Yields,growth and water use under chemical topping in relations to row configuration and plant density in drip-irrigated cotton

Background Water deficit is an important problem in agricultural production in arid regions.With the advent of wholly mechanized technology for cotton planting in Xinjiang,it is important to determine which planting mode could achieve high yield,fiber quality and water use efficiency(WUE).This study aimed to explore if chemical topping affected cotton yield,quality and water use in relation to row configuration and plant densities.Results Experiments were carried out in Xinjiang China,in 2020 and 2021 with two topping method,manual topping and chemical topping,two plant densities,low and high,and two row configurations,i.e.,76 cm equal rows and 10+66 cm narrow-wide rows,which were commonly applied in matching harvest machine.Chemical topping increased seed cotton yield,but did not affect cotton fiber quality comparing to traditional manual topping.Under equal row spacing,the WUE in higher density was 62.4%higher than in the lower one.However,under narrow-wide row spacing,the WUE in lower density was 53.3%higher than in higher one(farmers’practice).For machine-harvest cotton in Xinjiang,the optimal row configuration and plant density for chemical topping was narrow-wide rows with 15 plants m-2 or equal rows with 18 plants m-2.Conclusion The plant density recommended in narrow-wide rows was less than farmers’practice and the density in equal rows was moderate with local practice.Our results provide new knowledge on optimizing agronomic managements of machine-harvested cotton for both high yield and water efficient.

基于改进Ratio统计量的重尾AR(p)时间序列均值变点检验

文章提出两个改进的Ratio统计量来研究重尾AR(p)时间序列均值变点检验问题,在原假设下推导了统计量的渐近分布,且在备择假设下证明了其一致性。由于重尾指数未知且难以估计,因此结合Wild Bootstrap重抽样方法来确定渐近分布的临界值;在均值变点存在的情形下,给出了变点位置的一致估计量。数值模拟结果表明:统计量的临界值均不受重尾指数和自回归系数的影响,其经验水平和经验势均取得满意的效果;尤其在原假设下,积分型Ratio统计量的经验水平表现出更好的稳健性,而在备择假设下,最值型Ratio统计量则具备更好的显著性。最后,基于一组股票数据,从实际应用角度进一步阐明所提方法的有效性和可行性。

Predictive Ability of Hypertriglyceridemic Waist,Hypertriglyceridemic Waist-to-Height Ratio,and Waist-to-Hip Ratio for Cardiometabolic Risk Factors Clustering Screening among Chinese Children and Adolescents

Objective Hypertriglyceridemic waist(HW),hypertriglyceridemic waist-to-height ratio(HWHtR),and waist-to-hip ratio(WHR)have been shown to be indicators of cardiometabolic risk factors.However,it is not clear which indicator is more suitable for children and adolescents.We aimed to investigate the relationship between HW,HWHtR,WHR,and cardiovascular risk factors clustering to determine the best screening tools for cardiometabolic risk in children and adolescents.Methods This was a national cross-sectional study.Anthropometric and biochemical variables were assessed in approximately 70,000 participants aged 6–18 years from seven provinces in China.Demographics,physical activity,dietary intake,and family history of chronic diseases were obtained through questionnaires.ANOVA,χ2 and logistic regression analysis was conducted.Results A significant sex difference was observed for HWHtR and WHR,but not for HW phenotype.The risk of cardiometabolic health risk factor clustering with HW phenotype or the HWHtR phenotype was significantly higher than that with the non-HW or non-HWHtR phenotypes among children and adolescents(HW:OR=12.22,95%CI:9.54-15.67;HWHtR:OR=9.70,95%CI:6.93-13.58).Compared with the HW and HWHtR phenotypes,the association between risk of cardiometabolic health risk factors(CHRF)clustering and high WHR was much weaker and not significant(WHR:OR=1.14,95%CI:0.97-1.34).Conclusion Compared with HWHtR and WHR,the HW phenotype is a more convenient indicator with higher applicability to screen children and adolescents for cardiovascular risk factors.

