Optimal Design of High-Speed Partial Flow Pumps using Orthogonal Tests and Numerical Simulations

To investigate the influence of structural parameters on the performances and internal flow characteristics of partial flow pumps at a low specific speed of 10000 rpm,special attention was paid to the first and second stage impeller guide vanes.Moreover,the impeller blade outlet width,impeller inlet diameter,blade inclination angle,and number of blades were considered for orthogonal tests.Accordingly,nine groups of design solutions were formed,and then used as a basis for the execution of numerical simulations(CFD)aimed at obtaining the efficiency values and heads for each design solution group.The influence of impeller geometric parameters on the efficiency and head was explored,and the“weight”of each factor was obtained via a range analysis.Optimal structural parameters were finally chosen on the basis of the numerical simulation results,and the performances of the optimized model were verified accordingly(yet by means of CFD).Evidence is provided that the increase in the efficiency and head of the optimized model was 12.11%and 23.5 m,respectively,compared with those of the original model.

Optimization of Compound Coptis Ointment Extraction through the Integration of Pharmacodynamic Indices and Orthogonal Test

[Objectives]To determine the optimal reflux extraction process conditions for Compound Coptis Ointment.[Methods]The study employed the orthogonal experimental design method and drug-sensitive disc agar diffusion method to evaluate the extraction rate,berberine hydrochloride content,and bacteriostatic ring diameter of the extract as comprehensive indices,and optimized the extraction process conditions of Compound Coptis Ointment using ethanol reflux.[Results]Based on the results of comprehensive indices,the optimal reflux extraction conditions for Compound Coptis Ointment were determined to be soaking in 1.5 times the amount of 70%ethanol for 2 h,followed by two extractions with 6 times the amount of 70%ethanol for 1 h each time.Three verification tests were conducted under the optimal process conditions.The yield of the extract was 28.32%±0.53%,the content of berberine hydrochloride was 4.68%±0.45%,and the diameter of the bacteriostatic ring was(2.5±0.2)cm.[Conclusions]The extract had higher drug content and exhibited better antibacterial effects.The optimized extraction process is simple,stable,and reliable,and can be effectively used to optimize the extraction process of Compound Coptis Ointment.

Orthogonal tests of copper-clad aluminum bimetal continuous casting by nitrogen pressure core-illing

To provide theoretical basis and practical guidance for preparing composite rods by direct continuous casting, copper-clad aluminum composite rods of external copper layer diameter 12 mm and inner aluminum core diameter 8 mm were manufactured. Orthogonal tests consisted of three factors and three levels were carried out to research the effects of melting copper temperature, continuous casting speed and nitrogen pressure on the performance of composite rods. Results showed that nitrogen pressure is the most important factor in influencing the surface quality; continuous casting speed is the most important factor in influencing copper & aluminum inter diffusion amount. Nitrogen pressure can noticeably improve the surface quality and make the rods easily be drawn out, but the surface quality does not show visible improvement when the nitrogen pressure is above 0.05 MPa. Measured by tests, the compound layer can be divided into three types according to its cladding layer degree: deficient cladding, normal cladding and excess cladding. The diameter of normal copper-clad aluminum composite rods can be successfully drawn less than 0.6 mm without annealing.

Mathematical model for abrasive suspension jet cutting based on orthogonal test design

This paper describes the application of orthogonal test design coupled with non-linear regression analysis to optimize abrasive suspension jet （AS J） cutting process and construct its cutting model. Orthogonal test design is applied to cutting stainless steel. Through range analysis on experiment results, the optimal process conditions for the cutting depth and the kerr ratio of the bottom width to the top width can be determined. In addition, the analysis of ranges and variances are all employed to identify various factors： traverse rate, working pressure, nozzle diameter, standoff distance which denote the importance order of the cutting parameters affecting cutting depth and the kerf ratio of the bottom width to the top width. ~rthermore, non-linear regression analysis is used to establish the mathematical models of the cutting parameters based on the cutting depth and the kerr ratio. Finally, the verification experiments of cutting parameters＇ effect on cutting performance, which show that optimized cutting parameters and cutting model can significantly improve the prediction of the cutting ability and quality of ASJ.

