Empirical Analysis on Influence Mechanism of Cohesiveness and Collective Efficacy of Virtual Community Based on Triadic Reciprocal Determinism

The virtual community has become a new life style as for human,but the public's acceptance is relatively low at present.So the research about the mechanism of the influence on the cohesiveness and the collective efficiency in virtual community has an important theoretical value and practical value.In the paper,the key variables that affect virtual community cohesiveness are extracted from two aspects—self-perception of community members and community environment,and the influence mechanism model of virtual community cohesiveness and community collective efficiency is established based on Triadic Reciprocal Determinism.By means of the questionnaire on the community members and the empirical analysis,the key factors influencing cohesiveness of virtual community are brought up,as well as the mechanism that the four dimensions of cohesiveness work,on collective efficiency.According to the results,it is practically meaningful that the problems and insufficiency in the operation of existing virtual community are discovered,which guides the operating managers of the virtual community to formulate operation policy of the virtual community for operating managers to develop strategies.

刃宽对硬岩掘进影响的仿真及试验研究

滚刀在硬岩掘进中极易发生崩刃、偏磨等异常失效,研究硬岩掘进条件下刃型参数对滚刀破岩载荷和破岩效率的影响十分重要.本文采用滚刀破岩试验和仿真分析相结合的方法,从载荷曲线、破岩体积、破岩比能等方面分析了刃宽对滚刀破岩的影响.基于双线性本构模型及Benzeggagh–Kenane损伤断裂准则建立了岩石材料的内聚力本构模型,通过单轴抗压试验及巴西劈裂试验对内聚力本构模型的微观参数进行了校准,并进一步建立了滚刀破岩的内聚力仿真模型.结果表明:内聚力本构模型可以准确的模拟破岩过程中岩石裂纹的萌生和扩展过程.依据裂纹的萌生和扩展情况,滚刀破岩过程主要分为三个阶段:弹性阶段、裂纹萌生–扩展阶段及岩石破坏卸载阶段.滚刀破岩载荷和破岩体积随着贯入度、刀间距和刃宽的增加而增加;破岩比能随刃宽的增加呈先减小后增大的趋势.对于所选取的硬岩,采用13 mm刃宽滚刀破岩时比能最小,破岩效率最高;7 mm刃宽滚刀破岩时无法形成贯通岩片,相邻滚刀之间仍存在岩脊,破岩效率较低.

DYNAMIC COHESIVENESS IN A COMMUNICATIVE ENGLISH CLASS

One of the main features of a communicative English classis activities, organized by the teacher and conducted by studentsperforming certain functions and involving different topics. Theuse of activities has gained much attention. However, the linkbetween activities seems to have been ignored. This paper is anattempt to explore the role of cohesiveness between activities incommunicative teaching. The cohesiveness can be eithermechanical or dynamic. The key is that dynamic cohesivenesscontributes to the atmosphere and effectiveness of communicativeEnglish classroom teaching.

UHPC-RC节段组合梁的抗弯性能分析

为研究低预应力度条件下,不同节段接缝的超高性能混凝土-钢筋混凝土(ultra-high performance concrete-reinforced concrete,UHPC-RC)组合梁的抗弯性能,文章基于ABAQUS有限元软件,建立UHPC-RC节段组合梁的基准有限元模型,并利用已有的试验数据验证该模型的合理性。节段接缝分别为平面干接缝、平面胶接缝、齿键干接缝和齿键胶接缝,在基准有限元模型的基础上,进一步研究节段接缝类型对组合梁抗弯性能的影响。研究发现,在四点受弯加载方式下,接缝的几何特征(平面或齿键)对组合梁的极限荷载和开裂荷载影响较小,环氧树脂胶的使用对组合梁的抗弯性能影响较大。