Systemic immune-inflammation index,neutrophilto-lymphocyte ratio,and platelet-to-lymphocyte ratio in patients with type 2 diabetes at different stages of diabetic retinopathy

AIM:To investigate systemic immune-inflammation index(SII),neutrophil-to-lymphocyte ratio(NLR),and plateletto-lymphocyte ratio(PLR)levels in patients with type 2 diabetes at different stages of diabetic retinopathy(DR).METHODS:This retrospective study included 141 patients with type 2 diabetes mellitus(DM):45 without diabetic retinopathy(NDR),47 with non-proliferative diabetic retinopathy(NPDR),and 49 with proliferative diabetic retinopathy(PDR).Complete blood counts were obtained,and NLR,PLR,and SII were calculated.The study analysed the ability of inflammatory markers to predict DR using receiver operating characteristic(ROC)curves.The relationships between DR stages and SII,PLR,and NLP were assessed using multivariate logistic regression.RESULTS:The average NLR,PLR,and SII were higher in the PDR group than in the NPDR group(P=0.011,0.043,0.009,respectively);higher in the NPDR group than in the NDR group(P<0.001 for all);and higher in the PDR group than in the NDR group(P<0.001 for all).In the ROC curve analysis,the NLR,PLR,and SII were significant predictors of DR(P<0.001 for all).The highest area under the curve(AUC)was for the PLR(0.929 for PLR,0.925 for SII,and 0.821 for NLR).Multivariate regression analysis indicated that NLR,PLR,and SII were statistically significantly positive and independent predictors for the DR stages in patients with DM[odds ratio(OR)=1.122,95%confidence interval(CI):0.200–2.043,P<0.05;OR=0.038,95%CI:0.018–0.058,P<0.05;OR=0.007,95%CI:0.001–0.01,P<0.05,respectively).CONCLUSION:The NLR,PLR,and SII may be used as predictors of DR.

Effects of the Water-Cement Ratio and the Molding Temperature on the Hydration Heat of Cement

The effects of the water-cement ratio and the molding temperature on the hydration heat of cement were investigated with semi-adiabatic calorimetry.The specimens were prepared with water-cement ratios of 0.31,0.38,and 0.45,and the molding temperature was specified at 10 and 20℃.The experimental results show that,as the water-binder ratio increases,the value of the second temperature peak on the temperature curve of the cement paste decreases,and the age at which the peak appears is delayed.The higher the water-cement ratio,the higher the hydration heat release in the early period of cement hydration,but this trend reverses in the late period.There are intersection points of the total hydration heat curve of the cement pastes under the influence of the water-cement ratio,and this law can be observed at both molding temperatures.With the increase in the molding temperature,the age of the second temperature peak on the temperature curve of the cement paste will advance,but the temperature peak will decrease.The higher the molding temperature,the earlier the acceleration period of the cement hydration began,and the larger the hydration heat of the cement in the early stage,but the smaller the total heat in the late period.A subsection function calculation model of the hydration heat,which was based on the existing models,was proposed in order to predict the heat of the hydration of the concrete.

Prognostic role of platelet-to-lymphocyte ratio and neutrophil-to-lymphocyte ratio in patients with non-metastatic and metastatic prostate cancer:A meta-analysis and systematic review

Objective: To analyze data available in the literature regarding a possible prognostic value of the platelet-to-lymphocyte ratio (PLR) and neutrophil-to-lymphocyte ratio (NLR) in prostate cancer (PCa) patients stratified in non-metastatic and metastatic diseases.Methods: A literature search process was performed following the Preferred Reporting Items for Systematic reviews and Meta-Analyses guidelines. In our meta-analysis, the pooled event rate estimated and the pooled hazard ratio were calculated using a random effect model.Results: Forty-two articles were selected for our analysis. The pooled risk difference for non-organ confined PCa between high and low NLR cases was 0.06 (95% confidence interval [CI]: −0.03-0.15) and between high and low PLR cases increased to 0.30 (95% CI: 0.16-0.43). In non-metastatic PCa cases, the pooled hazard ratio for overall mortality between high and low NLR was 1.33 (95% CI: 0.78-1.88) and between high and low PLR was 1.47 (95% CI: 0.91-2.03), whereas in metastatic PCa cases, between high and low NLR was 1.79 (95% CI: 1.44-2.13) and between high and low PLR was 1.05 (95% CI: 0.87-1.24).Conclusion: The prognostic values of NLR and PLR in terms of PCa characteristics and responses after treatment show a high level of heterogeneity of results among studies. These two ratios can represent the inflammatory and immunity status of the patient related to several conditions. A higher predictive value is related to a high NLR in terms of risk for overall mortality in metastatic PCa cases under systemic treatments.

