Electrochemical Behavior and Determination of Trifluoperazine at Decanethiol Self-Assembled Monolayer Modified Gold Electrodes

The electrochemical behavior of trifluoperazine at decanethiol self-assembledmonolayer (SAM) modified gold electrodes (i. e. C_(10) H_(21) SH/Au) has been studied,Trifluoperazine can effectively accumulate on C_(10) H_(21) SH/Au electrodes and generate asensitive anodic peak at about 0.63 V (vs. SCE) in 0.05 mol/L pH 9.4 Na_2 B_4 O_7 buffer solution.Under the selected conditions, the anodic peak current was linear to trifluoperazine concentrationin the range of 5.0 X 10^(-7)-3.O X 10^(-3) mol/Lwith correlation coefficient of 0.997, thedetection limit was 3.0 X 10^(-5) mol/L. This method was applied to the determination oftrifluoperazine in drug samples and the recovery was 97.3%-104.0% It was found that sodium dodecylsulfate (SDS) could make the anodic peak current increase. In the presence of SDS, the peak at about0.63 V turned into two peaks, resulting from the change of the electrochemical mechanism.

The Molecular Recognition Characteristics of ω-MercaptoMethoxy Poly(Ethylene Glycol) Self-assembled Monolayer at Gold Electrode and the Detection of Dopamine in Serum

Self assembled monolayers (SAMs) of to-mercapto methoxy poly(ethylene glycol)(MPEG) on gold electrode were used as a means to detect dopamine. Dopamine (DA) had good response at the MPEG film electrode and ascorbic acid (AA) was repelled from the SAMs. TheMPEG film is a biocompatible film, there was no adsorption of biosample and no inactivation atelectrode surface when it was used to detect DA in biosamples.

QCM and EC-SPR Studies of Cytochrome c Self-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance（QCM） and cyclic voltammetry（CV） were used to characterize the monolayer of cytochrome c（Cyt c）,which was adsorbed on gold film modified with alkanethiol mixed monolayer.A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt c is 34%,which suggests that the orientation is a main factor affecting the electroactivity of Cyt c.Moreover,surface plasmon resonance（SPR） measurement combined with CV ＂in situ＂ was used to investigate the conformational change of Cyt c in the redox process.Besides,Au nanoparticles（Au NPs） were adsorbed on the surface of Cyt c.The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode,and SPR result suggests Au NPs enhance SPR signal.

A New Thionine Modified Electrode by Anchorage to Bi-(2-aminoethyl)-aminodithiocarboxyl Acid Self-assembled Monolayers through Coordination with Cu^(2+#)

A new method for preparing chemically modified gold electrode by anchoring thionine to self-assembled bi - (2 -aminoethyl) -aminodithiocarboxyl acid(BANTC) monolayers through coordination with Cu2+ is described. This thionine modified electrode exhibits two-new redox couples.Two protons were involved in the electrochemical process undergone by the couple I in the pH range of 5.0-10.0. The apparent surface electron transfer rate constant is about 0.050s-1.

A Gold Electrode QCM Study on the Self-Assembling Process of Thioglycollic Acid in Aqueous Solution

In this letter, the self-assembling process of thioglycollic acid on gold in aqueous solutions was studied by QCM technique. Frequency information suggests bilayer or multilayer adsorbate formation in 0.5 mol/L HCl solution but only monolayer one in 0.5 mol/L KOH solution. This phenomenon is explained by hydrogen bond effect.

Two Types of Potential Oscillation During the Reduction of Dichromate on Gold Electrode in H2SO4 Solution

Two different types of potential oscillations have been identified for the first time during dichromate reduction on a gold electrode in a solution of dilute sulfuric acid. One occurs before hydrogen evolution due to the formation and dissolution of passivating films of low-valence chromium oxides, and the other generates, accompanying periodic hydrogen evolution, from the coupling of electrochemical reactions with diffusive and convective mass transport. More interestingly, these two types of oscillations correspond to two crossing loops in the cyclic voltammogram （CV）. Such a relation of oscillations with crossed CVs will provide a new way to find electrochemical oscillatory systems systematically and rapidly.

Seed-mediated growth of gold nanoparticles using self-assembled monolayer of polystyrene microspheres as nanotemplate arrays

Arrays of noble metal nanoparticles show potential applications in （bio-）sensing, optical storage, surface-enhanced spectroscopy, and waveguides. For all such potential devices, controlling the size, morphology, and interparticle spacing of the nanoparticles is very important. Here, we combine seed-mediated growth with nanosphere lithography to study the controllable growth of gold nanoparticles （Au NPs）, in which the self-assembly monolayer of polystyrene （PS） on a silicon surface is used to guide the modification of allaunesilanes and the subsequent adsorption of gold seeds; seed-mediated growth is applied to controlling the morphology and size of Au NPs. The size of adsorption region （determining the number of adsorbed gold seeds） is controlled by etching PS microspheres with oxygen plasma or annealing PS microspheres at the glass transition temperature. The size and morphology of the Au NPs are controlled by changing growth conditions. In such a way, we have achieved the dual control of the obtained Au NPs. Preliminary results show that this strategy holds a great promise. This approach can also be extended to a wide range of materials and substrates.

