Secondary Activation of Commercial Activated Carbon and its Application in Electric Double Layer Capacitor

The cheap commercial activated carbon (AC) was improved through the secondary activation under steam in the presence of FeCl2 catalyst in the temperature range of 800-950℃ and its application in electric double layer capacitors (EDLCs) with organic electrolyte was studied. The re-activation of AC results in the increases in both specific capacitance and high rate capability of EDLCs. For AC treated under optimized conditions, its discharge specific capacitance increases up to 55.65 F/g, an increase of about 33% as compared to the original AC, and the high rate capability was increased significantly. The good performances of EDLC with improved AC were correlated to the increasing mesoporous ratio.

NiCo_(2)O_(4)@quinone-rich N-C core-shell nanowires as composite electrode for electric double layer capacitor

The bind-free carbon cloth-supported electrodes hold the promises for high-performance electrochemical capacitors with high specific capacitance and good cyclic stability.Considering the close connection between their performance and the amount of carbon material loaded on the electrodes,in this work,NiCo_(2)O_(4) nanowires were firstly grown on the substrate of active carbon cloth to provide the necessary surface area in the longitudinal direction.Then,the quinone-rich nitrogen-doped carbon shell structure was formed around NiCo_(2)O_(4) nanowires,and the obtained composite was used as electrode for electric double layer capacitor.The results showed that the composite electrode displayed an area-specific capacitance of 1794 mF·cm^(-2) at the current density of 1 mA·cm^(-2).The assembled symmetric electric double layer capacitor achieved a high energy density of 6.55 mW·h·cm^(-3) at a power density of 180 mW·cm^(-3).The assembled symmetric capacitor exhibited a capacitance retention of 88.96%after 10000 charge/discharge cycles at the current density of 20 mA·cm^(-2).These results indicated the potentials in the preparation of the carbon electrode materials with high energy density and good cycling stability.

Structure and Electrochemical Performance of Hollow Tube Activated Carbon Prepared from Cotton as Electrode Material for Electric Double Layer Capacitor

Hollow tube-like activated carbon（HTAC） was fabricated by a simple and efficient carbonization method with cotton as carbon precursor activated by KOH without any template. The activation time from 0 to 90 min showed no significant effect on the micro-morphology, but greatly influenced the specific surface area and electro- chemical performance. In the end, it was found that the sample activated for 60 min（HTAC-60） has a higher specific surface area of 2600 m2/g, a larger pore volume of 1.52 cm3/g and a greater specific capacitance of 483 F/g at a current density of 0.2 A/g in 1 mol/L H2SO4. Moreover, the sample HTAC-60 shows excellent cycle stability（only 12.2% loss after 5000 cycles） and a high energy density of 67.1 or 37.2 W-h.kg-1 at a power density of 200 or 1000 W/kg, respectively, operated in a voltage range of 0--1.0 V in 1 mol/L H2SO4. The results indicate that cotton can potentially be used as a raw material for producing low cost and high performance activated carbon electrode materials for electric double layer capacitor.

Characterization of Microporous Activated Carbon Electrodes for Electric Double-layer Capacitors

Activated carbons(ACs) with a wide range of surface areas were made from petroleum coke by means of KOH activation. The electrochemical characterization was carried out for several activated carbons used as polarizable electrodes of electric double-layer capacitors(EDLCs) in an aqueous electrolytic solution. The porous structures and electrochemical double-layer capacitance of the activated carbons were investigated by virtue of nitrogen gas adsorption and constant current cycling(CCC) methods. The relationship among the surface area, pore volume of the activated carbons and specific double-layer capacitance was discussed. It was found that the specific capacitance of ACs increased linearly with the increase of surface area. The presence of mesopores in the activated carbons with very high surface area(>2000 m\+2/g) was not very effective for them to be used as EDLCs. The influence of chemical characteristics of the activated carbons on the double layer formation could be considered to be negligible.

High Power Density Electric Double Layer Capacitor with Improved Activated Carbon

The improvement on commercial activated carbon (AC) through the reactivation under steam in the presence of NiCh(2) catalyst leads to the increases of both energy mid power densities of electric double layer (dl) capacitors. When AC was treated at 875 V for 1 h, its discharge specific Capacitance increases up to 53.67 F (.) g(-1), an increase of about 25% compared to the as-received AC. Moreover, a significaut increase in high rate capability of electric dl Capacitor was found after the improvements. Surprisingly, both the treated and untreated AC samples showed similar specific surface area and pore size distribution, but some changes in the surface groups and thew concentrations after reactivation were verified by X-photoelectron spectra. Thus, it is reasonable to conclude that the decrease in the surface concentration of the carbonyl-containing species for the improved AC results in an increase of accessibility of the pores to the organic electrolyte ion, causing the enhancements of both the specific capacitance and high rate capability.

