The Probability Density Function Related to Shallow Cumulus Entrainment Rate and Its Influencing Factors in a Large-Eddy Simulation

The process of entrainment-mixing between cumulus clouds and the ambient air is important for the development of cumulus clouds.Accurately obtaining the entrainment rate(λ)is particularly important for its parameterization within the overall cumulus parameterization scheme.In this study,an improved bulk-plume method is proposed by solving the equations of two conserved variables simultaneously to calculateλof cumulus clouds in a large-eddy simulation.The results demonstrate that the improved bulk-plume method is more reliable than the traditional bulk-plume method,becauseλ,as calculated from the improved method,falls within the range ofλvalues obtained from the traditional method using different conserved variables.The probability density functions ofλfor all data,different times,and different heights can be well-fitted by a log-normal distribution,which supports the assumed stochastic entrainment process in previous studies.Further analysis demonstrate that the relationship betweenλand the vertical velocity is better than other thermodynamic/dynamical properties;thus,the vertical velocity is recommended as the primary influencing factor for the parameterization ofλin the future.The results of this study enhance the theoretical understanding ofλand its influencing factors and shed new light on the development ofλparameterization.

LARGE-EDDY SIMULATION OF TWO-PHASE REACTING FLOW IN MODEL COMBUSTOR

The gas-droplet two-phase reacting flow in a model combustor with the V-gutter flame holder is studied by an Eulerian-Lagrangian large-eddy simulation (LES) approach. The k-equation subgrid-scale model is used to simulate the subgrid eddy viscosity, and the eddy-break-up (EBU) combustion subgrid-scale model is used to determine the chemical reaction rate. A two-step turbulent combustion subgrid-scale model is employed for calculating carbon monoxide CO concentration, and the NO subgrid-scale pollutant formation model for the evaluation of the rate of NO formation. The heat flux model is applied to the prediction of radiant heat transfer. The gas phase is solved with the SIMPLE algorithm and a hybrid scheme in the staggered grid system. The liquid phase equations are solved in a Lagrangian frame in reference of the particle-source-in-cell (PSIC) algorithm. From simulation results, the exchange of mass, moment and energy between gas and particle fields for the reacting flow in the afterburner with a V-gutter flame holder can be obtained. By the comparison of experimental and simulation results, profile temperature and pollutant of the outlet are quite in agreement with experimental data. Results show that the LES approach for predicting the two-phase instantaneous reacting flow and pollutant emissions in the afterburner is feasible.

Evaluation of Subgrid-scale Models in Large-eddy Simulations of Turbulent Flow in a Centrifugal Pump Impeller

The current research of large eddy simulation （LES） of turbulent flow in pumps mainly concentrates in applying conventional subgrid-scale （SGS） model to simulate turbulent flow, which aims at obtaining the flow field in pump. The selection of SGS model is usually not considered seriously, so the accuracy and efficiency of the simulation cannot be ensured. Three SGS models including Smagorinsky-Lilly model, dynamic Smagorinsky model and dynamic mixed model are comparably studied by using the commercial CFD code Fluent combined with its user define function. The simulations are performed for the turbulent flow in a centrifugal pump impeller. The simulation results indicate that the mean flows predicted by the three SGS models agree well with the experimental data obtained from the test that detailed measurements of the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller performed using particle image velocimetry （PIV） and laser Doppler velocimetry （LDV）. The comparable results show that dynamic mixed model gives the most accurate results for mean flow in the centrifugal pump impeller. The SGS stress of dynamic mixed model is decompose into the scale similar part and the eddy viscous part. The scale similar part of SGS stress plays a significant role in high curvature regions, such as the leading edge and training edge of pump blade. It is also found that the dynamic mixed model is more adaptive to compute turbulence in the pump impeller. The research results presented is useful to improve the computational accuracy and efficiency of LES for centrifugal pumps, and provide important reference for carrying out simulation in similar fluid machineries.

Scaling law of resolved-scale isotropic turbulence and its application in large-eddy simulation

Eddy-damping quasinormal Markovian （EDQNM） theory is employed to calculate the resolved-scale spectrum and transfer spectrum, based on which we investigate the resolved-scale scaling law. Results show that the scaling law of the resolved-scale turbulence, which is affected by several factors, is far from that of the full-scale turbulence and should be corrected. These results are then applied to an existing subgrid model to improve its performance. A series of simulations are performed to verify the necessity of a fixed scaling law in the subgrid modeling.