Orthogonal tests of lead-clad tin bimetal continuous casting by air pressure core-filling

To provide theoretical basis and practical guidance for preparing composite rods of external diameter no larger than 12 mm by directly continuous casting,low melting point materials of lead and tin were selected to prepare composite rods of external diameter 12 mm and inner diameter 8 mm with air pressing core filled continuous casting process.The orthogonal tests consisting of three factors and three levels were designed to investigate the parameters of melting lead temperature,continuous casting speed and air pressure that affect the performance of the composite rods.The results show that melting lead temperature is the most important factor that influences the solid/liquid interface location;continuous casting speed is the most important factor that influences the surface quality and lead and tin inter-diffusion amount;air pressure can improve the surface quality obviously and make the rods easily drawn out,but the surface quality cannot get obvious improvement when the air pressure is above 0.03 MPa.The composite rods have excellent surface quality,obvious intermediate layer,even thick clad,and metallurgical bonding interface under the condition of melting lead temperature of 375 °C,continuous casting speed of 10 mm/min,and air pressure of 0.03 MPa.

Orthogonal Test About Biogas Upgrading by Pressured Water Scrubbing

Biogas is a kind of regenerable energy which is inexpensive and friendly to the environment, but the potential ofbiogas is difficult to develop fully in China, for most biogas have badly qualities and the utilization of it is monotonous. The suitable operation term about biogas upgrading by pressurized water scrubbing was researched through the orthogonal test in this study. Two sorts of scrubber packing included the random multidimensional hollow sphere packing and the structured screen packing were also used, and the effects of experiment factors included packing, water temperature, gas flow speed, water flow speed and washing pressure were studied. The results showed that better effect was got when the screen structured packing was used; all the five test factors affected the processing significantly in the arrange as before and had better and better significant effects.

Optimization of Extraction Process of Zihua Qinghuo Capsule by Orthogonal Test

With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times, 1.5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible, and could provide reliable reference for practical production.

Study on the insecticidal activities of the extracts from four plants under orthogonal test

Aim To prepare dry powder insecticide by mixing the plant samples of Aconitum ochranthum Mey.,Aconitum hemsleyanum Pritz.and Dictamnus dasycarpus Turcz.Method The dosage ratios of the break stocks from the plants mentioned above are installed as four factors,and three levels are selected for every factor.The test is actualized according to L 9(3 4) orthogonal array.Results An optimized recipe A 3 B 3 C 3 D 1 has been obtained after considering multifarious factors such as the resources of these plants and the water-solubility of samples.Conclusion The dry powder insecticide prepared by mixing the plant samples mentioned above as 1∶1∶1mass ratio revealed that insecticidal activities for cickets,grasshopper,aphid,and 3rd instar Mythimna separata walker are significant,respectively.

Warm Compaction Process of P/M Steels by Orthogonal Testing Method

In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of warm compacted samples was studied. According to the orthogonal test method, the authors systematically study the influence of the different compaction pressure, condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process, and put forward the optimal process parameter of warm compaction experiment. It is found that, a high compaction pressure （≥700 MPa）, die wall lubrication combined with a small amount of internal lubricants, and fitting compaction temperature by different condition of lubrication, are the optimal parameters in warm compaction process.

Fuzzy Analysis Method for Orthogonal Test on Seed Propagation of Eurya chinensis

Fuzzy analysis method for orthogonal test was used to study the effect of different sowing depth, seed soaking time, illumination intensity and culture soil on the seed germination rate of Eurya chinensis. The results showed that the effect of seed soaking time on the sowing and seedling of Eurya chinensis was the biggest, and the ethers were illumination intensity, sowing depth and culture soil. The germi- nation rate was the highest when composite soil was used as culture soil and seeds were soaked for 48 h and sowed in topsoil, and a layer of sunshade net was used.

Optimization of the Ethanol Extraction Method of Monoester Alkaloids from Radix Aconiti Preparata Based on HPLC-MS and Orthogonal Test

[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol times and extraction time were investigated by HPLC-MS combined with orthogonal test to optimize extraction process using the content of monoester alkaloids( the sum of benzoyl neoaconitine,benzoyl hypoaconitine and benzoyl aconitine) as an index.[Results]The optimum ethanol extraction technology was as follows: 75% ethanol,ethanol amount 25 times of the medicinal material,and each extraction for 1. 5 h.[Conclusions] The optimal extraction technology is simple,feasible,stable and reliable. It can provide reference for the industrial production and quality control of monoester alkaloids from Radix Aconiti Preparata.

