Storage stability of SBS modified bitumen based on mixed-level orthogonal array design

The styrene-butadiene-styrene（SBS） modified bitumens with different contents of SBS modifiers are stored in different conditions to study the storage stability of SBS modified bitumen.Mixed-level orthogonal array design（OAD） is used and factors such as SBS modifier content,storage time,storage temperature and container size are chosen in a mixed-level OAD with an OA16（31×44） matrix.Parameters like the separation softening point difference（the separation difference of the ring and ball softening point of the top and bottom samples） and the average softening point（the arithmetic mean of the softening points of the top and bottom samples） are proposed to evaluate the separation and the ageing of modified bitumen during storage in this experiment,respectively.The results reveal that the separation and the ageing during storage exhibit a complicated variation for storage temperature and time.The separation softening point difference decreases with the storage temperature rising from 20 to 120 ℃ and increases with the temperature exceeding 120 ℃,and the average softening point drops with the storage time being prolonged.Different storage conditions have various effects on the storage stability of SBS modified bitumen.

Optimization by orthogonal array design of ion-pair HPLC separation of the enzymatic hydrolysis products of yeast RNA

The separation of enzymatic hydrolysis products of yeast RNA by ion-pair HPLC was studied.A modified chromatographic response function（MCRF） was proposed to appraise the effectiveness of chromatographic separation.This function takes the number of peaks,resolution and the retention time of the last peak into consideration.It shows advantages for optimization of HPLC separation of complex mixtures.An orthogonal array design was used to separate the hydrolysate of yeast RNA and the optimal chromatographic conditions were obtained.

Optimization for Microbial Degumming of Ramie with Bacillus subtilis DZ_(5) in Submerged Fermentation by Orthogonal Array Design and Response Surface Methodology

As a kind of natural fiber,ramie fiber has distinctive advantages in textile application,but the application is limited due to the traditional degumming mode.Compared with the traditional degumming process,the microbial degumming process has many advantages.To obtain the optimal conditions for degumming ramie with Bacillus subtilis DZ_(5)(BS DZ_(5)),a combined statistical approach of orthogonal array design(OAD)and response surface methodology(RSM)was used.The influences of initial pH of the bacteria medium,culture temperature,shaking speed,degumming time and inoculum size on submerged fermentation degumming were evaluated by using fractional factorial design.The main factors in the analysis were culture temperature,shaking speed and initial pH.The residual gum mass fraction was used as the optimization index,and the optimal conditions for degumming were determined by central composite design and RSM.Thus with only a limited number of experiments,an optimal ramie microbial degumming condition was found as the culture temperature of 40℃,the initial pH in the culture medium of 8.5,the shaking speed of 205 r/min,the degumming time of 96 h and the inoculum size of 5%.After microbial degumming of ramie under the optimal conditions,there was only 10.6%residual gum by mass in the fiber.In addition,the effective degumming of BS DZ_(5)was also confirmed by a scanning electron microscope(SEM).

Orthogonal array design for the optimization of stripping Sr(Ⅱ) from ionic liquids using supercritical CO2

The strontium ions extracted from the aqueous phase into 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide(C_2mimNTf2) with dicyclohexyl-18-crown-6(DCH18C6) was stripped effectively by supercritical CO_2(sc-CO_2).Hexafluoroacetylacetone(HFAA)-acetonitrile was found to be an excellent modifier of sc-CO_2 to enhance the stripping efficiency.In the orthogonal array design(OAD),OA_(25)(5~5)matrix was employed to optimize the stripping of Sr(Ⅱ) from the DCH 18C6-C_2mimNTf_2 system.Effects of five experimental factors:temperature,pressure,concentration of HFAA,static and dynamic extraction times as well as each factor at five-levels on the stripping of Sr(Ⅱ) were optimized.The effects of these parameters were treated by the analysis of variance(ANOVA).The results showed that Sr(II) could be nearly 100%extracted from the IL phase at 308 K,30 MPa,40 min of dynamic extraction and 60 mmol·L^(-1) HFAA in acetonitrile,respectively.Finally,the stripping mechanism was studied by ESI-MS.

Optimization of Supercritical Fluid Extraction and Rapid Resolution LC-MS/ESI Identification of Chromones from Saposhnikoviae Radix through Orthogonal Array Design

Objective To establish a rapid and effective supercritical fluid extraction（SFE） and rapid resolution liquid chromatography method coupled with diode-array detector（RRLC-DAD） to quantify the chromones in a species. Methods The effects of four parameters including ethanol concentration（50%-90%）, pressure（25-45 MPa）, temperature（40-60 ℃）, and time（30-90 min） on the chromones yields, namely prim-O-glucosylcimifugin, cimifugin, 5-O-methylvisammioside, and sec-O-glucosylhamaudol, were investigated using SFE system with orthogonal array design（OAD）. Furthermore, the extracts were analyzed using rapid resolution liquid chromatography coupled with diode-array detector（RRLC-DAD） system to confirm the results. Results Under the optimized conditions, i.e., 35 MPa of pressure, 60 ℃ of temperature, 70% ethanol, and 60 min of time, the yields of prim-O-glucosylcimifugin, cimifugin, 5-O-methylvisammioside, sec-O-glucosylhamaudol, and total chromones were 3.514, 0.132, 6.242, 0.342, and 10.231 mg/g, respectively. In comparison with ultrasonic assisted extraction（UAE）, SFE was able to yield a 20.7% increase in the total chromones from Saposhnikoviae Radix. Conclusion SFE is an alternative and promising method to extract chromones from this species, and the established RRLC-DAD method could serve as a rapid and effective method for the identification of chromones from Saposhnikoviae Radix.

Influence of Co, W and Ti on the Stress-rupture Lives of a Single Crystal Nickel-base Superalloy

The influence of Co, W and Ti on stress-rupture lives of a Ni-Cr-AI-Mo-Ta-Co-W-Ti single crystal nickel-base superalloy has been investigated using a L9 （34） orthogonal array design （OAD） by statistical analysis. At a selected composition range, Ti content was the most important factor to the effect of the stress-rupture lives and then followed by Co content. W content had the minimum effect on stress-rupture lives. The optimal alloy should contain 10 wt pct Co, 8 wt pct W and zero Ti. The optimized alloy also had good microstructural stability during thermal exposure at 870℃ for 500 h.

Quantitative determination of polysaccharide in Curcuma wenyujin, a traditional Chinese medicine, by a phenol-sulfuric acid method

Curcuma wenyujin has been widely used as a traditional medicine in China. In this paper a strategy for the quantitative determination of the polysaccharide by a phenol-sulfuric acid method was described. Involved in three factors, 5% phenol volume, H2SO4 volume, and temperature of water bath, we adopted the L9（3）3 orthogonal array design to gain the optimal colorimetric method. 3.0 ml of polysaccharide solution, 1.0 ml, 5% phenol and 7.0 ml H2SO4 were mixed with constant stirring in a glass vessel, and then kept in a water bath at 40 ℃. After cooling to room temperature for 20 min, the absorbance values were recorded by the UV-2501 PC spectrometer at the wavelength range of 485 nm. The polysaccharide content in Curcuma wenyujin were 3.21%, 3.23%, 3.20%, 3.18~/0, 3.22% and 2.38%, respectively. All results showed that this method was adequate, valid and applicable, may be applied to the determination of other bacterial polysaccharide as well.