The tensile properties and fatigue behavior of an Al-Zn-Mg-Cu alloy were investigated by performing tensile tests and fatigue crack propagation （FCP） tests. The tensile results show that lower aging temperature modi...The tensile properties and fatigue behavior of an Al-Zn-Mg-Cu alloy were investigated by performing tensile tests and fatigue crack propagation （FCP） tests. The tensile results show that lower aging temperature modified retrogression and re-aging （RRA） process enhances the elongation, but reduces the strength of the alloy, as compared to conventional RRA process which employs peak aging temperature. Both ductility and strength, however, are increased by employing a natural aging prior to re-aging based on the former modified RRA process. Fatigue test results show that both routes reduce FCP rate. Especially, the lower re-aging temperature modified RRA process obtains the lowest FCP rate. Natural aging treatment could enhance the nucleation rate of GP zones. A large amount of GP zones could be cut by dislocations, which is responsible for the highest tensile strength and elongation, as well as lower FCP rate.展开更多
Based on the rotation in the entire block and homogeneous strain model ( REHSM) ,we firstly analyze the motion and deformation features across the southern part of Tancheng- Lujiang fault zone from GPS velocity fields...Based on the rotation in the entire block and homogeneous strain model ( REHSM) ,we firstly analyze the motion and deformation features across the southern part of Tancheng- Lujiang fault zone from GPS velocity fields in period of 1999 ～ 2001,2001 ～ 2004,2004 ～ 2007 and 2007 ～ 2009. The results show a dextral strike-slip feature in the Weifang- Tancheng segment and sinistral strike-slip in the Tancheng-Lujiang segment. And the deformation perpendicular to the Tancheng-Lujiang fault zone alternates between tension and compression in different time-intervals. Then we resolve the relative rigid motion of blocks around Bohai Bay to the Circum-Bohai Sea area by deducting the entire rigid motion of the Circum-Bohai Sea area. We find that the Yanshan-Bohai seismic belt split this area into two parts,the northern part moving NW,and the other SE.展开更多
Al-10.8Zn-2.8Mg-1.9Cu alloy was synthesized by spray atomization and deposition technique. GP zones and age-hardening process in the alloy were investigated using high-resolution electron microscopy （HREM）, selected...Al-10.8Zn-2.8Mg-1.9Cu alloy was synthesized by spray atomization and deposition technique. GP zones and age-hardening process in the alloy were investigated using high-resolution electron microscopy （HREM）, selected area diffraction （SAD）, and differential scanning calorimetry （DSC） analysis. The results indicated that spray deposition process accelerated the aging kinetics of the alloy at an aging temperature of 120℃, thereby reducing the peak aging time to 16 h. GPⅠ and GPⅡ are the two types of zones that are major precipitates for the alloy under peak-aged condition. The precipitation sequence for the alloy is also discussed.展开更多
The effects of under-aging treatment on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy produced by squeeze casting were investigated using optical microscopy(OM),X-ray diffractometry(XRD),scanning e...The effects of under-aging treatment on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy produced by squeeze casting were investigated using optical microscopy(OM),X-ray diffractometry(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and hardness and tensile testing.The results showed that most of secondary phases were dissolved intoα(Al)matrix while no significant grain growth happened under the condition of solution treatment at 470°C for 4 h.Due to the strengthening effect of GP zones,for alloys treated by under-aging process,the increase of aging time and aging temperature improved the ultimate tensile strength(UTS)and yield strength(YS),but decreased the elongation(δ)to some extent.By utilizing appropriate aging time and temperature,the best combination of strength and ductility could be obtained to fulfill the design requirements of automobile components.展开更多
The AlMgSi wires with and without Ce were aged at temperatures 18, 30, 40, 50, 70, 100, 120 and 140 degrees C respectively after quenching from solid solution states, and their resistivity was measured in situ during ...The AlMgSi wires with and without Ce were aged at temperatures 18, 30, 40, 50, 70, 100, 120 and 140 degrees C respectively after quenching from solid solution states, and their resistivity was measured in situ during aging. The results showed that the resistance of the samples aged at the temperatures given above except the one at 140 degrees C was increasing with aging time. The rate of increase was large initially and then reduced gradually. The relative resistance increases Delta R/R(0) of the samples with Ce were smaller than that without Ce under similar conditions. The result assumed to be due to reduction of the dispersion of G. P. zone by Ce.展开更多
基金Project(51171209)supported by the National Natural Science Foundation of ChinaProject(2012CB619506)supported by the National Basic Research Program of Chinasupported by the 2011 Program of Nonferrous Metals and Materials,China
文摘The tensile properties and fatigue behavior of an Al-Zn-Mg-Cu alloy were investigated by performing tensile tests and fatigue crack propagation （FCP） tests. The tensile results show that lower aging temperature modified retrogression and re-aging （RRA） process enhances the elongation, but reduces the strength of the alloy, as compared to conventional RRA process which employs peak aging temperature. Both ductility and strength, however, are increased by employing a natural aging prior to re-aging based on the former modified RRA process. Fatigue test results show that both routes reduce FCP rate. Especially, the lower re-aging temperature modified RRA process obtains the lowest FCP rate. Natural aging treatment could enhance the nucleation rate of GP zones. A large amount of GP zones could be cut by dislocations, which is responsible for the highest tensile strength and elongation, as well as lower FCP rate.
