期刊文献+
共找到990篇文章
< 1 2 50 >
每页显示 20 50 100
Temperature effect on nanotwinned Ni under nanoindentation using molecular dynamic simulation
1
作者 何茜 徐子翼 倪玉山 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第1期603-612,共10页
Temperature effect on atomic deformation of nanotwinned Ni (nt-Ni) under localized nanoindentation is investigated in comparison with nanocrystalline Ni (nc-Ni) through molecular simulation.The nt-Ni exhibits enhanced... Temperature effect on atomic deformation of nanotwinned Ni (nt-Ni) under localized nanoindentation is investigated in comparison with nanocrystalline Ni (nc-Ni) through molecular simulation.The nt-Ni exhibits enhanced critical load and hardness compared to nc-Ni,where perfect,stair-rod and Shockley dislocations are activated at (111),(111) and (111) slip planes in nt-Ni compared to only SSockley dislocation nucleation at (111) and (111) slip planes of nc-Ni.The nt-Ni exhibits a less significant indentation size effect in comparison with nc-Ni due to the dislocation slips hindrance of the twin boundary.The atomic deformation associated with the indentation size effect is investigated during dislocation transmission.Different from the decreasing partial slips parallel to the indenter surface in nc-Ni with increasing temperature,the temperaturedependent atomic deformation of nt-Ni is closely related to the twin boundary:from the partial slips parallel to the twin boundary (~10 K),to increased confined layer slips and decreased twin migration(300 K–600 K),to decreased confined layer slips and increased dislocation interaction of dislocation pinning and dissociation (900 K–1200 K).Dislocation density and atomic structure types through quantitative analysis are implemented to further reveal the above-mentioned dislocation motion and atomic structure alteration.Our study is helpful for understanding the temperature-dependent plasticity of twin boundary in nanotwinned materials. 展开更多
关键词 NANOINDENTATION twin boundary plastic deformation molecular dynamics simulation
下载PDF
Molecular Dynamic Simulation on the Absorbing Process of Isolating and Coating of α-olefin Drag Reducing Polymer 被引量:1
2
作者 李冰 盛翔 +6 位作者 邢文国 董桂霖 刘永军 张长桥 陈祥俊 周宁宁 秦占波 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2010年第6期630-636,745,共8页
The absorbing process in isolating and coating process of α-olefin drag reducing polymer was studied by molecular dynamic simulation method, on basis of coating theory of α-olefin drag reducing polymer particles wit... The absorbing process in isolating and coating process of α-olefin drag reducing polymer was studied by molecular dynamic simulation method, on basis of coating theory of α-olefin drag reducing polymer particles with polyurethane as coating material. The distributions of sodium laurate, sodium dodeeyl sulfate, and sodium dodeeyl benzene sulfonate on the surface of α-olefin drag reducing polymer particles were almost the same, but the bending degrees of them were obviously different. The bending degree of SLA molecules was greater than those of the other two surfactant molecules. Simulation results of absorbing and accumulating structure showed that, though hydrophobie properties of surfactant molecules were almost the same, water density around long chain sulfonate sodium was bigger than that around alkyl sulfate sodium. This property goes against useful absorbing and accumulating on the surface of α-olefin drag reducing polymer particles; simulation results of interactions of different surfactant and multiple hydroxyl compounds on surface of particles showed that, interactions of different surfaetant and one kind of multiple hydroxyl compound were similar to those of one kind of surfaetant and different multiple hydroxyl compounds. These two contrast types of interactions also exhibited the differences of absorbing distribution and closing degrees to surface of particles. The sequence of closing degrees was derived from simulation; control step of addition polymerization interaction in coating process was absorbing mass transfer process, so the more closed to surface of particle the multiple hydroxyl compounds were, the easier interactions With isoeyanate were. Simulation results represented the compatibility relationship between surfactant and multiple hydroxyl compounds. The isolating and coating processes of α-olefin drag reducing polymer were further understood on molecule and atom level through above simulation research, and based on the simulation, a referenced theoretical basis was provided for practical optimal selection and experimental preparation of α-olefin drag reducing polymer particles suspension isolation agent. 展开更多
关键词 Molecular dynamic simulation Coating process Multiple hydroxyl compound Addition polymerization Optimal selection Isolation agent
下载PDF
Molecular Dynamic Simulation of Melting Points of Trans-1,4,5,8- tetranitro-1,4,5,8-tetraazadacalin (TNAD) with Some Propellants