Hierarchically porous carbon foams for electric double layer capacitors

The growing demand for portable electronic devices means that lightweight power sources are increasingly sought after. Electric double layer capacitors （EDLCs） are promising candidates for use in lightweight power sources due to their high power densities and outstanding charge/discharge cycling stabilities. Three-dimensional （3D） self-supporting carbon-based materials have been extensively studied for use in lightweight EDLCs. Yet, a major challenge for 3D carbon electrodes is the limited ion diffusion rate in their internal spaces. To address this limitation, hierarchically porous 3D structures that provide additional channels for internal ion diffusion have been proposed. Herein, we report a new chemical method for the synthesis of an ultralight （9.92 mg/cm3） 3D porous carbon foam （PCF） involving carbonization of a glutaraldehyde- cross-linked chitosan aerogel in the presence of potassium carbonate. Electron microscopy images reveal that the carbon foam is an interconnected network of carbon sheets containing uniformly dispersed macropores. In addition, Brunauer-Emmett-Teller measurements confirm the hierarchically porous structure. Electrochemical data show that the PCF electrode can achieve an outstanding gravimetric capacitance of 246.5 F/g at a current density of 0.5 A/g, and a remarkable capacity retention of 67.5% was observed when the current density was increased from 0.5 to 100A/g. A quasi-solid-state symmetric supercapacitor was fabricated via assembly of two pieces of the new PCF and was found to deliver an ultra-high power density of 25 kW/kg at an energy density of 2.8 Wh/kg. This study demonstrates the synthesis of an ultralight and hierarchically porous carbon foam with high capacitive performance.

Electrical Characteristics of Super Capacitors Using KOH Gel

Despite aqueous electrolytes having a low cost and excellent ionic conductivity,their low withstand voltage of 1.2 V makes them problematic for battery utility because that is a very important factor in battery production.In this research,the possibility of increasing the withstand voltage while maintaining the low cost of aqueous electrolytes was investigated.In this research,the solution electrolyte was made into a viscous solid polymer electrolyte to improve the withstand voltage of the electrolyte.A solid polymer electrolyte was made from sodium polyacrylate and doped with KOH(potassium hydroxide)and pure water.The improvement of the withstand voltage was evaluated by the specific capacitance.

A survey of hybrid energy devices based on supercapacitors

Developing multifunctional energy storage systems with high specific energy, high specific power and long cycling life has been the one of the most important research directions. Compared to batteries and traditional capacitors, supercapacitors possess more balanced performance with both high specific power and long cycle-life. Nevertheless, regular supercapacitors can only achieve energy storage without harvesting energy and the energy density is still not very high compared to batteries. Therefore, combining high specific energy and high specific power,long cycle-life and even fast self-charging into one cell has been a promising direction for future energy storage devices. The multifunctional hybrid supercapacitors like asymmetric supercapacitors, batteries/supercapacitors hybrid devices and self-charging hybrid supercapacitors have been widely studied recently. Carbon based electrodes are common materials used in all kinds of energy storage devices due to their fabulous electrical and mechanical properties. In this survey, the research progress of all kinds of hybrid supercapacitors using multiple effects and their working mechanisms are briefly reviewed. And their advantages and disadvantages are discussed. The hybrid supercapacitors have great application potential for portable electronics, wearable devices and implantable devices in the future.

The key challenges and future opportunities of electrochemical capacitors

Electrochemical capacitors(ECs)with unique merits of fast charge/discharge rate and long cyclability are one of the representative electrochemical energy storage systems,possessing wide applications in power electronics and automotive transportation,etc.[1,2].Furthermore.

A perspective on graphene for supercapacitors: Current status and future challenges

Supercapacitors,also known as ultracapacitors or electrochemical capacitors,possess intriguing merits of high power density(10-100 times higher than that of batteries),long life expectancy(millions of cycles),wide operation temperature range (-40℃ to 70℃),environmental friendliness.

