Downregulation of Serum PTEN Expression in Mercury-Exposed Population and PI3K/AKT Pathway-Induced Inflammation

Objective This study investigated the impact of occupational mercury(Hg) exposure on human gene transcription and expression, and its potential biological mechanisms.Methods Differentially expressed genes related to Hg exposure were identified and validated using gene expression microarray analysis and extended validation. Hg-exposed cell models and PTEN lowexpression models were established in vitro using 293T cells. PTEN gene expression was assessed using qRT-PCR, and Western blotting was used to measure PTEN, AKT, and PI3K protein levels. IL-6 expression was determined by ELISA.Results Combined findings from gene expression microarray analysis, bioinformatics, and population expansion validation indicated significant downregulation of the PTEN gene in the high-concentration Hg exposure group. In the Hg-exposed cell model(25 and 10 μmol/L), a significant decrease in PTEN expression was observed, accompanied by a significant increase in PI3K, AKT, and IL-6 expression.Similarly, a low-expression cell model demonstrated that PTEN gene knockdown led to a significant decrease in PTEN protein expression and a substantial increase in PI3K, AKT, and IL-6 levels.Conclusion This is the first study to report that Hg exposure downregulates the PTEN gene, activates the PI3K/AKT regulatory pathway, and increases the expression of inflammatory factors, ultimately resulting in kidney inflammation.

Multi-Pollutant Formation and Control in Pressurized Oxy-Combustion:SO_(x),NO_(x),Particulate Matter,and Mercury

Oxy-combustion is a promising carbon-capture technology,but atmospheric-pressure oxy-combustion has a relatively low net efficiency,limiting its application in power plants.In pressurized oxycombustion(POC),the boiler,air separation unit,flue gas recirculation unit,and CO_(2)purification and compression unit are all operated at elevated pressure;this makes the process more efficient,with many advantages over atmospheric pressure,such as low NO_(x)emissions,a smaller boiler size,and more.POC is also more promising for industrial application and has attracted widespread research interest in recent years.It can produce high-pressure CO_(2)with a purity of approximately 95%,which can be used directly for enhanced oil recovery or geo-sequestration.However,the pollutant emissions must meet the standards for carbon capture,storage,and utilization.Because of the high oxygen and moisture concentrations in POC,the formation of acids via the oxidation and solution of SO_(x)and NO_(x)can be increased,causing the corrosion of pipelines and equipment.Furthermore,particulate matter(PM)and mercury emissions can harm the environment and human health.The main distinction between pressurized and atmospheric-pressure oxy-combustion is the former’s elevated pressure;thus,the effect of this pressure on the pollutants emitted from POC—including SO_(x),NO_(x),PM,and mercury—must be understood,and effective control methodologies must be incorporated to control the formation of these pollutants.This paper reviews recent advances in research on SO_(x),NO_(x),PM,and mercury formation and control in POC systems that can aid in pollutant control in such systems.

Formation and growth of nanophase iron particles on the surface of Mercury revealed by experimental study

Space weathering is a primary factor in altering the composition and spectral characteristics of surface materials on airless planets.However,current research on space weathering focuses mainly on the Moon and certain types of asteroids.In particular,the impacts of meteoroids and micrometeoroids,radiation from solar wind/solar flares/cosmic rays,and thermal fatigue due to temperature variations are being studied.Space weathering produces various transformation products such as melted glass,amorphous layers,iron particles,vesicles,and solar wind water.These in turn lead to soil maturation,changes in visible and near-infrared reflectance spectra(weakening of characteristic absorption peaks,decreased reflectance,increased near-infrared slope),and alterations in magnetism(related to small iron particles),collectively termed the“lunar model”of space weathering transformation.Compared to the Moon and asteroids,Mercury has unique spatial environmental characteristics,including more intense meteoroid impacts and solar thermal radiation,as well as a weaker particle radiation environment due to the global distribution of its magnetic field.Therefore,the lunar model of space weathering may not apply to Mercury.Previous studies have extensively explored the eff ects of micrometeoroid impacts.Hence,this work focuses on the eff ects of solar-wind particle radiation in global magnetic-field distribution and on the weathering transformation of surface materials on Mercury under prolonged intense solar irradiation.Through the utilization of highvalence state,heavy ion implantation,and vacuum heating simulation experiments,this paper primarily investigates the weathering transformation characteristics of the major mineral components such as anorthite,pyroxene,and olivine on Mercury’s surface and compares them to the weathering transformation model of the Moon.The experimental results indicate that ion implantation at room temperature is insufficient to generate np-Fe^(0)directly but can facilitate its formation,while prolonged exposure to solar thermal radiation on Mercury’s surface can lead directly to the formation of np-Fe^(0).Therefore,intense solar thermal radiation is a crucial component of the unique space weathering transformation process on Mercury’s surface.