Research on Treatment of Landfill Leachate Polluting Groundwater by Orthogonal Test

Through PRB simulated device and orthogonal test,we discussed the treatment effect of groundwater polluted by landfill leachate with three reaction mediums of zero-valent iron powder,activated carbon and zeolite. We considered four factors of iron powder mass,activated carbon mass,particle size of iron powder and zeolite mass,and designed a two-level orthogonal test. It concluded that effluent pH appeared to fall or rise as the reaction proceeded,which changed during 7- 8. The removal rates of CODCrin eight reactors were during 60. 7%- 78. 3%,and the removal rates of NH3-N were during 34. 0%- 58. 8%. Activated carbon mass and the interaction of iron powder mass and activated carbon mass had significant influences on the removal of CODCr,while iron powder mass,particle size of iron powder and zeolite mass had insignificant influences on the removal of CODCr. Zeolite mass and activated carbon mass had significant influences on the removal of NH3,while iron powder mass,particle size of iron powder and the interaction with activated carbon mass had insignificant influences on the removal of NH3-N.

Optimization of short-circuit transition parameters of Q235B steel GMAW based on orthogonal gray relational analysis

In gas metal arc welding(GMAW)process,the short-circuit transition was the most typical transition observed in molten metal droplets.This paper used orthogonal tests to explore the coupling effect law of welding process parameters on the quality of weld forming under short-circuit transition,the design of 3 factors and 3 levels of a total of 9 groups of orthogonal tests,welding current,welding voltage,welding speed as input parameters:effective area ratio,humps,actual linear power density,aspect ratio,Vickers hardness as output paramet-ers(response targets).Using range analysis and trend charts,we can visually depict the relationship between input parameters and a single output parameter,ultimately determining the optimal process parameters that impact the single output index.Then combined with gray the-ory to transform the three response targets into a single gray relational grade(GRG)for analysis,the optimal combination of the weld mor-phology parameters as follows:welding current 100 A,welding voltage 25 V,welding speed 30 cm/min.Finally,validation experiments were conducted,and the results showed that the error between the gray relational grade and the predicted value was 2.74%.It was observed that the effective area ratio of the response target significantly improved,validating the reliability of the orthogonal gray relational method.

Numerical Study on Die Design Parameters of Self-Pierce Riveting Process Based on Orthogonal Test

The concave die design of self-pierce riveting(SPR) is of critical importance for product quality. The optimization of concave die parameters based on orthogonal test is proposed to explore the relationship between self-pierce riveted joint quality and die parameters. There are nine independent die parameter factors in orthogonal test and each factor has 4 levels. In order to evaluate the interlock and neck thickness, we carry out numerical simulations by the software DEFORM-2D. Then, the primary and secondary factors that affect the joint quality have been found out by means of range analysis. Finally, an optimization scheme is brought forward to design concave die in SPR process, which indicates that the joint has higher quality than that of former orthogonal tests.This work can be extended by a detailed mechanical and fatigue analysis for the joint quality of SPR process.

Optimization of Smashing Tissue Extraction Technology of Schisandra chinensis Fruits by Orthogonal Test

Objective To optimize the extract technology of active lignins from the fruits of Schisandra chinensis. Methods The content of schizandrin, gomisin A, and deoxyschizandrin were selected as standards to evaluate the efficiency of smashing tissue extraction (STE). Solid-liquid ratio, extracting times, ethanol concentration, and extracting time were investigated through orthogonal test. Results The optimized conditions for STE were ten times amount of 80% EtOH, extracting for three times, and 2 min for each time. Conclusion STE could obtain relatively higher yield, simplicity of operation, and benefit for environment protection. It could be better choice for the extraction of S. chinensis.

Optimization of Microwave-assisted Extraction of Polyphenols from Enteromorpha prolifra by Orthogonal Test

Objective To optimize microwave-assisted extraction of polyphenols from Enteromorpha prolifra. Methods Based on single-factor tests, an efficient microwave-assisted extraction (MAE) technique was developed to extract bioactive polyphenols from E. prolifra through orthogonal L16(4)5 test. Results The highest yield (0.923 ± 0.013) mg/g was obtained when microwave power, solvent to raw material ratio, irradiation time, ethanol concentration, and extraction cycles were 500 W, 25 mL/g, 25 min, 40%, and 3, respectively, which was higher than that of Soxhlet extraction with methanol for 6 h, ultrasound-assisted extraction with 40% ethanol for 1 h twice and heat reflux extraction with 40% ethanol for 2 h twice. Conclusion This finding indicates that MAE is a superior technique for the extraction of polyphenols due to less impurity, higher time efficiency and yield.