Elliptical vibration chiseling:a novel process for texturing ultra-high-aspect-ratio microstructures on the metallic surface

High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon devices.However,the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing techniques.This study proposes a novel cutting-based process,namely elliptical vibration chiseling(EV-chiseling),for the high-efficiency texturing of surface microstructures with an ultrahigh aspect ratio.Unlike conventional cutting,EV-chiseling superimposes a microscale EV on a backward-moving tool.The tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material deformation.Thanks to the tool’s backward movement,the chip is left on the material surface to form a microstructure rather than falling off.Since one microstructure is generated in one vibration cycle,the process can be highly efficient using ultrafast(>1 kHz)tool vibration.A finite element analysis model is established to explore the process mechanics of EV-chiseling.Next,a mechanistic model of the microstructured surface generation is developed to describe the microstructures’aspect ratio dependency on the process parameters.Then,surface texturing tests are performed on copper to verify the efficacy of EV-chiseling.Uniformed micro ribs with a spacing of 1–10μm and an aspect ratio of 2–5 have been successfully textured on copper.Compared with the conventional EV-cutting that uses a forward-moving tool,EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 times.The experimental results also verify the accuracy of the developed surface generation model of microstructures.Finally,the effects of elliptical trajectory,depth of cut,tool shape,and tool edge radius on the surface generation of micro ribs have been discussed.

Optimal scheduling of a township integrated-energy system using the adjustable heat-electricity ratio model

With the expansion and implementation of rural revitalization strategies,there is a constant need for new energy sources for the construction of new townships.Consequently,integrated energy systems with the interconnection and interaction of multiple energy sources are developing rapidly.Biomass energy,a renewable green energy source with low pollution and wide distribution,has significant application potential in integrated energy systems.Considering the application of biomass energy in townships,this study established an integrated biomass energy system and proposed a model to optimize its operation.Lowest economic cost and highest clean energy utilization rate were considered as the objective functions.In addition,a plan was suggested to adjust the heat-electricity ratio based on the characteristics of the combined heat and power of the biomass.Finally,a simulation analysis conducted for a town in China was discussed,demonstrating that the construction of a township integrated-energy system and the use of biomass can significantly reduce operating costs and improve the energy utilization rate.Moreover,by adjusting the heat-electricity ratio,the economic cost was further reduced by 6.70%,whereas the clean energy utilization rate was increased by 5.14%.

Neutrophil-to-lymphocyte ratio and platelet-to-lymphocyte ratio:Markers predicting immune-checkpoint inhibitor efficacy and immune-related adverse events

We conducted a comprehensive review of existing prediction models pertaining to the efficacy of immune-checkpoint inhibitor(ICI)and the occurrence of immune-related adverse events(irAEs).The predictive potential of neutrophil-to-lymphocyte ratio(NLR)and platelet-to-lymphocyte ratio(PLR)in determining ICI effectiveness has been extensively investigated,while limited research has been conducted on predicting irAEs.Furthermore,the combined model incor-porating NLR and PLR,either with each other or in conjunction with additional markers such as carcinoembryonic antigen,exhibits superior predictive capabilities compared to individual markers alone.NLR and PLR are promising markers for clinical applications.Forthcoming models ought to incorporate established efficacious models and newly identified ones,thereby constituting a multifactor composite model.Furthermore,efforts should be made to explore effective clinical application approaches that enhance the predictive accuracy and efficiency.