Advances in in-situ characterizations of electrode materials for better supercapacitors

In past decades,the performance of supercapacitors has been greatly improved by rationalizing the electrode materials at the nanoscale.However,there is still a lack of understanding on how the charges are efficiently stored in the electrodes or transported across the electrolyte/electrode interface.As it is very challenging to investigate the ion-involved physical and chemical processes with single experiment or computation,combining advanced analytic techniques with electrochemical measurements,i.e.,developing in-situ characterizations,have shown considerable prospect for the better understanding of behaviors of ions in electrodes for supercapacitors.Herein,we briefly review several typical in-situ techniques and the mechanisms these techniques reveal in charge storage mechanisms specifically in supercapacitors.Possible strategies for designing better electrode materials are also discussed.

EDLC charging performance for microgrid applications

In order to review storage performance of the electric double layer capacitor （EDLC） in microgrid applications, charging time and storage efficiency issues are mainly studied aiming at three different charging modes, including the constant voltage charging mode （CVCM）, the constant current charging mode （CCCM） and the constant power charging mode （CPCM）, based on the practical EDLC product. Numerical calculation methods are presented for different charging modes, and the charging efficiency is also reviewed with strict mathematical deductions, which is validated to be accurate enough and applicable through a simple case with the PV/EDLC system illustration. Finally, trade-off problems between charging time and energy loss are also studied. Research results show that the CPCM is more suitable for microgrid networks compared with the traditional constant-voltage and constant-current charging modes. The hybrid charging method is recommended to save energy and keep high efficiency relatively at the same time. However, how to manage the combination percentage of different charging modes in a reasonable way should be dealt with according to the practical requirements.

Preparation and electrochemical characterization of activated carbons by chemical-physical activation

A process was proposed based on the combination of chemical and physical activation for the production of activated carbons used as the electrode material for electric double layer capacitor (EDLC). By material characterization and electrochemical methods, the influences of the activitation process on the specific surface area, pore structure and electrochemical properties of the activated carbons were investigated. The results show that specific surface area, the mesopore volume, and the specific capacitance increase with the increase of the mass ratio of KOH to char (m(KOH)/m(char)) and the activation time, respectively. When m(KOH)/m(char) is 4.0, the specific surface area and the mesopore volume reach the maximum values, i.e. 1 960 m2/g and 0.308 4 cm3/g, and the specific capacitance is 120.7 F/g synchronously. Compared with the chemical activation, the activated carbons prepared by chemical-physical activation show a larger mesopore volume, a higher ratio of mesopore and a larger specific capacitance.

Enhanced Capacitive Characteristics of Activated Carbon by Secondary Activation

The effect of the improvement of commercial activated carbon(AC) on its specific capacitance and high rate capability of double layer(dl) charging/discharging process has been studied. The improvement of AC was carried out \%via\% a secondary activation under steam in the presence of catalyst NiCl\-2, and the suitable condition was found to be a heat treatment at about 875 ℃ for 1 h. Under those conditions, the discharge specific capacitance of the improved AC increases up to 53.67 F/g, showing an increase of about 25% as compared with that of as-received AC. The good rectangular-shaped voltammograms and A.C. impedance spectra prove that the high rate capability of the capacitor made of the improved AC is enhanced significantly. The capacitance resistance(RC) time constant of the capacitor containing the improved AC is 1\^74 s, which is much lower than that of the one containing as-received AC(an RC value of 4.73 s). It is noted that both kinds of AC samples show a similar specific surface area and pore size distribution, but some changes have taken place in the carbon surface groups, especially a decrease in the concentration of surface carbonyl groups after the improvement, which have been verified by means of X-photoelectron spectroscopy. Accordingly, it is suggested that the decrease in the concentration of surface carbonyl groups for the improved AC is beneficial to the organic electrolyte ion penetrating into the pores, thus leading to the increase in both the specific capacitance and high rate capability of the supercapacitor.

Effect of ball-milling technology on pore structure and electrochemical properties of activated carbon

The effects of particle size of activated carbon （AC） on its wettability, electrode coating technology and electric chemical performance were studied to assemble nonaqueous electric double layer capacitors （EDLCs） for high power requirements. The results show that the specific surface area and total pore volume of AC decrease from 2 137 m^2/g to 1 683 m^2/g, and 0.95 cm^3/g to 0.78 cm^3/g, respectively, if it is ball-milled for 8 h. The pore size distributions are similar in the range of 0.7 nm to 3.5 nm for different ball-milling time. There exists oxidation on the surface of AC during the ball-milling process and the ratios of O-C=O oxygen compositions increase whereas those of C-O, C=O decrease. The peeling strength of AC coated on current collector is almost inverse proportion with the particle size of AC as well as the resistance of EDLCs, and its capacitance decreases about 6%.