Morphology and valence state evolution of Cu:Unraveling the impact on nitric oxide electroreduction

Ammonia(NH3)serves as a critical component in the fertilizer industry and fume gas denitrification.However,the conventional NH3production process,namely the Haber-Bosch process,leads to considerable energy consumption and waste gas emissions.To address this,electrocatalytic nitric oxide reduction reaction(NORR)has emerged as a promising strategy to bridge NH3consumption to NH3production,harnessing renewable electricity for a sustainable future.Copper(Cu)stands out as a prominent electrocatalyst for NO reduction,given its exceptional NH3yield and selectivity.However,a crucial aspect that remains insufficiently explored is the effects of morphology and valence states of Cu on the NORR performance.In this investigation,we synthesized CuO nanowires(CuO-NF)and Cu nanocubes(Cu-NF)as cathodes through an in situ growth method.Remarkably,CuO-NF exhibited an impressive NH3yield of 0.50±0.02 mg cm^(-2)h^(-1)at-0.6 V vs.reversible hydrogen electrode(RHE)with faradaic efficiency of29,68%±1,35%,surpassing that of Cu-NF(0.17±0.01 mg cm^(-2)h^(-1),16.18%±1.40%).Throughout the electroreduction process,secondary cubes were generated on the CuO-NF surface,preserving their nanosheet cluster morphology,sustained by an abundant supply of subsurface oxygen(s-O)even after an extended duration of 10 h,until s-O depletion ensued.Conversely,Cu-NF exhibited inadequate s-O content,leading to rapid crystal collapse within the same timeframe.The distinctive current-potential relationship,akin to a volcano-type curve,was attributed to distinct NO hydrogenation mechanisms.Further Tafel analysis revealed the exchange current density(i0)and standard heterogeneous rate constant(k0)for CuO-NF,yielding 3.44×10^(-6)A cm^(-2)and 3.77×10^(-6)cm^(-2)s^(-1)when NORR was driven by overpotentials.These findings revealed the potential of CuO-NF for NO reduction and provided insights into the intricate interplay between crystal morphology,valence states,and electrochemical performance.

Responses of growth performance,antioxidant function,small intestinal morphology and mRNA expression of jejunal tight junction protein to dietary iron in yellow-feathered broilers

This study aimed to investigate the dose-effect of iron on growth performance,antioxidant function.intestinal morphology,and mRNA expression of jejunal tight junction protein in 1-to21-d-old yellow-feathered broilers.A total of 7201-d-old yellow-feathered maleb roilers were allocated to 9 treatments with 8 replicate cages of 10 birds per cage.The dietary treatments were consisted of a basal diet(contained 79.6 mg Fe kg^(-1))supplemented with 0,20,40,60,80,160,320,640,and 1,280 mg Fe kg^(-1)in the form of FeSO_(4)·7H_(2)O.Compared with the birds in the control group,birds supplemented with 20mg Fe kg^(-1)had higher average daily gain(ADG)(P<0.0001).Adding 640 and 1,280 mg Fe kg^(-1)significantly decreased ADG(P<0.0001)and average daily feed intake(ADFI)(P<0.0001)compared with supplementation of 20mg Fe kg^(-1).Malondialdehyde(MDA)concentration in plasma and duodenum increased linearly(P<0.0001),but MDA concentration in liver and jejunum increased linearly(P<0.05)or quadratically(P<0.05)with increased dietary Fe concentration.The villus height(VH)in duodenum and jejunum,and the ratio of villus height to crypt depth(V/C)in duodenum decreased linearly(P?0.05)as dietary Feincreased.As dietary Fe increased,the jejunal relative mRNA abundance of claudin-1 decreased linearly(P=0.001),but the jejunal relative mRNA abundance of zona occludens-1(ZO-1)and occludin decreased linearly(P?0.05)or quadratically(P?0.05).Compared with the supplementation of 20 mg Fe kg^(-1),the supplementation of640 mg Fe kg^(-1)or higher increased(P?0.05)MDA concentrations in plasma,duodenum,and jejunum,decreased VH in the duodenum and jejunum,and the addition of 1,280 mg Fe kg^(-1)reduced(P?0.05)the jejunal tight junction protein(claudin-1,ZO-1,occludin)mRNA abundance.In summary,640 mg of supplemental Fe kg^(-1)or greater was associated with decreased growth performance,increased oxidative stress,disrupted intestinal morphology,and reduced mRNA expression of jejunal tight junction protein.