Tb^(3+)-nucleic acid probe-based label-free and rapid detection of mercury pollution in food

Mercury is a threatening pollutant in food,herein,we developed a Tb^(3+)-nucleic acid probe-based label-free assay for mix-and-read,rapid detection of mercury pollution.The assay utilized the feature of light-up fluorescence of terbium ions(Tb^(3+))via binding with single-strand DNA.Mercury ion,Hg^(2+)induced thymine(T)-rich DNA strand to form a double-strand structure(T-Hg^(2+)-T),thus leading to fluorescence reduction.Based on the principle,Hg^(2+)can be quantified based on the fluorescence of Tb^(3+),the limit of detection was 0.0689μmol/L and the linear range was 0.1-6.0μmol/L.Due to the specificity of T-Hg^(2+)-T artificial base pair,the assay could distinguish Hg^(2+)from other metal ions.The recovery rate was ranged in 98.71%-101.34%for detecting mercury pollution in three food samples.The assay is low-cost,separation-free and mix-to-read,thus was a competitive tool for detection of mercury pollution to ensure food safety.

A monolithic integrated medium wave Mercury Cadmium Telluride polarimetric focal plane array

A medium wave(MW)640×512(25μm)Mercury Cadmium Telluride(HgCdTe)polarimetric focal plane array(FPA)was demonstrated.The micro-polarizer array(MPA)has been carefully designed in terms of line grating structure optimization and crosstalk suppression.A monolithic fabrication process with low damage was explored,which was verified to be compatible well with HgCdTe devices.After monolithic integration of MPA,NETD<9.5 mK was still maintained.Furthermore,to figure out the underlying mechanism that dominat⁃ed the extinction ratio(ER),specialized MPA layouts were designed,and the crosstalk was experimentally vali⁃dated as the major source that impacted ER.By expanding opaque regions at pixel edges to 4μm,crosstalk rates from adjacent pixels could be effectively reduced to approximately 2%,and promising ERs ranging from 17.32 to 27.41 were implemented.

Key issues on magnetic reconnection at Mercury

Magnetic reconnection processes and their impact on planetary magnetospheric dynamics exhibit significant differences due to differences in upstream solar wind conditions and internal planetary environments.Current understanding of reconnection phenomena at Mercury is rooted in the MESSENGER mission.However,direct detection of reconnection remains rare.Here,we aim to assess the limitations of MESSENGER in detecting reconnection in Mercury’s space and to discuss key issues of reconnection that will be addressed by BepiColombo,including the dynamics of magnetic flux ropes,particle acceleration,density asymmetric reconnection,IMF-driven near-tail structures,and potential modes of magnetospheric convection.

Statistical study of magnetic holes in the upstream region of Mercury’s bow shock

