Nonlinear optimal model and solving algorithms for platform planning problem in battlefield

Platform planning is one of the important problems in the command and control(C2) field. Hereto, we analyze the platform planning problem and present nonlinear optimal model aiming at maximizing the task completion qualities. Firstly, we take into account the relation among tasks and build the single task nonlinear optimal model with a set of platform constraints. The Lagrange relaxation method and the pruning strategy are used to solve the model. Secondly, this paper presents optimization-based planning algorithms for efficiently allocating platforms to multiple tasks. To achieve the balance of the resource assignments among tasks, the m-best assignment algorithm and the pair-wise exchange(PWE)method are used to maximize multiple tasks completion qualities.Finally, a series of experiments are designed to verify the superiority and effectiveness of the proposed model and algorithms.

Multi-objective coordination optimal model for new power intelligence center based on hybrid algorithm

In order to resolve the coordination and optimization of the power network planning effectively, on the basis of introducing the concept of power intelligence center (PIC), the key factor power flow, line investment and load that impact generation sector, transmission sector and dispatching center in PIC were analyzed and a multi-objective coordination optimal model for new power intelligence center (NPIC) was established. To ensure the reliability and coordination of power grid and reduce investment cost, two aspects were optimized. The evolutionary algorithm was introduced to solve optimal power flow problem and the fitness function was improved to ensure the minimum cost of power generation. The gray particle swarm optimization (GPSO) algorithm was used to forecast load accurately, which can ensure the network with high reliability. On this basis, the multi-objective coordination optimal model which was more practical and in line with the need of the electricity market was proposed, then the coordination model was effectively solved through the improved particle swarm optimization algorithm, and the corresponding algorithm was obtained. The optimization of IEEE30 node system shows that the evolutionary algorithm can effectively solve the problem of optimal power flow. The average load forecasting of GPSO is 26.97 MW, which has an error of 0.34 MW compared with the actual load. The algorithm has higher forecasting accuracy. The multi-objective coordination optimal model for NPIC can effectively process the coordination and optimization problem of power network.

Prediction of primary energy demand in China based on AGAEDE optimal model

In this article,we present an application of Adaptive Genetic Algorithm Energy Demand Estimation(AGAEDE) optimal model to improve the efficiency of energy demand prediction.The coefficients of the two forms of the model(both linear and quadratic) are optimized by AGA using factors,such as GDP,population,urbanization rate,and R&D inputs together with energy consumption structure,that affect demand.Since the spurious regression phenomenon occurs for a wide range of time series analysis in econometrics,we also discuss this problem for the current artificial intelligence model.The simulation results show that the proposed model is more accurate and reliable compared with other existing methods and the China's energy demand will be 5.23 billion TCE in 2020 according to the average results of the AGAEDE optimal model.Further discussion illustrates that there will be great pressure for China to fulfill the planned goal of controlling energy demand set in the National Energy Demand Project(2014—2020).

An Optimal Model of the Total Amount Allocation for Surface Water Pollutants Based on the Principles of Equity and Efficiency

The control of total water pollutant amount is an effective method to improve quality of the groundwater, but how to allocate the total amount is an important and difficult work. In this paper, equity and efficiency were bases of the total amount allocation. Took total amount allocation of the surface water pollutant in a car manufacturing group as an example, the current emissions and unit of output value as the bases for cluster analysis, the target unit was divided into ＂key reduction unit＂ and ＂concern reduction unit＂. Then, allocation scheme of the total amount was prepared. This model for research and improvement of the feasibility for total pollutant amount allocation technique has certain reference value.

Optimal Model Average Prediction in Orthogonal Kriging Models

The main objective of this paper is to consider model averaging methods for kriging models.This paper proposes a Mallows model averaging procedure for the orthogonal kriging model and demonstrate the asymptotic optimality of the model averaging estimators in terms of mean square error.Simulation studies are conducted to evaluate the performance of the proposed method and compare it with the competitors to demonstrate its superiority.The authors also analyse a real dataset for an illustration.

Modeling the dynamic optimal advertising in stochastic condition

An effort to model the dynamic optimal advertising was made with the uncertainty of sales responses in consideration. The problem of dynamic advertising was depicted as a Markov decision process with two state variables. When a firm launches an advertising campaign, it may predict the probability that the campaign will obtain the sales réponse. This probability was chosen as one state variable. Cumulative sales volume was chosen as another state variable which varies randomly with advertising. The only decision variable was advertising expenditure. With these variables, a multi-stage Markov decision process model was formulat ed. On the basis of some propositions the model was analyzed. Some analytical results about the optimal strategy have been derived, and their practical implications have been explained.