Parameterization of Sheared Entrainment in a Well-Developed CBL.Part I:Evaluation of the Scheme through Large-Eddy Simulations

The entrainment flux ratio Ae and the inversion layer （IL） thickness are two key parameters in a mixed layer model. Ae is defined as the ratio of the entrainment heat flux at the mixed layer top to the surface heat flux. The IL is the layer between the mixed layer and the free atmosphere. In this study, a parameterization of Ae is derived from the TKE budget in the first- order model for a well-developed CBL under the condition of linearly sheared geostrophic velocity with a zero value at the surface. It is also appropriate for a CBL under the condition of geostrophic velocity remaining constant with height. LESs are conducted under the above two conditions to determine the coefficients in the parameterization scheme. Results suggest that about 43% of the shear-produced TKE in the IL is available for entrainment, while the shear-produced TKE in the mixed layer and surface layer have little effect on entrainment. Based on this scheme, a new scale of convective turbulence velocity is proposed and applied to parameterize the IL thickness, The LES outputs for the CBLs under the condition of linearly sheared geostrophic velocity with a non-zero surface value are used to verify the performance of the parameterization scheme. It is found that the parameterized Ae and IL thickness agree well with the LES outputs.

Large-eddy simulation of circular cylinder flow at subcritical Reynolds number:Turbulent wake and sound radiation

The flows past a number 3900 are simulated circular cylinder at Reynolds using large-eddy simulation （LES） and the far-field sound is calculated from the LES results. A low dissipation energy-conserving finite volume scheme is used to discretize the incompressible Navier- Stokes equations. The dynamic global coefficient version of the Vreman＇s subgrid scale （SGS） model is used to com- pute the sub-grid stresses. Curie＇s integral of Lighthill＇s acoustic analogy is used to extract the sound radiated from the cylinder. The profiles of mean velocity and turbulent fluctua- tions obtained are consistent with the previous experimental and computational results. The sound radiation at far field exhibits the characteristic of a dipole and directivity. The sound spectra display the -5/3 power law. It is shown that Vreman＇s SGS model in company with dynamic procedure is suitable for LES of turbulence generated noise.

Recent improvements of actuator line-large-eddy simulation method for wind turbine wakes

In a large wind farm,the wakes of upstream and downstream wind turbines can interfere with each other,affecting the overall power output of the wind farm.To further improve the numerical accuracy of the turbine wake dynamics under atmosphere turbulence,this work proposes some improvements to the actuator line-large-eddy simulation(AL-LES)method.Based on the dynamic k-equation large-eddy simulation(LES),this method uses a precursor method to generate atmospheric inflow turbulence,models the tower and nacelle wakes,and improves the body force projection method based on an anisotropic Gaussian distribution function.For these three improvements,three wind tunnel experiments are used to validate the numerical accuracy of this method.The results show that the numerical results calculated in the far-wake region can reflect the characteristics of typical onshore and offshore wind conditions compared with the experimental results.After modeling the tower and nacelle wakes,the wake velocity distribution is consistent with the experimental result.The radial migration velocity of the tip vortex calculated by the improved blade body force distribution model is 0.32 m/s,which is about 6%different from the experimental value and improves the prediction accuracy of the tip vortex radial movement.The method proposed in this paper is very helpful for wind turbine wake dynamic analysis and wind farm power prediction.

Large-eddy Simulation of Fluid Flow and Heat Transfer in a Mixing Tee Junction

The temperature fluctuation caused by thermal striping phenomena of hot and cold fluids mixing results in cyclical thermal stress fatigue failure of the pipe wall. Mean temperature difference between hot and cold fluids was often used as thermal load in previous analysis of thermal fatigue failure, thereby the influences of the amplitude and frequency of temperature fluctuation on thermal fatigue failure were neglected. Based on the mechanism of flow and heat transfer which induces thermal fatigue, the turbulent mixing of hot and cold water in a tee junction is simulated with FLUENT platform by using the Large-eddy simulation（LES） turbulent flow model with the sub-grid scale（SGS） model of Smagorinsky-Lilly（SL） to capture the amplitude and frequency of temperature fluctuation. In a simulation case, hot water with temperature of 343.48 K and velocity of 0.15 m/s enters the horizontal main duct with the side length of 100 mm, while cold water with temperature of 296.78 K and velocity of 0.3 m/s enters the vertical branch duct with the side length of 50 mm. The numerical results show that the mean and fluctuating temperatures are in good agreement with the previous experimental data, which describes numerical simulation with high reliability and accuracy; the power spectrum density（PSD） on top wall is higher than that on bottom wall（as the frequency less than 1 Hz）, while the PSD on bottom wall is relatively higher than that on top wall （as the frequency of 1-10Hz）. The temperature fluctuations in full mixing region of the tee junction can be accurately captured by LES and can provide the theoretical basis for the thermal stress and thermal fatigue analyses.