Magnetic holes are magnetic depression structures that exist widely in many plasma environments.The magnetic holes with durations of>1 s in the solar wind at Mercury’s orbit have drawn much attention,but the properties of the magnetic holes with shorter durations are still unclear.Here,we investigate the magnetic holes with durations of 0.1-100 s in the upstream region of Mercury’s bow shock based on observations by the MESSENGER(MErcury Surface,Space ENvironment,GEochemistry,and Ranging)spacecraft.They can be divided into two groups according to the distribution of their duration:small-duration magnetic holes(SDMHs,<0.6 s)and large-duration magnetic holes(LDMHs,>0.6 s).The duration of each group approximately obeys a log-normal distribution with a median of~0.25 s and 3 s,respectively.Approximately 1.7%(32.6%)of the SDMHs(LDMHs)reduce the magnetic field strength by more than 50%.For both groups,some structures have a linear or quasi-linear polarization,whereas others have an elliptical polarization.The magnetic hole events in both groups tend to have a higher rate of occurrence when the interplanetary magnetic field strength is weaker.Their occurrence rates are also affected by Mercury’s foreshock,which can increase(decrease)the occurrence rate of the SDMHs(LDMHs).This finding suggests that Mercury’s foreshock might be one source of the SDMHs and that the foreshock can destroy some LDMHs.These observations suggest that a new group of magnetic holes with durations of<0.6 s exist in the upstream region of Mercury’s bow shock.

Estimation of unfrozen water content of saturated sandstones using nuclear magnetic resonance, mercury intrusion porosimetry, and ultrasonic tests

The unfrozenwater content(UWC)is a crucial parameter that affects the strength and thermal properties of rocks in relation to engineering construction and geological disasters in cold regions.In this study,three different methods were employed to test and estimate the UWC of saturated sandstones,including nuclear magnetic resonance(NMR),mercury intrusion porosimetry(MIP),and ultrasonic methods.The NMR method enabled the direct measurement of the UWC of sandstones using the free induction decay(FID).The MIP method was used to analyze the pore structures of sandstones,with the UWC subsequently calculated based on pore ice crystallization.Therefore,the MIP test constituted an indirect measurement method.Furthermore,a correlation was established between the P-wave velocity and the UWC of these sandstones based on the mixture theory,which could be employed to estimate the UWC as an empirical method.All methods demonstrated that the UWC initially exhibited a rapid decrease from 0C to5C and then generally became constant beyond20C.However,these test methods had different characteristics.The NMR method was used to directly and accurately calculate the UWC in the laboratory.However,the cost and complexity of NMR equipment have precluded its use in the field.The UWC can be effectively estimated by the MIP test,but the estimation accuracy is influenced by the ice crystallization process and the pore size distribution.The P-wave velocity has been demonstrated to be a straightforward and practical empirical parameter and was utilized to estimate the UWC based on the mixture theory.This method may be more suitable in the field.All methods confirmed the existence of a hysteresis phenomenon in the freezing-thawing process.The average hysteresis coefficient was approximately 0.538,thus validating the GibbseThomson equation.This study not only presents alternative methodologies for estimating the UWC of saturated sandstones but also contribute to our understanding of the freezing-thawing process of pore water.

Rational Synthesis of Crystalline Covalent Triazine Framework with Methylthio Pendant Arms for Efficient Mercury(Ⅱ)Adsorption

The interest in curtailing environmental pollution issues through physical separation processes has inspired an extensive search for novel nanoporous materials with exceptional adsorption capabilities.Covalent triazine frameworks(CTFs),emerged as a class of crystalline covalent organic frameworks(COFs),have been widely examined for various separation applications,owing to their large porosity,high stability,and rich nitrogen(N)doping.The development of CTFs for efficient adsorption of mercury(Ⅱ)(Hg^(2+))is of great importance for the field,whereas it is rarely attempted,on account of limited synthetic strategies and unknown structural-property relations of conventional CTFs derived from ionothermal approaches.Herein,we report rational synthesis of a crystalline CTF with methylthio pendant arms for efficient removal of Hg^(2+)with an exceptional capacity of 751 mg·g^(-1),ranking at the top among previously-reported adsorbents.This work may open up new possibility in the synthesis of COFs for various separations.

Physiological Mechanism of Exogenous Selenium in Alleviating Mercury Stress on Pakchoi(Brassica campestris L.)

