Nanosized ZnO powders were prepared with a two-step precipitation method. The average size of ZnO particles was about 80 nm and their size distribution was narrow. Combining with ultrafine additive powders, ZnO base v...Nanosized ZnO powders were prepared with a two-step precipitation method. The average size of ZnO particles was about 80 nm and their size distribution was narrow. Combining with ultrafine additive powders, ZnO base varistor was produced via an oxide mixing route. ZnO varistor derived from normal reagent grade starting materials was investigated for comparison purpose. Outstanding microstructure of the ZnO varistor derived from nanosize ZnO powders and ultrafine dopants was obtained: uniform distribution of fine ZnO grains (less than 3 microns), grain boundary and the dopant position. Higher varistor voltage (U=492 V/mm) and nonlinear coefficient (α=56.2) as well as lower leakage current (TL=1.5 μuA) were achieved. The better electrical properties were attributed to the uniform microstructure, which in turn led to stable and uniform potential barriers. Also this improved technique is more feasible for producing ZnO nanopowders and resulting varistor in large scales.展开更多
The microwave dielectric properties and microstructure of BaTi4.3ZnyO9.6＋y ＋0.02 mol% SnO2＋0.01 mol% MnCO3＋x mol% Nb2O5（x=0-0.05, y=0-0.08） system ceramics were studied as a function of the amount of ZnO and Nb2...The microwave dielectric properties and microstructure of BaTi4.3ZnyO9.6＋y ＋0.02 mol% SnO2＋0.01 mol% MnCO3＋x mol% Nb2O5（x=0-0.05, y=0-0.08） system ceramics were studied as a function of the amount of ZnO and Nb2O5 doped. Addition of （y=0-0.05） ZnO and （x=0-0.025） Nb2O5 enhanced the reactivity and decreased the sintering temperature effectively. It also increased the dielectric constant ε r and quality factor Q（=1/tan 8） of the system due to the substitution of Ti^4＋ ions with incorporating Zn^2＋and Nb^5＋ ions, which was analyzed by the reaction ZnO＋Nb2O5＋ 3 TiTxTi →ZnTi＋ 2NbTi＋3TiO2. When the system doped with （y=0.05） ZnO and （x=0.025） Nb205 were sintered at 1 160 ℃ for 6 h, the εr. Qf0 value and rfwere 36.5, 42 000 GHz, and＋1.8 ppm/℃, respectively, at 5 GHz.展开更多
文摘Nanosized ZnO powders were prepared with a two-step precipitation method. The average size of ZnO particles was about 80 nm and their size distribution was narrow. Combining with ultrafine additive powders, ZnO base varistor was produced via an oxide mixing route. ZnO varistor derived from normal reagent grade starting materials was investigated for comparison purpose. Outstanding microstructure of the ZnO varistor derived from nanosize ZnO powders and ultrafine dopants was obtained: uniform distribution of fine ZnO grains (less than 3 microns), grain boundary and the dopant position. Higher varistor voltage (U=492 V/mm) and nonlinear coefficient (α=56.2) as well as lower leakage current (TL=1.5 μuA) were achieved. The better electrical properties were attributed to the uniform microstructure, which in turn led to stable and uniform potential barriers. Also this improved technique is more feasible for producing ZnO nanopowders and resulting varistor in large scales.
基金the Natural Science Foundation of Tianjin (No. 06YFJMJC01000)
文摘The microwave dielectric properties and microstructure of BaTi4.3ZnyO9.6＋y ＋0.02 mol% SnO2＋0.01 mol% MnCO3＋x mol% Nb2O5（x=0-0.05, y=0-0.08） system ceramics were studied as a function of the amount of ZnO and Nb2O5 doped. Addition of （y=0-0.05） ZnO and （x=0-0.025） Nb2O5 enhanced the reactivity and decreased the sintering temperature effectively. It also increased the dielectric constant ε r and quality factor Q（=1/tan 8） of the system due to the substitution of Ti^4＋ ions with incorporating Zn^2＋and Nb^5＋ ions, which was analyzed by the reaction ZnO＋Nb2O5＋ 3 TiTxTi →ZnTi＋ 2NbTi＋3TiO2. When the system doped with （y=0.05） ZnO and （x=0.025） Nb205 were sintered at 1 160 ℃ for 6 h, the εr. Qf0 value and rfwere 36.5, 42 000 GHz, and＋1.8 ppm/℃, respectively, at 5 GHz.
