Calculating Method for Influence of Material Flow on Energy Consumption in Steel Manufacturing Process

From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.

A CALCULATING METHOD OF THE KILL PROBABILITY ATTACK AREA FOR AAM

This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.

Monte Carlo simulation based thinning and calculating method for noninvasive blood glucose sensing by near-infrared spectroscopy

Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key to measure the floating reference point(FRP)precisely for the application of FRT.Monte Carlo(MC)simulation has been introduced to quantitatively in-vestigate the effects of positioning errors and light source drifts on measuring FRP.In this article,thinning and calculating method(TCM)is proposed to quantify the positioning error.Mean-while,the normalization process(NP)is developed to significantly reduce the error induced by light source drift.The results according to TCM show that 7 purm deviations in positioning can generate about 10.63%relative error in FRP.It is more noticeable that 1%fluctuation in light source intensity may lead to 12.21%relative errors.Gratifyingly,the proposed NP model can effectively reduce the error caused by light source drift.Therefore,the measurement system for FRPs must meet that the positioning error is less than 7 purm,and the light source drift is kept within 1%.Furthermore,an improvement for measurement system is proposed in order to take advantage of the NP model.

Calculating method of contact stress for non-circular gears

According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.

Erratum to:“An Approximate Method for Calculating the Fluid Force and Response of A Circular Cylinder at Lock-in” [China Ocean Engineering,22(3),2008,371-384]

Because of my carelessness,Eq.（1）in the paper "An approximate method for calculating the fluid force and response of a circular cylinder at lock-in"(China Ocean Engineering,22（3）,2008,pp.373)should be f’-1.0/U’-5.0=f’;-1.0/5.75f’;-5.0,not f’=U’/5.75. My apology is hereby given.

Method of Calculating the Safety Factor Profile on the HT-7 Tokamak

A method of calculating the safety profile on the HT-7 tokamak has been described in this paper. It is derived from Maxwell's equations, among which we-mainly use .two of them: one is the magnetic field diffusion equation, and the other is Ampere's Law. This method can be also used to evaluate the safety factor on other devices with a circular cross sections. It is helpful to the study of the plasma MHD behavior on the HT-7 tokamak.

A METHOD FOR CALCULATING TRANSIENT FUNCTIONS OF EQUIVALENT DETERMINISTIC INPUT

In the present paper the analytical formulas for calculating the equivalent deterministic transients for multivariable cross correlated random processes are developed.The formulas permit the determination of the Root-mean-square of the responses of a linear time-invariant system to stationary multiple random inputs in the time domain.The method is applicable in the study of flight of airplanes in atmospheric turbulence and is also useful for general engineering applications of stochastc processes control.

ON THE LIMIT CASE OF THE STEP-REDUCTION METHOD FOR CALCULATING NON-UNIFORM BEAM WITH VARIOUS SECTIONS

In this paper, the step reduction method is discussed, which was advanced by Prof. Yeh Kai-yuan for calculating a non-uniform beam with various sections. The following result is proved. The approximate solution by this method approaches the true solution if the number of the steps approaches the infinity. However, the measure of the error between the limit solution and the ture solution is not in the pure mathematics sense but in the mechanics sense.

Discussion on Calculation Method of Poverty Incidence in the Exit Evaluation of Poverty-Stricken Counties and Villages

Poverty incidence is the key index that needs to be measured in the poverty exit examination and evaluation of 832 poverty-stricken counties and 128 000 poverty-stricken villages. In this paper, based on the statement of general concept and conventional calculation method of the poverty incidence, the calculation method of poverty incidence in the exit evaluation of poverty-stricken counties （also including poverty-stricken township and poverty-stricken villages） was investigated through the view of the third-party evaluation. In addition to considering the previous ＂number of planned poverty remaining population＂, the method also needed to give consideration to the exiting mistaken population, evaluation missing population. Based on the case in Yuanyang County, Honghe Hani and Yi Autonomous Prefecture, Yunnan Province, the poverty incidences of 10 exit planning villages by the end of 2017 in Yuanyang County were investigated and estimated, and suggestions were proposed to promote the precise poverty alleviation and poverty relief of the county.

Dynamic Characteristics and Simplified Numerical Methods of An All-Vertical-Piled Wharf in Offshore Deep Water

There has been a growing trend in the development of offshore deep-water ports in China. For such deep sea projects, all-vertical-piled wharves are suitable structures and generally located in open waters, greatly affected by wave action. Currently, no systematic studies or simplified numerical methods are available for deriving the dynamic characteristics and dynamic responses of all-vertical-piled wharves under wave cyclic loads. In this article, we compare the dynamic characteristics of an all-vertical-piled wharf with those of a traditional inshore high-piled wharf through numerical analysis; our research reveals that the vibration period of an all-vertical-piled wharf under cyclic loading is longer than that of an inshore high-piled wharf and is much closer to the period of the loading wave. Therefore, dynamic calculation and analysis should be conducted when designing and calculating the characteristics of an all-vertical-piled wharf. We establish a dynamic finite element model to examine the dynamic response of an all-vertical-piled wharf under wave cyclic loads and compare the results with those under wave equivalent static load; the comparison indicates that dynamic amplification of the structure is evident when the wave dynamic load effect is taken into account. Furthermore, a simplified dynamic numerical method for calculating the dynamic response of an all-vertical-piled wharf is established based on the P-Y curve. Compared with finite element analysis, the simplified method is more convenient to use and applicable to large structural deformation while considering the soil non-linearity. We confirmed that the simplified method has acceptable accuracy and can be used in engineering applications.