Clinical study of neutrophil-to-lymphocyte ratio and platelet-tolymphocyte ratio in hypertriglyceridemia-induced acute pancreatitis and acute biliary pancreatitis with persistent organ failure

BACKGROUND The neutrophil-to-lymphocyte ratio(NLR)and platelet-to-lymphocyte ratio(PLR)are novel inflammatory indicators that can be used to predict the severity and prognosis of various diseases.We categorize acute pancreatitis by etiology into acute biliary pancreatitis(ABP)and hypertriglyceridemia-induced acute pancreatitis(HTGP).AIM To investigate the clinical significance of NLR and PLR in assessing persistent organ failure(POF)in HTGP and ABP.METHODS A total of 1450 patients diagnosed with acute pancreatitis(AP)for the first time at Shanxi Bethune Hospital between January 2012 and January 2023 were enrolled.The patients were categorized into two groups according to the etiology of AP:ABP in 530 patients and HTGP in 241 patients.We collected and compared the clinical data of the patients,including NLR,PLR,and AP prognostic scoring systems,within 48 h of hospital admission.RESULTS The NLR(9.1 vs 6.9,P<0.001)and PLR(203.1 vs 160.5,P<0.001)were significantly higher in the ABP group than in the HTGP group.In the HTGP group,both NLR and PLR were significantly increased in patients with severe AP and those with a SOFA score≥3.Likewise,in the ABP group,NLR and PLR were significantly elevated in patients with severe AP,modified computed tomography severity index score≥4,Japanese Severity Score≥3,and modified Marshall score≥2.Moreover,NLR and PLR showed predictive value for the development of POF in both the ABP and HTGP groups.CONCLUSION NLR and PLR vary between ABP and HTGP,are strongly associated with AP prognostic scoring systems,and have predictive potential for the occurrence of POF in both ABP and HTGP.

Enhanced entropy generation and heat transfer characteristics of magnetic nano-encapsulated phase change materials in latent heat thermal energy storage systems

The objective of the current study is to investigate the importance of entropy generation and thermal radiation on the patterns of velocity,isentropic lines,and temperature contours within a thermal energy storage device filled with magnetic nanoencapsulated phase change materials(NEPCMs).The versatile finite element method(FEM)is implemented to numerically solve the governing equations.The effects of various parameters,including the viscosity parameter,ranging from 1 to 3,the thermal conductivity parameter,ranging from 1 to 3,the Rayleigh parameter,ranging from 102 to 3×10^(2),the radiation number,ranging from 0.1 to 0.5,the fusion temperature,ranging from 1.0 to 1.2,the volume fraction of NEPCMs,ranging from 2%to 6%,the Stefan number,ranging from 1 to 5,the magnetic number,ranging from 0.1 to 0.5,and the irreversibility parameter,ranging from 0.1 to 0.5,are examined in detail on the temperature contours,isentropic lines,heat capacity ratio,and velocity fields.Furthermore,the heat transfer rates at both the cold and hot walls are analyzed,and the findings are presented graphically.The results indicate that the time taken by the NEPCMs to transition from solid to liquid is prolonged inside the chamber region as the fusion temperatureθf increases.Additionally,the contours of the heat capacity ratio Cr decrease with the increase in the Stefan number Ste.

Study on the Influence of Aspect Ratio on the Seismic Response and Overturning Resistance of a New Staggered Story Isolated Structure

The aspect ratio of the structure has a significant impact on the overall stability of the ultra high-rise building. A large aspect ratio of the structure increases the risk of overturning and reduces the lateral stiffness of the structure, leading to significant tensile and compressive stresses in the isolated bearings. To study the effect of aspect ratio on the seismic response and overturning resistance of a new staggered story isolated structure, three models with different aspect ratios were established. Nonlinear time-history analysis of the three models was conducted using ETABS finite element software. The results indicate that the overturning moment and overturning resistance moment of the superstructure in the new staggered story isolated structure increase with an increasing aspect ratio. However, the increase in the overturning moment of the superstructure is much greater than the increase in the overturning resistance moment, resulting in a decrease in the overturning resistance ratio of the superstructure with an increasing aspect ratio. The overturning moment and overturning resistance moment of the substructure in the new staggered story isolated structure decrease with an increasing aspect ratio. However, the decrease in the overturning moment of the substructure is greater than the decrease in the overturning resistance moment, leading to an increase in the overturning resistance ratio of the substructure with an increasing aspect ratio. The decrease in the overturning resistance ratio of the superstructure in the new staggered story isolated structure is much greater than the increase in the overturning resistance ratio of the substructure. Therefore, as the aspect ratio of the overall structure increases, the overturning resistance ratio of the superstructure and the entire structure decreases.