The Study of Electrochemical Behavior of Dopamine at Nano-gold Modified Carbon Fiber Electrode

The electrochemical behaviors (cyclic voltammetry, CV and different pulse voltammetry, DPV) of dopamine (DA) were studied in this paper. The result indicated that the oxidation of dopamine was controlled by diffusion and adsorption simultaneously at nano-gold (NG) modified carbon fiber electrode (CFE). This modified electrode can separate the peak potentials of dopamine and ascorbic acid (AA). The peak current of DA in DPV curve was found to be linearly proportional to the concentration of DA at range of 2.0?0-6～1.5?0-5mol/L and 1.0?0-5～5.0?0-4mol/L, respectively.

Cyclic Voltammetry Determination of Epinephrine with a Nano-gold Modified Glassy Carbon Electrode in the Presence of High Concentration Ascorbic Acid

Nano-gold (NG) modified glassy carbon electrodes (GCEs) were used for determination of epinephrine (EP) in the presence of high concentration ascorbic acid (AA) by cyclic voltammetry (CV). This modified electrode can not only catalytically oxidize EP and AA, but also separate the catalytic peak potentials of EP and AA by about 183.5 mV. In pH = 7.0 ogisogate byffer solution, the linear range of epinephrine was 5 106 ~ 1 ?10-4 mol/L.

Anion Adsorption on an Au Colloid Monolayer Based Cysteamine-Modified Gold Electrode

Anion adsorption behavior on Au colloid surface was investigated in virture of depositing monolayers of Au colloid on the self-assembled monolayers of cysteamine on a gold electrode. Po- tential-dependent anion adsorption-desorption waves via the nonfaradaic current were obtained by means of cyclic voltammetry at Au coltoid-modified gold electrodes in the potential range of -2 00-600 mV. The adsorption sequence in the order of adsorption peak potentials (Epa) is OH- >citrate3 ->H2PO4- >Cl->SO42->ClO4->NO3-. Among them, citrate3- exhibited an en- tirely irreversible adsorption. A rise in temperature can increase the rates of adsorption-desorp- tion and improve the reversibility of the adsorption-desorption of Cl-, SO42-, ClO4-, NO3- and H2PO-4. The adsorption peak potentials shifted more negatively for Ca. 63 mV as the anion con- centrations were increased by a decade factor. The change of pH from 7 to 1 slightly affected the adsorption peak potentials of Cl- and NO3-. Au colloids with a smaller size (16 nm) gave rise to a better reversibility of the adsorption-desorption process and lower adsorption currents. The ex- perimental results of citrate ions adsorption on Au colloid surface show that Au colloids with a smaller size prepared by sodium citrate method exhibited a higher stability in the solution in com- parison to those with larger sizes because of its higher ratio of charge/mass. In other words, the smaller gold nanoparticles are covered with citrate ions monolayer that can also be formed at larg- er gold nanoparticles by means of electrochemical scan.

Determination of ppt Level Chromium(VI) Using the Gold Nano-Flakes Electrodeposited on Platinum Rotating Disk Electrode and Modified with 4-Thiopyridinium

The nano-gold layer formed on the platinum rotating disk electrode (nano-Au/Pt-RD) inherited the catalytic property for Cr(VI) reduction from platinum surface and owned the good features of nano-gold such as insensitivity with hydrogen ion, high surface area, augmenting diffusion of Cr(VI) and ability for self-assembling with 4-pyridine-ethanethiol (PET) through Au←S linkages, to form PET/nano-Au/Pt-RD electrode capable of accumulating Cr(VI) from sample. The obtained PET/ nano-Au/Pt-RD electrode showed an extreme sensitivity to Cr(VI). By using this electrode, 1.09 ng·L﹣1 was the detection limit of differential pulse adsorptive cathodic stripping voltammetry for Cr(VI) with the accumulation time of only 2 min. Moreover, this electrode was reproducible with 3.5% RSD for 30 times of Cr(VI) accumulating and stripping. In addition, this electrode was also selective for Cr(VI) determination, which was not almost interfered by other inorganic ions.

Direct Electrochemical Evidence of the Dissociation and Adsorption Behavior of Acetonitrile at Gold Electrodes by Ultrafast Voltammetry

Ultrafast cyclic voltammetry was used to study the redox behavior of a gold electrode in acetonitrile. The direct electrochemical evidence of the dissociation and adsorption behavior of acetonitrile at gold electrodes was found. It could be stated that two consecutive redox paths are involved, each with a special adsorption state acting as the reaction intermediate. The mean value, obtained of the electron-transfer rate constant of the second path, was 1.3 × 10^5 s^-1 with a standard deviation of 0.24 × 10^5 s^-1.