Comparison study on calculation methods of bending behavior of Chinese reinforced concrete beams from 1912 to 1949

In order to study the calculation methods of bending behavior of Chinese reinforced concrete beams from 1912 to 1949, tests on the mechanical performance of 66 rebars from different modem Chinese concrete buildings, the concrete compressive strength of 12 modem Chinese concrete buildings, and the concrete cover thickness of 9 modem Chinese concrete buildings are carried out; and the actual material properties and structural conformations of modem Chinese concrete buildings are obtained. Then, the comparison on calculation methods of bending behavior including the original Chinese calculation method, the present Chinese calculation method, the present American calculation method and the present European calculation method is studied. The results show that the original Chinese calculation method of bending behavior is based on the allowable stress calculation method, and the design safety factors are 3.55 to 4. 0. In term of the calculation area of longitudinal rebars of reinforced concrete beams, without considering earthquake action, the original Chinese structural calculation method is safer than the present Chinese structural calculation method, the present European structural calculation method, and the present American structural calculation method. The results can provide support for the structural safety assessments of modem Chinese reinforced concrete buildings.

航空发动机旋转盘腔内部流动换热特性研究进展综述

The rotating disk cavity is an important part of the cooling-air system of the aero engine,and it has obviously significance to study the internal flow and heat transfer characteristics of the disc cavity,which will be helpful to improve the efficiency of the aero engine.This paper summarizes the existing research results of domestic and overseas.The present work considers the test methods and calculation methods of the flow and heat transfer characteristics of the rotating disc cavity of the aircraft engine.It points out that,the main factors which affect the heat transfer characteristics are the disc chamber speed,the intake volume,the design of the disc cavity pre-rotation/despin structure,and the type of disc cavity system.The influence of these factors on the characteristics of flow heat transfer is summarized.Based on these factors,the disc cavity structure can be optimized and designed,which provides suggestions for reducing the weight of the turbine,improving the thrust-to-weight ratio of the aero engine,and improving the cooling efficiency.

A METHOD FOR PREDICTING BUCKLING LOADS OF COMPOSITE LAMINATED STRIPS WITH A SURFACE NOTCH

Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.

Seismic Design Strategy of High Pier Bridge

China’s infrastructure construction has been continuously improving in recent years,especially its highway construction,which spans from north to south and connects east to west.Some special areas are also interconnected through bridges,but constructing highway bridges through complex terrains or across valleys and mountain gullies presents significant challenges,requiring an increase in the height of bridge piers.These bridge piers generally reach tens or even hundreds of meters in height.Furthermore,the construction of these high-pier bridges is becoming increasingly widespread.Not only do they pose greater construction challenges,but they also have higher requirements for seismic resistance.This article primarily analyzes the characteristics of high-pier bridges and proposes seismic design schemes,calculation methods,and design strategies to enhance the construction quality of high-pier bridges.

RESEARCH ON METHOD TO CALCULATE VELOCITIES OF SOLID PHASE AND LIQUID PHASE IN DEBRIS FLOW

Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham＇s rheology equation of liquid phase and Bagnold＇s testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.

Simplified Calculation Methods for All-Vertical-Piled Wharf in Offshore Deep Water

All-vertical-piled wharf is a kind of high-piled wharf, but it is extremely different from the traditional ones in some aspects, such as the structural property, bearing characteristics, failure mechanism, and static or dynamic calculation methods. In this paper, the finite element method （FEM） and theoretical analysis method are combined to analyze the structural property, bearing behavior and failure mode of the all-vertical-piled wharf in offshore deep water, and to establish simplified calculation methods determining the horizontal static ultimate bearing capacity and the dynamic response for the all-vertical-piled wharf. Firstly, the bearing capability and failure mechanism for all-vertical-piled wharf are studied by use of FEM, and the failure criterion is put forward for all-vertical-piled wharf based on the ＇plastic hinge＇. According to the failure criterion and P-Y curve method, the simplified calculation method of the horizontal static ultimate bearing capacity for all-vertical-piled wharf is proposed, and it is verified that the simplified method is reasonable by comparison with the FEM. Secondly, the displacement dynamic magnification factor for the all-vertical-piled wharf under wave cyclic loads and ship impact loads is calculated by the FEM and the theory formula based on the single degree of freedom （SDOF） system. The results obtained by the two methods are in good agreement with each other, and the simplified calculation method of the displacement dynamic magnification factor for all-vertical-piled wharf under dynamic loads is proposed. Then the simplified calculation method determining the dynamic response for the all-vertical-piled wharf is proposed in combination with P-Y curve method. That is, the dynamic response of the structure can be obtained through the static calculation results of P-Y curve method multiplied by the displacement dynamic magnification factor. The feasibility of the simplified dynamic response method is verified by comparison with the FEM under different conditions.