Droplet morphology analysis of drop-on-demand inkjet printing

As an accurate 2D/3D fabrication tool,inkjet printing technology has great potential in preparation of micro electronic devices.The morphology of droplets produced by the inkjet printer has a great impact on the accuracy of deposition.In this study,the drop-on-demand(DoD)inkjet simulation model was established,and the accuracy of the simulation model was verified by corresponding experiments.The simulation result shows that the velocity of the droplet front and tail,as well as the time to disconnect from the nozzle is mainly affected by density(ρ),viscosity(μ)and surface tension(σ)of droplets.When the liquid filament is about to disconnect from the nozzle,the filament length and filament front velocity are found to have a linear correlation withσ/ρμand ln(ρ/(μσ1/2)).

Lineaperpetua gen.nov.:a new diatom genus in the Thalassiosirales supported by morphology and molecular data

Based on a combination of morphology and molecular data of ribosomal DNA genes,a new diatom genus Lineaperpetua gen.nov.Yu,You,Kociolek&Wang is described.The features that help define Lineaperpetua at the level of genus include:a tangentially undulated valve face;continuous cribra areolae on the valve interior consisting of pores arranged as strips;single rimoportula located inside the ring of marginal fultoportulae.Additionally,phylogenetic analysis based on nuclear small subunit(SSU)rDNA sequences and nuclear large subunit(LSU)rDNA gene placed the three strains of L.lacustris in a single,monophyletic clade at a considerable sequence distance from the other genera(Thalassiosira,Conticribra,Planktoniella,Shinodiscus,and other genera)belonging to Thalassiosirales.Despite the similarities with some species of Thalassiosira,Conticribra,and Spicaticribra,the suite of features found in Lineaperpetua differentiate it from these other genera.These molecular data and morphological characters suggest an affinity of the new genus to the Thalassiosiraceae.

The interaction between KIF21A and KANK1 regulates dendritic morphology and synapse plasticity in neurons

Morphological alterations in dendritic spines have been linked to changes in functional communication between neurons that affect learning and memory.Kinesin-4 KIF21A helps organize the microtubule-actin network at the cell cortex by interacting with KANK1;however,whether KIF21A modulates dendritic structure and function in neurons remains unknown.In this study,we found that KIF21A was distributed in a subset of dendritic spines,and that these KIF21A-positive spines were larger and more structurally plastic than KIF21A-negative spines.Furthermore,the interaction between KIF21A and KANK1 was found to be critical for dendritic spine morphogenesis and synaptic plasticity.Knockdown of either KIF21A or KANK1 inhibited dendritic spine morphogenesis and dendritic branching,and these deficits were fully rescued by coexpressing full-length KIF21A or KANK1,but not by proteins with mutations disrupting direct binding between KIF21A and KANK1 or binding between KANK1 and talin1.Knocking down KIF21A in the hippocampus of rats inhibited the amplitudes of long-term potentiation induced by high-frequency stimulation and negatively impacted the animals’cognitive abilities.Taken together,our findings demonstrate the function of KIF21A in modulating spine morphology and provide insight into its role in synaptic function.

A new species of Discostella guiyangensis sp.nov.(Bacillariophyta,Stephanodiscales)from Guiyang,China:morphology and phylogeny

We describe a new species of Discostella from Guiyang based on light and scanning electron microscopic observations,as well as molecular analysis.This species is morphologically distinguished from other species by a relatively smooth and slightly recessed central area with marginal striae of unequal lengths forked near the margin.Marginal fultoportulae and a single rimoportula are situated between every two costae or on the costae.Both morphological characters and the concatenated data of rbc L and SSU rDNA indicate that Discostella guiyangensis is a unique and new species.According to divergence time estimation analysis,Discostella guiyangensis is the oldest species among the Discostella species sequenced currently.In addition,we complement molecular data of Discostella asterocostata and Discostella stelligera.