基于Voronoi建模和Cohesive单元的PBX细观力学模型

针对PBX的细观力学模型存在模型结构与真实PBX细观形貌不符、破坏行为描述不全面(仅考虑界面脱粘)、研究对象单一(大多针对PBX-9501)等问题,建立了基于Voronoi建模和Cohesive单元的PBX细观力学模型。首先,基于光学显微镜下的细观结构图,采用Voronoi方法构建了更贴近实际形貌的PBX炸药细观模型;然后,采用内聚力有限元方法在炸药晶体内部、黏结剂内部及炸药颗粒/黏结剂界面处都引入了Cohesive单元,以在二维尺度上实现任意路径破坏行为的模拟;最后,针对某HMX基-F2311黏结剂炸药和某HMX基-F2313黏结剂炸药标定了模型参数,模拟了这两种炸药的准静态拉伸行为。结果表明,两种炸药数值模拟的拉伸变形曲线、破坏应力、破坏应变都与试验数据吻合良好,表明该模型不仅适用于不同PBX炸药材料(线弹性PBX、非线性PBX)的变形行为描述,还可以分析PBX炸药在拉伸破坏过程中的细观机理,刻画不同PBX炸药的裂纹萌生、扩展和贯穿的过程。

Anisotropic shearing mechanism of Kangding slate:Experimental investigation and numerical analysis

The shear mechanical behavior is regarded as an essential factor affecting the stability of the surrounding rocks in underground engineering.The shear strength and failure mechanisms of layered rock are significantly affected by the foliation angles.Direct shear tests were conducted on cubic slate samples with foliation angles of 0°,30°,45°,60°,and 90°.The effect of foliation angles on failure patterns,acoustic emission(AE)characteristics,and shear strength parameters was analyzed.Based on AE characteristics,the slate failure process could be divided into four stages:quiet period,step-like increasing period,dramatic increasing period,and remission period.A new empirical expression of cohesion for layered rock was proposed,which was compared with linear and sinusoidal cohesion expressions based on the results made by this paper and previous experiments.The comparative analysis demonstrated that the new expression has better prediction ability than other expressions.The proposed empirical equation was used for direct shear simulations with the combined finite-discrete element method(FDEM),and it was found to align well with the experimental results.Considering both computational efficiency and accuracy,it was recommended to use a shear rate of 0.01 m/s for FDEM to carry out direct shear simulations.To balance the relationship between the number of elements and the simulation results in the direct shear simulations,the recommended element size is 1 mm.

Impact Analysis of Microscopic Defect Types on the Macroscopic Crack Propagation in Sintered Silver Nanoparticles

Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,the three primary micro-defect types at potential stress concentrations in sintered AgNPs are identified,categorized,and quantified.Molecular dynamics(MD)simulations are employed to observe the failure evolution of different microscopic defects.The dominant mechanisms responsible for this evolution are dislocation nucleation and dislocation motion.At the same time,this paper clarifies the quantitative relationship between the tensile strain amount and the failure mechanism transitions of the three defect types by defining key strain points.The impact of defect types on the failure process is also discussed.Furthermore,traction-separation curves extracted from microscopic defect evolutions serve as a bridge to connect the macro-scale model.The validity of the crack propagation model is confirmed through tensile tests.Finally,we thoroughly analyze how micro-defect types influence macro-crack propagation and attempt to find supporting evidence from the MD model.Our findings provide a multi-perspective reference for the reliability analysis of sintered AgNPs.

基于晶体塑性模型与内聚力单元模拟的接触疲劳亚表面原奥晶界裂纹萌生

材料在接触疲劳载荷下亚表面裂纹的萌生是其主要损伤模式之一.采用晶体塑性模型耦合内聚力单元,模拟高强钢在滚动接触疲劳载荷下亚表面原奥氏体晶界处的疲劳裂纹萌生.基于内聚力模型的损伤起始准则和疲劳损伤演化规律,并利用USDFLD子程序将内聚力单元的疲劳损伤与晶体塑性模型结合,计算了滚动接触疲劳加载下的损伤随循环次数的累积.对Voronoi模型下的疲劳裂纹萌生进行了模拟,研究了晶体取向对裂纹萌生的影响.结果表明,裂纹的萌生受剪切应力主导,萌生位置在最大剪切应力范围内,模拟结果和试验观察一致.晶粒取向对裂纹萌生位置与萌生寿命有显著影响.

