Characterization and Performance of Magnesium Doped Bioactive Glass Nanoparticles

The bioactive glass and related biomaterials have become increasingly popular, and have also attracted the research interest of many researchers in recent years due its special performance and tissue engineering application. In this study, to create a material with a variety of properties Mg doped hollow bioactive glass (Mg-HBG) of 80SiO2-5P2O5-10CaO-5MgO system had been produced by using a sol-gel method. The porous structure nanoparticles were specifically made by employing the cetyltrimethylammonium bromide (CTAB) as a surfactant. Magnesium was selected as a doped material with HBG, because it is the most existing cations in the human body which helps for bone metabolism as well as it has antibacterial property. Based on different investigations resulted nanoparticle with the inclusion of the lower molar fractions magnesium has good tested result. For a drug model vancomycin hydrochloride (VAN) was used in this study and it has also good antibacterial activity effect. These findings help the possibility of using Mg-HBG nanoparticles to treat infectious bone abnormalities by demonstrating their compatibility with antibiotics, drug loading and release behavior.

Preparation and bioactivity of sol-gel macroporous bioactive glass

Bioactive glass is well known for its ability of bone regeneration, and sol-gel bioactive glass has many advantages compared with melt-derived bioactive glass. 3-D scaffold prepared by the sol-gel method is a promising substrate material for bone tissue engineering and large-scale bone repair. Porous sol-gel glass in the CaO-SiO2-P205 system with macropores larger than 100 μm was prepared by the addition of stearic acid as a pore former. The diameter of the pore created by the pore former varied from 100 to 300 μm. The formation of a hydroxyapatite layer on the glass was analyzed by studying the surface of the porous glass by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Raman spectra after they had been immersed in simulated body fluid （SBF） for some time, and the porous glass shows good bioactivity.

Sol-gel Derived TiO_2-Bioactive glass-Hydroxyapatite Bioactive Coating on Titanium Alloy Substrate

Coating the hydroxyapatite （HA） on the titanium alloy surface can obtain a bioactive implant with high mechanical properties However, the bonding force between the titanium alloy and the HA was low due to their different coefficient of thermal expansion （CET）. Preparing the multi-layer coating with alleviated thermal stress on titanium alloy substrate is few reported. Fabrication of a TiO2-bioactive glass （BG）-HA bioactive coating was proposed to solve this problem. A particular TiO2 surface was prepared on the titanium alloy substrate by micro-arc oxidation treatment. The BG and HA coating were coated onto the TiO2 surface in turn by using a sol-gel method. The microstructure, surface morphology and phase composition of the coatings were analyzed. The bonding force of coatings was investigated by the nick apparatus. In vitro dissolution was performed by soaking the TiO2-BG-HA coated samples into the simulated body fluid for various periods. Micro-structural observations indicated that no delamination and crack occurred at the interface of HA/BG and BG/TiO2. The bonding between the substrate and coating consists of the mechanical interaction and the chemical bonding. The bonding force could reach about 45 N. The TiO2-BG-HA coating displayed the excellent forming ability of bone-like apatite when it was soaked into the simulated body fluid. This work suggests an innovative way to reduce the internal stress among coatings through varying BG composition to adjust its CTE, so as to enhance the bonding force.

Preparation of Machinable Bioactive Glass-ceramics by Sol-gel Method

The purpose of this research was to prepare machinable bioactive glass-ceramics by sol-gel method. A multi-component composite sol with great uniformity and stability was first prepared by a 2-step method. The composite sol was then transformed into gel by aging under different temperatures. The gel was dried finally by super critically drying method and sintered to obtain the machinable bioactive glass-ceramics. Effect of thermal treatment on crystallization of the glass-ceramics was investigated by X-ray diffraction （ XRD ） analysis. Microstructure of the glass- ceramics was observed by Scanning Electron Microscopy （SEM） and the mechanism of machinability was discussed. Phlogopite and hydroxylapatite were identified as main crystal phases by XRD analysis under thermal treatment at 750℃ and 950℃ for 1.5 h separately. The relative bulk density could achieve 99% under 1050℃ for 4 h. Microstructure of the glass-ceramics showed that the randomly distributed phlogopite and hydroxylapatite phases were favorable to the machinability of the glass-ceramics. A mean bending strength of about 160- 180 MPa and a fracture toughness parameter KIC of aboat 2.1-2.3 were determined for the glass-ceramics.