Voltammetric determination of uric acid by using gold nanotubule electrode

Gold nanotubule membranes were prepared by using electroless deposition of gold within the pores and surfaces of polycarbonate track-etched membranes. And the gold nanotubule membrane was used as an electrode for determination of uric acid in urine samples for the first time. In Britton–Robinson buffer of pH 4.56, uric acid exhibited well-defined differential pulse voltammograms. And the interference between coexistent ascorbic acid and uric acid was overcome owing to the attractive ability of the gold nanotubule electrode to yield a large anodic peak difference ca. 0.404 V (vs. SCE). The proposed method was then applied to the determination of uric acid in urine without any pretreatment.

Gold Nanoparticle-based Layer-by-Layer Enhancement of DNA Hybridization Electrochemical Signal at Carbon Nanotube Modified Carbon Paste Electrode

Colloid gold nanoparticle-based layer-by-layer amplification approach was applied to enhance the electrochemical detection sensitivity of DNA hybridization at carbon nanotube modified carbon paste electrodes （CNTPEs）. Streptavidin was immobilized onto the surface of CNTPEs, and the conjugation of biotin labeled target oligonucle,otides to the above immobilized streptavidin was performed, followed by the hybridization of target oligonucleotides with the gold nanoparticle-labeled DNA probe and then the layer-by-layer enhanced connection of gold nanoparticles, on which oligonucleotides complementary to the DNA probe were attached, to the hybridization system. The differential pulse voltammetry （DPV） signal of total gold nanoparticles was monitored. It was found that the layer-by-layer colloidal gold DPV detection enhanced the sensitivity by about one order of magnitude compared with that of one-layer detection. One-base mismatched DNA and complementary DNA could be distinguished clearly.

Studies on the Gold-Coated Electrode with Grid

Introduction Thin-layer spectroelectrochemical method has many unique advantages, therefore this method has been widely applied and developed. Recently light transparent thinlayer spectroelectrochemical cells with various types of structures have been reported at home and abroad with gold or platinum minigrids as the working electrode in most of

Preparation and Characterization of Gold Thin Film Electrode Modified by Microbe

A novel method based on microbe modification has been employed to prepare gold thin film electrode. The preparation method is simple and the electrode obtained is stable and very sensitive in determining heavy metal ions. The quantitation limit of Cu2+ is 0.05 ng/mL.

The Self-Assembling Growth of Copper Nanowires for Transparent Electrodes

Long(15-40 μm), thin(diameter of 20 ± 5 nm), and well-dispersed CuNWs Cu nanowires were prepared. The high-resolution TEM and selected area electron diffraction showed that the CuNWs were single-crystalline. To investigate the growth mechanism, we examined the microstructure of these CuNWs at different reaction time. It was found that the CuNWs were actually formed through the self-assembling of Cu nanoparticles along the [110] direction. The transparent electrodes fabricated using the CuNWs achieved a high transparency of 76 % at 31±5 Ω/□.

Electrochemical Determination of Melamine on Static Mercury Drop Electrode and on Gold Nano Particle Modified Carbon Paste Electrode

An electrochemical method was developed for the determination of melamine (2,4,6 triamino- 1,3,5-triazine) on static mercury drop electrode (SMDE) and on gold nano particle modified carbon paste electrode. Interaction of melamine with Cu2﹢ ion was investigated and the decrease of Cu stripping peak was measured for the determination of melamine using SMDE. Oxidation property of melamine was improved using gold nano particle modified carbon paste electrode. Direct determination of melamine was proposed from the oxidation peak with three sigma detection limit of 0.43 μML﹣1. Recovery in milk powder sample has shown good recovery of melamine using the modified carbon paste electrode.

Reaction of erythromycin with dissolved oxygen on gold nanoparticle-modified glassy carbon electrodes

Cyclic voltammetry was used to investigate the reaction of erythromycin （EM） with dissolved oxygen on gold nanopartiele-modified electrodes prepared via electrodeposition. A well-defined reduction peak at -0.420 V and a reoxidation peak at -0.055 V were observed. With the addition of EM into the NaOH solution containing dissolved oxygen, the oxidation peak at -0.055 V was still indiscernible. However, a new oxidation peak at 0.200 V appeared, which suggests the interaction between EM and dissolved oxygen. Therefore, this method can be used for the analysis of EM in tablets. The present method is simple, reproducible, and does not require complex analytical instruments.

Assessment of Defects and Collapsed Sites in Self-Assembled Alkanethiol Monolayer on Gold by Cyclic Voltammetry and A.C.Impedance

Self-assembly of octadecyl mercaptan on gold was investigated by cyclic voltammetry(CV) and electrochemical impedance spectroscopy (EIS). Results of CV experiments show thatthere are no structUral defects exposed directly to the redox couple in solution, but EISexperiments indicate that collapsed sites exist in the monolayer. A method to estimate the degree ofdisorder in the Au/thiol monolayer surface is proposed by using admittance plane plot.