Systematic review of risk factors,prognosis,and management of colorectal signet-ring cell carcinoma

BACKGROUND Colorectal signet-ring cell carcinoma(CSRCC)is a rare clinical entity which accounts for approximately 1%of all colorectal cancers.Although multiple studies concerning this specific topic have been published in the past decades,the pathogenesis,associated risk factors,and potential implications on treatment are still poorly understood.Besides the low incidence,historically confusing histological criteria have resulted in confusing data.Nevertheless,the rising incidence of CSRCC along with relatively young age at presentation and associated dismal prognosis,highlight the actual interest to synthesize the known literature regarding CSRCC.AIM To provide an updated overview of risk factors,prognosis,and management of CSRCC.METHODS A literature search in the MEDLINE/PubMed database was conducted with the following search terms used:‘Signet ring cell carcinoma’and‘colorectal’.Studies in English language,published after January 1980,were included.Studies included in the qualitative synthesis were evaluated for content concerning epidemiology,risk factors,and clinical,diagnostic,histological,and molecular features,as well as metastatic pattern and therapeutic management.If possible,presented data was extracted in order to present a more detailed overview of the literature.RESULTS In total,67 articles were included for qualitative analysis,of which 54 were eligible for detailed data extraction.CSRCC has a reported incidence between 0.1%-2.4%and frequently presents with advanced disease stage at the time of diagnosis.CSRCC is associated with an impaired overall survival(5-year OS:0%-46%)and a worse stagecorrected outcome compared to mucinous and not otherwise specified adenocarcinoma.The systematic use of exploratory laparoscopy to determine the presence of peritoneal metastases has been advised.Surgery is the mainstay of treatment,although the rates of curative resection in CSRCC(21%-82%)are lower compared to those in other histological types.In case of peritoneal metastasis,cytoreductive surgery with hyperthermic intraperitoneal chemotherapy should only be proposed in selected patients.CONCLUSION CSRCC is a rare clinical entity most often characterized by young age and advanced disease at presentation.As such,diagnostic modalities and therapeutic approach should be tailored accordingly.

An extended micromechanical-based plastic damage model for understanding water effects on quasi-brittle rocks

Water effects on the mechanical properties of rocks have been extensively investigated through experiments and numerical models.However,few studies have established a comprehensive link between the microscopic mechanisms of water-related micro-crack and the constitutive behaviors of rocks.In this work,we shall propose an extended micromechanical-based plastic damage model for understanding weakening effect induced by the presence of water between micro-crack’s surfaces on quasi-brittle rocks,based on the Mori-Tanaka homogenization and irreversible thermodynamics framework.Regarding the physical mechanism,water strengthens micro-crack propagation,which induces damage evolution during the pre-and post-stage,and weakens the elastic effective properties of rock matrix.After proposing a special calibration procedure for the determination of model parameters based on the laboratory compression tests,the proposed micromechanical-based model is verified by comparing the model predictions to the experimental results.The model effectively captures the mechanical behaviors of quasibrittle rocks subjected to the weakening effects of water.

Progressive fragmentation of granular assemblies within rockslides: Insights from discrete-continuous numerical modeling

