Halogenated disinfection byproducts(DBPs) are an unintended consequence of drinking water disinfection, and can have significant toxicity. XAD resins are commonly used to extract and enrich trace levels of DBPs for co...Halogenated disinfection byproducts(DBPs) are an unintended consequence of drinking water disinfection, and can have significant toxicity. XAD resins are commonly used to extract and enrich trace levels of DBPs for comprehensive, nontarget identification of DBPs and also for in vitro toxicity studies. However, XAD resin recoveries for complete classes of halogenated DBPs have not been evaluated, particularly for low, environmentally relevant levels(ng/L to low μg/L). Thus, it is not known whether levels of DBPs or the toxicity of drinking water might be underestimated. In this study, DAX-8/XAD-2 layered resins were evaluated, considering both adsorption and elution from the resins, for extracting 66 DBPs from water. Results demonstrate that among the 7 classes of DBPs investigated, trihalomethanes(THMs), including iodo-THMs, were the most efficiently adsorbed, with recovery of most THMs ranging from 50%-96%, followed by halonitromethanes(40%-90%). The adsorption ability of XAD resins for haloacetonitriles, haloacetamides, and haloacetaldehydes was highly dependent on the individual species. The adsorption capacity of XAD resins for haloacetic acids was lower(5%-48%), even after adjusting to p H 1 before extraction. Recovery efficiency for most DBPs was comparable with their adsorption, as most were eluted effectively from XAD resins by ethyl acetate. DBP polarity and molecular weight were the two most important factors that determine their recovery. Recovery of trichloromethane, iodoacetic acid, chloro-and iodo-acetonitrile, and chloroacetamide were among the lowest, which could lead to underestimation of toxicity, particularly for iodoacetic acid and iodo-acetonitrile, which are highly toxic.展开更多
Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7...Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7 and D-201 are performed, and all data indicates resin XAD-7 can be used as an effective adsorbent for removing tannic acid during water/wastewater treatment. Furthermore, adsorption thermodynamics studies indicate different adsorption mechanisms for TA on XAD-7 and D-201. FT-IR and solid state 13C-NMR spectroscopy are used to explain the adsorption force between XAD-7 and TA. It suggests that hydrogen bonding is the main adsorption force for TA. Finally, XAD-7＇s adsorption capacity in the presence of different metal ions is investigated, which indicates that heavy metal ions in solutions can decrease the adsorption capacity for TA on ester resin XAD-7.展开更多
The direct determination of toxic metal ions, in environmental samples, is difficult because of the latter＇s presence in trace concentration in association with complex matrices, thereby leading to insufficient sensi...The direct determination of toxic metal ions, in environmental samples, is difficult because of the latter＇s presence in trace concentration in association with complex matrices, thereby leading to insufficient sensitivity and selectivity of the methods used. The simultaneous removal of the matrix and preconcentration of the metal ions, through solid phase extraction,serves as the promising solution. The mechanism involved in solid phase extraction（SPE）depends on the nature of the sorbent and analyte. Thus, SPE is carried out by means of adsorption, ion exchange, chelation, ion pair formation, and so forth. As polymeric supports, the commercially available Amberlite resins have been found very promising for designing chelating matrices due to its good physical and chemical properties such as porosity, high surface area,durability and purity. This review presents an overview of the various works done on the modification of Amberlite XAD resins with the objective of making it an efficient sorbent. The methods of modifications which are generally based on simple impregnation, sorption as chelates and chemical bonding have been discussed. The reported results, including the preconcentration limit, the detection limit, sorption capacity, preconcentration factors etc., have been reproduced.展开更多
Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) fr...Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) from nitrate medium was carried out using batch technique. Various parameters affecting the uptake of this metal ion were described in the previous paper (Belkhouche and Didi, 2010) and the capacity of the impregnated resin for bismuth(III) was found to be 490.7 mg/g of resin. Effect of temperature on the values of distribution equilibrium was studied to evaluate the changes in standard thermodynamic quantities. A comparison of Langmuir forms I, II and Freundlich sorption isotherms was realized and the kinetic models applied to the adsorption rate data were evaluated for Lagergren first order, the pseudo second order and Morris–Weber models. From the results, the adsorption of Bi(III) onto D2EHPA/XAD-1180 resin shown the exothermic character and followed the Langmuir form II isotherm. Thus, the capacity of monolayer adsorption of Bi(III) was equal to 769.23 mg/g of resin. Both the Lagergren pseudo first order and film-diffusion models were found to best describe the experimental rate data.展开更多
