Harmonic balance simulation of the influence of component uniformity and reliability on the performance of a Josephson traveling wave parametric amplifier

A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A typical JTWPA consists of thousands of Josephson junctions connected in series to form a transmission line and hundreds of shunt LC resonators periodically loaded along the line for phase matching.Because the variation of these capacitors and inductors can be detrimental to their high-frequency characteristics,the fabrication of a JTWPA typically necessitates precise processing equipment.To guide the fabrication process and further improve the design for manufacturability,it is necessary to understand how each electronic component affects the amplifier.In this paper,we use the harmonic balance method to conduct a comprehensive study on the impact of nonuniformity and fabrication yield of the electronic components on the performance of a JTWPA.The results provide insightful and scientific guidance for device design and fabrication processes.

Harmonic balance method with alternating frequency/time domain technique for nonlinear dynamical system with fractional exponential

Comparisons of the common methods for obtaining the periodic responses show that the harmonic balance method with alternating frequency/time （HB-AFT） do- main technique has some advantages in dealing with nonlinear problems of fractional exponential models. By the HB-AFT method, a rigid rotor supported by ball bearings with nonlinearity of Hertz contact and ball passage vibrations is considered. With the aid of the Floquet theory, the movement characteristics of interval stability are deeply studied. Besides, a simple strategy to determine the monodromy matrix is proposed for the stability analysis.

Nonlinear vibration analysis of a circular composite plate harvester via harmonic balance

Alumped parameter transversevibration model of a composite plate harvester is analyzed via harmonic balance approaches. The harvester is mainly composed of a piezoelectriccircular composite clamped by two steel rings and a proof mass on the plate.The lumped parameter model is a 1.5 degree-of-freedom strongly nonlinear system with a higher order polynomial stiffness. Aharmonic balance approach is developed to analyze the system, and the resulting algebraic equations are numerically solved by adopting an arc-length continuation technique. Anincremental harmonic balance approach is also developedfor the lumped parameter model. The two approaches yieldthe same results.The amplitude-frequency responses produced by the harmonic balance approach are validated by the numericalintegrations and the experimental data. The investigation reveals that there coexist hardening and softening characteristics in the amplitude-frequency response curves under sufficiently large excitations. The harvester with thecoexistenceof hardening and softening nonlinearitiescan outperform not only linear energy harvesters but also typical hardening nonlinear energy harvesters.

Improving convergence of incremental harmonic balance method using homotopy analysis method

We have deduced incremental harmonic balance an iteration scheme in the （IHB） method using the harmonic balance plus the Newton-Raphson method. Since the convergence of the iteration is dependent upon the initial values in the iteration, the convergent region is greatly restricted for some cases. In this contribution, in order to enlarge the convergent region of the IHB method, we constructed the zeroth-order deformation equation using the homotopy analysis method, in which the IHB method is employed to solve the deformation equation with an embedding parameter as the active increment. Taking the Duffing and the van der Pol equations as examples, we obtained the highly accurate solutions. Importantly, the presented approach renders a convenient way to control and adjust the convergence.

Period-doubling bifurcation in two-stage power factor correction converters using the method of incremental harmonic balance and Floquet theory

In this paper, period-doubling bifurcation in a two-stage power factor correction converter is analyzed by using the method of incremental harmonic balance （IHB） and Floquet theory. A two-stage power factor correction converter typically employs a cascade configuration of a pre-regulator boost power factor correction converter with average current mode control to achieve a near unity power factor and a tightly regulated post-regulator DC-DC Buck converter with voltage feedback control to regulate the output voltage. Based on the assumption that the tightly regulated postregulator DC-DC Buck converter is represented as a constant power sink and some other assumptions, the simplified model of the two-stage power factor correction converter is derived and its approximate periodic solution is calculated by the method of IHB. And then, the stability of the system is investigated by using Floquet theory and the stable boundaries are presented on the selected parameter spaces. Finally, some experimental results are given to confirm the effectiveness of the theoretical analysis.

Nonlinear vibration analysis of a circular micro-plate in two-sided NEMS/MEMS capacitive system by using harmonic balance method

In this study, forced nonlinear vibration of a circular micro-plate under two-sided electrostatic, two-sided Casimir and external harmonic forces is investigated analytically. For this purpose, at first, von Karman plate theory including geometrical nonlinearity is used to obtain the deflection of the micro-plate. Galerkin decomposition method is then employed, and nonlinear ordinary differential equations (ODEs) of motion are determined. A harmonic balance method (HBM) is applied to equations and analytical relation for nonlineaT frequency response (F-R) curves are derived for two categories (including and neglecting Casimir force) separately. The analytical results for three cases:(1) semi-linear vibration;(2) weakly nonlinear vibration;(3) highly non linear vibration, are validated by comparing with the numerical solutio ns. After validation, the effects of the voltage and Casimir force on the natural frequency of two-sided capacitor system are investigated. It is shown that by assuming Casimir force in small gap distances, reduction of the natural frequency is considerable. The influences of the applied voltage, damping, micro-plate thickness and Casimir force on the frequency response curves have been presented too. The results of this study can be useful for modeling circular parallel-plates in nano /microelectromechanical transducers such as microphones and pressure sensors.