Rock fragmentation plays a critical role in rock avalanches,yet conventional approaches such as classical granular flow models or the bonded particle model have limitations in accurately characterizing the progressive disintegration and kinematics of multi-deformable rock blocks during rockslides.The present study proposes a discrete-continuous numerical model,based on a cohesive zone model,to explicitly incorporate the progressive fragmentation and intricate interparticle interactions inherent in rockslides.Breakable rock granular assemblies are released along an inclined plane and flow onto a horizontal plane.The numerical scenarios are established to incorporate variations in slope angle,initial height,friction coefficient,and particle number.The evolutions of fragmentation,kinematic,runout and depositional characteristics are quantitatively analyzed and compared with experimental and field data.A positive linear relationship between the equivalent friction coefficient and the apparent friction coefficient is identified.In general,the granular mass predominantly exhibits characteristics of a dense granular flow,with the Savage number exhibiting a decreasing trend as the volume of mass increases.The process of particle breakage gradually occurs in a bottom-up manner,leading to a significant increase in the angular velocities of the rock blocks with increasing depth.The simulation results reproduce the field observations of inverse grading and source stratigraphy preservation in the deposit.We propose a disintegration index that incorporates factors such as drop height,rock mass volume,and rock strength.Our findings demonstrate a consistent linear relationship between this index and the fragmentation degree in all tested scenarios.

Fractures interaction and propagation mechanism of multi-cluster fracturing on laminated shale oil reservoir

The continental shale reservoirs of Jurassic Lianggaoshan Formation in Sichuan Basin contain thin lamina,which is characterized by strong plasticity and developed longitudinal shell limestone interlayer.To improve the production efficiency of reservoirs by multi-cluster fracturing,it is necessary to consider the unbalanced propagation of hydraulic fractures and the penetration effect of fractures.This paper constructed a numerical model of multi-fracture propagation and penetration based on the finite element coupling cohesive zone method;considering the construction cluster spacing,pump rate,lamina strength and other parameters studied the influencing factors of multi-cluster fracture interaction propagation;combined with AE energy data and fracture mode reconstruction method,quantitatively characterized the comprehensive impact of the strength of thin interlayer rock interfaces on the initiation and propagation of fractures that penetrate layers,and accurately predicted the propagation pattern of hydraulic fractures through laminated shale oil reservoirs.Simulation results revealed that in the process of multi-cluster fracturing,the proportion of shear damage is low,and mainly occurs in bedding fractures activated by outer fractures.Reducing the cluster spacing enhances the fracture system's penetration ability,though it lowers the activation efficiency of lamina.The high plasticity of the limestone interlayer may impact the vertical propagation distance of the main fracture.Improving the interface strength is beneficial to the reconstruction of the fracture height,but the interface communication effect is limited.Reasonable selection of layers with moderate lamina strength for fracturing stimulation,increasing the pump rate during fracturing and setting the cluster spacing reasonably are beneficial to improve the effect of reservoir stimulation.

基于LCEM-GFEM方法爆炸载荷作用下含缺陷岩体损伤机理研究

在爆破作业过程中,岩体缺陷对裂纹扩展具有显著影响。本研究基于全局有限元方法的局部黏结单元(LCEM-GFEM)方法构建数值模拟模型,研究爆破作用下含缺陷岩体的损伤演化和裂纹扩展模式。通过引入能量传递系数,定量分析了缺陷形态对应力波传播和衰减的影响。结果表明,缺陷形态对岩体的损伤特性和裂纹扩展具有显著影响。随着平行缺陷夹角的增加,爆破诱发的裂缝与衍生裂缝的合并路径从缺陷末端转移到了缺陷中间,能量传递系数增加,分形维度减小。随着平行缺陷之间的水平距离增加,平行缺陷之间的裂缝数目和能量传递系数相应减少。随着垂直缺陷之间的垂直距离增加,穿过缺陷C的主水平裂缝长度增加,能量传递系数和分形维度也增加。研究结果可为受到爆破荷载作用下含缺陷岩体的损伤特征提供指导。

Finite Element Simulations of the Localized Failure and Fracture Propagation in Cohesive Materials with Friction