Inflatable Wing Design Parameter Optimization Using Orthogonal Testing and Support Vector Machines

The robust parameter design method is a traditional approach to robust experimental design that seeks to obtain the optimal combination of factors/levels. To overcome some of the defects of the inflatable wing parameter design method, this paper proposes an optimization design scheme based on orthogonal testing and support vector machines （SVMs）. Orthogonal testing design is used to estimate the appropriate initial value and variation domain of each variable to decrease the number of iterations and improve the identification accuracy and efficiency. Orthogonal tests consisting of three factors and three levels are designed to analyze the parameters of pressure, uniform applied load and the number of chambers that affect the bending response of inflatable wings. An SVM intelligent model is established and limited orthogonal test swatches are studied. Thus, the precise relationships between each parameter and product quality features, as well the signal-to-noise ratio （SNR）, can be obtained. This can guide general technological design optimization.

Mechanical Test and Meso-Model Numerical Study of Composite Rubber Concrete under Salt-Freezing Cycle

A composite rubber concrete(CRC)was designed by combining waste tire rubber particles with particle sizes of 3~5 mm,1~3 mm and 20 mesh.Taking the rubber content of different particle sizes as the influencing factors,the range and variance analysis of the mechanical and impermeability properties of CRC was carried out by orthogonal test.Through analysis,it is concluded that the optimal proportion of 3~5 mm,1~3 mm,and 20 mesh particle size composite rubber is 1:2.5:5.5 kinds of CRC and 3 kinds of ordinary single-mixed rubber concrete(RC)with a total content of 10%~20%were designed under this ratio,and the salt-freezing cycle test was carried out with a concentration of 5%Na 2 SO4 solution.The physical and mechanical damage laws during 120 salt-freezing cycles are obtained,and the corresponding damage prediction model is established according to the experimental data.The results show that:on the one hand,the composite rubber in CRC produces a more uniform“graded”structure,forms a retractable particle group,and reduces the loss of mechanical properties of CRC.On the other hand,colloidal particles with different particle sizes are used as air entraining agent to improve the pore structure of concrete and introduce evenly dispersed bubbles,which fundamentally improves the durability of concrete.Under the experimental conditions,the CRC performance is the best when the overall content of composite rubber is 15%.

Heat dissipation enhancement method for finned heat sink for AGV motor driver's IGBT module

With the widespread use of high-power and highly integrated insulated gate bipolar transistor(IGBT),their cooling methods have become challenging.This paper proposes a liquid cooling scheme for heavy-duty automated guided vehicle(AGV)motor driver in port environment,and improves heat dissipation by analyzing and optimizing the core component of finned heat sink.Firstly,the temperature distribution of the initial scheme is studied by using Fluent software,and the heat transfer characteristics of the finned heat sink are obtained through numerical analysis.Secondly,an orthogonal test is designed and combined with the response surface methodology to optimize the structural parameters of the finned heat sink,resulting in a 14.57%increase in the heat dissipation effect.Finally,the effectiveness of heat dissipation enhancement is verified.This work provides valuable insights into improving the heat dissipation of IGBT modules and heat sinks,and provides guidance for their future applications.

Microwave assisted-semi bionic extraction of lignan compounds from Fructus Forsythiae by orthogonal design

Microwave assisted-semi bionic extraction (MASBE) process for lignans from Fructus Forsythiae was studied. The influences of solvent pH value, microwave power, dosage of solvent and irradiation time were investigated. Optimum extracting parameters were determined by orthogonal experiments as follows: pH value of solvent at first extraction is 5.5-6.0, that at the second extraction is 7-8; microwave power is 700 W; mass ratio of Fructus Forsythiae to water is 1-12; irradiation time is 10 min, and extracting times is two. Under these optimal conditions, the yield of lignans reaches 0.364%. Compared with the conventional extraction methods, the MASBE process has the advantages of high extraction rate, high extraction selectivity.