3
作者 李小红 居学海 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2014年第4期412-418,J0001,共8页
Molecular dynamic simulation was employed to predict the melting points Tm of TNAD/HMX, TNAD/RDX, TNAD/DINA, and TNAD/DNP systems (tans-1,4,5,8- tetranitro-1,4,5,8-tetraazadacalin (TNAD), dinitropiperazine (DNP),... Molecular dynamic simulation was employed to predict the melting points Tm of TNAD/HMX, TNAD/RDX, TNAD/DINA, and TNAD/DNP systems (tans-1,4,5,8- tetranitro-1,4,5,8-tetraazadacalin (TNAD), dinitropiperazine (DNP), cyclotetramethylenetetranitroamine (HMX), cyclotrimethylenetrinitramine (RDX), and N-nitrodihydroxyethylaminedinitrate (DINA)). Tm was determined from the inflexion point on the curve of mean specific volume vs. temperature. The result shows that the Tm values of TNAD/HMX, TNAD/RDX, and TNAD/DINA systems are 500, 536, and 488 K, respectively. The TNAD/DNP system has no obvious Tm value, which shows the system is insoluble. Using Tm, the solubility of the four systems was analyzed. The radial distribution functions of the four systems were analyzed and the main intermolecular forces between TNAD and other energetic components are short-range interactions. The better the solubility is, the stronger the intermoleenlar interaction is. In addition, the force field energy at different temperature was also analyzed to predict Tm of the four systems. 展开更多
关键词 Melting point Molecular dynamic simulation Radial distribution function Force field energy Trans-1 4 5 8-tetranitro-1 4 5 8-tetraazadaealin (TNAD)
下载PDF
Dynamic Simulation of Tracked Vehicle Using the DADS Software 被引量:1
4
作者 郭军 王申申 李晓雷 《Journal of Beijing Institute of Technology》 EI CAS 2001年第4期370-375,共6页
The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynam... The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system. 展开更多
关键词 DADS software tracked vehicle dynamic simulation
下载PDF
FATIGUE LIFE PREDICTION OF CRANKSHAFT MADE OF MATERIAL 48MnV BASED ON FATIGUE TESTS,DYNAMIC SIMULATION AND FEA 被引量:13
5
作者 ZHANG Guoqing PU Gengqiang WANG Chengtao 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2006年第2期307-311,共5页
S-N curve and fatigue parameters of 48MnV are obtained using small sample tests and staircase or up and down method, which paves the way for predicting fatigue life of crankshaft made of 48MnV. The fatigue life of the... S-N curve and fatigue parameters of 48MnV are obtained using small sample tests and staircase or up and down method, which paves the way for predicting fatigue life of crankshaft made of 48MnV. The fatigue life of the crankshaft of a six-cylinder engine is calculated using different damage models such as S-N method, normal strain approach, Smoth-Watson-Topper (SWT)Bannantine approach, shear strain approach, and Fatemi-Socie method based on dynamic simulation and finite element analysis (FEA) of crankshaft. The results indicate that the traditional calculation is conservative and the residual fatigue life of crankshaft is sufficient to maintain next life cycle if the crankshaft is remanufactured after its end of life. 展开更多
关键词 48MnV Multiaxial fatigue CRANKSHAFT dynamic simulation Finite element analysis (FEA)
下载PDF
Design and dynamic simulation of hydraulic system of a new automatic transmission 被引量:15
6
作者 王书翰 徐向阳 +3 位作者 刘艳芳 戴振坤 TEN BERGE P 曲巍 《Journal of Central South University》 SCIE EI CAS 2009年第4期697-701,共5页
A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic syste... A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic system of AT was established by ITI-SimulationX. Simulation results and theoretical design results were compared to confirm the simulation model. Based on the confirmed simulation model, the simulation results of pressure and flow of the hydraulic system were analyzed. The dynamic simulation method is very helpful for designing and analyzing the performance of hydraulic system and further optimization design. The theoretical design method and dynamic simulation model are feasible for the real industrial applications. The research results can be used in hydraulic system design and optimization. 展开更多
关键词 automatic transmission hydraulic system dynamic simulation
下载PDF
Theoretical design and dynamic simulation of new mining paths of tracked miner on deep seafloor 被引量:8
7
作者 戴瑜 刘少军 《Journal of Central South University》 SCIE EI CAS 2013年第4期918-923,共6页