The dual action of N_(2)on morphology regulation and mass-transfer acceleration of CO_(2)hydrate film

The morphology characteristics of CH_(4),CO_(2),and CO_(2)+N_(2)hydrate film forming on the suspending gas bubbles are studied using microscopic visual method at supercooling conditions from 1.0 to 3.0 K.The hydrate film vertical growth rate and thickness along the planar gas-water interface are measured to study the hydrate formation kinetics and mass transfer process.Adding N_(2)in the gas mixture plays the same role as lowering the supercooling conditions,both retarding the crystal nucleation and growth rates,which results in larger single crystal size and rough hydrate morphology.N_(2)in the gas mixture helps to delay the secondary nucleation on the hydrate film,which is beneficial to maintain the porethroat structure and enhance the mass transfer.The vertical growth rate of hydrate film mainly depends on the supercooling conditions and gas compositions but has weak dependence on the experimental temperature and pressure.Under the same gas composition condition,the final film thickness shows a linear relationship with the supercooling conditions.The mass transfer coefficient of CH_(4)molecules in hydrates ranges from 4.54×10^(-8)to 7.54×10^(-8)mol·cm^(-2)·s^(-1)·MPa^(-1).The maximum mass transfer coefficient for CO_(2)t N_(2)hydrate occurs at the composition of 60%CO_(2)t 40%N_(2),which is 3.98×10^(-8)mol·cm^(-2)·s^(-1)·MPa^(-1).

Flower morphology of Allium(Amaryllidaceae)and its systematic significance

Allium is a complicated genus that includes approximately 1000 species.Although its morphology is well studied,the taxonomic importance of many morphological traits,including floral traits,are poorly understood.Here,we examined and measured the floral characteristics of 87 accessions of 74 Allium taxa(belonging to 30 sections and nine subgenera)from Central to Eastern Asian countries.We then examined the taxonomic relationships between select flower characteristics and a phylogenetic tree based on ITS sequences.Our results confirm that floral morphology provides key taxonomic information to assess species delimitation in Allium.We found that perianth color is an important characteristic within the subg.Melanocrommyum,Polyprason,and Reticulatobulbosa.In subg.Allium,Cepa,and Rhizirideum,significant characteristics include ovary shape,perianth shape,and inner tepal apex.For species in subg.Angunium,the key taxonomic character is ovule number(only one ovule in per locule).In the subg.Allium,Cepa,Polyprason,and Reticulatobulbosa,which belong to the third evolutionary line of Allium,hood-like appendages occur in the ovary,although these do not occur in subg.Rhizirideum.Our results also indicated that the flower morphology of several species in some sections are not clearly distinguished,e.g.,sect.Sacculiferum(subg.Cepa)and sect.Tenuissima(subg.Rhizirideum).This study provides detailed photographs and descriptions of floral characteristics and information on general distributions,habitats,and phenology of the studied taxa.

Leaf Morphology Genes SRL1 and RENL1 Co-Regulate Cellulose Synthesis and Affect Rice Drought Tolerance

The morphological development of rice(Oryza sativa L.)leaves is closely related to plant architecture,physiological activities,and resistance.However,it is unclear whether there is a co-regulatory relationship between the morphological development of leaves and adaptation to drought environment.In this study,a drought-sensitive,roll-enhanced,and narrow-leaf mutant(renl1)was induced from a semi-rolled leaf mutant(srl1)by ethyl methane sulfonate(EMS),which was obtained from Nipponbare(NPB)through EMS.Map-based cloning and functional validation showed that RENL1 encodes a cellulose synthase,allelic to NRL1/OsCLSD4.The RENL1 mutation resulted in reduced vascular bundles,vesicular cells,cellulose,and hemicellulose contents in cell walls,diminishing the water-holding capacity of leaves.In addition,the root system of the renl1 mutant was poorly developed and its ability to scavenge reactive oxygen species(ROS)was decreased,leading to an increase in ROS after drought stress.Meanwhile,genetic results showed that RENL1 and SRL1 synergistically regulated cell wall components.Our results revealed a theoretical basis for further elucidating the molecular regulation mechanism of cellulose on rice drought tolerance,and provided a new genetic resource for enhancing the synergistic regulation network of plant type and stress resistance,thereby realizing simultaneous improvement of multiple traits in rice.