The objective of this study was to explain the physiological mechanisms through which Na_(2)SeO_(3) mitigates the growth and developmental inhibition of pakchoi under HgCl_(2)stress.The results showed that treatment with HgCl_(2)(40 mg L^(−1))led to reduced biomass,dwarfing,root shortening,and root tip necrosis in pakchoi.Compared to control(CK),the activities of superoxide dismutase(SOD)and peroxidase(POD)in Hg treatment increased,and the content of malondialdehyde(MDA)also dramatically increased,which negatively impacted the growth of pakchoi.Low concentrations of Na_(2)SeO_(3)(0.2 mg L^(−1))significantly increased the content of soluble sugars compared with control,while chlorophyll,soluble proteins,free amino acids,and vitamin C had no significant changes.The results of the mixed treatments with HgCl_(2)and Na_(2)SeO_(3) suggested that selenium may be able to reduce the toxicity of mercury in pakchoi.The biomass,plant height,root length,chlorophyll content,soluble protein,other physiological indicators,and proline showed significant increases compared with the HgCl_(2)treatment.Additionally,the MDA content and mercury accumulation in pakchoi decreased.Our results revealed the antagonistic effects of selenium and mercury in pakchoi.Thus,a theoretical basis for studying pakchoi’s mercuryexcreted and selenium-rich cultivation technology was provided.

Mercury Levels Assessment in the Population of Aby and Frambo Villages in the Vinicity of Aby Lagoon in Côte d’Ivoire (West Africa)

The Minamata Convention in the aim to protect human life and the environment, seeks to reduce mercury (Hg) by monitoring it concentrations in the environment. Artisanal and Small-scale Gold Mining (ASGM) has been identified as the most important anthropogenic source of human exposure to Hg. In this context, the main goal of this study was to assess the level of mercury in hair of two (2) populations living along two lagoons respectively Aby and Tendo, in Ivory Coast. To reach this goal, hair samples of 138 residents were collected and analyzed by using Cold Vapor Atomic Fluorescence Spectrophotometry (CV-AFS) technique for mercury concentration. Results showed that for the entire population the Hg mean was 2.34 μg/g. Also, they were ranged between 0.15 to 8.53 μg/g and presented substantial differences amongst the villages. In Aby village, we observed the highest Hg concentrations (Mean = 2.62 μg/g). Our findings showed that almost the entire sample group (82%) exceed the USEPA recommended limit, furthermore 56% of them exceed the normal level of WHO and 2% of the respondent has the unhealthy levels of mercury (≥6 μg Hg/g) of hair by WHO standards. Gender differences in hair mercury varies greatly among reports. Lower levels in women’s hair compared to men were reported in the both village. Considering age, the lowest concentrations were observed with children. However, when we take in account the age groups, data suggested that the most exposed sub-population of [18-29] years old is from Aby village in opposite at Frambo village, the same case those who were ≥ 40 years old. It’s convenient to note that, the proportion of Mercury levels would not to be neglected among studied population especially with the resident from Aby village. So, some measures need to be taken at the political level to control mercury contamination.

Feasibility Evaluation of Using Biochar-based Permeable Reactive Barrier for the Remediation of Mercury and Arsenic Composite Polluted Water Bodies

This study employed a modified biochar material to construct a permeable reactive barrier(PRB)for the treatment of water bodies polluted with mercury and arsenic.The experimental results demonstrated that the addition of goethite-modified biochar significantly enhanced the remediation efficiency of As(III),achieving a maximum removal rate of 100%.Conversely,pure biochar exhibited high efficiency in the removal of Hg(II),with a maximum removal rate approaching 100%.Furthermore,the pH level of the water significantly influenced the adsorption efficiency of heavy metal ions,with the optimal removal performance observed at a pH of 6.0.The PRB system demonstrated excellent removal rates under low concentrations of heavy metals.However,as the concentration increased,the remediation efficiency exhibited a slight decrease.In summary,the findings of this study provide compelling evidence for the use of modified biochar in the construction of PRBs for the remediation of mercury and arsenic-polluted water bodies.Furthermore,the study reveals the mechanism by which pH and heavy metal concentration influence remediation efficiency.