With comprehensive considerations of the operational safety and collection efficiency for the tracked miner collecting the seafloor poly-metallic nodules, two new improved mining paths for the miner on the deep seaflo... With comprehensive considerations of the operational safety and collection efficiency for the tracked miner collecting the seafloor poly-metallic nodules, two new improved mining paths for the miner on the deep seafloor were proposed. Compared to the conventional mining path, the design principles and superiorities of the two new paths are that the miner turning with relative long radius should avoid large sinkage and high slip, so as to ensure its operational safety, while the space between its straight-line trajectories before and after the turning is optimum, which is designed as the total width of the miner, and collect nodules as more as possible, so as to ensure its collection efficiency. To realize the new mining paths, theoretical designs and quantitative calculations were carried out to determine the exact positions for the speed controls of the miner during its whole operation process. With the new dynamic model of the miner, and through regulations of the speeds of the left and right tracks of the miner on the exact motion positions according to the theoretical calculations, the two new improved mining paths for the miner on the seafloor were successfully simulated, thus the turning radius of the miner in the simulation is about 21.8 m, while the distance between the straight-line trajectories before and after the turning is about 5.2 m. The dynamic simulation results preliminarily prove the feasibility of these two new mining paths, and further can provide important theoretical guidance and useful technical reference for the practical tracked miner operation and control on the seafloor. 展开更多
关键词 deep ocean mining tracked miner single-body model mesh element model collection efficiency mining path dynamic simulation
下载PDF
Dynamic Simulation and Analysis of Industrial Purified Terephthalic Acid Solvent Dehydration Process 被引量:7
8
作者 李澄非 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2011年第1期89-96,共8页
Dynamic model for dehydration process of industrial purified terephthalic acid solvent is investigated to understand and characterize the process.A temperature differential expression is presented,which ensures the eq... Dynamic model for dehydration process of industrial purified terephthalic acid solvent is investigated to understand and characterize the process.A temperature differential expression is presented,which ensures the equation to convergence and short computation time.The model is used to study the dynamic behavior of an azeotropic distillation column separating acetic acid and water using n-butyl acetate as the entrainer.Responses of the column to feed flow and aqueous reflux flow are simulated.The movement of temperature front is also simulated.The comparison between simulation and industrial values shows that the model and algorithm are effective.On the basis of simulation and analysis,control strategy,online optimization and so on can be implemented effectively in dehydration process of purified terephthalic acid solvent. 展开更多
关键词 dynamic simulation purified terephthalic acid solvent dehydration AZEOTROPY
下载PDF
Succession Features and Dynamic Simulation of Subalpine Forest in the Gongga Mountain, China 被引量:7
9
作者 CHENGGenwei LUOJi 《Journal of Mountain Science》 SCIE CSCD 2004年第1期29-37,共9页
The Gongga Mountain of eastern Tibet Plateau is a representative of the alpine regions with high peaks and deep valleys. Climate change over the last thousand years has controlled the dynamics of glacier and debris fl... The Gongga Mountain of eastern Tibet Plateau is a representative of the alpine regions with high peaks and deep valleys. Climate change over the last thousand years has controlled the dynamics of glacier and debris flow occurrence, which resulted in substantial changes in the mountainous environment. The authors surveyed the community structure of primary forests in Gongga Mountain and forest succession processes in woodland plots. The changing features in the subalpine environment are discussed in this paper. Tree species and sizes between the glacier shrinking areas and debris flow fans in Hailuogou Valley are compared. The pioneer species that settle in debris flow fans and the glacier shrinking areas are Salix spp. and Populus purdomii. Abies fabri and Picea brachytyla are the climax tree species. The succession process of primary vegetation in Hailuogou (2700 ~ 3200 m) can be divided into four stages: Slash surface (20~ 200 yr) Salix-Populus seeding community (10 ~ 30 yr) Populus-Salix sapling community (30 ~ 100 yr) Populus-Abies mixed community (50 ~ 100 yr) Abies-Picea climax In a natural and undisturbed environment, trees compete for light, water and nutrients. Disaster disturbance in mountains is a very important driving factor for regeneration of woody plants. Repeated destruction of forests by glacier movement or debris flows generated additional forest gaps that allow young plants to grow. In this study the Gongga Forest Succession Model (GFSM) was developed for simulation of forest community succession processes on different scales in Gongga Mountain. A soil succession module was added to the GFSM model to simulate soil formation and chemical element