotation function. We also introduce two new matching scores： relative entropy and mean-square-residues. Last but not least, we discussed a valid method for the optimization of the adjustable parameters for matching vectors.

ASSESSMENT OF LOCAL INFLUENCE FOR GENERALIZED CORRELATION COEFFICIENTS

In this paper, we study local influence analysis for Zhang's generalized correlation coefficients and Hotelling's generalized correlation coefficient by using approach. of local influence analysis suggested by Shi (1991), i.e., generalized influence function (GIF) and generalized Cook distance (GCD). An example is given to illustrate our results.

Decomposition Method of Genetic Correlation Coefficient Based on NC Ⅱ Mating Design

There are different degrees of correlation between crop traits. The phenotypic correlation is decomposed into genetic and environmental correlation in quantitative genetics. In this paper,according to stochastic model of variance and covariance analysis,we calculate different genetic components,bring up a decomposition method of genetic correlation coefficient based on NC II mating design,and use examples to show analytic steps and interpret results.

Theorem of Logarithm Expectation and Its Application to Prove Sample Correlation Coefficient as Unbiased Estimate

In statistical theory, a statistic that is function of sample observations is used to estimate distribution parameter. This statistic is called unbiased estimate if its expectation is equal to theoretical parameter. Proving whether or not a statistic is unbiased estimate is very important but this proof may require a lot of efforts when statistic is complicated function. Therefore, this research facilitates this proof by proposing a theorem which states that the expectation of variable x 〉 0 is u if and only if the limit of logarithm expectation of x approaches logarithm of u. In order to make clear of this theorem, the research gives an example of proving correlation coefficient as unbiased estimate by taking advantages of this theorem.

A Simulation Based Comparison of Correlation Coefficients with Regard to Type I Error Rate and Power

In this simulation study, five correlation coefficients, namely, Pearson, Spearman, Kendal Tau, Permutation-based, and Winsorized were compared in terms of Type I error rate and power under different scenarios where the underlying distributions of the variables of interest, sample sizes and correlation patterns were varied. Simulation results showed that the Type I error rate and power of Pearson correlation coefficient were negatively affected by the distribution shapes especially for small sample sizes, which was much more pronounced for Spearman Rank and Kendal Tau correlation coefficients especially when sample sizes were small. In general, Permutation-based and Winsorized correlation coefficients are more robust to distribution shapes and correlation patterns, regardless of sample size. In conclusion, when assumptions of Pearson correlation coefficient are not satisfied, Permutation-based and Winsorized correlation coefficients seem to be better alternatives.

Regression models of Pearson correlation coefficient

We propose two simple regression models of Pearson correlation coefficient of two normal responses or binary responses to assess the effect of covariates of interest.Likelihood-based inference is established to estimate the regression coefficients,upon which bootstrap-based method is used to test the significance of covariates of interest.Simulation studies show the effectiveness of the method in terms of type-I error control,power performance in moderate sample size and robustness with respect to model mis-specification.We illustrate the application of the proposed method to some real data concerning health measurements.