Influences of clean fracturing fluid viscosity and horizontal in-situ stress difference on hydraulic fracture propagation and morphology in coal seam

The viscosity of fracturing fluid and in-situ stress difference are the two important factors that affect the hydraulic fracturing pressure and propagation morphology. In this study, raw coal was used to prepare coal samples for experiments, and clean fracturing fluid samples were prepared using CTAB surfactant. A series of hydraulic fracturing tests were conducted with an in-house developed triaxial hydraulic fracturing simulator and the fracturing process was monitored with an acoustic emission instrument to analyze the influences of fracturing fluid viscosity and horizontal in-situ stress difference on coal fracture propagation. The results show that the number of branched fractures decreased, the fracture pattern became simpler, the fractures width increased obviously, and the distribution of AE event points was concentrated with the increase of the fracturing fluid viscosity or the horizontal in-situ stress difference. The acoustic emission energy decreases with the increase of fracturing fluid viscosity and increases with the increase of horizontal in situ stress difference. The low viscosity clean fracturing fluid has strong elasticity and is easy to be compressed into the tip of fractures, resulting in complex fractures. The high viscosity clean fracturing fluids are the opposite. Our experimental results provide a reference and scientific basis for the design and optimization of field hydraulic fracturing parameters.

On the evolution and formation of discharge morphology in pulsed dielectric barrier discharge

The discharge morphology of pulsed dielectric barrier discharge(PDBD) plays important roles in its applications. Here, we systematically investigated the effects of the voltage amplitude,discharge gap, and O_(2)content on the PDBD morphology, and revealed the possible underlying mechanism of the U-shaped formation. First, the morphological evolution under different conditions was recorded. A unique U-shaped region appears in the middle edge region when the gap is larger than 2 mm, while the entire discharge region remains columnar under a 2 mm gap in He PDBD. The width of the discharge and the U-shaped region increase with the increase in voltage, and decrease with the increase of the gap and O_(2)content. To explain this phenomenon,a two-dimensional symmetric model was developed to simulate the spatiotemporal evolution of different species and calculate the electric thrust. The discharge morphology evolution directly corresponds to the excited-state atomic reduction process. The electric thrust on the charged particles mainly determines the reaction region and strongly influences the U-shaped formation.When the gap is less than 2 mm, the electric thrust is homogeneous throughout the entire region,resulting in a columnar shape. However, when the gap is larger than 2 mm or O_(2)is added, the electric thrust in the edge region becomes greater than that in the middle, leading to the U-shaped formation. Furthermore, in He PDBD, the charged particles generating electric thrust are mainly electrons and helium ions, while in He/O_(2)PDBD those that generate electric thrust at the outer edge of the electrode surface are mainly various oxygen-containing ions.

An Implementation of Multiscale Line Detection and Mathematical Morphology for Efficient and Precise Blood Vessel Segmentation in Fundus Images

Diagnosing various diseases such as glaucoma,age-related macular degeneration,cardiovascular conditions,and diabetic retinopathy involves segmenting retinal blood vessels.The task is particularly challenging when dealing with color fundus images due to issues like non-uniformillumination,low contrast,and variations in vessel appearance,especially in the presence of different pathologies.Furthermore,the speed of the retinal vessel segmentation system is of utmost importance.With the surge of now available big data,the speed of the algorithm becomes increasingly important,carrying almost equivalent weightage to the accuracy of the algorithm.To address these challenges,we present a novel approach for retinal vessel segmentation,leveraging efficient and robust techniques based on multiscale line detection and mathematical morphology.Our algorithm’s performance is evaluated on two publicly available datasets,namely the Digital Retinal Images for Vessel Extraction dataset(DRIVE)and the Structure Analysis of Retina(STARE)dataset.The experimental results demonstrate the effectiveness of our method,withmean accuracy values of 0.9467 forDRIVE and 0.9535 for STARE datasets,aswell as sensitivity values of 0.6952 forDRIVE and 0.6809 for STARE datasets.Notably,our algorithmexhibits competitive performance with state-of-the-art methods.Importantly,it operates at an average speed of 3.73 s per image for DRIVE and 3.75 s for STARE datasets.It is worth noting that these results were achieved using Matlab scripts containing multiple loops.This suggests that the processing time can be further reduced by replacing loops with vectorization.Thus the proposed algorithm can be deployed in real time applications.In summary,our proposed system strikes a fine balance between swift computation and accuracy that is on par with the best available methods in the field.

