Objective To evaluate the use of titanium mesh reconstruction after sternal tumor resection. Methods From January 2007 to January 2011, 14 patients with sternal tumors were admitted into Peking Union Medical Hospital....Objective To evaluate the use of titanium mesh reconstruction after sternal tumor resection. Methods From January 2007 to January 2011, 14 patients with sternal tumors were admitted into Peking Union Medical Hospital. The clinical characteristics, surgical resection, and technique of reconstruction were reviewed. Results Of the 14 patients, 3 had a metastatic sternal tumor, the primary sites of which were as follows: hepatic carcinoma in one case (metastasis 19 years after operation), breast carcinoma in another case (metastasis 5 years after operation), and renal carcinoma in the other case (found simultaneously). Two patients showed local involvement of the sternum: 1 had thymic carcinoma, and the other had myofibrosarcoma. The remaining 9 patients had primary tumors: 4 were osteochondroma, 3 chondrosarcoma, 1 eosinophilic granuloma, 1 non-Hodgekin's lymphoma. En bloc resection of the sternal tumor was performed in all the 14 patients. The defect was repaired with the titanium mesh adjusted to the shape of the defect and fixed with the stainless steel wire. Eleven patients were followed up for a period from 2 months to 4 years, during which no translocation or broken of the titanium mesh was observed. Conclusions Radical en bloc excision remains the treatment of choice for sternal tumors. Sternum defect reconstruction using titanium mesh as a rigid replacement proves appropriate and effective.展开更多
<strong>Rationale:</strong> The three-dimensional (3D) computer-made titanium mesh is widely used in the skull repair for those patients receiving decompression of the bone flap. It can restore normal anat...<strong>Rationale:</strong> The three-dimensional (3D) computer-made titanium mesh is widely used in the skull repair for those patients receiving decompression of the bone flap. It can restore normal anatomy to a greater extent and make a better appearance. <strong>Case Presentation: </strong>We reported two cases of patients admitted to our hospital who have experienced high scalp tension after skull repair. At first, these two patients underwent decompression of the bone flap, and the physical examination results showed a defect of skull. No neurological symptoms and signs were found. The 3D computed tomography (CT) reconstruction of skull was performed, and then the skull repair with 3D titanium mesh was conducted. But because of high scalp tension, they underwent a second operation, during which we re-trimmed and reduce the arc of the titanium mesh. The scalp incision of both patients healed well and no titanium mesh was exposed. Both patients have a good prognosis. <strong>Lessons:</strong> We highlight that the high tension of scalp due to overstretching after 3D titanium mesh repair for skull defect should be paid much attention to. Trimming and reducing the arc of titanium mesh is an effective treatment for this situation.展开更多
Objective To explore the application of scalp rotation flap in reconstruction of infectious scalp defect with titanium mesh exposure. Methods Twelve patients were treated in this group including 4 males and 8 female. ...Objective To explore the application of scalp rotation flap in reconstruction of infectious scalp defect with titanium mesh exposure. Methods Twelve patients were treated in this group including 4 males and 8 female. S The defective size ranged from 2. 0 cm × 5. 0 cm to 0.展开更多
Craniomaxillofacial surgery is difficult due to the complexity of the regional anatomy. Computer-assisted surgery is a promising tool aiming to improve the safety and precision of such surgery. A computer-assisted sur...Craniomaxillofacial surgery is difficult due to the complexity of the regional anatomy. Computer-assisted surgery is a promising tool aiming to improve the safety and precision of such surgery. A computer-assisted surgical navigation approach for reconstruction of mandibular defects using a patient-specific titanium mesh tray and particulate cancellous bone and marrow (PCBM) harvested from bilateral anterior ilia is proposed. This case report involves a large multicystic ameloblastoma affecting the right mandible of a 31-year-old male patient. Following detailed clinical examination, radiological interpretation, and histopathological diagnosis, computer-assisted surgical simulation with a virtual 3-dimensional (3-D) model was designed using surgical planning software based on the pre-operative computed tomography data. Long-span segmental resection of the mandible was planned, and the defect was analyzed for reconstruction using a patient-specific reconstruction titanium mesh tray mediated with computer-aided design and manufacturing (CAD/CAM) techniques. During the actual surgery, the ultrasonic bone cutting instrument in the surgeon’s hand was connected to the navigation system to touch an anatomical position on the patient. Therefore, osteotomies were performed finely and smoothly according to the navigation images of the cutting bone line by sequentially moving the instrument. Finally, a CAD/CAM-mediated titanium mesh tray condensed by PCBM was adapted to the remaining mandibular fragments. Six months postoperatively, the patient had a good mandibular configuration and facial contour. Integration of different technologies, such as software planning and 3-D surgical simulation, combined with intraoperative navigation and CAD/CAM techniques, provides safe and precise mandibular reconstruction surgery.展开更多