Integrating Virtual Reality and Energy Analysis with BIM to Optimize Window-to-Wall Ratio and Building’s Orientation for Age-in-Place Design at the Conceptual Stage

This study unfolds an innovative approach aiming to address the critical role of building design in global energy consumption, focusing on optimizing the Window-to-Wall Ratio (WWR), since buildings account for approximately 30% of total energy consumed worldwide. The greatest contributors to energy expenditure in buildings are internal artificial lighting and heating and cooling systems. The WWR, determined by the proportion of the building’s glazed area to its wall area, is a significant factor influencing energy efficiency and minimizing energy load. This study introduces the development of a semi-automated computer model designed to offer a real-time, interactive simulation environment, fostering improving communication and engagement between designers and owners. The said model serves to optimize both the WWR and building orientation to align with occupants’ needs and expectations, subsequently reducing annual energy consumption and enhancing the overall building energy performance. The integrated model incorporates Building Information Modeling (BIM), Virtual Reality (VR), and Energy Analysis tools deployed at the conceptual design stage, allowing for the amalgamation of owners’ inputs in the design process and facilitating the creation of more realistic and effective design strategies.

A gated recurrent unit model to predict Poisson’s ratio using deep learning

Static Poisson’s ratio(vs)is crucial for determining geomechanical properties in petroleum applications,namely sand production.Some models have been used to predict vs;however,the published models were limited to specific data ranges with an average absolute percentage relative error(AAPRE)of more than 10%.The published gated recurrent unit(GRU)models do not consider trend analysis to show physical behaviors.In this study,we aim to develop a GRU model using trend analysis and three inputs for predicting n s based on a broad range of data,n s(value of 0.1627-0.4492),bulk formation density(RHOB)(0.315-2.994 g/mL),compressional time(DTc)(44.43-186.9 μs/ft),and shear time(DTs)(72.9-341.2μ s/ft).The GRU model was evaluated using different approaches,including statistical error an-alyses.The GRU model showed the proper trends,and the model data ranges were wider than previous ones.The GRU model has the largest correlation coefficient(R)of 0.967 and the lowest AAPRE,average percent relative error(APRE),root mean square error(RMSE),and standard deviation(SD)of 3.228%,1.054%,4.389,and 0.013,respectively,compared to other models.The GRU model has a high accuracy for the different datasets:training,validation,testing,and the whole datasets with R and AAPRE values were 0.981 and 2.601%,0.966 and 3.274%,0.967 and 3.228%,and 0.977 and 2.861%,respectively.The group error analyses of all inputs show that the GRU model has less than 5% AAPRE for all input ranges,which is superior to other models that have different AAPRE values of more than 10% at various ranges of inputs.

Combining lymph node ratio to develop prognostic models for postoperative gastric neuroendocrine neoplasm patients

