Drilling-based measuring method for the c-φ parameter of rock and its field application

The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.

Screening and field application of microbial-flooding activator systems

This study aims to further enhance the oil recovery of reservoirs in the Zhong-2 Block of the Gudao Oilfield by identifying the most effective microbial-flooding activator systems and applying them in the field.We began by analyzing the structure of the reservoirs'endogenous microbial communities to understand the potential impact of microbial flooding.This was followed by determining commonly used activator systems based on their abilities to stimulate oil-displacement functional bacteria.Through laboratory experiments on oil displacement efficiency and sweep characteristics,we determined the optimal activator injection method(injection ratio)and the requisite bacterial concentration for maximal microbial-flooding efficacy.Finally,we selected the optimal activator systems and applied them to field tests.Our findings suggest the target block is highly receptive to microbial-flooding.In terms of performance,the activator systems ranked as No.3>No.4>No.1>No.2.Interestingly,a deep activator system,when compared to the top-performing No.3 system,exhibited a higher bacterial concentration peak and longer peaking duration.Optimal oil displacement effects were observed at a 1:4 vol ratio between the No.3 activator and deep activator systems,with bacterial concentrations of up to 106 cells/mL or above.Field tests with the selected activator systems,following a specific injection protocol,demonstrated a notable increase in oil production and a reduction in water cut.

Preparation and Field Application of a Novel Micro-emulsion as Heavy Oil Displacement Agent

A novel micro-emulsion was prepared by mixing an oil-soluble viscosity reducer,which was screened to aim at improving the heavy oil properties of Shengli oilfield with water-soluble surfactant and co-surfactant.The static viscosity reduction and oil washing performance of the micro-emulsion were investigated,and the field application of the microemulsion used as heavy oil displacement agent was also reported.Results showed that the micro-emulsion exhibited excellent viscosity reduction performance for the studied heavy oil samples.When heavy oil was mixed with 0.5%of the micro-emulsion,a stable oil-in-water heavy oil emulsion could be formed.After the content of the micro-emulsion was increased to 3.0%,the oil removing rate reached up to 80%.Field application of the micro-emulsion to the Pai-601-Ping-115 well and the Pai-601-Ping-123 well was shown to be effective by increasing the periodic oil production up to 203 tons.

Progress in the extraction and application of collagen peptides

Collagen peptide is the product of complete hydrolysis of collagen,which has a relatively small molecular weight and is more easily absorbed than proteins and amino acids.Collagen peptide not only has unique nutritional value,but also has certain physiological functions,which makes it has great potential value in various fields,so it has set off a wave of research on collagen peptide in the biological world.This paper describes the sources and extraction methods of collagen peptides,and describes the research progress and application of collagen peptides in the medical,food,material and skin care industries according to their physiological functions,which will provide new ideas for the future research of collagen peptides.

Research on compound plugging removal technology and its application in Xinmu oilfield of Jilin

Most fault-block reservoirs in Xinmu oilfield belong to heterogeneous sandstone in characters which has low permeability, and reservoir pollution is a common phenomenon in this area. Acidizing deplugging in oil wells has become one of the major measures to improve production efficiency in the field. A compound deplug- ging technology in high efficiency low corrosion is developed for this kind of low permeability sandstone reser- voir. On the basis of profoundly understanding of the reservoir＇s physical properties and sensitivity, along with comprehensive analysis of the cause for jams in oil wells, a series of experiments are carried out in order to in- vestigate the dissolution reaction among samples and deplugging inhibitor, sample dissolving speed, formation fluid compatibility, reduction of secondary pollution, etc. Considered reservoir condition in nearby wells the op- timized compositional deplugging liquid formula is selected for this reservoir. It is featured by reducing the de- plugging reaction speed, extending solution for processing radius, preventing secondary damage in dissolution processing, and removing plug pollution effectively. To implement this high efficiency low corrosion deplugging measure based on reservoir condition in the borehole and nearby wells, a relatively better result of deplugging and production increasing is achieved, which enriches the measures to increase production in Xinmu oilfield, and this method can be applied to other similar oiffields for the purpose of maintaining the crude oil production and providing assistant for increasing the production significantly.

Application of Nanotechnology in Soil Stabilization

Nano-technology is expanding its horizon in various science and technology fields.In civil engineering,soil is a complex material and used for various functions and applications.Meanwhile,sometimes an effective soil stabilization technique is needed to fulfil the site criteria and can be achieved by adopting various methods e.g.,physical,chemical,thermal or reinforcement using geotextiles and fabrics.The mechanism of soil stabilization using nanomaterials is still unexplored and open to prospective researchers.The present article attempts to touch and explore the possibilities of nano-technology in soil improvement and its applications in various civil engineering works.Microstructural analysis of the nanomaterials treated soils using the latest equipment has also been discussed.The study interprets that the use of nano materials is still limited,due to their high cost and sophisticated handling procedures.Though the use of nanoparticles in soil stabilization results in extraordinary improvements in various soil properties,the improved soil properties could be utilized for various geotechnical projects.The present study bridges the past findings to the present scenario of nanomaterials in soil improvement.