INCREMENTAL HARMONIC BALANCE METHOD FOR AIRFOIL FLUTTER WITH MULTIPLE STRONG NONLINEARITIES

The incremental harmonic balance method was extended to analyze the flutter of systems with multiple structural strong nonlinearities. The strongly nonlinear cubic plunging and pitching stiffness terms were considered in the flutter equations of two-dimensional airfoil. First, the equations were transferred into matrix form, then the vibration process was divided into the persistent incremental processes of vibration moments. And the expression of their solutions could be obtained by using a certain amplitude as control parameter in the harmonic balance process, and then the bifurcation, limit cycle flutter phenomena and the number of harmonic terms were analyzed. Finally, numerical results calculated by the Runge-Kutta method were given to verify the results obtained by the proposed procedure. It has been shown that the incremental harmonic method is effective and precise in the analysis of strongly nonlinear flutter with multiple structural nonlinearities.

Primary resonance of fractional-order Duffing–van der Pol oscillator by harmonic balance method

The dynamical properties of fractional-order Duffing–van der Pol oscillator are studied, and the amplitude–frequency response equation of primary resonance is obtained by the harmonic balance method. The stability condition for steady-state solution is obtained based on Lyapunov theory. The comparison of the approximate analytical results with the numerical results is fulfilled, and the approximations obtained are in good agreement with the numerical solutions. The bifurcations of primary resonance for system parameters are analyzed. The results show that the harmonic balance method is effective and convenient for solving this problem, and it provides a reference for the dynamical analysis of similar nonlinear systems.

Modeling, Steady-State Analysis of a SEPIC dc-dc Converter Based on Switching Function and Harmonic Balance Technique

The paper presents modeling approach of a Single Ended Primary Inductance Converter (SEPIC) system. The complete model derivation of the SEPIC converter system has been presented in different modes of operation. Steady state and small signal analysis was carried out on the converter dynamic equations using the method of Harmonic balance Technique. The steady state variables and their respective ripple quantities obtained were plotted against duty ratio D. The results obtained for a supply input voltage of 60 volts to the converter at a duty ratio of D = 0.8 , compares well with simulation results.

Analysing chaos in fractional-order systems with the harmonic balance method

In this paper, the fractional-order Genesio-Tesi system showing chaotic behaviours is introduced, and the corresponding one in an integer-order form is studied intensively. Based on the harmonic balance principle, which is widely used in the frequency analysis of nonlinear control systems, a theoretical approach is used to investigate the conditions of system parameters under which this fractional-order system can give rise to a chaotic attractor. Finally, the numerical simulation is used to verify the validity of the theoretical results.

A novel adaptive harmonic balance method with an asymptotic harmonic selection

The harmonic balance method(HBM)is one of the most widely used methods in solving nonlinear vibration problems,and its accuracy and computational efficiency largely depend on the number of the harmonics selected.The adaptive harmonic balance(AHB)method is an improved HBM method.This paper presents a modified AHB method with the asymptotic harmonic selection(AHS)procedure.This new harmonic selection procedure selects harmonics from the frequency spectra of nonlinear terms instead of estimating the contribution of each harmonic to the whole nonlinear response,by which the additional calculation is avoided.A modified continuation method is proposed to deal with the variable size of nonlinear algebraic equations at different values of path parameters,and then all solution branches of the amplitude-frequency response are obtained.Numerical experiments are carried out to verify the performance of the AHB-AHS method.Five typical nonlinear dynamic equations with different types of nonlinearities and excitations are chosen as the illustrative examples.Compared with the classical HBM and Runge-Kutta methods,the proposed AHB-AHS method is of higher accuracy and better convergence.The AHB-AHS method proposed in this paper has the potential to investigate the nonlinear vibrations of complex high-dimensional nonlinear systems.

Harmonic Balance Methods:A Review and Recent Developments

The harmonic balance(HB)method is one of the most commonly used methods for solving periodic solutions of both weakly and strongly nonlinear dynamical systems.However,it is confined to low-order approximations due to complex symbolic operations.Many variants have been developed to improve the HB method,among which the time domain HB-like methods are regarded as crucial improvements because of their fast computation and simple derivation.So far,there are two problems remaining to be addressed.i)A dozen of different versions of HB-like methods,in frequency domain or time domain or in hybrid,have been developed;unfortunately,misclassification pervades among them due to the unclear borderlines of different methods.ii)The time domain HB-like methods suffer from non-physical solutions,which have been shown to be caused by aliasing(mixture of the high-order into the low-order harmonics).Although a series of dealiasing techniques have been developed over the past two decades,the mechanism of aliasing and the final solution to dealiasing are still not well known to the academic community.This paper aims to provide a comprehensive review of the development of HB-like methods and enunciate their principal differences.In particular,the time domain methods are emphasized with the famous aliasing phenomenon clearly addressed.