Strain localization frequently occurs in cohesive materials with friction(e.g.,composites,soils,rocks)and is widely recognized as a fundamental cause of progressive structural failure.Nonetheless,achieving high-fidelity simulation for this issue,particularly concerning strong discontinuities and tension-compression-shear behaviors within localized zones,remains significantly constrained.In response,this study introduces an integrated algorithmwithin the finite element framework,merging a coupled cohesive zone model(CZM)with the nonlinear augmented finite elementmethod(N-AFEM).The coupledCZMcomprehensively describes tension-compression and compressionshear failure behaviors in cohesive,frictional materials,while the N-AFEM allows nonlinear coupled intraelement discontinuities without necessitating extra nodes or nodal DoFs.Following CZM validation using existing experimental data,this integrated algorithm was utilized to analyze soil slope failure mechanisms involving a specific tensile strength and to assess the impact of mechanical parameters(e.g.,tensile strength,weighting factor,modulus)in soils.

Constitutive Behavior of the Interface between UHPC and Steel Plate without Shear Connector:From Experimental to Numerical Study

The application of ultra-high performance concrete(UHPC)as a covering layer for steel bridge decks has gained widespread popularity.By employing a connection without a shear connector between the steel plate and UHPC,namely,the sandblasted interface and the epoxy adhesive with sprinkled basalt aggregate interface,the installation cannot only be simplified but also the stress concentration resulting from the welded shear connectors can be eliminated.This study develops constitutive models for these two interfaces without shear connectors,based on the interfacial pull-off and push-out tests.For validation,three-point bending tests on the steel-UHPC composite plates are conducted.The results indicated that the proposed bilinear traction-separation model for the sandblasted interface and the trapezoidal traction-separation model for the epoxy adhesive with sprinkled basalt aggregate interface can generally calibrate the interfacial behavior.However,the utilization of the experimentally determined pure shear strength underestimates the load-carrying capacity of the composite plates in the case of three-point bending tests.By recalling the Mohr-Coulomb criterion,this underestimation is attributed to the enhancement of the interface shear strength by the presence of normal stress.

基于内聚力单元法的船舶与重叠冰碰撞数值模拟研究

The gradual increase in shipping and drilling activities in the Arctic regions has resulted in the increased importance of studying the structural safety of polar ships in various ice conditions.Rafted ice refers to a type of accumulated and overlapped sea ice;it is driven by external forces,such as wind and waves,and may exert high loads on ships and threaten their structural safety.Therefore,the properties of rafted ice and the construction of numerical models should be studied before exploring the interaction and collision between ships and rafted ice.Based on the nonlinear finite-element method,this paper introduces the cohesive element model for the simulation of rafted ice.The interaction between ships and rafted ice is studied,and the ice force of the hull is obtained.Numerical simulation results are compared with model test findings,and the effectiveness of the cohesive element method in the construction of the model of rafted ice materials is verified.On this basis,a multilayer rafted ice model is constructed,and its interaction with the ship is studied.The research unveils that rafted ice parts impede crack generation and slow down crack propagation to a certain extent.

Effect of intermittent joint distribution on the mechanical and acoustic behavior of rock masses

The mechanical characteristics and acoustic behavior of rock masses are greatly influenced by stochastic joints.In this study,numerical models of rock masses incorporating intermittent joints with different numbers and dip angles were produced using the finite element method(FEM)with the intrinsic cohesive zone model(ICZM).Then,the uniaxial compressive and wave propagation simulations were performed.The results indicate that the joint number and dip angle can affect the mechanical and acoustic properties of the models.The uniaxial compressive strength(UCS)and wave velocity of rock masses decrease monotonically as the joint number increases.However,the wave velocity grows monotonically as the joint dip angle increases.When the joint dip angle is 45°–60°,the UCS of the rock mass is lower than that of other dip angles.The wave velocity parallel to the joints is greater than that perpendicular to the joints.When the dip angle of joints remains unchanged,the UCS and wave velocity are positively related.When the joint dip angle increases,the variation amplitude of the UCS regarding the wave velocity increases.To reveal the effect of the joint distribution on the velocity,a theoretical model was also proposed.According to the theoretical wave velocity,the change in wave velocity of models with various joint numbers and dip angles was consistent with the simulation results.Furthermore,a theoretical indicator(i.e.fabric tensor)was adopted to analyze the variation of the wave velocity and UCS.

