Discharge Coefficient of 3-in-1 Hole with Various Inclination Angle and Hole Pitch

Discharge coefficients of 3-in-1 hole of three inclination angles and three spacing between holes are presented which described the discharge behavior of a row of holes. The inlet and outlet of the 3-in-1 hole both have a 15° lateral expansion. The flow conditions considered are mainstream turbulence intensities and density ratios of secondary flow to mainstream. The momentum flux ratios varied in the range from 1 to 4. The comparison is made of the discharge coefficients of three shaped holes to find an optimal hole with low flow loss. The results show that the discharge coefficients of 3-in- 1 hole are highest in three shaped holes and therefore this article is focused on the measurements of discharge coefficients of 3-in-1 hole for various geometries and aerodynamic parameters. The measured results of 3-in-1 hole indicate that turbulence intensities, density ratios and momentum flux ratios have weak influence on discharge coefficients for inclination angle of 20°. The high turbulence intensity yields the small discharge coefficients for inclination angle of 45° and 90°. The increased both momentum flux ratios and density ratios lead to the increased discharge coefficients for inclination angle of 45° and 90°. The increased inclination angle causes the rapidly increased discharge coefficients. There is a weak dependence of discharge coefficients on hole pitches.

A criterion for flow mechanisms through vertical sharp-edged orifice and model for the orifice discharge coefficient

According to the experimental data of the orifice discharge coefficient for the flow through a vertical sharp-edged orifice obtained in the previous study of this work,a theoretical criterion for flow mechanisms of small orifice（viz.thick-walled orifice and nozzle） and large orifice（viz.thin-walled orifice） was proposed based on the ratio of orifice diameter to plate thickness.It can help explain the dissipation of the mechanical energy loss in the flow process for the two flow mechanisms under different operating regimes.The main parameters such as orifice diameter,plate thickness and liquid head were correlated,and a semi-empirical model for orifice coefficient and an empirical model with high precision at the stable region were developed.

Variation of Discharge Coefficient of Spillway and Broad Crested Weir Due to the Effectiveness of the Longitudinal Slope in a Non-horizontal Channel

In this work, experiment efforts were devoted to study the effect of the longitudinal slope of channel on the discharge coefficient for ogee spillway and broad crested weir. A comprehensive laboratory study including 17 tests was conducted to estimate the variation of the discharge coefficient due to variation of the longitudinal slope. It was shown that the discharge coefficient is significantly increasing with the increase of the slope by more than 90% or 75% and 80% or 70% for weir and spillway in case of excluding or including the approach velocity head, respectively. Also, CFD （computational fluid dynamics） with a help of Comsol-multyphsics program was used to simulate the problem. The program explained that the linear distribution of the hydraulic pressure changes to a non-linear distribution as the longitudinal slope is considered. Consequently, the values of the discharge coefficient are also affected.

Study on the discharge coefficient of wind-driven naturally ventilated Chinese solar greenhouses

The Chinese solar greenhouse(CSG)is a prevalent feature in agricultural practices within China.Nevertheless,the regulation of natural ventilation within this architectural structure remains suboptimal.Consequently,the development of a natural ventilation model becomes imperative for the effective management of the greenhouse environment.Of particular significance within these models is the consideration of the discharge coefficient as a pivotal parameter.Conducting a multi-case investigation into the variable-dependent discharge coefficient is crucial for both practical application and model advancement.This research delved into the impact of various factors,including the upper-lower vents area ratio(A_(up)/A_(low)),vent-greenhouse area ratio(A_(low)/A_(greenhouse)),lower vent position height(h/H),the incident angle of the external wind,and altitude,on the discharge coefficient(C_(d))of CSG.A CFD model was developed for a scaled CSG with validation conducted through field experiments and wind tunnel tests.Results indicated a 61.6%reduction in C_(d)on average corresponding to an 80%decrease in A_(up)/A_(low).C_(d)levels remained consistent following the attainment of an A_(up)/A_(low)ratio of 1.0.Besides,there was an average increase of 52.5%in C_(d)levels for every 0.09 decline in h/H,attributed to the blocking effect of the cover.Moreover,the ventilation rate and the pressure coefficient difference were utilized to construct a model of C_(d)pertaining to greenhouse design and ventilation operation,exhibiting a notable accuracy level of R^(2)=0.95.Furthermore,the blocking effect of higher h/H was relieved as the incident angleθdecreased under the windward conditions.The increase in A_(up)/A_(low)and the decrease in A_(low)/A_(greenhouse)were identified as crucial factors contributing to the growth of C_(d)under leeward conditions.Ultimately,the high-altitude environment led to a rise in C_(d)levels in contrast to the low-altitude region.The increasing rate of C_(d)correlated positively with A_(low)/A_(greenhouse)and h/H initially,but exhibited a decline once A_(low)/A_(greenhouse)reached 0.036,remaining stable thereafter once h/H reached 0.18.In summary,a comprehensive examination of the discharge coefficient of CSG was undertaken,addressing a significant knowledge deficiency and laying the groundwork for advancements in the natural ventilation model and the intelligent control system for CSG.