基金funding from the National Science Foundation (No. CBET 1705206)the University of South Carolina, and the Chinese Scholarship Council (No. CSC 201908350069)。
文摘Halogenated disinfection byproducts(DBPs) are an unintended consequence of drinking water disinfection, and can have significant toxicity. XAD resins are commonly used to extract and enrich trace levels of DBPs for comprehensive, nontarget identification of DBPs and also for in vitro toxicity studies. However, XAD resin recoveries for complete classes of halogenated DBPs have not been evaluated, particularly for low, environmentally relevant levels(ng/L to low μg/L). Thus, it is not known whether levels of DBPs or the toxicity of drinking water might be underestimated. In this study, DAX-8/XAD-2 layered resins were evaluated, considering both adsorption and elution from the resins, for extracting 66 DBPs from water. Results demonstrate that among the 7 classes of DBPs investigated, trihalomethanes(THMs), including iodo-THMs, were the most efficiently adsorbed, with recovery of most THMs ranging from 50%-96%, followed by halonitromethanes(40%-90%). The adsorption ability of XAD resins for haloacetonitriles, haloacetamides, and haloacetaldehydes was highly dependent on the individual species. The adsorption capacity of XAD resins for haloacetic acids was lower(5%-48%), even after adjusting to p H 1 before extraction. Recovery efficiency for most DBPs was comparable with their adsorption, as most were eluted effectively from XAD resins by ethyl acetate. DBP polarity and molecular weight were the two most important factors that determine their recovery. Recovery of trichloromethane, iodoacetic acid, chloro-and iodo-acetonitrile, and chloroacetamide were among the lowest, which could lead to underestimation of toxicity, particularly for iodoacetic acid and iodo-acetonitrile, which are highly toxic.
基金supported by the National Natural Science Fundation of China(No.50778088)China National Funds for Distinguished Young Scientists(No.50825802)
文摘Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7 and D-201 are performed, and all data indicates resin XAD-7 can be used as an effective adsorbent for removing tannic acid during water/wastewater treatment. Furthermore, adsorption thermodynamics studies indicate different adsorption mechanisms for TA on XAD-7 and D-201. FT-IR and solid state 13C-NMR spectroscopy are used to explain the adsorption force between XAD-7 and TA. It suggests that hydrogen bonding is the main adsorption force for TA. Finally, XAD-7＇s adsorption capacity in the presence of different metal ions is investigated, which indicates that heavy metal ions in solutions can decrease the adsorption capacity for TA on ester resin XAD-7.
基金the financial supports given to this work by Ministry of Higher Education (MOHE) Malaysia, project grant Q.J130000.2544.04H03Research Management Centre (RMC), Universiti Teknologi Malaysia (UTM.J.09.01/13.14/1/88J1d2 (49))
文摘The direct determination of toxic metal ions, in environmental samples, is difficult because of the latter＇s presence in trace concentration in association with complex matrices, thereby leading to insufficient sensitivity and selectivity of the methods used. The simultaneous removal of the matrix and preconcentration of the metal ions, through solid phase extraction,serves as the promising solution. The mechanism involved in solid phase extraction（SPE）depends on the nature of the sorbent and analyte. Thus, SPE is carried out by means of adsorption, ion exchange, chelation, ion pair formation, and so forth. As polymeric supports, the commercially available Amberlite resins have been found very promising for designing chelating matrices due to its good physical and chemical properties such as porosity, high surface area,durability and purity. This review presents an overview of the various works done on the modification of Amberlite XAD resins with the objective of making it an efficient sorbent. The methods of modifications which are generally based on simple impregnation, sorption as chelates and chemical bonding have been discussed. The reported results, including the preconcentration limit, the detection limit, sorption capacity, preconcentration factors etc., have been reproduced.
文摘Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) from nitrate medium was carried out using batch technique. Various parameters affecting the uptake of this metal ion were described in the previous paper (Belkhouche and Didi, 2010) and the capacity of the impregnated resin for bismuth(III) was found to be 490.7 mg/g of resin. Effect of temperature on the values of distribution equilibrium was studied to evaluate the changes in standard thermodynamic quantities. A comparison of Langmuir forms I, II and Freundlich sorption isotherms was realized and the kinetic models applied to the adsorption rate data were evaluated for Lagergren first order, the pseudo second order and Morris–Weber models. From the results, the adsorption of Bi(III) onto D2EHPA/XAD-1180 resin shown the exothermic character and followed the Langmuir form II isotherm. Thus, the capacity of monolayer adsorption of Bi(III) was equal to 769.23 mg/g of resin. Both the Lagergren pseudo first order and film-diffusion models were found to best describe the experimental rate data.