Effect of Relative Velocity on the Optimal Velocity Model

In this letter, an improved optimal velocity model was proposed that assumes the effect of relative velocity deceases with the increment of gap between successive cars. Numerical simuation was carried out to test whether this model could depict the braking process correctly. The simuation results show good agreement with observed data.

Velocity anticipation in the optimal velocity model

In this paper, the velocity anticipation in the optimal velocity model （OVM） is investigated. The driver adjusts the velocity of his vehicle by the desired headway, which depends on both instantaneous headway and relative velocity. The effect of relative velocity is measured by a sensitivity function. A specific form of the sensitivity function is supposed and the involved parameters are determined by the both numerical simulation and empirical data. It is shown that inclusion of velocity anticipation enhances the stability of traffic flow. Numerical simulations show a good agreement with empirical data. This model provides a better description of real traffic, including the acceleration process from standing states and the deceleration process approaching a stopped car.

MODELING, VALIDATION AND OPTIMAL DESIGN OF THE CLAMPING FORCE CONTROL VALVE USED IN CONTINUOUSLY VARIABLE TRANSMISSION

Associated dynamic performance of the clamping force control valve used in continuously variable transmission （CVT） is optimized. Firstly, the structure and working principle of the valve are analyzed, and then a dynamic model is set up by means of mechanism analysis. For the purpose of checking the validity of the modeling method, a prototype workpiece of the valve is manufactured for comparison test, and its simulation result follows the experimental result quite well. An associated performance index is founded considering the response time, overshoot and saving energy, and five structural parameters are selected to adjust for deriving the optimal associated performance index. The optimization problem is solved by the genetic algorithm （GA） with necessary constraints. Finally, the properties of the optimized valve are compared with those of the prototype workpiece, and the results prove that the dynamic performance indexes of the optimized valve are much better than those of the prototype workpiece.

Detailed string stability analysis for bi-directional optimal velocity model

The class of bi-directional optimal velocity models can describe the bi-directional looking effect that usually exists in the reality and is even enhanced with the development of the connected vehicle technologies. Its combined string stability condition can be obtained through the method of the ring-road based string stability analysis. However, the partial string stability about traffic fluctuation propagated backward or forward was neglected, which will be analyzed in detail in this work by the method of transfer function and its H∞ norm from the viewpoint of control theory. Then, through comparing the conditions of combined and partial string stabilities, their relationships can make traffic flow be divided into three distinguishable regions, displaying various combined and partial string stability performance. Finally, the numerical experiments verify the theoretical results and find that the final displaying string stability or instability performance results from the accumulated and offset effects of traffic fluctuations propagated from different directions.

Spatial batch optimal design based on self-learning Gaussian process models for LPCVD processes

Low pressure chemical vapor deposition(LPCVD) is one of the most important processes during semiconductor manufacturing.However,the spatial distribution of internal temperature and extremely few samples makes it hard to build a good-quality model of this batch process.Besides,due to the properties of this process,the reliability of the model must be taken into consideration when optimizing the MVs.In this work,an optimal design strategy based on the self-learning Gaussian process model(GPM) is proposed to control this kind of spatial batch process.The GPM is utilized as the internal model to predict the thicknesses of thin films on all spatial-distributed wafers using the limited data.Unlike the conventional model based design,the uncertainties of predictions provided by GPM are taken into consideration to guide the optimal design of manipulated variables so that the designing can be more prudent Besides,the GPM is also actively enhanced using as little data as possible based on the predictive uncertainties.The effectiveness of the proposed strategy is successfully demonstrated in an LPCVD process.

Active suspension with optimal control based on a full vehicle model

The 7-DOF model of a full vehicle with an active suspension is developed in this paper.The model is written into the state equation style.Actuator forces are treated as inputs in the state equations.Based on the basic optimal control theory,the optimal gains for the control system are figured out.So an optimal controller is developed and implemented using Matlab/Simulink,where the Riccati equation with coupling terms is deduced using the Hamilton equation.The all state feedback is chosen for the controller.The gains for all vehicle variables are traded off so that majority of indexes were up to optimal.The active suspension with optimal control is simulated in frequency domain and time domain separately,and compared with a passive suspension.Throughout all the simulation results,the optimal controller developed in this paper works well in the majority of instances.In all,the comfort and ride performance of the vehicle are improved under the active suspension with optimal control.

CO_(2) emission control in new CM car-following model with feedback control of the optimal estimation of velocity difference under V2X environment

A new coupled map car-following model in this paper is proposed by considering the influence of the difference of the estimated optimal speed based on the coupled map(CM)car-following model under V2X environment.The stability of the new model is analyzed by applying the control theory,and the conditions are obtained for the stability of the traffic system.And the two scenes of vehicle stopping once and four times have been simulated.The simulation results show that the control term considered with optimal estimation of speed difference can effectively improve the stability of vehicle running and reduce CO_(2) emissions in the CM car-following model.