Period-One Rotating Solutions of Horizontally Excited Pendulum Based on Iterative Harmonic Balance

In this study, the iterative harmonic balance method was used to develop analytical solutions of period-one rotations of a pendulum driven horizontally by harmonic excitations. The performance of the method was evaluated by two criteria, one based on the system energy error and the other based on the global residual error. As a comparison, analytical solutions based on the multi-scale method were also considered. Numerical solutions obtained from the Dormand-Prince method (ODE45 in MATLAB&#169) were used as the baseline for evaluation. It was found that under lower-level excitations, the multi-scale method performed better than the iterative method. At higher-level excitations, however, the performance of the iterative method was noticeably more accurate.

Improvement of Harmonic Balance Using Jacobian Elliptic Functions

We propose a method for finding approximate analytic solutions to autonomous single degree-of-freedom nonlinear oscillator equations. It consists of the harmonic balance with linearization in which Jacobian elliptic functions are used instead of circular trigonometric functions. We show that a simple change of independent variable followed by a careful choice of the form of anharmonic solution enable to obtain highly accurate approximate solutions. In particular our examples show that the proposed method is as easy to use as existing harmonic balance based methods and yet provides substantially greater accuracy.

AN IMPROVEMENT TO THE HARMONIC-BALANCE TECHNIQUE FOR ANALYZING NONLINEAR CIRCUITS

In this paper,an improved method,which is based on the harmonic-balance tech-nique,for speeding up the convergence iteration procedure is presented.As an example,it isapplied to the nonlinear analysis of microwave mixer,in which a simple time domain to fre-quency domain transformation technique for the mixer diode is firstly introduced.The use of thistechnique saves computing time dramatically.And the analyzed results are in good agreementwith the results published.The improved method can also be extended to the CAA of nonlinearcircuits with multi-devices.

三次非线性粘性阻尼双线性滞迟振动系统 IHB 分析方法

研究了增量谐波平衡法（ＩＨＢ）在求解三次非线性粘性阻尼双线性滞迟振动系统简谐激励下稳态周期响应中的应用，并通过四阶ＲｕｎｇｅＫｕｔａ数值积分对近似迭代方法的精确性进行了验证，最后根据Ｆｌｏｑｕｅｔ理论讨论了周期解的稳定性．

脉动流激励下输流管道的参数共振IHB方法研究

应用增量谐波平衡法(IHB法)研究脉动流激励下两端铰支输流管的参数共振。对无量纲的运动微分方程采用两振型Galerkin展开式离散化后,用IHB法分析了管道一阶1/2次谐波参数共振,并得到了幅-频响应曲线。将其与数值模拟解以及平均法结果比较发现,IHB法所得到的响应比平均法更加精确。研究同时表明:高阶模态对管道的一阶参数共振影响很小。

一类二阶迟滞非线性控制系统简谐激励响应的IHB分析方法

针对一类迟滞特性和线性特性可分离的二阶迟滞非线性控制系统,用Backlash神经网络模型逼近系统迟滞非线性部分,建立动力学模型,采用增量谐波平衡法(IHB法)求解该类含比例控制器的迟滞非线性闭环控制系统在简谐激励下的稳态周期解,并引入Floquet理论分析系统周期解的稳定性。通过Runge-Kutta数值积分法对近似迭代法的精确性进行了验证,最后分析了控制器参数对系统性能的影响。

基于IHBM的汽车非线性悬架系统定量研究

分析了汽车悬架系统和轮胎的非线性弹簧力和阻尼力,建立了二自由度汽车非线性垂向振动系统的动力学模型.结合增量谐波平衡方法(incremental harmonic balance method,IHBM),对该系统的动力学行为进行定量研究.推导其增量谐波平衡过程,研究增量谐波平衡法的迭代计算过程,采用几个不同的谐波次数,计算系统的近似周期解,确定周期解的稳定性;同时,以路面激励圆频率为参数进行了跟踪计算,得到系统主共振时的幅频响应特性.近似解的计算结果与数值计算结果的对比表明,增量谐波平衡方法的精度可灵活控制,且收敛速度快,结果可靠,是汽车强非线性动力学行为研究的有效方法.

IHB方法在含强非线性摩擦力失谐叶盘系统响应特性研究中的应用

针对目前谐波平衡法分析高维非线性动力学系统存在求解困难等问题,文中基于增量谐波平衡法(incremental harmonic balance method,IHB法)能将高维非线性方程组转化为线性方程组进行求解的优点,将其推广应用到含强非线性干摩擦力失谐叶盘系统振动响应特性研究中,成功避开谐波平衡法必须求解非线性方程组的问题。研究表明,推广后的IHB法能较好地解决含强非线性摩擦力失谐叶盘系统响应求解的诸多问题,并且运用该方法成功发现含非线性摩擦阻尼的谐调叶盘系统也可能产生振动能量局部化现象。