BACKGROUND Lymph node ratio(LNR)was demonstrated to play a crucial role in the prognosis of many tumors.However,research concerning the prognostic value of LNR in postoperative gastric neuroendocrine neoplasm(NEN)patients was limited.AIM To explore the prognostic value of LNR in postoperative gastric NEN patients and to combine LNR to develop prognostic models.METHODS A total of 286 patients from the Surveillance,Epidemiology,and End Results database were divided into the training set and validation set at a ratio of 8:2.92 patients from the First Affiliated Hospital of Soochow University in China were designated as a test set.Cox regression analysis was used to explore the relationship between LNR and disease-specific survival(DSS)of gastric NEN patients.Random survival forest(RSF)algorithm and Cox proportional hazards(CoxPH)analysis were applied to develop models to predict DSS respectively,and compared with the 8th edition American Joint Committee on Cancer(AJCC)tumornode-metastasis(TNM)staging.RESULTS Multivariate analyses indicated that LNR was an independent prognostic factor for postoperative gastric NEN patients and a higher LNR was accompanied by a higher risk of death.The RSF model exhibited the best performance in predicting DSS,with the C-index in the test set being 0.769[95%confidence interval(CI):0.691-0.846]outperforming the CoxPH model(0.744,95%CI:0.665-0.822)and the 8th edition AJCC TNM staging(0.723,95%CI:0.613-0.833).The calibration curves and decision curve analysis(DCA)demonstrated the RSF model had good calibration and clinical benefits.Furthermore,the RSF model could perform risk stratification and individual prognosis prediction effectively.CONCLUSION A higher LNR indicated a lower DSS in postoperative gastric NEN patients.The RSF model outperformed the CoxPH model and the 8th edition AJCC TNM staging in the test set,showing potential in clinical practice.

Serum cystatin C,monocyte/high-density lipoprotein-C ratio,and uric acid for the diagnosis of coronary heart disease and heart failure

BACKGROUND Coronary heart disease(CHD)and heart failure(HF)are the major causes of morbidity and mortality worldwide.Early and accurate diagnoses of CHD and HF are essential for optimal management and prognosis.However,conventional diagnostic methods such as electrocardiography,echocardiography,and cardiac biomarkers have certain limitations,such as low sensitivity,specificity,availability,and cost-effectiveness.Therefore,there is a need for simple,noninvasive,and reliable biomarkers to diagnose CHD and HF.AIM To investigate serum cystatin C(Cys-C),monocyte/high-density lipoprotein cholesterol ratio(MHR),and uric acid(UA)diagnostic values for CHD and HF.METHODS We enrolled 80 patients with suspected CHD or HF who were admitted to our hospital between July 2022 and July 2023.The patients were divided into CHD(n=20),HF(n=20),CHD+HF(n=20),and control groups(n=20).The serum levels of Cys-C,MHR,and UA were measured using immunonephelometry and an enzymatic method,respectively,and the diagnostic values for CHD and HF were evaluated using receiver operating characteristic(ROC)curve analysis.RESULTS Serum levels of Cys-C,MHR,and UA were significantly higher in the CHD,HF,and CHD+HF groups than those in the control group.The serum levels of Cys-C,MHR,and UA were significantly higher in the CHD+HF group than those in the CHD or HF group.The ROC curve analysis showed that serum Cys-C,MHR,and UA had good diagnostic performance for CHD and HF,with areas under the curve ranging from 0.78 to 0.93.The optimal cutoff values of serum Cys-C,MHR,and UA for diagnosing CHD,HF,and CHD+HF were 1.2 mg/L,0.9×10^(9),and 389μmol/L;1.4 mg/L,1.0×10^(9),and 449μmol/L;and 1.6 mg/L,1.1×10^(9),and 508μmol/L,respectively.CONCLUSION Serum Cys-C,MHR,and UA are useful biomarkers for diagnosing CHD and HF,and CHD+HF.These can provide information for decision-making and risk stratification in patients with CHD and HF.

Experimental Study of Local Scour Around Four Piles Under Different Attack Angles and Gap Ratios