The Effect of Diffuser Angle on the Discharge Coefficient of a Miniature Critical Nozzle

Many researches on critical nozzles have been performed to accurately measure the mass flow rate of gas flow,and to standardize the performance as a flow meter.Recently,much interest is being paid on the measurement of very small mass flow rate in industry fields such as MEMS applications.However,the design and performance data of the critical nozzles obtained so far have been applied mainly to the critical nozzles with comparatively large diameters,and the works available on miniature critical nozzles are lacking.In the present study,a computational fluid dynamics method has been applied to investigate the influence of the diffuser angle on discharge coefficient of the miniature critical nozzles.In computations,the throat diameter of critical nozzle is varied from 0.2 mm to 5.0 mm and the diffuser angle is changed from 2 deg to 8 deg.The computational results are validated with some experimental data available.The results show that the present computational results predict appropriately the discharge coefficient of the gas flows through miniature critical nozzles.It is known that the discharge coefficient is considerably influenced by the diffuser angle,as the throat diameter of nozzle becomes small below a certain value.This implies that the miniature critical nozzles should be carefully designed.

Three industries and wastewater and COD discharge of Beijing

With the swift development of economy, the water quality of Beijing is becoming worse day by day and hampers the sustainable development obviously. In this paper, the current conditions of the municipal wastewater structure in the industrial sectors are analysed and discussed in terms of the indicators, such as direct wastewater\|discharge coefficient, complete wastewater\|discharge coefficient, direct discharge coefficient of COD and complete discharge coefficient of COD, by taking a year of 1990s as the base year. Some countermeasures are studied and the corresponding recommendations are put forward in order to improve the water environment in Beijing. This provides a scientific ground for coordinating the relationship between the aquatic environment and economic growth in this city.

Generation and Discharge of Pollutants in Closed Aquaculture

[Objectives]To gain an in-depth understanding of pollutant generation and discharge from closed aquaculture.[Methods]In 2018,the pollutant generation and discharge coefficients of 7 farming modes in 16 farming bases were calculated and analyzed.[Results]A total of 28 pollutant generation coefficients and 28 pollutant discharge coefficients were obtained,and the generation and discharge of pollutants in closed aquaculture were grasped preliminarily.Compared with the data of the first census of pollutions sources published by the state in 2008,7 kinds of pollution generation coefficients increased,while 14 kinds decreased;and 4 kinds of pollutant discharge coefficients increased,while 17 kinds decreased.[Conclusions]In recent years,the pollutant generation and discharge coefficients of aquaculture show a decreasing trend.

Experimental Investigation of Discharge Capacity of Labyrinth Weirs with and without Nappe Breakers

Labyrinth weirs provide higher discharge capacity than conventional weirs, with the ability to pass large flows at comparatively low heads. Labyrinth weirs are primarily used as spillways for dams where the spillway width is restricted. In recent years, many research investigations have considered the hydraulic performance of labyrinth weirs, particularly as dependent on the geometric features. The previous work has improved the design basis for such weirs. However, their design still requires experimentally derived and generalized performance curves. It is especially important to observe the behavior of the weir nappe to ensure the design provides hydraulic optimization and to account for pressure fluctuations, possible vibrations, resonance effect, noise and flow surging. In the present study, discharge coefficients were experimentally determined for both circular labyrinth weirs and sharp crested trapezoidal labyrinth weirs of varying side wall angle (α). Additional studies were completed with nappe breakers included to reduce the impact of vibration on the labyrinth weirs. In general, the test data indicated that nappe breakers placed on the trapezoidal labyrinth weirs and circular labyrinth weirs reduced the discharge coefficient by up to 4% of the un-amended weir.

Experimental Investigation on Flow and Heat Transfer of Jet Impingement inside a Semi-Confined Smooth Channel

Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000),orifice-to-target spacing(zn=1d—4d)and jet-to-jet pitches(xn=3d—5d,yn=3d—5d)on the convective heat transfer coefficient and discharge coefficient are revealed.For a single-row jets normal impingement,the impingement heat transfer is enhanced with the increase of impingement Reynolds number or the decrease of spanwise jet-to-jet pitch.The highest local heat transfer is achieved when zn/dis 2.For the double-row jets normal impingement,the laterally-averaged Nusselt number distributions in the vicinity of the first row jets impinging stagnation do not fit well with the single-row case.The highest local heat transfer is obtained when zn/dis 1.A smaller jetto-jet pitch generally results in a lower discharge coefficient.The discharge coefficient in the double-row case is decreased relative to the single-row case at the same impingement Reynolds number.