Sol-Gel Synthesis of SiO₂-CaO-Na₂O-P₂O₅Bioactive Glass Ceramic from Sodium Metasilicate

Bioactive glass ceramic with SiO2-Ca2O-Na2O-P2O5 composition was prepared by the sol-gel method using sodium metasilicate (Na2SiO3) as silica source. The monolith obtained was sintered at 1000?C for 2 hours after which X-ray diffraction (XRD) analysis showed presence of combeite (Na2Ca2Si3O9) as the crystalline phase. In vitro bioactivity test conducted on the material using simulated body fluid (SBF) showed the formation of carbonated hydroxyapatite on its surface. The material during the SBF test was observed to transform from a mechanically strong crystalline phase Na2Ca2Si3O9 to an amorphous phase after incubation for 14 days indicating that the material was biodegradable. Scanning electron microscopy (SEM) was used to investigate the surface morphology, while Fourier transform infrared (FTIR) spectroscopy facilitated the confirmation of hydroxyapatite (HA) formation. The monolith material obtained may be a good candidate for application in tissue engineering scaffolds.

Coating of bioactive glass on magnesium alloys to improve its degradation behavior: Interfacial aspects

The preferable mechanical properties of Mg alloys along with excellent compatibility with human bone have established their applicability as implant biomaterials.However,a higher corrosion/degradation rate of Mg alloys in body fluids limits its biomedical applications.In this direction,surface modification and coating are explored as appropriate strategies to mode the degradation rate of Mg alloys.The constituents of bioactive glass(BG)provide strength,bio-inertness and bone bonding capability.Hence,researchers have explored the coating of BG on Mg alloys and investigated chemical,mechanical and biological properties of the coated alloys.In this review,we have made an attempt to compile the literature works done on the coating of BG on Mg alloys and its features.Underlying interfacial aspects of the coated substrates towards the degradation behavior are highlighted.The way forward to further improve the coating characteristics of BG coated Mg alloys are remarked.

Design of multilayer hybrid sol-gel coatings with bifunctional barrier-bioactive response on the Elektron 21 magnesium alloy for biomedical applications

The present study aims to develop multilayer barrier-bioactive hybrid sol-gel coatings from a mixture of the silane precursors tetraethylorthosilicate(TEOS)and glycidoxypropyltriethoxysilane(GPTMS)deposited on the Elektron 21 magnesium alloy.The purpose of the inner layer(barrier coating)was to provide corrosion protection to the magnesium alloy,whereas the outer layer(bioactive coating)was doped with different Ca and Mg contents to produce a bioactive material.The coatings were characterised using scanning electron microscopy(SEM)and their corrosion behaviour was evaluated by anodic polarisation and electrochemical impedance spectroscopy after immersion in simulated body fluid(SBF)at 37±0.5°C.The experimental results showed that the multilayer coatings increased the corrosion resistance of the alloy up to three orders of magnitude during immersion in SBF solution.On the other hand,the presence of Ca and Mg in the bioactive coating promoted the growth of apatite-like phases.However,an increment of salt content favoured the formation of porous coatings,which allowed the access of the electrolyte to the substrate leading to their rapid deterioration.Despite the latter,this research endorses the premise that the TEOS-GPTMS hybrid system represents a promising alternative to produce bifunctional barrier-bioactive coatings.

Preparation and Characterization of the System SiO_2-CaO-P_2O_5 Bioactive Glasses by Microemulsion Approach

The system of SiO2-CaO-P2O5 bioactive glasses （BG） were successfully synthesized by microemulsion approach. X-ray diffraction （XRD）,scanning electron micro scopy（SEM） and energy dispersive X-ray （EDX） analyses, transmission electron microscopy（TEM）,Fourier transform infrared spectroscopy （FTIR）, BET N2 gas adsorption analysis techniques were utilized in order to evaluate the phase composition, dimension, morphology, interconnectivity of pores and particle size of the synthesized BG respectiveely. The biocompatibility of BG was assessed by using dimethylthiazol diphenyl tetrazolium bromide （MTT）.The BG scaffolds were implanted in rabbit mandibles and studied histologically.The results showed that the BG with a particle size less than 100 nm was prepared successfully. The measured BET specific surface area and pore volume was 113.9 m2/g and 0.28 cm3/g respectively. Cell cultures revealed that BG has been shown to have good biocompatibility and is also beneficial to the survival of Schwann cells, which can promote cell proliferation in vivo assay indicating that the BG can promote osteoconductivity.