基金sponsored by the Basic Research Project of Institute of Earthquake Science,China Earthquake Administration ( 2011IES010102)
文摘Based on the rotation in the entire block and homogeneous strain model ( REHSM) ,we firstly analyze the motion and deformation features across the southern part of Tancheng- Lujiang fault zone from GPS velocity fields in period of 1999 ～ 2001,2001 ～ 2004,2004 ～ 2007 and 2007 ～ 2009. The results show a dextral strike-slip feature in the Weifang- Tancheng segment and sinistral strike-slip in the Tancheng-Lujiang segment. And the deformation perpendicular to the Tancheng-Lujiang fault zone alternates between tension and compression in different time-intervals. Then we resolve the relative rigid motion of blocks around Bohai Bay to the Circum-Bohai Sea area by deducting the entire rigid motion of the Circum-Bohai Sea area. We find that the Yanshan-Bohai seismic belt split this area into two parts,the northern part moving NW,and the other SE.
基金This work was financially supported by the Major State Basic Research Development Program of China (No. 2005CB623704).
文摘Al-10.8Zn-2.8Mg-1.9Cu alloy was synthesized by spray atomization and deposition technique. GP zones and age-hardening process in the alloy were investigated using high-resolution electron microscopy （HREM）, selected area diffraction （SAD）, and differential scanning calorimetry （DSC） analysis. The results indicated that spray deposition process accelerated the aging kinetics of the alloy at an aging temperature of 120℃, thereby reducing the peak aging time to 16 h. GPⅠ and GPⅡ are the two types of zones that are major precipitates for the alloy under peak-aged condition. The precipitation sequence for the alloy is also discussed.
基金Project(2017ZX04006001)supported by the National Science and Technology Major Project of China
文摘The effects of under-aging treatment on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy produced by squeeze casting were investigated using optical microscopy(OM),X-ray diffractometry(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and hardness and tensile testing.The results showed that most of secondary phases were dissolved intoα(Al)matrix while no significant grain growth happened under the condition of solution treatment at 470°C for 4 h.Due to the strengthening effect of GP zones,for alloys treated by under-aging process,the increase of aging time and aging temperature improved the ultimate tensile strength(UTS)and yield strength(YS),but decreased the elongation(δ)to some extent.By utilizing appropriate aging time and temperature,the best combination of strength and ductility could be obtained to fulfill the design requirements of automobile components.
文摘The AlMgSi wires with and without Ce were aged at temperatures 18, 30, 40, 50, 70, 100, 120 and 140 degrees C respectively after quenching from solid solution states, and their resistivity was measured in situ during aging. The results showed that the resistance of the samples aged at the temperatures given above except the one at 140 degrees C was increasing with aging time. The rate of increase was large initially and then reduced gradually. The relative resistance increases Delta R/R(0) of the samples with Ce were smaller than that without Ce under similar conditions. The result assumed to be due to reduction of the dispersion of G. P. zone by Ce.