CFD Simulation of Orifice Flow in Orifice-type Liquid Distributor

In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in different diameters and liquid heights has been realized using the shear stress transport(SST)turbulence model and the Gamma Theta transition(GTT)model.In the ANSYS CFX software,two models are used in conjunction with an automatic wall treatment which allows for a smooth shift from a wall function(WF)to a low turbulent-Re near wall formulation(LTRW).The results of the models coupled with LTRW are closer to the experimental results compared with the models with WF,indicating that LTRW is more appropriate for the prediction of boundary layer characteristics of orifice flow.Simulation results show that the flow conditions of orifices change with the variation of liquid height.With respect to the turbulence in orifice,the SST model coupled with LTRW is recommended.However,with respect to the transition to turbulence in orifice with an increase in liquid height,the predictions of GTT model coupled with LTRW are superior to those obtained using other models.

A swirling jet from a nozzle with tangential inlets and its characteristics in breaking-up rocks

In order to apply a swirling jet to a PDC drill bit, the nozzle performance influenced by nozzle inlet geometric parameters and rock breaking tests under submerged conditions were studied. Numerical simulation was used to study the influence of the nozzle structure on the swirling intensity and nozzle discharge coefficient. Simulation results indicate that spreading angle of the swirling jet is greater than that of＂ the non-swirling jet, and the swirling intensity of the jet is strongly influenced by the length of the nozzle body but weakly by the number of tangential inlets. Rock breaking tests were conducted to evaluate the performance of the swirling jet. It is found that the swirling jet shows a lower threshold pressure to break the rock samples and could break rock more efficiently compared with the non-swirling jet.

Experimental and numerical analysis of flow over a rectangular full-width sharp-crested weir

Weirs are a type of hydraulic structure, used for water level adjustment, flow measurement, and diversion of water in irrigation systems. In this study, experiments were conducted on sharp-crested weirs under free-flow conditions and an optimization method was used to determine the best form of the discharge coefficient equation based on the coefficient of determination （R2） and root mean square error （RMSE）. The ability of the numerical method to simulate the flow over the weir was also investigated using Fluent software. Results showed that, with an increase of the ratio of the head over the weir crest to the weir height （h/P）, the discharge coefficient decreased nonlinearly and reached a constant value of 0.7 for hiP 〉 0.6. The best form of the discharge coefficient equation predicted the discharge coefficient well and percent errors were within a ±5% error limit. Numerical results of the discharge coefficient showed strong agreement with the experimental data. Variation of the discharge coefficient with Reynolds numbers showed that the discharge coefficient reached a constant value of 0.7 when hiP 〉 0.6 and Re 〉 20000.

Structure and Flow Characteristics of Flat Fan Nozzles with a Single Orifice Formed by a Rectangular Cut

The flat fan nozzle with a single orifice formed by a rectangular cut at the nozzle exit through a semi-ellipsoid blind end was developed. The flow rate characteristic of the nozzle was analyzed. Theoretical analysis shows that the discharge coefficient of the nozzle is a function of the ratio of the projected exit flow area to the cross sectional area of the nozzle input section. Water spraying experiment results show that the discharge coefficient increases with the increase of the ratio of the projected exit flow area to the cross sectional area of the nozzle input section when the rectangular cut depth doesn't exceed the distance from the center of the hemisphere to the nozzle end; conversely,the discharge coefficient decreases with the increase of the ratio; for a given nozzle,the discharge coefficient varies with Reynolds number.

Flow over Broad Crested Weirs： Comparison of 2D and 3D Models

The flow over broad-crested weirs was simulated by computational fluid dynamic model. The water surface profile over broad crested weir was measured in a laboratory model and validated using two and three dimensional Fluent programs. The Reynolds Averaged Navier-Stokes equations coupled with the turbulent standard （k-ε） model and volume of fluid method were applied to estimate the water surface profile. The results of numerical model were compared with experimental results to evaluate the ability of model in describing the behaviour of water surface profile over the weir. The results indicated that the 3D required more time in comparison with 2D results and the flow over weir changed from subcritical flow at the upstream （U/S） face of weir to critical flow over the crest and to supercritical flow at downstream （D/S）. A reasonable agreement was noticed between numerical results and experimental observations with mean error less than 2 %.

Flow Loss in Screens： A Fresh Look at Old Correlation

Pressure losses in flow components are generally characterized either by pressure loss coefficients or by discharge coefficients. The pressure drop for incompressible flow across a screen of fractional free area a is often calculated from widely used correlation provided in Perry＇s Handbook. This correlation was developed based on experimental work which have covered a wide range of fractional free area （a = 0.14 to 0.79）. The present work aims at validation for a flow in plain square mesh screen with a particular fractional free area （porosity, a） of 0.25 using CFD （Computational Fluid Dynamics） approach. The simulations are carried out for wide range of screen Reynolds number （Re = 0.1 to 105） covering both laminar and turbulent flow regimes. Initial simulations are carried out for incompressible fluid （water） and further extended to compressible fluid （air）. Discharge coefficients obtained from the simulations are compared with experimental values. Effect of compressibility on discharge coefficients is described.

