Earthquake safety assessment of concrete arch and gravity dams

Based on research studies currently being carried out at Dalian University of Technology, some important aspects for the earthquake safety assessmcnt of concrete dams are reviewed and discussed. First, the rate-dependent behavior of concrcte subjected to earthquake loading is examined, emphasizing the properties of concrete under cyclic and biaxial loading conditions. Second, a modified four-parameter Hsieh-Ting-Chen viscoplastic consistency model is developed to simulate the rate-dependent behavior of concrete. The earthquake response of a 278m high arch dam is analyzed, and the results show that the strain-rate effects become noticeable in the inelastic range, Third, a more accurate non-smooth Newton algorithm for the solution of three-dimensional frictional contact problems is developed to study the joint opening effects of arch dams during strong earthquakes. Such effects on two nearly 300m high arch dams have been studied. It was found that the canyon shape has great influence on the magnitude and distribution of the joint opening along the dam axis. Fourth, the scaled boundary finite element method presented by Song and Wolf is employed to study the dam-reservoir-foundation interaction effects of concrete dams. Particular emphases were placed on the variation of foundation stiffness and the anisotropic behavior of the foundation material on the dynamic response of concrete dams. Finally, nonlinear modeling of concrete to study the damage evolution of concrete dams during strong earthquakes is discussed. An elastic-damage mechanics approach for damage prediction of concrete gravity dams is described as an example. These findings are helpful in understanding the dynamic behavior of concrete dams and promoting the improvement of seismic safety assessment methods.

Safety Aspects of Sustainable Storage Dams and Earthquake Safety of Existing Dams

The basic element in any sustainable dam project is safety, which includes the following safety elements： O structural safety, dam safety monitoring, operational safety and maintenance, and emergency planning. Long-term safety primarily includes the analysis of all hazards affecting the project; that is, hazards from the natural environment, hazards from the man-made environment, and project-specific and site-specific hazards. The special features of the seismic safety of dams are discussed. Large dams were the first structures to be systematically designed against earthquakes, starting in the 1930s. How- ever, the seismic safety of older dams is unknown, as most were designed using seismic design criteria and methods of dynamic analysis that are considered obsolete today. Therefore, we need to reevaluate the seismic safety of existing dams based on current state-of-the-art practices and rehabilitate deficient dams. For large dams, a site-specific seismic hazard analysis is usually recommended. Today, large dams and the safety-relevant elements used for controlling the reservoir after a strong earthquake must be able to withstand the ground motions of a safety evaluation earthquake. The ground motion parameters can be determined either by a probabilistic or a deterministic seismic hazard analysis. During strong earthquakes, inelastic deformations may occur in a dam; therefore, the seismic analysis has to be car- ried out in the time domain. Furthermore, earthquakes create multiple seismic hazards for dams such as ground shaking, fault movements, mass movements, and others. The ground motions needed by the dam engineer are not real earthquake ground motions but models of the ground motion, which allow the safe design of dams. It must also be kept in mind that darn safety evaluations must be carried out several times during the long life of large storage dams. These features are discussed in this paper.

The influence of earthquakes on Zhubi Reef in the Nansha Islands of the South China Sea

It is exceedingly important to estimate the stability of coral reefs. In recent years, growing construction projects have been carried out on the reef flat in the South China Sea. As a special marine geotechnical medium, it is made of the reef debris underwent overwhelmingly long geological age. Reefs grow thickly on the carbonate platform after the Late Oligocene and have five to six main sedimentary facies. It can be used as a recorder to measure the occurrence time of recent earthquake. A model of reef body is presented to study the influence of earthquakes according to the geological structure characteristic of reefs in the Nansha Islands. Furthermore, Geo Studio is used to simulate stress and deformation situations within it under various earthquake intensities. A safety factor is calculated by the limit equilibrium method, and the possible scenarios of earthquake-induced landslides and sliding scale are defined with a Newmark sliding block method, as well as stress distribution and deformation behaviors. Therefore, the numerical results suggest that the connections between the coral reef and the earthquake are as follows：（1） the reef body has a good stability under self-gravity state;（2） after the earthquake, it may cause slope＇s instability and bring out slumping when the safety factor is smaller than 1（FS〈1）;（3） the safety factor decreases with the increasing earthquake intensity, and fluctuates around a particular value after a while;and（4） as a new developed part of the reef, the smaller shallow landslide will be easily subject to collapse caused by the earthquake. It is concluded that it is feasible to provide a reference for evaluating the stability of coral reef using a geotechnical engineering simulation method. This can help the engineering constructions in the South China Sea.