Thoracolumbar burst fracture, a common condition in clinic, often leads to severe spinal instability and neurologic deficit. In most cases, the compression that caused by backward protrusion of the fracture fragments ...Thoracolumbar burst fracture, a common condition in clinic, often leads to severe spinal instability and neurologic deficit. In most cases, the compression that caused by backward protrusion of the fracture fragments to the spinal cord, makes complete decompression difficult through a posterior approach. Here, we reviewed the clinical records of 22 patients with thoracolumbar burst fracture treated by anterior corpectomy, decompression of the spinal cord, and implantation of titanium mesh cage.展开更多
Background: Although technically regarded as a simple procedure, titanium mesh cranioplasty could lead to various surgical complications, including postoperative implant exposure. However, there is little data availab...Background: Although technically regarded as a simple procedure, titanium mesh cranioplasty could lead to various surgical complications, including postoperative implant exposure. However, there is little data available on the occurrence and risk factors of this complication in the pediatric population. Cases presentation: Two pediatric male patients, one 12-year-old and one 7-year-old, had decompressive craniectomy after traumatic brain injuries and subsequent cranioplasty with titanium mesh. However, both patients had skin defects developed gradually at the scalp adjacent to the surgical incisions, 11 and 7 months after cranioplasty, respectively. Implants removal surgeries were then delivered and, during the operation, some bone debris were found just beneath the skin defects in both patients. Because microbiological culture results of the exudations were negative, in addition to the long interval between cranioplasty and developments of skin defects, surgical infections might not be major causes of the observed titanium implants exposures. On the other hand, local osteogenesis and impaired scalp blood supply might contribute to their occurrence. Conclusions: Efforts should be made to achieve complete clearance of bone debris and protect scalp blood supply during the initial decompressive craniectomy in order to minimize the risks of subsequent titanium mesh exposures.展开更多
To investigate the application of titanium polypropylene mesh in breast reconstruction.In this study,we selected the literature data in recent 4 years to analyze the application of titanium polypropylene mesh in breas...To investigate the application of titanium polypropylene mesh in breast reconstruction.In this study,we selected the literature data in recent 4 years to analyze the application of titanium polypropylene mesh in breast reconstruction.Using the keywords of"breast reconstruction,""titanium polypropylene mesh,^^"application"and"research progress,we analyzed and summarized the related research progress of titanium polypropylene mesh in breast reconstruction.The research was conducted using the analysis of titanium polypropylene mesh,titanium polypropylene mesh in breast reconstruction surgery advantages,adverse complications related to titanium polypropylene mesh in breast reconstruction surgery and preventive measures.By constantly improving these aspects in the research process,the current study has certain value,and may guide the research work of titanium mesh in breast reconstruction.展开更多
本病例报告了一例自体骨-异种骨混合的钛网支撑的引导骨再生(guided bone regeneration,GBR)伴角化龈增量的美学区连续牙列缺损种植修复。患者因外伤致上颌前牙区骨折、水平向骨丧失,连续多颗天然牙缺失。临床治疗取自体骨混合去蛋白牛...本病例报告了一例自体骨-异种骨混合的钛网支撑的引导骨再生(guided bone regeneration,GBR)伴角化龈增量的美学区连续牙列缺损种植修复。患者因外伤致上颌前牙区骨折、水平向骨丧失,连续多颗天然牙缺失。临床治疗取自体骨混合去蛋白牛骨矿物质(deproteinized bovine bone mineral,DBBM)异种骨填入骨缺损区,在唇侧放置钛网和生物可吸收性胶原膜。半年后行简易修复导板引导下种植体植入,二期术前行角化龈增量,临时修复体佩戴6个月后完成最终美学修复。结果可见,自体骨-异种骨混合的钛网支撑的GBR获得了理想的骨增量效果,为种植体植入提供了理想的位点,同时角化龈增量手术为最终美学修复提供了令医患满意的临床效果。因此,自体骨-异种骨混合用于钛网支撑的GBR是一种增加前牙区水平骨量的有效方法。展开更多
Objective:To clarify anatomy-related factors in the cervical spine with subsidence of titanium mesh cage (TMC) after one-level cervical corpectomy and fusion. The effect of the cervical posture, segmental curvature an...Objective:To clarify anatomy-related factors in the cervical spine with subsidence of titanium mesh cage (TMC) after one-level cervical corpectomy and fusion. The effect of the cervical posture, segmental curvature and endplate gradient on this postoperative phenomenon was evaluated. Methods: Between August 2003 and March 2006, a total of the 236 patients underwent one-level corpectomy and TMC fusion. Their radiological examinations were reviewed and clinical outcomes evaluated. Results: In the patients who were followed up for 12 months, TMC subsidence occurred in 54 (28.6%) cases. C6 corpectomy had a significant higher risk (26/60, 43.3%) for TMC subsidence, which was correlated with the variation of the gradient of the vertebral endplates against cervical levels. Although the clinical outcome was comparable with those in the literature, the patients may have subsidence-related problems such as neck-shoulder pain, neurological deterioration and instrumental failure. Conclusion: To decrease the incidence of subsidence, TMC design should be optimized to be in line with anatomic characteristics of the cervical spine.展开更多