change of woodland. In order to represent major features of forests in Southwestern China, many field works has been done to identify ecological parameters of various trees in the subalpine region. On the basis of simulation of tree life history, the GFSM combines forest succession with soil change in both material components and nutrition content. The Monte-Carlo method was applied to simulate random weather fluctuation and the uncertainty of tree death. These modeled processes agreed with the field investigation results in this region. The elevation distribution of different tree species was also simulated; and the results are consistent with field observations of ecological features of tree species. The modeling approach reflects well the succession dynamics of primary forests in Southwestern China. These results are very useful for improving the management policies and prediction technology for restoration and conservation of primary forests in Southwestern China. 展开更多
关键词 Gongga Mountain forest succession dynamic simulation forest gap model
下载PDF
Critical anomaly and finite size scaling of the self-diffusion coefficient for Lennard Jones fluids by non-equilibrium molecular dynamic simulation 被引量:4
10
作者 Ahmed Asad 吴江涛 《Chinese Physics B》 SCIE EI CAS CSCD 2011年第10期362-367,共6页
We use non-equilibrium molecular dynamics simulations to calculate the self-diffusion coefficient, D, of a Lennard Jones fluid over a wide density and temperature range. The change in self-diffusion coefficient with t... We use non-equilibrium molecular dynamics simulations to calculate the self-diffusion coefficient, D, of a Lennard Jones fluid over a wide density and temperature range. The change in self-diffusion coefficient with temperature decreases by increasing density. For density ρ* = ρσ3 = 0.84 we observe a peak at the value of the self-diffusion coefficient and the critical temperature T* = kT/ε = 1.25. The value of the self-diffusion coefficient strongly depends on system size. The data of the self-diffusion coefficient are fitted to a simple analytic relation based on hydrodynamic arguments. This correction scales as N-α, where α is an adjustable parameter and N is the number of particles. It is observed that the values of a 〈 1 provide quite a good correction to the simulation data. The system size dependence is very strong for lower densities, but it is not as strong for higher densities. The self-diffusion coefficient calculated with non-equilibrium molecular dynamic simulations at different temperatures and densities is in good agreement with other calculations fronl the literature. 展开更多
关键词 self-diffusion coefficient non-equilibrium molecular dynamic simulation Lennard Jonesfluid critical dynamics
下载PDF
3-D fracture network dynamic simulation based on error analysis in rock mass of dam foundation 被引量:4
11
作者 ZHONG Deng-hua WU Han +2 位作者 WU Bin-ping ZHANG Yi-chi YUE Pan 《Journal of Central South University》 SCIE EI CAS CSCD 2018年第4期919-935,共17页
Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network mode... Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network model and measured data,a 3-D fracture network dynamic modeling method based on error analysis was proposed.Firstly,errors of four fracture volume density estimation methods(proposed by ODA,KULATILAKE,MAULDON,and SONG)and that of four fracture size estimation methods(proposed by EINSTEIN,SONG and TONON)were respectively compared,and the optimal methods were determined.Additionally,error index representing the deviation between fracture network model and measured data was established with integrated use of fractal dimension and relative absolute error(RAE).On this basis,the downhill simplex method was used to build the dynamic modeling method,which takes the minimum of error index as objective function and dynamically adjusts the fracture density and size parameters to correct the error index.Finally,the 3-D fracture network model could be obtained which meets the requirements.The proposed method was applied for 3-D fractures simulation in Miao Wei hydropower project in China for feasibility verification and the error index reduced from 2.618 to 0.337. 展开更多
关键词 rock mass of dam foundation 3-D fracture network dynamic simulation fractal dimension error analysis relative absolute error(RAE) downhill simplex method
下载PDF
Dynamic simulation and efficiency analysis of beam pumping system 被引量:3
12
作者 邢明明 董世民 +2 位作者 童志雄 田然凤 陈慧玲 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第9期3367-3379,共13页