New Method for 3D Transient Eddy Current Field Calculation and Its Application in Magneto-Acoustic Tomography

A new method of 3D transient eddy current field calculation is proposed. The Maxwell equations with time component elimination （METCE） are derived under the assumption of magnetic quasi static approximation, especially for the sample of low conductivity. Based on METCE, we deduce a more efficient reconstruction algorithm of a 3D transient eddy current field. The computational burden is greatly reduced through the new algorithm, and the computational efficiency is improved. This new algorithm decompounds the space-time variables into two individual variables. The idea is to solve the spatial vector component firstly, and then multiply it by the corresponded time component. The iterative methods based on METCE are introduced to recover the distribution of conductivity in magneto-acoustic tomography. The reconstructed images of conductivity are consistent with the original distribution, which validate the new method.

A three-dimentional model of the northeast East China Sea, with application to the M2 current field

A simple three-dimensional tidal model is used to examine the M2 tidal current distribution in a northeastern part of the East China Sea, especially the vertical variation of the current in the region. Computed M2 current is compared with observations available and found to be in good agreement.Main features of the calculating method in this study are: (1) Vertical variation of the tidal current is taken as a funetion of the depth-mean velocity: (2) the method is applicable to a variety of the vertical eddy viscosities; (3) it has a fine vertical resolution, especially near the sea bootom. So, this method not only enables us to get a steady state solution easily but also depicts effects of the friction on the vertical variation of the current much better.

Application of Low Pressure Plasma Technology in the Field of Environmental Protection

The characteristics of low pressure plasma produced by a gas discharges lie in thatthe energy of the electrons are much higher than that of the heavy particles in the system. Inthis paperl the low-pressure plasma treatment technology for the environmental contaminantswas synthetically studied, and the reaction processing and mechanism between the low-pressureplasma and the environmental contaminants were theoretically analyzed. At last, the prospectsand existing problems on the application of low-pressure plasma in the field of environmentalprotection were discussed.

Dynamic mechanical characteristics and application of constant resistance energy-absorbing supporting material

In deep underground engineering,rock burst and other dynamic disasters are prone to occur due to stress concentration and energy accumulation in surrounding rock.The control of dynamic disasters requires bolts and cables with high strength,high elongation,and high energy-absorbing capacity.Therefore,a constant resistance energy-absorbing(CREA)material is developed.In this study,the dynamic characteristics of the new material are obtained via the drop hammer tests and the Split Hopkinson Pressure Bar(SHPB)tests of the new material and two common bolt(CB)materials widely used in the field.The test results of drop hammer test and SHPB test show that the percentage elongation of CREA material is more than 2.64 and 3.22 times those of the CB material,and the total impact energy acting on CREA material is more than 18.50 and 21.84 times,respectively,indicating that the new material has high elongation and high energy-absorbing capacity.Subsequently,the CREA bolts and cables using the new material are developed,which are applied in roadways with high stress and strong dynamic disturbance.The field monitoring results show that CREA bolts and cables can effectively control the surrounding rock deformation and ensure engineering safety.

Mechanical behaviour analysis and support system field experiment of confined concrete arches

Soft rock control is a big challenge in underground engineering.As for this problem,a high-strength support technique of confined concrete(CC)arches is proposed and studied in this paper.Based on full-scale mechanical test system of arch,research is made on the failure mechanism and mechanical properties of CC arch.Then,a mechanical calculation model of circular section is established for the arches with arbitrary section and unequal rigidity;a calculation formula is deduced for the internal force of the arch;an analysis is made on the influence of different factors on the internal force of the arch;and a calculation formula is got for the bearing capacity of CC arch through the strength criterion of bearing capacity.With numerical calculation and laboratory experiment,the ultimate bearing capacity and internal force distribution is analyzed for CC arches.The research results show that:1)CC arch is 2.31 times higher in strength than the U-shaped steel arch and has better stability;2)The key damage position of the arch is the two sides;3)Theoretical analysis,numerical calculation and laboratory experiment have good consistency in the internal force distribution,bearing capacity,and deformation and failure modes of the arch.All of that verifies the correctness of the theoretical calculation.Based on the above results,a field experiment is carried out in Liangjia Mine.Compared with the U-shaped steel arch support,CC arch support is more effective in surrounding rock deformation control.The research results can provide a basis for the design of CC arch support in underground engineering.