润滑油黏滞特性致电磁阀复位延迟故障仿真研究

针对核电领域的某型电磁阀中润滑油黏滞特性导致阀芯复位延迟故障的现象,使用有限元仿真和试验相结合的方式对故障机制进行研究。通过建立无油膜的电磁阀有限元模型,仿真得到正常的阀芯复位时间,发现摩擦因数对阀芯复位时间无影响。通过阀芯复位时间试验和油膜黏力试验,分别得到样品的复位延迟时间和活塞油膜和O形圈油膜的力学特性,结果表明,活塞油膜和O形圈油膜的黏力是造成阀芯复位延迟故障的主要原因,其中活塞油膜黏力占主导。使用Cohesive单元对具有双线性本构的活塞油膜进行模拟,采用呈指数式衰减的集中力来模拟O形圈油膜黏力,分别建立活塞油膜和O形圈油膜模型,并对黏力作用下的阀芯复位过程进行有限元仿真。仿真得到复位延迟时间与试验结果相比误差较小,证明该仿真方法可有效地模拟电磁阀阀芯的延迟复位过程。

Fracture propagation and evolution law of indirect fracturing in the roof of broken soft coal seams

Indirect fracturing in the roof of broken soft coal seams has been demonstrated to be a feasible technology.In this work,the No.5 coal seam in the Hancheng block was taken as the research object.Based on the findings of true triaxial hydraulic fracturing experiments and field pilot under this technology and the cohesive element method,a 3D numerical model of indirect fracturing in the roof of broken soft coal seams was established,the fracture morphology propagation and evolution law under different conditions was investigated,and analysis of main controlling factors of fracture parameters was conducted with the combination weight method,which was based on grey incidence,analytic hierarchy process and entropy weight method.The results show that“士”-shaped fractures,T-shaped fractures,cross fractures,H-shaped fractures,and“干”-shaped fractures dominated by horizontal fractures were formed.Different parameter combinations can form different fracture morphologies.When the coal seam permeability is lower and the minimum horizontal principal stress difference between layers and fracturing fluid injection rate are both larger,it tends to form“士”-shaped fractures.When the coal seam permeability and minimum horizontal principal stress between layers and perforation position are moderate,cross fractures are easily generated.Different fracture parameters have different main controlling factors.Engineering factors of perforation location,fracturing fluid injection rate and viscosity are the dominant factors of hydraulic fracture shape parameters.This study can provide a reference for the design of indirect fracturing in the roof of broken soft coal seams.

Extended finite element-based cohesive zone method for modeling simultaneous hydraulic fracture height growth in layered reservoirs

In this study,a fully coupled hydromechanical model within the extended finite element method(XFEM)-based cohesive zone method(CZM)is employed to investigate the simultaneous height growth behavior of multi-cluster hydraulic fractures in layered porous reservoirs with modulus contrast.The coupled hydromechanical model is first verified against an analytical solution and a laboratory experiment.Then,the fracture geometry(e.g.height,aperture,and area)and fluid pressure evolutions of multiple hydraulic fractures placed in a porous reservoir interbedded with alternating stiff and soft layers are investigated using the model.The stress and pore pressure distributions within the layered reservoir during fluid injection are also presented.The simulation results reveal that stress umbrellas are easily to form among multiple hydraulic fractures’tips when propagating in soft layers,which impedes the simultaneous height growth.It is also observed that the impediment effect of soft layer is much more significant in the fractures suppressed by the preferential growth of adjoining fractures.After that,the combined effect of in situ stress ratio and fracturing spacing on the multi-fracture height growth is presented,and the results elucidate the influence of in situ stress ratio on the height growth behavior depending on the fracture spacing.Finally,it is found that the inclusion of soft layers changes the aperture distribution of outmost and interior hydraulic fractures.The results obtained from this study may provide some insights on the understanding of hydraulic fracture height containment observed in filed.