Thermal kinetic analysis of a complex process from a solid-state reaction by deconvolution procedure from a new calculation method and related thermodynamic functions of Mn_(0.90)Co_(0.05)Mg_(0.05)HPO_4?3H_2O

Three individual peaks of thermal solid-state reaction processes of the synthesized Mn0.90Co0.05Mg0.05HPO4?3H2O were observed corresponding to dehydration I,dehydration II and polycondensation processes.An alternative method for the calculation of the extent of conversion was proposed from the peak area of the individual DTG peak after applying the best fitting deconvolution function(Frazer–Suzuki function).An iterative integral isoconversional equation was used to compute the values of the apparent activation energy Eαand they were found to be 65.87,78.16 and 119.32 kJ/mol for three peaks,respectively.Each individual peak was guaranteed to be a single-step kinetic system with its unique kinetic parameters.The reaction mechanism functions were selected by the comparison between experimental and model plots.The results show that the first,second and final individual peaks were two-dimensional diffusion of spherical symmetry(D2),three-dimensional diffusion of spherical symmetry(D3)and contracting cylinder(cylindrical symmetry,R2)mechanisms.Pre-exponential factor values of 3.91×106,1.35×107 and 2.15×107 s?1 were calculated from the Eαvalues and reaction mechanisms.The corresponded standard thermodynamic functions of the transition-state(activated)complexes were determined and found to agree well with the experimental data.

Ranking Method for Complementary Judgment Matrixes with Fuzzy Numbers Based on Hausdorff Metric Distance

A method for ranking complementary judgment matrixes with traspezoidal fuzzy numbers based on Hausdorff metric distance and fuzzy compromise decision approach is proposed. With regard to fuzzy number complementary judgment matrixes given by a decider group whose members have various weights, the expert＇s information was aggregated first by means of simple weight average（SWA） method and Bonissone calculational method. Hence a matrix including all the experts＇ preference information was got. Then the matrix＇ column members were added up and the fuzzy evaluation values of the alternatives were got. Lastly, the Hausdorff metric distance and fuzzy compromise decision approach were used to rank the fuzzy evaluation values and then the ranking values of all the alternatives were got. Because exact numbers and triangular fuzzy numbers could all be transformed into trapezoidal fuzzy numbers, the method developed can rank complementary judgment matrixes with trapezoidal fuzzy numbers, triangular fuzzy numbers and exact numbers as well. An illustrative example is also given to verify the developed method and to demonstrate its feasibility and practicality.

A Two-Stage Method for an Approximate Calculation of Statically Indeterminate Trusses

The paper presents the principles of a method, which in two simple stages makes possible to carry out the statically calculation of values of forces acting in the fiat static indeterminate trusses. In each stage, it is considered the static determinate truss, scheme of which is obtained after remove the suitable number of members from the basic static indeterminate truss. The both intermediate statically determinate trusses are of the same clear span and they are loaded by forces of half values applied to the corresponding truss nodes. The method applies one of the typical procedures of calculation of the statically determinate trusses and then it is applied in an appropriate way the rule of superposition for obtaining the final values of forces acting in particular members of the basic truss. The values of forces calculated in this way are of a very close approximation to the force values determined in the special and complex ways being considered as the exact calculation methods. The proposed method can be useful mostly but not only for the initial structural design of such systems. The simplicity of the two-stage method justifies an assumption that it can be relatively easy and worthy to adjust to the requirements of the computer aided technology of statically calculation of the complex forms of trusses.

A Calculation Method for Incidence and Reflection of Irregular Waves Along Seawalls

Some researches have been made in this aspect. In the method by Walton Jr.(1992), incident waves are supposed to be the overlapping result of M component waves with different frequencies which may take different directions, the direction of incident waves should be available in advance, but in fact the direction of incident waves is not available. In our study, incident waves are supposed to be composed of M overlapping component waves with different frequencies, and different frequencies have different directions. Based on the irregular wave reflection theory, the calculation formulas of wave direction, complex amplitude of incident waves, and complex amplitude of reflected waves in surface which are composed of component waves are derived by means of discrete Fourier transform. Then, the frequency spectra of incident waves and reflected waves and the reflection coefficient of waves with corresponding frequencies are obtained. Verification of the method and the calculation results from in-situ measured data indicate that the method is reliable and highly accurate.