An improved whole model of beam pumping system was built. In the detail, for surface transmission system(STS), a new mathematical model was established considering the influence of some factors on the STS's torsio... An improved whole model of beam pumping system was built. In the detail, for surface transmission system(STS), a new mathematical model was established considering the influence of some factors on the STS's torsional vibration, such as the time variation characteristic of equivalent stiffness of belt and equivalent rotational inertia of crank. For the sucker rod string(SRS), an improved mathematical model was built considering the influence of some parameters on the SRS's longitudinal vibration, such as the nonlinear friction of plunger, hydraulic loss of pump and clearance leakage. The dynamic response and system efficiency of whole system were analyzed. The results show that there is a jumping phenomenon in the amplitude frequency curve, and the system efficiency is sensitive to motor power, pump diameter, stroke number, ratio of gas and oil, and submergence depth. The simulation results have important significance for improving the efficiency of beam pumping system. 展开更多
关键词 beam pumping system surface transmission system(STS) sucker rod string(SRS) system efficiency dynamic simulation
下载PDF
Optimal Design and Dynamic Simulation of Mountain Bike with Rear Suspension 被引量:2
13
作者 BU Yan XIANG Zhongxia +2 位作者 HUANG Tian ZHANG Xu WANG Xinghua 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2009年第1期21-26,共6页
This paper investigates the dynamic design methodology of mountain bikes with rear suspension. Firstly, a multi-rigid body dynamic model of rider and mountain bike coupled system is constructed. The rider model includ... This paper investigates the dynamic design methodology of mountain bikes with rear suspension. Firstly, a multi-rigid body dynamic model of rider and mountain bike coupled system is constructed. The rider model includes 19 skeletons, 18 joints and 118 main muscles. Secondly, to validate the feasibility of the model, an experiment test is designed to reflect the real cycling status. Finally, aiming at enhancing the performance of the rider vibration comfort, the scale parameters of rear suspension are optimized with computer simulation and uniform design. The mathematical model in the vibration performance and the design variables is constructed with regression analysis. The result shows that when the length of side link is 90 mm, the length of connected rod is 336.115 1 mm and the included angle between absorber and side link is 60°, the mountain bike has better vibration comfort. This study and relevant conclusions are of practical importance to the design of the mountain bike's rear suspension system. 展开更多
关键词 mountain bike model building dynamic simulation experiment test vibrant comfort optimal design
下载PDF
Process Modeling and Dynamic Simulation for EAST Helium Refrigerator 被引量:2
14
作者 陆小飞 傅鹏 +2 位作者 庄明 邱立龙 胡良兵 《Plasma Science and Technology》 SCIE EI CAS CSCD 2016年第6期693-698,共6页
In this paper,the process modeling and dynamic simulation for the EAST helium refrigerator has been completed.The cryogenic process model is described and the main components are customized in detail.The process model... In this paper,the process modeling and dynamic simulation for the EAST helium refrigerator has been completed.The cryogenic process model is described and the main components are customized in detail.The process model is controlled by the PLC simulator,and the realtime communication between the process model and the controllers is achieved by a customized interface.Validation of the process model has been confirmed based on EAST experimental data during the cool down process of 300-80 K.Simulation results indicate that this process simulator is able to reproduce dynamic behaviors of the EAST helium refrigerator very well for the operation of long pulsed plasma discharge.The cryogenic process simulator based on control architecture is available for operation optimization and control design of EAST cryogenic systems to cope with the long pulsed heat loads in the future. 展开更多
关键词 EAST cryogenic system helium refrigerator process modeling dynamic simulation
下载PDF
Dynamic Simulation of Shear-induced Particle Migration in a Two-dimensional Circular Couette Device 被引量:2
15
作者 余钊圣 邵雪明 Roger Tanner 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2007年第3期333-338,共6页
The shear-induced migration of neutrally-buoyant non-colloidal circular particles in a two-dimensional circular Couette flow is investigated numerically with a distributed Lagrange multiplier based fictitious domain m... The shear-induced migration of neutrally-buoyant non-colloidal circular particles in a two-dimensional circular Couette flow is investigated numerically with a distributed Lagrange multiplier based fictitious domain method.The effects of inertia and volume fraction on the particle migration are examined.The results indicate that inertia has a negative effect on the particle migration.In consistence with the experimental observations,the rapid migration of particles near the inner cylinder at the early stage is observed in the simulation,which is believed to be related to the chain-like clustering of particles.The migration of circular particles in a plane Poiseuille flow is also examined in order to further confirm the effect of such clustering on the particle migration at early stage.There is tendency for the particles in the vicinity of outer cylinder in the Couette device to pack into concentric rings at late stage in case of high particle concentration. 展开更多