Investigation on film cooling characteristics from a row of converging slot-holes on flat plate

Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles （converging slot-hole） on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vortices configuration. A pair of counter rotating vortices originate from the edge of slot, not from the centerline of film holes and the rotating direction is contrary to conventional cylindrical hole. The heat transfer coefficient ratio is a tittle bigger for the console case than conventional cylindrical hole, and the discharge coefficient for a console is larger than that for cylindrical film cooling hole.

Drag prediction method of powered-on civil aircraft based on thrust drag bookkeeping

A drag prediction method based on thrust drag bookkeeping（TDB） is introduced for civil jet propulsion/airframe integration performance analysis.The method is derived from the control volume theory of a powered-on nacelle.Key problem of the TDB is identified to be accurate prediction of velocity coefficient of the powered-on nacelle.Accuracy of CFD solver is validated by test cases of the first AIAA Propulsion Aerodynamics Workshop.Then the TDB method is applied to thrust and drag decomposing of a realistic aircraft.A linear relation between the computations assumed free stream Mach number and the velocity coefficient result is revealed.The thrust losses caused by nozzle internal drag and pylon scrubbing are obtained by the isolated nacelle and mapped on to the in-flight whole configuration analysis.Effects of the powered-on condition are investigated by comparing through-flow configuration with powered-on configuration.The variance on aerodynamic coefficients and pressure distribution is numerically studied.

Fluid dynamic modeling of junctions in internal combustion engine inlet and exhaust systems

The modeling of inlet and exhaust systems of internal combustion engine is very important in order to evaluate the engine performance.This paper presents new pressure losses models which can be included in a one dimensional engine simulation code.In a first part,a CFD analysis is made in order to show the importance of the density in the modeling approach.Then,the CFD code is used,as a numerical test bench,for the pressure losses models development.These coefficients depend on the geometrical characteristics of the junction and an experimental validation is made with the use of a shock tube test bench.All the models are then included in the engine simulation code of the laboratory.The numerical calculation of unsteady compressible flow,in each pipe of the inlet and exhaust systems,is made and the calculated engine torque is compared with experimental measurements.

Experimental study on film cooling performance of imperfect holes

An experimental study is made to investigate the film cooling performance of imperfect holes due to in-hole blockage over a flat plate. A specifically pyramid-shaped element is used to simulate the in-hole blockage. Six in-hole blockage orientations（such as leading-inlet, leading-middle,leading-exit, trailing-inlet, trailing-middle and trailing-exit） and four blocking ratios（ranging from 0.1 to 0.4） are taken into considerations. Based on the experimental results, the influences of in-hole blockage on the film cooling effectiveness and discharge coefficient under typical blowing ratios are analyzed. It is confirmed that the in-hole blockage results in a reduction of discharge coefficient related to the perfect film cooling holes, especially for the leading-exit and trailing-inlet orientations with a big blocking ratio. However, in the view of film cooling effectiveness, the in-hole blockage shows complicated affecting roles. In general, except for the leading-exit orientation, the in-hole blockages produce detrimental influence on the film cooling effectiveness.

Experimental Investigations of the Three-DimensionalFlow in a Large Deflection Turbine Cascade with Tip Clearance

Results obtained from an experbontal study of the threedimensional flow survey within and exit of a large defiection linear turbine cascade are presented for a tip clearance levels of 0.08, 1.5, 3.0 percent of chord and compared with the help of boundary layer probes and that within and exit of a blade passage was done with a miniaturised five hole probe. End wall and blade tip surface static pressures were also obtained, in addition to flow visualisation studies. A strong horse-shoe vortex forms in front of the leading edge for zero clearance whereas this vortex does not appear for 3 percent clearance indicating that for large clearance the pressure forces have dominating infiuence than the viscous forces. In addition to normally known clearance vortex, a small tip separation vortex was noticed on the blade tip surface inside the tip gap. Due to the area contraction caused by the tip separation vortex, the fluid movign towards the tip gap from the pressure side is accelerated. Downstream of the vortex, the endwall pressure increases due to flow mixing. Both vortices increase in size and strength along the chord. The miring is incomplete in the aft portion of the blade. The tip gap velocity profiles exhibit wak like characteristics especially at axial positions where the mixing is incomplete. The passage vortex in the present investigations did not diminish with increase in clearance. The discharge coefhcient and the total pressure loss coefficient within the tip gap show similar tendency with lower values near the leading and trailing edge regions.