Efficient light-driven reductive amination of furfural to furfurylamine over ruthenium-cluster catalyst

Selective reductive amination of carbonyl compounds with high activity is very essential for the chemical and pharmaceutical industry,but scarcely successful paradigm was reported via efficient photocatalytic reactions.Herein,the ultrasmall Ru nanoclusters(~0.9 nm)were successfully fabricated over P25 support with positive charged Ru^(δ+)species at the interface.A new route was developed to achieve the furfural(FAL)to furfurylamine(FAM)by coupling the light-driven reductive amination and hydrogen transfer of ethanol over this type catalyst.Strikingly,the photocatalytic activity and selectivity are strongly dependent on the particle size and electronic structure of Ruthenium.The Ru^(δ+)species at the interface promote the formation of active imine intermediates;moreover,the Ru nanoclusters facilitate the separation efficiency of electrons and holes as well as accelerate the further hydrogenation of imine intermediates to product primary amines.In contrast Ru particles in larger nanometer size facilitate the formation of the furfuryl alcohol and excessive hydrogenation products.In addition,the coupling byproducts can be effectively inhibited via the construction of sub-nanocluster.This study offers a new path to produce the primary amines from biomass-derived carbonyl compounds over hybrid semiconductor/metal-clusters photocatalyst via light-driven tandem catalytic process.

One-step Eco-friendly Fabrication of Antibacterial Polyester Via On-line Amination Reaction by Melt Coextrusion

The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.

Selectively reductive amination of levulinic acid with aryl amines to N-substituted aryl pyrroles

Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via reductive amination/cyclization of levulinic acid(LA)with primary aromatic amines and hydrosilanes(e.g.,PMHS)over Cs F,and a series of N-substituted aryl pyrroles could be obtained in good to excellent yields at 120○C.The mechanism investigation indicates that the reaction proceeds in two steps:the cyclization between amine and LA occurs first to form intermediate 5-methyl-N-alkyl-1,3-dihydro-2H-pyrrolones and their isomeride(B),and then the chemo-and region-selective reduction of intermediates take place to produce the final products.This approach for synthesis of N-substituted aryl pyrroles can be performed under mild and green conditions,which may have promising applications.

Optimization of reaction for synthesis of polyisobutylene amine between amination agent and epoxy polyisobutylene

An optimization study on the amination reaction of epoxy polyisobutylene for synthesis of polyisobutylene amine is presented. The experimental results indicate that n-butanol and ethylenediamine are the suitable solvent and amination agents for the reaction, respectively. The reaction yield of the amination reaction is notably increased with the enhanced molar ratio of either n-butanol against epoxy polyisobutylene or ethylenediamine against epoxy polyisobutylene. Also, the yield is enhanced with increasing temperature and time during the experimental range. Strikingly, the yield reaches as high as 91. 30% under optimal conditions; with the molar ratio of ethylenediamine, n-butanol and PIBO of 10∶ 6∶ 1, the reaction temperature of 150 ℃ and the reaction time of 6 h. In addition, the yield of the reaction is slightly decreased with the enhanced water content of the system. Accordingly, the mass concentration of water should be controlled within 1. 7% during the reaction.

SAPO-34 synthesized with n-butylamine as a template and its catalytic application in the methanol amination reaction

SAPO-34 was synthesized with n-butylamine（BA） as a template for the first time.Crystallization temperature and initial Si amount were important factors leading to successful syntheses.Lamellar AlPO-kanemite tends to form as the major phase or as an impurity of SAPO-34 at lower crystallization temperatures,though a higher initial Si amount may offer a positive effect on the crystallization of SAPO-34 that mitigates the low temperature.Higher temperature（240℃） can effectively suppress the generation of lamellar materials and allow the synthesis of pure SAPO-34 with a wider range of Si incorporation.The crystallization processes at 200 and 240℃ were investigated and compared.We used the aminothermal method to synthesize SAPO-34-BA at 240℃ and also found n-propylamine is a suitable template for the synthesis of SAPO-34.The SAPO-34-BA products were characterized by many techniques.SAPO-34-BA has good thermal stability,crystallinity and porosity.BA remained intact in the crystals with ~1.8 BA molecule per chabazite cage.The catalytic performance of SAPO-34 was tested in the methanol amination reaction,which showed high methanol conversion and selectivity for methylamine plus dimethylamine under the conditions investigated,suggesting that this material is a good candidate for the synthesis of methylamines.