关键词 shear-induced particle migration dynamic simulation circular Couette flow CLUSTERING
下载PDF
Dynamic simulations of the late MIS 3 transgressions in the East China Sea and southern Yellow Sea,China 被引量:2
16
作者 YE Liangtao YU Ge +1 位作者 LIAO Mengna LI Yongfei 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2016年第10期48-55,共8页
Abundant evidences of higher sea levels from Jiangsu and Fujian coasts have proved a marine transgression event during 30–40 ka BP, suggesting that there was a stage with high sea level and a warm climate when ice sh... Abundant evidences of higher sea levels from Jiangsu and Fujian coasts have proved a marine transgression event during 30–40 ka BP, suggesting that there was a stage with high sea level and a warm climate when ice sheets shrank in the Northern Hemisphere. The duration of 30–40 ka BP spanned a period in the late Marine Isotope Stage 3(MIS 3) and was in nature an interstadial epoch during the Last Glacial period of the Quaternary. Different from the glacial period with a cold climate, this marine transgression considered as a penultimate higher sea level during the Quaternary remains a puzzle that why the evidence is contrary to the Quaternary glacial theory. It is important to understand sea level rise for these areas sensitively responding to the global changes in the future. To recognize the key issues on sea level changes, the eustatic sea level(H_S) was defined as the glaciation-climateforced sea levels, and the relative sea level change(H_R) was defined as that a sea level record was preserved in sediment that experienced multiple secondary actions of land and sea effects. On the basis as defined above, we constructed multi-level models of climate-driven glacio-eustatic changes and land-sea systems. By integrating data sets from eight borehole cores and prescribing the boundary conditions, we simulated the changes of HS and HR in the East China Sea and southern Yellow Sea areas in the late MIS 3. The marine transgression strata from the borehole core data was identified at ca. 30 m below present sea level as a result of the collective influence of ice melting water, neotectonic subsidence, sediment compaction and terrestrial sediment filling since ca. 35 ka ago,whereas the simulated relative sea-levels turned out to be –26.3––29.9 m a.s.l. The small error involved in the simulation results of ±(2.5–4.5) m demonstrated the credibility of the results. Our results indicated that sea level change in the late MIS 3 was dominated by glacial effects, in which the eustatic sea-level was between –19.2––22.1m a.s.l. The study sheds light on the nature of sea-level changes along the east coast of China in the late MIS 3 and contributes to understanding the characteristics of marine transgression under the effects of multiple complex land-sea interactions. 展开更多
关键词 marine transgression late MIS 3 dynamic simulation sea level change
下载PDF
DYNAMIC SIMULATION OF FLUID-STRUCTURE INTERACTION PROBLEMS INVOLVING LARGE-AMPLITUDE SLOSHING 被引量:2
17
作者 ChenJianping ZhouRurong WuWenlong 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2004年第1期117-120,共4页
An effective computational method is developed for dynamic analysis offluid-structure interaction problems involving large-amplitude sloshing of the fluid andlarge-displacement motion of the structure. The structure i... An effective computational method is developed for dynamic analysis offluid-structure interaction problems involving large-amplitude sloshing of the fluid andlarge-displacement motion of the structure. The structure is modeled as a rigid container supportedby a system consisting of springs and dashpots. The motion of the fluid is decomposed into twoparts: the large-displacement motion with the container and the large-amplitude sloshing relative tothe container. The former is conveniently dealt with by defining a container-fixed noninertiallocal frame, while the latter is easily handled by adopting an ALE kinematical description. Thisleads to an easy and accurate treatment of both the fluid-structure interface and the fluid freesurface without producing excessive distortion of the computational mesh. The coupling between thefluid and the structure is accomplished through the coupling matrices that can be easilyestablished. Two numerical examples, including a TLD-structure system and a simplified liquid-loadedvehicle system, are presented to demonstrate the effectiveness and reliability of the proposedmethod. The present work can also be applied to simulate fluid-structure problems incorporatingmultibody systems and several fluid domains. 展开更多