Engineering fibrillar morphology for highly efficient organic solar cells

The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advance is ascribed to the development of Y-series non-fullerene acceptors(NFAs)[5,6]and polymer donors[7−13],and the refined control of the blend film morphology.

Clinical validation of the early embryo viability assessment system: Analysis for the blastocyst morphology and pregnancy outcomes

Objective:To determine the relationship between the early embryo viability assessment(EEVA)and blastocyst morphological parameters and pregnancy outcomes.Methods:This retrospective cohort study was conducted on 291 intracytoplasmic sperm injection cycles including 2522 embryos with indications of prolonging embryo culture to the blastocyst stage in the Genea embryo review incubator,and 511 single vitrified-warmed blastocyst transfer cycles from January 2020 to June 2023.The EEVA system produced an EEVA score from E1(best)to E5(worse)for the potential of blastocyst formation.Blastocyst morphology was evaluated.The association between the EEVA score and each type of blastocyst morphology,implantation rate,clinical pregnancy,and ongoing pregnancy were assessed using generalized estimating equations.Results:The inner cell mass A(ICM A),trophectoderm A(TE A),blastocoele expansion degree of 3,4,5,6,7 rates were higher with lower the EEVA score.The adjusted odd ratio(aOR)(E5 vs E1)was 0.3 for ICM A,0.174 for TE A and 0.210 for BL3,4,5,6,7(all P<0.001),suggesting a significant association between lower EEVA scores and improved embryo quality.The implantation,clinical pregnancy,and ongoing pregnancy rate were also higher with lower the EEVA score.The aOR of E5 vs E1 was 0.245 for implantation,0.185 for clinical pregnancy and 0.200 for ongoing pregnancy rate(P<0.001).Conclusions:There were associations between blastocyst morphology,pregnancy outcome and EEVA scores.The good blastocyst morphology and pregnancy outcomes are higher with lower the EEVA score.

Recognition of Organizational Morphology of Mesoscale Convective Systems Using Himawari-8 Observations

The onset,evolution,and propagation processes of convective cells can be reflected by the organizational morphology of mesoscale convective systems(MCSs),which are key factors in determining the potential for heavy precipitation.This paper proposed a method for objectively classifying and segmenting MCSs using geosynchronous satellite observations.Validation of the product relative to the classification in radar composite reflectivity imagery indicates that the algorithm offers skill for discriminating between convective and stratiform areas and matched 65%of convective area identifications in radar imagery with a false alarm rate of 39%and an accuracy of 94%.A quantitative evaluation of the similarity between the structures of 50 MCSs randomly obtained from satellite and radar observations shows that the similarity was as high as 60%.For further testing,the organizational modes of the MCS that caused the heavy precipitation in Northwest China on August 21,2016(hereinafter known as the“0821”rainstorm)were identified.It was found that the MCS,accompanied by the“0821”rainstorm,successively exhibited modes of the isolated cell,squall line with parallel stratiform(PS)rain,and non-linear system during its life cycle.Among them,the PS mode might have played a key role in causing this flooding.These findings are in line with previous studies.

Effect of process parameters on the morphology of aluminum/copper alloy lap joints by red and blue hybrid laser welding

In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.