Large-Eddy Simulation of Wind Turbine Wake and Aerodynamic Performance with Actuator Line Method

A hybrid method is presented to numerically investigate the wind turbine aerodynamic characteristics.The wind turbine blade is replaced by an actuator line model.Turbulence is treated using a dynamic one-equation subgrid-scale model in large eddy simulation.Detailed information on the basic characteristics of the wind turbine wake is obtained and discussed.The rotor aerodynamic performance agrees well with the measurements.The actuator line method large-eddy simulation(ALM-LES)technique demonstrates its high potential in providing accurate load prediction and high resolution of turbulent fluctuations in the wind turbine wakes and the interactions within a feasible cost.

Large-eddy simulation of fluid mixing in tee with sintered porous medium

Mixing processes of hot and cold fluids in a tee with and without sin- tered copper spheres are simulated by FLUENT using the large-eddy simulation （LES） turbulent flow model and the sub-grid scale （SGS） Smagorinsky-Lilly （SL） model with buoyancy. Comparisons of numerical results of the two cases with and without sintered copper spheres show that the porous medium significantly reduces velocity and temper- ature fluctuations because the porous medium can effectively restrict the fluid flow and enhance heat transfer. The porous medium obviously increases the pressure drop in the main duct. The porous medium reduces the power spectrum density （PSD） of tempera- ture fluctuations in the frequency range from 1 Hz to 10 Hz.

Large-eddy Simulation of Bubble-Liquid Confined Jets

The Large-eddy simulation (LES) with two-way coupling is used to study bubble-liquid two-phase confined multiple jets discharged into a 2D channel.The LES results reveal the large-eddy vortex structures of both liquid flow and bubble motion,the shear-generated and bubble-induced liquid turbulence,and indicate much stronger bubble fluctuation than that of the liquid,the enhancement of liquid turbulence by bubbles.Both shear and bubble-liquid interaction are important for the liquid turbulence generation in the case studied.

Advances in Large-eddy Simulation of Two-phase Combustion (I) LES of Spray Combustion

Spray combustion is widely used in power, transportation, chemical and metallurgical, iron and steel making, aeronautical and astronautical engineering. In recent years, large-eddy simulation (LES) becomes more and more attractive, because it can give the instantaneous flow and flame structures, and may give more accurate statistical results than the Reynolds averaged Navier-Stokes (RANS) modeling. In this paper, the present status of the studies on LES of spray combustion is reviewed, and the future research needs are discussed.

Large-eddy simulation of the influence of a wavy lower boundary on the turbulence kinetic energy budget redistribution

Oceanic turbulence plays an important role in coastal flow. However, as the effect of an uneven lower boundary on the adjacent turbulence is still not well understood, we explore the mechanics of nearshore turbulence with a turbulence-resolving numerical model known as a large-eddy-simulation model for an idealized scenario in a coastal region for which the lower boundary is a solid sinusoidal wave. The numerical simulation demonstrates how the mechanical energy of the current is transferred into local turbulence mixing, and shows the changes in turbulent intensity over the continuous phase change of the lower topography. The strongest turbulent kinetic energy is concentrated above the trough of the wavy surface. The turbulence mixing is mainly generated by the shear forces; the magnitude of shear production has a local maximum over the crest of the seabed topography, and there is an asymmetry in the shear production between the leeward and windward slopes. The numerical results are consistent with results from laboratory experiments. Our analysis provides an important insight into the mechanism of turbulent kinetic energy production and development.

A study of a supersonic capsule/rigid disk-gap-band parachute system using large-eddy simulation

The aerodynamic performances and flow features of the capsule/rigid disk-gap-band(DGB)parachute system from the Mach number 1.8 to 2.2 are studied.We use the adaptive mesh refinement(AMR),the hybrid tuned center-difference and weighted essentially non-oscillatory(TCD-WENO)scheme,and the large-eddy simulation(LES)with the stretched-vortex subgrid model.The simulations reproduce complex interaction of the flow structures,including turbulent wakes and bow shocks,as well as bow shocks and expansion waves.The results show that the calculated aerodynamic drag coefficient agrees well with the previou simulation.Both the aerodynamic drag coefficient and the aerodynamic drag oscillation of the parachute system decrease with the increase of the initial Mach number of the fluid.It is found that the position and angle of the bow shock ahead of the canopy change as the Mach number increases,which makes the flow inside the canopy and the turbulent wake behind the canopy more complex and unstable.