Bioactivity of bioresorbable composite based on bioactive glass and poly-L-lactide

Bioactive and bioresorbable composite was fabricated by a solvent evaporation technique using poly-L-lactide(PLLA) and bioactive glass (average particle size: 6.8 μm). Bioactive glass granules are homogeneously distributed in the composite with microcrack structure. The formation of hydroxyapatite(HA) on the composite in simulated body fluid(SBF) was analyzed by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), X-ray diffraction(XRD), and Raman spectra. Rod-like HA crystals deposit on the surface of PLLA/bioactive glass composite after soaking for 3 d. Both rod-like crystals and HA layer form on the surface for 14 d in SBF. The high bioactivity of PLLA/bioactive glass composite indicates the potential of materials for integration with bone.

Biodegradation behavior of polymethyl methacrylate−bioactive glass 45S5 composite coated magnesium in simulated body fluid

The biodegradation behavior of Mg,coated by polymethyl methacrylate as well as polymethyl methacrylate(PMMA)−bioactive glass(BG)composite was investigated.Electrophoretic deposition and dip coating techniques were adopted to prepare composite coating using a suspension of different percentages of the above two chemical materials.The deposited coatings were characterized using SEM,EDS,FTIR,and water contact angle measurements.Biodegradation behavior study of the coated Mg was performed using linear polarization,impedance spectroscopy,and immersion tests in simulated body fluid.The compact and homogeneous composite coating was developed as evidenced by electron microscopy results.The water contact angle measurement showed a 44°increase in the contact angle of the composite coated Mg compared to the uncoated one.The composite coating was covered by a bone-like hydroxyapatite layer after 336 h,indicating that the coating has an excellent in vitro bioactivity.The electrochemical testing results confirmed a significant reduction,96.9%,in the biodegradation rate of Mg coated with the composite prepared from 45 g/L PMMA+3.5 g/L 45S5 GB suspension compared to that of the uncoated one.Therefore,the composite coated Mg can be proposed as a promising material for biodegradable implant application.

Synthesis and structural characterization of macroporous bioactive glass

Porous sol-gel glass of CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by adding stearic acid as pore former when the sintering was carried out at 700 ℃ for 3h.The sol-gel porous glass shows an amorphous structure. The diameter of the pore created by pore former varies from 100 to 300 μm, and macroporous glass has a narrow and small pore size distribution in mesoporous scale. The porosity and pore size of macroporous bioactive glass can be controlled.

Chronology of Bioactive Glass Development and Clinical Applications

The key research and development steps for bioactive glass (45S5 Bioglass) are documented from the date of discovery in 1969 through FDA approvals of the first dental, ENT, maxillo-facial and orthopedic clinical products. Understanding the mechanisms and quantifying the rapid surface reactions to form a bone-bonding hydroxyl-carbonate apatite (HCA) layer on the bioactive glass in contact with living bone was a vital part of the early development of this class of biomaterials. A key later discovery was enhanced osteogenesis and in situ bone regeneration by controlled release of ionic dissolution products from the bioactive glass particulates that leads to up-regulation and activation of seven families of genes, a process called osteostimulation.

Broad-Spectrum Antibacterial Characteristics of Four Novel Borate-Based Bioactive Glasses

Bioactive glasses have been developed for medical applications in the body for bone and tissue repair and regeneration. We have developed a borate-containing bioactive glass (13-93B3, referred to as B3), which is undergoing clinical trials to assess its wound-healing properties. To complement the healing properties of B3, metal ion dopants have been added to enhance its antimicrobial properties. Bioactive glasses doped with silver, gallium or iodine ions were found to have broad spectrum antimicrobial effects on clinically relevant bacteria including MRSA. While the B3 glass alone was sufficient to produce antibacterial effects on select bacteria, adding dopants enhanced the broad-spectrum antibacterial properties: Live-Dead staining fluorescence microscopy suggests cell membrane integrity is disrupted in gram positive bacteria exposed to the glass compounds, but not gram negative bacteria, indicating multiple mechanisms of action for each glass formulation.

Development of Modified Glasses by Transparent, Functional Hybrid Sol-Gel Nano-Ceramic Coatings, a Comparative Study

This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.

Anti-biofilm Effect of Glass Ionomer Cements Incorporated with Chlorhexidine and Bioactive Glass

The effect of glass ionomer cement and resin-modified glass ionomer cement incorporated with chlorhexidine and bioactive glass on antimicrobial activity and physicochemical properties were investigated. The experimental results showed that groups incorporated with 1% chlorhexidine exhibited a significant reduction of optical density values of the bacterial suspension and increased the degradation of Streptococcus mutans biofilm. However, groups incorporated with 10% bioactive glass did not affect the optical density values and the biofilm formation. The mechanical properties of the materials and the polymerization were not influenced by the addition of chlorhexidine. Nevertheless, the compressive strength was lower when the materials were incorporated with bioactive glass. It can be concluded that glass ionomer cements incorporated with chlorhexidine can maintain its mechanical properties as well as reduce early S mutans biofilm formation. Controlled release/sustained release technology may be required to optimize the antibacterial activity of glass ionomer cements incorporated with bioactive glass.

