In order to achieve effective, economic, and easily achievable photocatalyst for the degradation of dye methyl orange（MeO）, ZnO, ZnO/ZnS and ZnO/ZnS/α-Fe2O3 nanocomposites were prepared by simple chemical synthetic...In order to achieve effective, economic, and easily achievable photocatalyst for the degradation of dye methyl orange（MeO）, ZnO, ZnO/ZnS and ZnO/ZnS/α-Fe2O3 nanocomposites were prepared by simple chemical synthetic route in the aqueous medium. Phase, crystallinity, surface structure and surface behavior of the synthesized materials were determined by X-ray diffraction（XRD） and Brunauer-Emmett-Teller analysis（BET） techniques. XRD study established formation of good crystalline ZnO, ZnO/ZnS and ZnO/ZnS/α-Fe2O3 nanomaterials. By using intensity of constituent peaks in the XRD pattern, the compositions of nanocomposites were determined. From the BET analysis, the prepared materials show mesoporous behavior, type Ⅳ curves along with H4 hysteresis. The ZnO/ZnS/α-Fe2O3 composite shows the largest surface area among three materials. From the UV-visible spectra, the band gap energy of the materials was determined. Photoluminescence spectra（PL） were used to determine the emission behavior and surface defects in the materials. In PL spectra, the intensity of UV peak of ZnO/ZnS is lowered than that of ZnO while in case of ZnO/ZnS/α-Fe2O3, the intensity further decreased. The visible emission spectra of ZnO/ZnS increased compared with ZnO while in ZnO/ZnS/α-Fe2O3 it is further increased compared with ZnO/ZnS. The as-synthesized materials were used as photocatalysts for the degradation of dye MeO. The photo-degradation data revealed that the ZnO/ZnS/α-Fe2O3 is the best photocatalyst among three specimens for the degradation of dye MeO. The decrease of intensity of UV emission peak and the increase of intensity of visible emission cause the decrease of recombination of electrons and holes which are ultimately responsible for the highest photocatalytic activity of ZnO/ZnS/α-Fe2O3.展开更多
Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in d...Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in detail,including X-ray diffraction,N2 adsorption-desorption,N2O chemisorption,temperature-programmed reduction and evolved gas analyses.The influences of DMAC temperature,reaction temperature and specific Cu surface area on catalytic performance are investigated.It is considered that the aurichalcite phase in the precursor plays a key role in improving the physiochemical properties and activities of the final catalysts.The catalyst from rich-aurichalcite precursor exhibits large specific Cu surface area and high space time yield of methanol （212 g/（Lcat·h）;T=513 K,p=3MPa,SV=12000 h-1）.展开更多
A new zinc hydrogen phosphite C4H8N2H4·Zn（HPO3）2 was prepared by hydrothermal method in the presence of piperazine as a structure-directing agent and the crystal structure was determined by single-crystal X-ray...A new zinc hydrogen phosphite C4H8N2H4·Zn（HPO3）2 was prepared by hydrothermal method in the presence of piperazine as a structure-directing agent and the crystal structure was determined by single-crystal X-ray diffraction analysis and further characterized by X-ray powder diffraction, IR, ICP, elemental analysis and TG analysis. This compound has one-dimensional anionic chains containing four-membered rings built from corner-sharing linked alternating ZnO4 tetrahedra and HPO3 pseudo pyramids. The zinc hydrogen phosphite chains are interacted with the templates of diprotonated piperazine by N—H…O hydrogen bond. Crystal data for C4H8N2H4·Zn（HPO3）2∶monoclinic, space group C2/c. a=1.774 8（2） nm, b=0.724 28（9） nm, c=0.880 87（11） nm, β= 105.345（3）°, V=1.091 9（2） nm 3, Z=4, Dc=1^907 Mg/m 3, R1=0.022 9, wR2=0.058 8.展开更多
文摘In order to achieve effective, economic, and easily achievable photocatalyst for the degradation of dye methyl orange（MeO）, ZnO, ZnO/ZnS and ZnO/ZnS/α-Fe2O3 nanocomposites were prepared by simple chemical synthetic route in the aqueous medium. Phase, crystallinity, surface structure and surface behavior of the synthesized materials were determined by X-ray diffraction（XRD） and Brunauer-Emmett-Teller analysis（BET） techniques. XRD study established formation of good crystalline ZnO, ZnO/ZnS and ZnO/ZnS/α-Fe2O3 nanomaterials. By using intensity of constituent peaks in the XRD pattern, the compositions of nanocomposites were determined. From the BET analysis, the prepared materials show mesoporous behavior, type Ⅳ curves along with H4 hysteresis. The ZnO/ZnS/α-Fe2O3 composite shows the largest surface area among three materials. From the UV-visible spectra, the band gap energy of the materials was determined. Photoluminescence spectra（PL） were used to determine the emission behavior and surface defects in the materials. In PL spectra, the intensity of UV peak of ZnO/ZnS is lowered than that of ZnO while in case of ZnO/ZnS/α-Fe2O3, the intensity further decreased. The visible emission spectra of ZnO/ZnS increased compared with ZnO while in ZnO/ZnS/α-Fe2O3 it is further increased compared with ZnO/ZnS. The as-synthesized materials were used as photocatalysts for the degradation of dye MeO. The photo-degradation data revealed that the ZnO/ZnS/α-Fe2O3 is the best photocatalyst among three specimens for the degradation of dye MeO. The decrease of intensity of UV emission peak and the increase of intensity of visible emission cause the decrease of recombination of electrons and holes which are ultimately responsible for the highest photocatalytic activity of ZnO/ZnS/α-Fe2O3.
基金supported by the National Basic Research Program of China (No. 2011CB201404)the financial support of the State Key Laboratory for Oxo Synthesis and Selective Oxidation (OSSO) of China
文摘Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in detail,including X-ray diffraction,N2 adsorption-desorption,N2O chemisorption,temperature-programmed reduction and evolved gas analyses.The influences of DMAC temperature,reaction temperature and specific Cu surface area on catalytic performance are investigated.It is considered that the aurichalcite phase in the precursor plays a key role in improving the physiochemical properties and activities of the final catalysts.The catalyst from rich-aurichalcite precursor exhibits large specific Cu surface area and high space time yield of methanol （212 g/（Lcat·h）;T=513 K,p=3MPa,SV=12000 h-1）.
文摘A new zinc hydrogen phosphite C4H8N2H4·Zn（HPO3）2 was prepared by hydrothermal method in the presence of piperazine as a structure-directing agent and the crystal structure was determined by single-crystal X-ray diffraction analysis and further characterized by X-ray powder diffraction, IR, ICP, elemental analysis and TG analysis. This compound has one-dimensional anionic chains containing four-membered rings built from corner-sharing linked alternating ZnO4 tetrahedra and HPO3 pseudo pyramids. The zinc hydrogen phosphite chains are interacted with the templates of diprotonated piperazine by N—H…O hydrogen bond. Crystal data for C4H8N2H4·Zn（HPO3）2∶monoclinic, space group C2/c. a=1.774 8（2） nm, b=0.724 28（9） nm, c=0.880 87（11） nm, β= 105.345（3）°, V=1.091 9（2） nm 3, Z=4, Dc=1^907 Mg/m 3, R1=0.022 9, wR2=0.058 8.