In an effort to investigate and quantify the patterns of local scour,researchers embarked on an in-depth study using a systematic experimental approach.The research focused on the effects of local scour around a set of four piles,each subjected to different hydromechanical conditions.In particular,this study aimed to determine how different attack angles—the angles at which the water flow impinges on the piles,and gap ratios—the ratios of the spacing between the piles to their diameters,influence the extent and nature of scour.A comprehensive series of 35 carefully designed experiments were orchestrated,each designed to dissect the nuances in how the gap ratio and attack angle might contribute to changes in the local scour observed at the base of pile groups.During these experimental trials,a wealth of local scour data were collected to support the analysis.These data included precise topographic profiles of the sediment bed around the pile groups,as well as detailed scour time histories showing the evolution of scour at strategic feature points throughout the test procedure.The analysis of the experimental data provided interesting insights.The study revealed that the interplay between the gap ratio and the attack angle had a pronounced influence on the scouring dynamics of the pile groups.One of the key observations was that the initial phases of scour,particularly within the first hour of water flow exposure,were characterized by a sharp increase in the scour depth occurring immediately in front of the piles.After this initial rapid development,the scour depth transitioned to a more gradual change rate.In contrast,the scour topography around the piles continuously evolved.This suggests that sediment displacement and the associated sculpting of the seabed around pile foundations are sustained and progressive processes,altering the underwater landscape over time.The results of this empirical investigation have significant implications for the design and construction of offshore multi-pile foundations,providing a critical reference for engineers and designers to estimate the expected scour depth around such structures,which is an integral part of decisions regarding foundation design,selection of structural materials,and implementation of scour protection measures.

Effect of length-width ratio of rounded rectangle aquaculture tank in dual-diagonal-inlet layout on hydrodynamics

To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters of aquaculture tanks.In this paper,computational fluid dynamics(CFD)technology is adopted to study the flow field performance of aquaculture tanks with different L/B ratios(L:the length;B:the width,of aquaculture tank)and different jet direction conditions(lengthways jet and widthways jet).A three-dimensional numerical calculation model of turbulence in rounded rectangle aquaculture tanks in dual-diagonal-inlet layout was established.Jet directions are arranged lengthways and widthways,and the water flow velocity,resistance coefficient change,vorticity,etc.are analyzed under two working conditions.Results show that the flow field performance in aquaculture tank decreases with the increase of the L/B ratio.The flow field performed well when L/B was 1.0-1.3,sharply dropped at 1.4-1.6,and poor at 1.7-1.9.The results provided a theoretical basis for the design and optimization in flow field performance of the industrialized circulating aquaculture tanks.

Prediction Model-based Multi-objective Optimization for Mix-ratio Design of Recycled Aggregate Concrete

The prediction model for mechanical properties of RAC was established through the Bayesian optimization-based Gaussian process regression(BO-GPR)method,where the input variables in BO-GPR model depend on the mix ratio of concrete.Then the compressive strength prediction model,the material cost,and environmental factors were simultaneously considered as objectives,while a multi-objective gray wolf optimization algorithm was developed for finding the optimal mix ratio.A total of 730 RAC datasets were used for training and testing the predication model,while the optimal design method for mix ratio was verified through RAC experiments.The experimental results show that the predicted,testing,and expected compressive strengths are nearly consistent,illustrating the effectiveness of the proposed method.

Carbonation of Pure Minerals in Portland Cement:Evolution in Products as a Function of Water-to-solid Ratio

Minerals in Portland cement including tricalcium silicate(C_(3)S),β-dicalcium silicate(β-C_(2)S),tricalcium aluminate(C_(3)A),and tetracalcium ferroaluminate(C_(4)AF),show a significantly different activity and product evolution for CO_(2)curing at various water-to-solid ratios.These pure minerals were synthesized and subject to CO_(2)curing in this study to make an in-depth understanding for the carbonation properties of cement-based materials.Results showed that the optimum water-to-solid ratios of C_(3)S,β-C_(2)S,C_(3)A and C_(4)AF were 0.25,0.15,0.30 and 0.40 for carbonation,corresponding to 2 h carbonation degree of 38.5%,38.5%,24.2%,and 21.9%,respectively.The produced calcite duringβ-C_(2)S carbonation decreased as the water-to-solid ratio increased,with an increase in content of metastable CaCO_(3)of vaterite and aragonite.The thermodynamic stability of CaCO_(3)produced during carbonation was C_(3)A>C_(4)AF>β-C_(2)S>C_(3)S.The carbonation degree of Portland cement was predicted based on the results of pure minerals and the composition of cement,and the error of predicted production of CaCO_(3)was only 1.1%,which provides a potential method to predict carbonation properties of systems with a complex mineral composition.