Large-eddy Simulation of Ethanol Spray-Air Combustion and Its Experimental Validation

Large-eddy simulation of spray combustion is under its rapid development.Different combustion models were used by different investigators.However,these models are less validated by detailed experimental data.In this paper,large-eddy simulation(LES)of ethanol spray-air combustion was made using an Eulerian-Lagrangian approach,a subgrid-scale kinetic energy stress model,and a filtered finite-rate combustion model,neglecting the sub-grid scale reaction rate.The simulation results are compared with experimental dada in the literature and validated in detail.The LES obtained statistically averaged gas temperature is in much better agreement with the experimental results than Reynolds averaged(RANS)modeling using the most complex probability density function(PDF)equation combustion model.The instantaneous LES results show the coherent structures of the shear region near the high-temperature flame zone and the fuel vapor concentration map,indicating that the droplets are concentrated in this shear region.The instantaneous temperature,oxygen and carbon dioxide concentration maps show the close interaction between the coherent structures and the combustion reaction.

Error of large-eddy simulation in the wall pressure fluctuation of a turbulent channel flow

We analyze the error of large-eddy simulation(LES)in wall pressure fluctuation of a turbulent channel flow.To separate different sources of the error,we conduct both direct numerical simulations(DNS)and LES,and apply an explicit filter on DNS data to obtain filtered DNS(FDNS)data.The error of LES is consequently decomposed into two parts:The first part is the error of FDNS with respect to DNS,which quantifies the influence of the filter operation.The second part is the difference between LES and FDNS induced by the error of LES in velocity field.By comparing the root-mean-square value and the wavenumber-frequency spectrum of the wall pressure fluctuation,it is found that the inaccuracy of the velocity fluctuations is the dominant source that induces the error of LES in the wall pressure fluctuation.The present study provides a basis on future LES studies of the wall pressure fluctuation.

Large-eddy simulations of a forced homogeneous isotropic turbulence with polymer additives

Large-eddy simulations （LES） based on the temporal approximate deconvolution model were performed for a forced homogeneous isotropic turbulence （FHIT） with polymer additives at moderate Taylor Reynolds number. Finitely extensible nonlinear elastic in the Peterlin approximation model was adopted as the constitutive equation for the filtered conformation tensor of the polymer molecules. The LES results were verified through comparisons with the direct numerical simulation results. Using the LES database of the FHIT in the Newtonian fluid and the polymer solution flows, the polymer effects on some important parameters such as strain, vorticity, drag reduction, and so forth were studied. By extracting the vortex structures and exploring the flatness factor through a high-order correlation function of velocity derivative and wavelet analysis, it can be found that the small-scale vortex structures and small-scale intermittency in the FHIT are all inhibited due to the existence of the polymers. The extended self-similarity scaling law in the polymer solution flow shows no apparent difference from that in the Newtonian fluid flow at the currently simulated ranges of Reynolds and Weissenberg numbers.

Wall-modeling for large-eddy simulation of flows around an axisymmetric body using the diffuse-interface immersed boundary method

A novel method is proposed to combine the wall-modeled large-eddy simulation(LES) with the diffuse-interface direct-forcing immersed boundary(IB) method.The new developments in this method include:(i) the momentum equation is integrated along the wall-normal direction to link the tangential component of the effective body force for the IB method to the wall shear stress predicted by the wall model;(ii) a set of Lagrangian points near the wall are introduced to compute the normal component of the effective body force for the IB method by reconstructing the normal component of the velocity. This novel method will be a classical direct-forcing IB method if the grid is fine enough to resolve the flow near the wall. The method is used to simulate the flows around the DARPA SUBOFF model. The results obtained are well comparable to the measured experimental data and wall-resolved LES results.

LARGE-EDDY SIMULATION OF STRATIFIED CHANNEL FLOW

An investigation of large-eddy simulation(LES) for turbulent channel flow with buoyancy effects was performed by solving the resolved incompressible Navier-Stokes equations under the Boussinesq approximation. The Smagorinsky eddy-viscosity model and Yoshizawa eddy-viscosity model were used to describe the unresolved subgrid scale (SGS) fluctuations respectively After some numerical testing, the latter was further simplified so that if can be used in the dynamic model closure. A LES code was developed for parallel computations by using the parallel technique, and aas run on the Dawn-1000 parallel computer. To demonstrate the viability and accuracy of the code, our results are compared with and found in good agreement with available LES results.

Wall-resolved large-eddy simulation of turbulent channel flows with rough walls

Turbulent flows over rough surfaces widely exist in nature and industry.Investigating its mechanism is of theoretical and practical significance.In this work we simulate the turbulent channel flow with rough walls using large-eddy simulation with rough elements resolved using the curvilinear immersed boundary method and compare the results obtained in this work with those in the paper by Yuan and Piomelli(J.Fluid Mech.,vol.760,pp.R1,2014),where the volume of fluid method was employed for modeling rough elements.The mean streamwise velocity profiles predicted by the two methods agree well with each other.Differences in Reynolds stresses and dispersive stresses are observed,which are attributed to the different approaches in dealing with the complex geometry of the rough surface.