Mercury应用于辅助无机化学的教学研究

无机化学是化学领域的一个重要分支,同时也是各大高校化学类专业的一门专业基础课程。价层电子对互斥理论是无机化学教学的重中之重,是学好后续元素知识的基础,教学中存在概念抽象,二维结构图难以动态展示分子的三维结构等缺点。本文以NO^(-)_(3)、SF_(4)、PCl^(-)_(6)为例,通过Mercury软件将这三个物质进行动态展示,将理论与实验相结合,深入的叙述了这些化合物分子结构、键长、键角等的参数信息。将微观结构宏观化,抽象的化学理论形象化,将静态的二维分子结构进行三维动态展示,解决教学过程中的难点,不断提高教学效率。

Experimental studies on gas-phase mercury oxidation removal and denitration of coal combustion with NH_4 Br addition

In order to remove gas-phase mercury and NOx from flue gas, experimental studies on flue gas mercury oxidation removal and denitration of Guizhou anthracite combustion with NH4Br addition were carried out. The influence of NH4Br addition on the ignition temperature and combustion characteristics was studied using a thermogravimetric analyzer. The effects of the NHaBr addition amount on gas-phase mercury oxidation and removal were investigated in a bench scale of 6 kW fluidized bed combustor （FBC）. Mercury concentrations in flue gas were determined by the Ontario hydro method （OHM） and the mercury mass balance was obtained. Results show that the NH4Br addition has little influence on the ignition temperature of Guizhou anthracite. With the mercury mass balance of 95.47%, the proportion of particulate mercury Hg^p, gaseous mercury Hg^0 and Hg^2＋ are 75.28%, 11.60% and 13. 12%, respectively, as raw coal combustion. The high particulate mercury Hg^p in flue gas is caused by the high unburned carbon content in fly ash. When the NH4Br addition amount increases from 0 to 0. 3%, the concentration of gaseous Hg^0 and Hg^2＋ in flue gas decreases continuously, leading to the Hg^p increase accordingly. The oxidation rate of Hg^0 is positively correlated to the Br addition amount. It demonstrates that coal combustion with NH4Br addition can promote Hg^0 oxidation and removal. NOx concentration in flue gas exhibits a descending trend with the NHaBr addition and the removal rate reaches 17.31% with the addition amount of 0.3%. Adding NH4Br to coal also plays a synergistic role in denitration.

Release of Mercury from Intertidal Sediment to Atmosphere in Summer and Winter

The release of mercury from intertidal sediment to atmosphere was studied based on the simulated experiment. The experiment samples were collected from the Haibo Estuary (S1) and the Licun Estuary (S2) of the Jiaozhou Bay in China,which are seriously polluted with mercury. The results show that the mercury in sediment releases rapidly to atmosphere under solar radiation. After 8 hours of solar radiation,mercury concentrations decrease from 5.62 μg/g and 2.92 μg/g to 2.34 μg/g and 1.39 μg/g in S1 and S2 sediments respectively in summer,and decrease from 5.62 μg/g and 2.92 μg/g to 4.58 μg/g and 2.13 μg/g respectively in winter. The mercury species in the sediment change markedly under solar radiation. The concentrations of mercury bound to organic matter decrease significantly from 2.73 μg/g to 0.31 μg/g in S1 and from 2.07 μg/g to 0.31 μg/g in S2,and the released mercury mainly comes from mercury bound to organic matter. Mercury flux shows distinguishing characteristic of diurnal change,and it increases rapidly in the morning with the rising of solar radiation intensity,but decreases in the afternoon. The mercury flux increases with sediment temperature and solar radiation intensity. The rapid release of mercury in intertidal sediment plays an important role in the regional mercury cycle.

Mercury pollution in the Chongqing part of the Three Gorges Reservoir area and its remediation and prevention

Mercury pollution in the Three Gorges Reservoir area of P.R.China merits special attention.We investigated into the current situation in the Chongqing part of the Reservoir area,identified the pollution sources and proposed some suggestions for the remediation and prevention of mercury pollution in this area.Atmospheric mercury in Chongqing was mainly from coal burning and releases of mercury-containing products such as various types of lights and fever thermometers.Urban drainage in Chongqing and Changshou,and runoffs from the high mercury background area in the lower reaches of the Wujiang River contributed most of the mercury in the water of the Yangtze River.A majority of the blame should be laid on mercury and gold mining in the Wujiang valley.We suggested foresting sloping lands to relieve soil erosion and prevent mercury-bearing soil from running into rivers,educational activities to discourage use of mercury-containing products and improved infrastructure to collect mercury-containing wastes for reducing mercury releases,more facilities for treating wastewater and solid waste to accommodate increased requirements of discharge,and growing selected perennial plants in mercury-contaminated land to absorb the mercury in soil.We also suggested concerted operation of a dedicated water-quality monitoring system,reinforced legislation and an effective administrative mechanism to ensure lasting efforts are invested in curbing mercury releases and restoring mercury contaminated land and water in the Reservoir area.