文摘Objective To evaluate the use of titanium mesh reconstruction after sternal tumor resection. Methods From January 2007 to January 2011, 14 patients with sternal tumors were admitted into Peking Union Medical Hospital. The clinical characteristics, surgical resection, and technique of reconstruction were reviewed. Results Of the 14 patients, 3 had a metastatic sternal tumor, the primary sites of which were as follows: hepatic carcinoma in one case (metastasis 19 years after operation), breast carcinoma in another case (metastasis 5 years after operation), and renal carcinoma in the other case (found simultaneously). Two patients showed local involvement of the sternum: 1 had thymic carcinoma, and the other had myofibrosarcoma. The remaining 9 patients had primary tumors: 4 were osteochondroma, 3 chondrosarcoma, 1 eosinophilic granuloma, 1 non-Hodgekin's lymphoma. En bloc resection of the sternal tumor was performed in all the 14 patients. The defect was repaired with the titanium mesh adjusted to the shape of the defect and fixed with the stainless steel wire. Eleven patients were followed up for a period from 2 months to 4 years, during which no translocation or broken of the titanium mesh was observed. Conclusions Radical en bloc excision remains the treatment of choice for sternal tumors. Sternum defect reconstruction using titanium mesh as a rigid replacement proves appropriate and effective.
文摘<strong>Rationale:</strong> The three-dimensional (3D) computer-made titanium mesh is widely used in the skull repair for those patients receiving decompression of the bone flap. It can restore normal anatomy to a greater extent and make a better appearance. <strong>Case Presentation: </strong>We reported two cases of patients admitted to our hospital who have experienced high scalp tension after skull repair. At first, these two patients underwent decompression of the bone flap, and the physical examination results showed a defect of skull. No neurological symptoms and signs were found. The 3D computed tomography (CT) reconstruction of skull was performed, and then the skull repair with 3D titanium mesh was conducted. But because of high scalp tension, they underwent a second operation, during which we re-trimmed and reduce the arc of the titanium mesh. The scalp incision of both patients healed well and no titanium mesh was exposed. Both patients have a good prognosis. <strong>Lessons:</strong> We highlight that the high tension of scalp due to overstretching after 3D titanium mesh repair for skull defect should be paid much attention to. Trimming and reducing the arc of titanium mesh is an effective treatment for this situation.
文摘Objective To explore the application of scalp rotation flap in reconstruction of infectious scalp defect with titanium mesh exposure. Methods Twelve patients were treated in this group including 4 males and 8 female. S The defective size ranged from 2. 0 cm × 5. 0 cm to 0.
文摘Craniomaxillofacial surgery is difficult due to the complexity of the regional anatomy. Computer-assisted surgery is a promising tool aiming to improve the safety and precision of such surgery. A computer-assisted surgical navigation approach for reconstruction of mandibular defects using a patient-specific titanium mesh tray and particulate cancellous bone and marrow (PCBM) harvested from bilateral anterior ilia is proposed. This case report involves a large multicystic ameloblastoma affecting the right mandible of a 31-year-old male patient. Following detailed clinical examination, radiological interpretation, and histopathological diagnosis, computer-assisted surgical simulation with a virtual 3-dimensional (3-D) model was designed using surgical planning software based on the pre-operative computed tomography data. Long-span segmental resection of the mandible was planned, and the defect was analyzed for reconstruction using a patient-specific reconstruction titanium mesh tray mediated with computer-aided design and manufacturing (CAD/CAM) techniques. During the actual surgery, the ultrasonic bone cutting instrument in the surgeon’s hand was connected to the navigation system to touch an anatomical position on the patient. Therefore, osteotomies were performed finely and smoothly according to the navigation images of the cutting bone line by sequentially moving the instrument. Finally, a CAD/CAM-mediated titanium mesh tray condensed by PCBM was adapted to the remaining mandibular fragments. Six months postoperatively, the patient had a good mandibular configuration and facial contour. Integration of different technologies, such as software planning and 3-D surgical simulation, combined with intraoperative navigation and CAD/CAM techniques, provides safe and precise mandibular reconstruction surgery.