Contribution to the Knowledge of the Afrotropical Spilomelinae (Lepidoptera, Crambidae): A New Genus in the Tribe Nomophilini Kuznetzov & Stekolnikov 1979 Based on Morphology and DNA Barcoding

The new genus Parathrausta gen.n. in the subfamily Spilomelinae (Lepidoptera, Crambidae) is erected based on a series of specimens collected in the Afrotropical region of Saudi Arabia. The new genus is monotypical, with Parathrausta internervalis sp.n. its type species. The adults of the type species, the male genitalia, the female genitalia and the tympanal organs are described and figured. The new genus is recognized as related by characters in the male and female genitalia with genera in the tribes Steniini Guine, 1854 and Nomophilini Kuznetzov & Stekolnikov, 1979, namely with Bradina Lederer, 1863, Perisyntrocha Meyrick, 1894, Diathrausta Lederer, 1863, Diasemiopsis Munroe, 1957, Diasemiodes Munroe, 1957 and with the genera in the Duponchelia Zeller, 1847 group comprising Duponchelia Zeller, 1847, Penestola Mschler, 1890, Tatobotys Butler, 1880 and Hymenoptychis Zeller, 1852. The character states differentiating the new genus from the comparative genera are discussed. Potential autapomorphies of the new genus are listed. The tribal assignment of the new genus to the Nomophilini Kuznetzov & Stekolnikov, 1979 based on morphological characters is discussed. The support of the tribal and cladistic assignment of the new genus as a sister clade to Diathrausta Lederer, 1863 based phylogenetic analyses (NJ, MP and ML) is shown. An unusually strong genetic divergence of the genus in the COI segment of the mt-DNA based on the Tamura-Nei distance measure from the morphologically related genera is recognized and addressed.

Biosynthesis of Silver Nanoparticles with Clerodendron phlomoides Leave Extract:Particle Morphology,Antimicrobial Potential and Application

Silver nanoparticles are versatile nanomaterials that have found numerous applications in various fields.The use of plant extract for the synthesis of silver is a green and sustainable approach.Clerodendron phlomoides leaves extract has been found to contain various phytochemicals,such as phenols,flavonoids,tannins,and alkaloids,which possess reducing and stabilizing properties that can aid the production of silver particles.In this paper,morphological and topographical analyses were performed on silver nanoparticles.The biosynthesized silver nanoparticles showed antimicrobial potential against wound pathogens.SEM and TEM micrographs revealed that the particles were sphere and nanosized,which makes them suitable for various biomedical applications.

Spatial Morphology Evolution Characteristics Analysis of the Resident Population Distribution in Henan, China

The population spatial distribution pattern and its evolving pattern play an important role in regional allocation of social resources and production factors, formulation of regional development plans, construction of a better life society, and promotion of regional economic development. Based on the resident population statistics data of Henan province from 2006 to 2021, with county as the basic study unit, the paper studies the spatial morphology characteristics and its evolution patterns of resident population distribution, by using spatial analysis methods such as population distribution center, standard deviation ellipse, and spatial auto correlation analysis. The results show that: the resident population spatial distribution shows unbalanced state, the population agglomeration areas mainly distribute in the northeast part and north part, where the resident population growth rate is significantly higher than other regions, over time, this trend is gradually becoming significant. The resident population distribution has a trend of centripetal concentration, with the degree and trend of centripetal gradually strengthening. The resident population distribution has obvious directional characteristics, but the significance is not high, the weighted resident population average center is approximately located at (4.13740˚N, 113.8935˚E), and the azimuth of the distribution axis is approximately 11.19˚. The population distribution has obvious agglomeration characteristics, with the built-up areas of Zhengzhou and Luoyang as their centers, where have a significant siphon effect on the surrounding population. The southern and southwestern regions in the province form a relatively stable belt area of Low-Low agglomeration areas.

Active phase morphology engineering of NiMo/Al2O3 through La introduction for boosting hydrodesulfurization of 4,6-DMDBT

Herein,we designed and constructed a mesoporous LaAlOx via a solvent evaporation induced self-assembly protocol.The structure and physicochemical property of the corresponding NiMo supported catalyst was analyzed by a set of characterizations,and its catalytic activity was investigated for hydrodesulfurization(HDS)of 4,6-dimethyldibenzothiophene.It has confirmed that the incorporation of La profoundly facilitate the generation of“Type II”NiMoS phase by weakening the interaction of Mo–O–Al leakage and promoting the sulfidation of both Ni and Mo oxides as well as changing the morphology of Ni promoted MoS2 slabs,thereafter boosting the HDS performance substantially.The finding here may contribute to the fundamental understanding of structure-activity in ultra-deep desulfurization and inspire the advancement of highly-efficient HDS catalyst in future.