Determination of Arsenic and Mercury in Soil by Microwave Digestion and Hidride GenerationAtomic Fluorescence Spectrometry

[Objective] The aim was to develop a rapid, simple method for determina- tion of arsenic and mercury in soil samples by atomic fluorescence spectrometry. [Method] The method for determination of As and Hg in soil by combined atomic fluorescence spectrometry and microwave digestion was used. [Result] The concentration curve was linear within the range of 0-80.0μg/L of As and 0-8.0 μg/L of Hg, and the detection limits of As and Hg was 0.036 μg/L and 0.015 μg/L, respectively. The precision for elevenfold determination of As at 40.0 ug/L level and Hg at 4.0μg/L level were 1.1% and 2.2%（RSD）, respectively. Recoveries of 103.0%-106.6% for As and 90.0%-95.0% for Hg were obtained for there soil samples. [Conclusion] The proposed method has the advantages of simple operation, high sensitivity, and high efficiency; it was successfully used for determination of As and Hg in soil samples.

Separation and enrichment of elemental sulfur and mercury from hydrometallurgical zinc residue using sodium sulfide

The separation and enrichment of mercury and the recovery of elemental sulfur from flotation sulfur concentrate in zinc pressure leaching process were carried out by sodium sulfide leaching and carbon dioxide precipitating. The results show that the leaching rate of elemental sulfur is more than 98%, and 98.13% of mercury is enriched in the residue, under the optimized conditions of sodium sulfide concentration 1.5 mol/L, liquid/solid ratio 6：1 and leaching time 30 min at room temperature. In addition, the content of mercury is enriched 5.23 times that in the leaching residue. The elemental sulfur is precipitated from leaching solution under conditions of carbon dioxide flow rate 200 mL/min and blowing time 150 min, while solution is stirred adequately. The recovery efficiency of elemental sulfur reaches 97.67%, and the purity of elemental sulfur is 99.75%, meeting the requirements of industrial first-rate product standard according to the national standard of GB/T 2449-2006 （PRC）.

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices （APCDs） are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction （SCR） and wet flue gas desulftLrization （FGD） systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation affect mercury removal efficiently at coal-fired utilities. The Ontario Hydro Method （OHM） recommended by the U.S. Environmental Protection Agency （EPA） was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor affecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury （Hg^2＋） and more elemental mercury （Hg^0） at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation efficiency reached 71.0%. Therefore, oxidized mercury removal efficiency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%-96.8% of oxidized mercury was controlled, but only 54.9%-68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal efficiency was 95.9%-98.0%, and there was a big difference in the total mercury removal efficiencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.

A novel carbon trap sampling system for coal-fired flue gas mercury measurement

A novel carbon trap sampling system for gas-phase mercury measurement in flue gas is developed, including the high efficient sorbents made of modified biomass cokes and high precision sorbent traps for measuring particle-bound and total vapor-phase mercury in flue gas. A dedusting device is installed to collect fine fly ash for reducing the measurement errors. The thorough comparison test of mercury concentration in flue gas is conducted between the novel sampling system and the Ontario hydro method （OHM） in a 6 kW circulating fluidized bed combustor. Mercury mass balance rates of the OHM range from 95.47% to 104.72%. The mercury breakthrough rates for the second section of the sorbent trap are all below 2%. The relative deviations in the two test cases are in the range of 15. 96% to 17. 56% under different conditions. The verified data suggest that this novel carbon trap sampling system can meet the standards of quality assurance and quality control required by EPA Method 30B and can be applied to the coal-fired flue gas mercury sampling system.