Optimal Selection Model of Equipment Design Scheme Based on Set Pair Analysis

Selecting the optimal one from similar schemes is a paramount work in equipment design.In consideration of similarity of schemes and repetition of characteristic indices,the theory of set pair analysis(SPA)is proposed,and then an optimal selection model is established.In order to improve the accuracy and flexibility,the model is modified by the contribution degree.At last,this model has been validated by an example,and the result demonstrates the method is feasible and valuable for practical usage.

Prediction of a maximum pull-out load of anchor bolts using an optimal combination model

The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived using the optimally weighted combination theory and the minimum sum of logarithmic squared errors as the objective function.Two typical anchor bolt pull-out engineering cases were selected to compare the performance of the proposed model with those of existing ones.Results showed that the optimal combination model was suitable not only for the slow P-s curve but also for the steep P-s curve.Its accuracy and stable reliability,as well as its prediction capability classification,were better than those of the other prediction models.Therefore,the optimal combination model is an effective processing method for predicting the maximum pull-out load of anchor bolts according to measured data.

Optimal ConfigurationMethod forMulti-Type Reactive Power Compensation Devices in Regional Power Grid with High Proportion ofWind Power

As the large-scale development of wind farms(WFs)progresses,the connection ofWFs to the regional power grid is evolving from the conventional receiving power grid to the sending power grid with a high proportion of wind power(WP).Due to the randomness of WP output,higher requirements are put forward for the voltage stability of each node of the regional power grid,and various reactive power compensation devices(RPCDs)need to be rationally configured to meet the stable operation requirements of the system.This paper proposes an optimal configuration method for multi-type RPCDs in regional power grids with a high proportion of WP.The RPCDs are located according to the proposed static voltage stability index(VSI)and dynamicVSI based on dynamic voltage drop area,and the optimal configuration model of RPCDs is constructed with the lowest construction cost as the objective function to determine the installed capacity of various RPCDs.Finally,the corresponding regional power grid model for intensive access to WFs is constructed on the simulation platform to verify the effectiveness of the proposed method.

Recycled Aggregate Pervious Concrete: Analysis of Influence of Water-Cement Ratio and Fly Ash under Single Action and Optimal Design of Mix Proportion

Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the cement by mass with a water-cement ratio of 0.30 on the properties of Recycled Aggregate Pervious Concrete(RAPC)were studied.Following this,based on the Grey relational-Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)optimization method,the strength,permeability,abrasion loss rate,and material costs of RAPC were adopted as evaluation indices to establish a mix proportion optimization model.The results show that the increase of water-cement ratio and fly ash replacement level of RAPC leads to decreased compres-sive strength while an increase in the permeability and abrasion loss rate.According to test results based on the optimal model 0.30 was identified as the best mix proportion.In addition,ecological-economic analysis of RAPC raw materials was carried out by comparing different natural aggregates.The results of EE(embodied energy)and ECO 2e(embodied CO_(2) emission)pointed out that the combination of recycled aggregate and fly ash leads to sig-nificant ecological and economic benefits.

Comparative research on three-echelon and two-echelon medicine inventory model with positive lead-time

According to the principle of minimizing total cost, the three-echelon optimized medical inventory model with stochastic lead-time and two-echelon optimized medicine inventory model with fixed lead-time are established. The relationship between lead-time and inventory cost is studied by Matlab software. It shows that the variety of lead-time has an important effect on medicine inventory systems. Numerical simulation and sensitivity analysis of two models are presented by Lingo software. Based on analysis, it is concluded that the two-echelon model with lead-time results in inventory cost savings, and keeps the quality of care as reflected in service levels when compared with the three-echelon network structure.

MODEL OF OPERATING AND BALANCING ASSEMBLY LINE IN A MASS CUSTOMIZATION ENVIRONMENT

The successful implementation of mass customization lies on reengineeringtechnology and management methods to organize the production. Especially in assembly phase, variousproduct configurations, due-time penalties and order-driven strategy challenge the traditionaloperation and management of assembly lines. The business features and the operation pattern ofassembly line based on mass customization are analyzed. And the research emphatically studiesvarious technologic factors to improve customer satisfaction and their corresponding implementmethods in operating assembly line. In addition, the models are proposed for operating assembly lineunder dynamic process environment in mass customization. A genetic approach is developed to providethe optimal solution to the models. The effectiveness of the proposed approach is evaluated with anindustrial application.

A New Modified GM (1,1) Model: Grey Optimization Model

Based on the optimization method, a new modified GM (1,1) model is presented, which is characterized by more accuracy prediction for the grey modeling.