Effects of Ni particle size on amination of monoethanolamine over Ni-Re/SiO_2 catalysts

Ni-Re/SiO2 catalysts with controllable Ni particle sizes(4.5–18.0 nm)were synthesized to investigate the effects of the particle size on the amination of monoethanolamine(MEA).The catalysts were characterized by various techniques and evaluated for the amination reaction in a trickle bed reactor at 170℃,8.0 MPa,and 0.5 h^-1 liquid hourly space velocity of MEA(LHSVMEA)in NH3/H2 atmosphere.The Ni-Re/SiO2 catalyst with the lowest Ni particle size(4.5 nm)exhibited the highest yield(66.4%)of the desired amines(ethylenediamine(EDA)and piperazine(PIP)).The results of the analysis show that the turnover frequency of MEA increased slightly(from 193 to 253 h^-1)as the Ni particle sizes of the Ni-Re/SiO2 catalysts increased from 4.5 to 18.0 nm.Moreover,the product distribution could be adjusted by varying the Ni particle size.The ratio of primary to secondary amines increased from 1.0 to 2.0 upon increasing the Ni particle size from 4.5 to 18.0 nm.Further analyses reveal that the Ni particle size influenced the electronic properties of surface Ni,which in turn affected the adsorption of MEA and the reaction pathway of MEA amination.Compared to those of small Ni particles,large particles possessed a higher proportion of high-coordinated terrace Ni sites and a higher surface electron density,which favored the amination of MEA and NH3 to form EDA.

A shaped binderless ZSM-11 zeolite catalyst for direct amination of isobutene to tert-butylamine

A shaped binderless and two binder‐containing ZSM‐11 zeolite catalysts were prepared and characterized by powder X‐ray diffraction, N2 adsorption‐desorption, and pyridine adsorption‐infrared measurements. The binderless catalyst was synthesized using a dry‐gel conversion technique, inwhich 1,6‐hexanediamine and tetrabutylammonium bromide were used as structure‐directingagents and no other alkaline materials were added. The catalytic performance of the zeolites in the direct amination of isobutene to tert‐butylamine was evaluated in a fixed‐bed reactor. By virtue of its high crystallinity as well as its good mechanical strength, the shaped binderless ZSM‐11 catalyst showed a higher rate of formation of tert‐butylamine than did the binder‐containing catalysts.

Partial amination of cationic exchange resins and its application in the hydration of butene

In this work, the amination of sulfonated polystyrene resin with alkyl secondary amine is investigated. The catalytic activities of the modified resins are determined through the hydration of l-butene. The optimum chain length and the best range of amination rate are determined. It is found that the single-pass conversion of 1 -butene was raised 2% on average, and the relative activity was increased over 30% after modification. A hypothesis about the enhancement of catalytic activities by the inclusion of alkyl chain to wrap up the butene molecule is proposed.

Thermodynamic study of direct amination of isobutylene to tert-butylamine

On basis of thermodynamic empirical equations, the thermodynamic parameters for the direct amination of isobutylene to tert‐butylamine, an atomically economic and green chemical reaction,were calculated. In particular, the equilibrium conversion of isobutylene under various reactionconditions close to those used in industry was calculated and discussed. Isobutylene amination is atemperature sensitive reaction due to its exothermic nature and isobutylene equilibrium conversiondecreases with temperature. However, kinetically, the amination reaction will be faster at ahigher temperature. Thus, there must be an optimum temperature for the reaction. A high pressureand n(NH3)/n(i‐C4H8) molar ratio promote the transformation of isobutylene to tert‐butylamine.Developing a highly efficient catalyst under mild reaction conditions is preferred for the aminationprocess. The reaction was investigated over a series of acidic zeolites. ZSM‐11 zeolite exhibited thebest performance with 14.2% isobutylene conversion (52.2% of the equilibrium conversion) and >99.0% tert‐butylamine selectivity. The effect of reaction conditions on the performance of the ZSM‐11 catalyst agreed with the thermodynamic results, which provides guidance for further catalyst development and reaction condition optimization.

Microwave-assisted chemoselective copper-catalyzed amination of o-chloro and o-bromobenzoic acids using aromatic amines under solvent free conditions

Copper-catalyzed synthesis of N-aryl anthranilic acid derivatives using effective amination of 2-chloro and 2-bromobenzoic acid under microwave irradiation is reported. Some of the advantages of this method are high chemoselectivity, short reaction times, ease of work up procedure and elimination of the need for acid protection. 2009 Published by Elsevier B.V. on behalf of Chinese Chemical Society.