Stress Corrosion Crack Growth Behavior of Titanium Alloy/Bioactive Glasses Sandwiches in Simulated Human Physiological Environment

Based on a series of newly developed bioactive glasses having suitable thermo-mechanical properties to allow application as fixation agents between bone and titanium alloy biomedical implants, the stress corrosion crack growth (SCCG) behavior of their interfaces with Ti6AI4V was investigated in simulated body fluid (SBF) with the objective of discerning the salient mechanisms of crack advance and to assess the reliability of the bonds. Results indicated that crack growth rates in Ti6AI4V/glass/Ti6AI4V sandwich specimens were nearly the same as or slightly lower than those in the bulk glasses at comparable stress intensities; indeed, cracks would prefer to propagate off the interface, suggesting that the Ti6AI4V/glass interface has relatively good crack-growth resistance. Mechanistically, interfacial crack growth appears to be controlled by the classic stress corrosion mechanisms for silicate glasses, with no discernible effect of bioactivity on the SCCG behavior being observed.

Enhanced Healing of Full-thickness Diabetic Wounds Using Bioactive Glass and Yunnan Baiyao Ointments

In order to accelerate the chronic wounds healing, we investigated the healing effects of bioactive glass and Yuunan baiyao ointments in streptozotocin-induced diabetic rats. The ointments were prepared by mixing 45S5 bioactive glass powder （16% weight） with Vaseline and different weight percentages of Yurman baiyao. Full-thickness defect wounds were created on the back of 130 SD rats and were randomly divided into 8 groups. The wound healing rates were calculated at 4, 7, 10, 14 and 21 days after surgery. The samples were harvested for further observations. Considering the wound closure rate, group 6 （with 5% Yuunan baiyao） has better wound healing performance than other diabetic groups. The lower inflammatory response was observed by gross observation and confirmed by the results of H＆E staining and TEM observation. Besides, the proliferation of fibroblasts, the formation of granulation tissue, as well as the vascularization, were improved in group 6 compared to other diabetic groups. All results suggest that bioactive glass and Yunnan baiyao ointments can accelerate the recovery of diabetes-impaired skin wounds, and comparing to other diabetic groups, group 6 （with 5% Yunnan baiyao） has better healing effect.

Osteogenesis of MC3T3 Preosteoblasts on 3D Bioactive Peptide Modified Nano-Macroporous Bioactive Glass Scaffolds

Biointerface design that targets osteogenesis is a growing area of research with significant implications in biomedicine. Materials known to either support or stimulate osteogenesis are composed of a biomimetic ceramic material, such as bioactive glass. Bioactive glass is osteoproductive, and the potential for osteoproductivity can be enhanced by the addition of proteins or other additives designed to alter functionality. In addition, soluble growth factors are often added to osteogenic culture on bioactive glasses, further intensifying the effects of the material. In this paper, synthetic peptide combinations, covalently bound to a three-dimensional bioactive glass network, are used to mimic the effects of the whole fibronectin and bone morphogenetic proteins (BMP) 2 and 9. Peptide-silanes possessing critical binding sequences from each of these proteins are synthesized and used to decorate the surface of three-dimensional (3D) nano-macroporous bioactive glass. MC3T3 preosteoblast cells are then assessed for differentiation on the materials in the absence of soluble differentiation cues. MC3T3 preosteoblasts undergo enhanced differentiation on the peptide-silane samples over the standard nano-macroporous bioactive glass, and the differentiation capacity of the cells exposes only to peptide-silane surfaces approaches that of cells grown in chemical differentiation induction media.

Preparation of poly-L-lactide/bioactive glass composite and evaluation of cytotoxicity in vitro

Bioactive and bioresorbable composite materials were fabricated from poly-L-lactide and bioactive glass (average particle size 6.8 μm) by a solvent evaporation technique.Cellular cultivation in vitro and MTT assay were conducted for evaluating the influence on morphology,growth and proliferation of cultured fibroblasts.The results of cytotoxicity testing show that cells cultured in extracts of PLLA/BG and on the surface of composites demonstrate normal growth and proliferation.The bioactive glass in PLLA composite facilitates both adhesion and proliferation of rat fibroblasts on PLLA/bioactive glass composite film.