文摘Thoracolumbar burst fracture, a common condition in clinic, often leads to severe spinal instability and neurologic deficit. In most cases, the compression that caused by backward protrusion of the fracture fragments to the spinal cord, makes complete decompression difficult through a posterior approach. Here, we reviewed the clinical records of 22 patients with thoracolumbar burst fracture treated by anterior corpectomy, decompression of the spinal cord, and implantation of titanium mesh cage.
文摘Background: Although technically regarded as a simple procedure, titanium mesh cranioplasty could lead to various surgical complications, including postoperative implant exposure. However, there is little data available on the occurrence and risk factors of this complication in the pediatric population. Cases presentation: Two pediatric male patients, one 12-year-old and one 7-year-old, had decompressive craniectomy after traumatic brain injuries and subsequent cranioplasty with titanium mesh. However, both patients had skin defects developed gradually at the scalp adjacent to the surgical incisions, 11 and 7 months after cranioplasty, respectively. Implants removal surgeries were then delivered and, during the operation, some bone debris were found just beneath the skin defects in both patients. Because microbiological culture results of the exudations were negative, in addition to the long interval between cranioplasty and developments of skin defects, surgical infections might not be major causes of the observed titanium implants exposures. On the other hand, local osteogenesis and impaired scalp blood supply might contribute to their occurrence. Conclusions: Efforts should be made to achieve complete clearance of bone debris and protect scalp blood supply during the initial decompressive craniectomy in order to minimize the risks of subsequent titanium mesh exposures.
文摘To investigate the application of titanium polypropylene mesh in breast reconstruction.In this study,we selected the literature data in recent 4 years to analyze the application of titanium polypropylene mesh in breast reconstruction.Using the keywords of"breast reconstruction,""titanium polypropylene mesh,^^"application"and"research progress,we analyzed and summarized the related research progress of titanium polypropylene mesh in breast reconstruction.The research was conducted using the analysis of titanium polypropylene mesh,titanium polypropylene mesh in breast reconstruction surgery advantages,adverse complications related to titanium polypropylene mesh in breast reconstruction surgery and preventive measures.By constantly improving these aspects in the research process,the current study has certain value,and may guide the research work of titanium mesh in breast reconstruction.
文摘本病例报告了一例自体骨-异种骨混合的钛网支撑的引导骨再生(guided bone regeneration,GBR)伴角化龈增量的美学区连续牙列缺损种植修复。患者因外伤致上颌前牙区骨折、水平向骨丧失,连续多颗天然牙缺失。临床治疗取自体骨混合去蛋白牛骨矿物质(deproteinized bovine bone mineral,DBBM)异种骨填入骨缺损区,在唇侧放置钛网和生物可吸收性胶原膜。半年后行简易修复导板引导下种植体植入,二期术前行角化龈增量,临时修复体佩戴6个月后完成最终美学修复。结果可见,自体骨-异种骨混合的钛网支撑的GBR获得了理想的骨增量效果,为种植体植入提供了理想的位点,同时角化龈增量手术为最终美学修复提供了令医患满意的临床效果。因此,自体骨-异种骨混合用于钛网支撑的GBR是一种增加前牙区水平骨量的有效方法。
文摘Objective:To clarify anatomy-related factors in the cervical spine with subsidence of titanium mesh cage (TMC) after one-level cervical corpectomy and fusion. The effect of the cervical posture, segmental curvature and endplate gradient on this postoperative phenomenon was evaluated. Methods: Between August 2003 and March 2006, a total of the 236 patients underwent one-level corpectomy and TMC fusion. Their radiological examinations were reviewed and clinical outcomes evaluated. Results: In the patients who were followed up for 12 months, TMC subsidence occurred in 54 (28.6%) cases. C6 corpectomy had a significant higher risk (26/60, 43.3%) for TMC subsidence, which was correlated with the variation of the gradient of the vertebral endplates against cervical levels. Although the clinical outcome was comparable with those in the literature, the patients may have subsidence-related problems such as neck-shoulder pain, neurological deterioration and instrumental failure. Conclusion: To decrease the incidence of subsidence, TMC design should be optimized to be in line with anatomic characteristics of the cervical spine.