Direct amination of benzene to aniline with several typical vanadium complexes

The liquid-phase direct catalytic amination of benzene to aniline was performed in acetic acid water solvent using a series of vanadium （Ⅲ, Ⅳ,Ⅴ） complexes with N,O- or O,O-ligands as catalysts and hydroxylamine hydrochloride as the aminating agent. The vanadium complexes exhibited much higher selectivity towards the production of aniline than NaVO3 or VOSO4. Under the optimized conditions, an aniline yield of 42.5% and a TON of 48 with a high selectivity of above 99.9% was obtained using 0.2 mmol of [VO（OAc）2] as the catalyst.

Effective synthesis of 5-amino-1-pentanol by reductive amination of biomass-derived 2-hydroxytetrahydropyran over supported Ni catalysts

A highly efficient and green process was developed for the synthesis of useful 5-amino-1-pentanol(5-AP)from biomass-derived dihydropyran by coupling the in situ generation of 5-hydroxypentanal(5-HP,via the ring-opening tautomerization of 2-hydroxytetrahydropyran(2-HTHP))and its reductive amination over supported Ni catalysts.The catalytic performances of the supported Ni catalysts on different oxides including SiO2,TiO2,ZrO2,γ-Al2 O3,and MgO as well as several commercial hydrogenation catalysts were investigated.The Ni/ZrO2 catalyst presented the highest 5-AP yield.The characterization results of the oxide-supported Ni catalysts showed that the Ni/ZrO2 catalyst possessed high reducibility and a high surface acid density,which lead to the enhanced activity and selectivity of the catalyst.The effect of reaction parameters on the catalytic performance of the Ni/ZrO2 catalyst was studied,and a high 5-AP yield of 90.8%was achieved in the reductive amination of 2-HTHP aqueous solution under mild conditions of 80℃and 2 MPa H2.The stability of the Ni/ZrO2 catalyst was studied using a continuous flow reactor,and only a slight decrease in the 5-AP yield was observed after a 90-h time-on-stream.Additionally,the reaction pathways for the reductive amination of 2-HTHP to synthesize 5-AP were proposed.

Preparation of 2,5-Bis(Aminomethyl)Furan by Direct Reductive Amination of 2,5-Diformylfuran over Nickel-Raney Catalysts

The direct reductive amination of 2,5-diformylfuran (DFF) with ammonia to 2,5-bis(aminomethyl)furan (BAF) was demonstrated, for the first time, over the commercial type Nickel-Raney and acid treated Nickel-Raney catalysts. The effects of reaction parameters such as reaction medium, temperature and hydrogen pressure were described. The acid treated Nickel-Raney catalyst exhibited the highest BAF yield in the THF-water mixed reaction medium. The relatively higher Ni0 species composition and larger surface area of the acid treated Nickel-Raney catalyst with specific reaction conditions contributed greatly to the BAF formation. The oligomeric species, such as furanic imine trimers and tetramers confirmed by MALDI-MS analysis were presented as the intermediates of DFF reductive amination.

ZrCl_4/Hantzsch 1,4-dihydropyridine as a new and efficient reagent combination for the direct reductive amination of aldehydes and ketones with weakly basic amines

ZrCl4/Hantzsch 1,4-dihydropyridine is a mild and highly efficient reagent combination for the direct reductive amination. Weakly basic amines such as anilines substituted by electron-withdrawing group and heteroaromatic amines can be reductively alkylated with electron rich aldehydes and ketones under mild conditions to form the secondary amines in excellent yields.

Direct amination of isobutylene over zeolite catalysts with various topologies and acidities

The atomically economic and green chemical reaction of direct amination of isobutylene to tertbutylamine, particularly under the relative mild reaction conditions available for future industrial use,was carried out over zeolite catalysts possessing different topological structures, from one dimensional to three dimensional pore system, and from small 8-member ring pore（MRP） to medium 10 MRP and further to large 12 MRP zeolites, to disclose the relationship between the zeolite properties/topologies and their amination performance systematically under the mild reaction conditions. It was discovered that the pore structure and the acidities of zeolite catalysts played crucial roles in the isobutylene amination process, and suitable pore diameter（larger than 0.5 nm or with large side pockets/cups in the outside surface） and a certain number of mid-strong acid sites are indispensable to catalyze the amination reaction,while too strong acid strength was not conducive to the process of isobutylene amination. Among them,zeolites with topologies of BEA, MFI, MEL, MWW and EUO exhibited good amination performance, with which the isobutylene conversion was higher than 12.61%（>46.42% of the equilibrium conversion） under the studied mild reaction conditions. Due to the good amination performance and the large adjustable Si/Al;ratio range, ZSM-5 was selected to further study the effect of acidity on the amination performance systematically under the mild reaction conditions, and the activity-acidity relationship in the amination process was disclosed: the amination activity（isobutylene conversion） had a linear correlation with the amount of mid-strong B acidity under the studied conditions over ZSM-5 catalyst, which can provide guidance for further developing high-efficient amination catalyst under mild reaction conditions available for future industrial use.