关键词 Fluid-structure interaction Large-amplitude sloshing dynamic simulation Arbitrary Lagrangian-Eulerian (ALE) description
下载PDF
Dynamic simulation on rubber spring supporting equipment of vibrating screen 被引量:3
18
作者 SU Rong-hua PENG Chen-yu 《Journal of Coal Science & Engineering(China)》 2011年第2期187-191,共5页
By ANSYS, dynamic simulation analysis of rubber spring supporting equipment used in vibrating screen was made. The modal frequency, mode, and harmonic displacement under working frequency were obtained. Variation of r... By ANSYS, dynamic simulation analysis of rubber spring supporting equipment used in vibrating screen was made. The modal frequency, mode, and harmonic displacement under working frequency were obtained. Variation of rubber spring supporting equipment's dynamic performance was discussed first, which is under the condition of existing spring stiffness difference and exciting force bias. Also, the quantitative calculation formulas were given. The results indicate that the performance of vibrating screen is closely related with rubber spring supporting equipment's dynamic performance. Differences of springs' stiffness coefficients reduce the modal frequency reduced, decrease the dynamic stiffness, and increase vibration displacement. Exciting force bias induces a larger lateral displacement. When rubber springs' stiffness coefficients exist, differences and lateral force accounts for 5% in total exciting force; rubber spring supporting equipment's side swing is larger than 1 mm, exceeding the side swing limit. 展开更多
关键词 vibrating screen rubber spring dynamic simulation analysis harmonic response
下载PDF
Behavioural analysis and dynamic simulation of the debris flow that occurred in Ganluo County(Sichuan, China) on 30 August 2020 被引量:1
19
作者 LI Nuo-dong LIU Wei ZHAO Jin-heng 《Journal of Mountain Science》 SCIE CSCD 2022年第6期1495-1508,共14页
On August 30, 2020, a high-intensity storm that dropped 45.4 mm of rain in 5 hours hit the Heixiluo basin and triggered a landslide-generated debris flow event, causing fatalities and damage. The original source of th... On August 30, 2020, a high-intensity storm that dropped 45.4 mm of rain in 5 hours hit the Heixiluo basin and triggered a landslide-generated debris flow event, causing fatalities and damage. The original source of the debris flow was a large slope collapse on a steep hillside. The fallen debris mass was enlarged through sediment entrainment and slope collapse and ultimately buried a bridge at the gully entrance. Approximately 6.9×10;m;of material, including sediments and collapsed slope deposits in the gullies, was entrained, and the maximum erosion depth reached 17 m. A geomorphological analysis was initially performed based on a detailed field investigation to recognize the liquid and solid sources of the debris flow and the areas subjected to deposition and erosion. A map of the erosiondeposition distribution was obtained based on preand post-event DEMs. Using the rainfall estimated by the nearest rain gauge and the solid source estimated by the DEMs, runoff and debris flow propagation was simulated using a liquid-solid two-phase model that considers the effects of runoff and entrainment. The similarity between the estimated and simulated deposition-erosion volumes was satisfactory. The behaviour of debris flows captured in the simulation is broadly in line with the main features of the observed event. 展开更多
关键词 Debris flow Formation analysis Two-phase model dynamic simulation
下载PDF
DYNAMIC SIMULATION OF ROTATING SHELLS COUPLED WITH LIQUID 被引量:1
20
作者 Wei Fayuan Li Shiqi Huang Yuying~1 Zhong Yifang (College of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China) (1 Department of Mechanics, Huazhong University of Science and Technology, Wuhan 430074,China) 《Acta Mechanica Solida Sinica》 SCIE EI 2001年第2期169-175,共7页
The dynamic behaviors of rotating shells coupled with liquid areshown. The shell under con- sideration has arbitrary boundaryconditions and a complex shape. A modified boundary element methodand finite strip technique... The dynamic behaviors of rotating shells coupled with liquid areshown. The shell under con- sideration has arbitrary boundaryconditions and a complex shape. A modified boundary element methodand finite strip technique are used to improve the computingefficiency and to guarantee the continuity conditions on theliquid-shell interaction plane. The effects of various parameterssuch as shell's thickness and liquid depth are investigated. Dynamicsimulations are applied to several typical shell-liquid systems, andthe natu- ral frequencies, mode shapes and response of vibration arecalculated numerically. 展开更多
关键词 rotting shells dynamic simulation fluid-solid interaction
下载PDF
上一页 1 2 50 下一页 到第
使用帮助 返回顶部