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method.The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI)ions from aqueous solution has been investigated.Three biochars,Melon-B,Melon-BO-NH_(2) and Melon-BO-TETA,were made from watermelon peel via dehydration with 50%sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_(2) or Triethylenetetramine(TETA)to give Melon-BO-TETA.The prepared biochars were characterized by BET,BJH,SEM,FT-IR,TGA,DSC and EDAX analyses.The highest removal percentage of Cr(VI)ions was 69%for Melon-B,98%for Melon-BO-NH_(2) and 99%for Melon-BO-TETA biochars of 100 mg·L^(−1) Cr(VI)ions initial concentration and 1.0 g·L^(−1) adsorbents dose.The unmodified biochar(Melon-B)and modified biochars(Melon-BO-NH_(2) and Melon-BO-TETA)had maximum adsorption capacities(Q_(m))of 72.46,123.46,and 333.33 mg·g^(−1),respectively.The amination of biochar reduced the pore size of modified biochar,whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations.The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B,Melon-BO-NH_(2) and Melon-BO-TETA,respectively.The adsorption rate was primarily controlled by pseudo-second–order rate model.Conclusively,the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process.The adsorption for the Melon-B,Melon-BO-NH_(2) and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.

Reductive amination of aldehydes and ketones using sodium borohydride in the presence of silica chloride under solvent-free conditions

A simple and convenient procedure for the preparation of amines from aldehydes and ketones with sodium borohydride activated by silica chloride as a catalyst under solvent-free conditions is described.A variety of aliphatic and aromatic aldehydes,ketones and amines when mixed with NaBH;/silica chloride at room temperature,afforded excellent yield of the corresponding amines.

Preparation of Aminated Lignin through Etherification and Amination

A new method for the preparation of aminated lignin （AEL） through etherification and amination reaction was presented. Chlorine atoms were ？rstly introduced into lignin through its etheri？cation with epichlorohydrin. Then, hydrophilic amine groups were grafted to the modi？ed lignin structure through amination with ethylenediamine to obtain AEL. Subsequent acidi？cation of AEL led to the ionized aminated lignin （IAEL）. The results of our analyses showed that the nitrogen content of AEL was 6.9%. Foaming and emulsifying experiments indicated that AEL had better foamability and emulsifying properties than IAEL. Surface tension tests showed that AEL and IAEL had similar critical micelle concentration （CMC）. However, IAEL had lower surface tension （36.33 mN/m） than AEL （42.89 mN/m） at CMC. These results demonstrate the promising applicability of AEL as an emulsi？er and that of IAEL as feedstock in the production of detergent and dispersant.

Reductive amination of ketones with ammonium catalyzed by a newly identified Brevibacterium epidermidis strain for the synthesis of(S)-chiral amines

The asymmetric reductive amination of achiral ketones with ammonia is a particularly attractive reaction for the synthesis of chiral amines.Although several engineered amine dehydrogenases have been developed by protein engineering for the asymmetric reductive amination of ketones,they all display(R)‐stereoselectivity.To date,there is no report of an(S)‐stereoselective biocatalyst for this reaction.Herein,a microorganism named Brevibacterium epidermidis ECU1015 that catalyzes the(S)‐selective reductive amination of ketones with ammonium has been successfully isolated from soil.Using B.epidermidis ECU1015 as the catalyst,the asymmetric reductive amination of a set of phenylacetone derivatives was successfully carried out,yielding the corresponding(S)‐chiral amines with moderate conversion and>99%enantiomeric excess.

THE PLAN FOR THE PROFICIENCY EXAMINATION FOR INTERNATIONAL ACUPUNCTURE AND MOXIBUSTION PROFESSIONALS(FOR TRIAL IMPLEMENTATION)

1.Purposes of the Examination1.1 To make the education and exami-nation system of Acupuncture andMoxibustion(A & M)gradually be formaland standard,so as to improve the profes-sional quality of international A & M profes-sionals with continuous efforts.