Coal Seam Permeability Improvement and CBM Production Enhancement by Enlarged Borehole: Mechanism and Application

The permeability is a key factor to determine the efficiency of coalbed methane(CBM)production.The borehole enlargement technology using hydraulic and mechanical measures to cut coal is an effective method to increase the coal seam permeability and improve the efficiency of gas drainage.Reasonable design of the layout of boreholes is the prerequisite for efficient and economical gas drainage.In this paper,based on the strain-softening model,the stress and permeability model of the coal seam around the enlarged borehole was built,and based on the dual-medium model,the gas migration model in the coal seam was established.Then the borehole enlargement gas drainage engineering of E9/10 coal seam in Pingdingshan No.8 coal mine was simulated by using COMSOL Multiphysics software.The distribution of stress and permeability in the coal seam around a borehole was analyzed,and the reasonable borehole radius of 0.25 m and reasonable borehole spacing of 6 m were determined.Finally,in Pingdingshan No.8 coal mine,field application was carried out in E9/10 coal seam-21070 working face from the high-level gas drainage roadway.The results show that the actual average coal slag discharge rate is 77.82%,which achieved borehole enlargement.The natural gas flow rate from an enlarged borehole is 2.3–7.3 times that of a normal borehole,and the influence range of enlarged boreholes is more than 6 m.The average gas drainage concentration of a group of enlarged boreholes is about 42%,and the average gas drainage amount is about 0.53 m3/min.After two months of gas extraction,the outburst risk in this area was eliminated,which provides a guarantee for safe coal mining.

Stationary Flow of Blood in a Rigid Vessel in the Presence of an External Magnetic Field: Considerations about the Forces and Wall Shear Stresses

The magnetohydrodynamics laws govern the motion of a conducting fluid, such as blood, in an externally applied static magnetic field B0. When an artery is exposed to a magnetic field, the blood charged particles are deviated by the Lorentz force thus inducing electrical currents and voltages along the vessel walls and in the neighboring tissues. Such a situation may occur in several biomedical applications: magnetic resonance imaging (MRI), magnetic drug transport and targeting, tissue engineering… In this paper, we consider the steady unidirectional blood flow in a straight circular rigid vessel with non-conducting walls, in the presence of an exterior static magnetic field. The exact solution of Gold (1962) (with the induced fields not neglected) is revisited. It is shown that the integration over a cross section of the vessel of the longitudinal projection of the Lorentz force is zero, and that this result is related to the existence of current return paths, whose contributions compensate each other over the section. It is also demonstrated that the classical definition of the shear stresses cannot apply in this situation of magnetohydrodynamic flow, because, due to the existence of the Lorentz force, the axisymmetry is broken.

Research and Application of New Methods to Oil-Gas Geochemical Exploration

Based on the results of researches and applications for many years, it has been discovered that new methods and techniques for geochemical exploration of oil and gas such as δC, altered carbonate, Hg in absorption phase, Ks, Fe2+, δ13C, fluorescence in two and three dimensions, and N2 and O2 in heat release can give full play in the following five fields: (1) optimization of the favourable target or hollow zones and structural zones in a region; (2) evaluation of oil traps and delineation of prospective oil and gas areas; (3) prediction of deep-seated oil-bearing horizons; (4) evaluation of the genesis of oil and gas geochemical anomalies and determination of the types of oil and gas accumulations; (5) forecast of the burial depths of oil and gas pools.

Laboratory and field evaluation of a low-cost optical particle sizer

Low-cost sensors are widely used to collect high-spatial-resolution particulate matter data that traditional reference monitoring devices cannot.In addition to the mass concentration,the number concentration and size distribution are also fundamental in determining the origin and hazard level of particulate pollution.Therefore,low-cost optical sensors have been improved to establish optical particle sizers(OPSs).In this study,a low-cost OPS,the Nova SDS029,is introduced,and it is evaluated in comparison to two reference instruments—the GRIMM 11-D and the TSI 3330.We first tested the sizing accuracy using polystyrene latex spheres.Then,we assessed the mass and number size distribution accuracy in three application scenarios:indoor smoking,ambient air quality,and mobile monitoring.The evaluations suggest that the low-cost SDS029 rivals research-grade optical sizers in many aspects.For example,(1)the particle diameters obtained with the SDS029 are close to the reference instruments(usually<10%)in the 0.3-5μm range;(2)the number of particles and mass concentration are highly correlated(r≥0.99)with the values obtained with the reference instruments;and(3)the SDS029 slightly underestimates the number concentration,but the derived PM_(2.5)values are closer to monitoring station than the reference instruments.The successful application of the SDS029 in multiple scenarios suggests that a plausible particle size distribution can be obtained in an easy and cost-efficient way.We believe that low-cost OPSs will increasingly be used to map the sources and risk levels of particles at the city scale.

Review on the state-of-the-art and challenges in the MgB_(2)component manufacturing for superconducting applications

Since the discovery of MgB_(2)as a superconductor,several research groups worldwide have studied the superconducting mechanisms due to the dual gap nature of MgB_(2),as well as attempted to produce such a compound in wires,tapes,bulks,and thin films for a plethora of applications.While MgB_(2)carries the promise of replacing Niobium‐based superconductors in low‐field applications,less‐than‐desirable performance and in‐operation stability has slowed down such a progress.While the properties and nature of the superconductivity of MgB_(2)are fairly known,the reproduction of its properties at manufacturing scales remains an unsolved problem.Therefore,this manuscript presents a systematic review on fundamental properties,phase formation,growth kinetics,and superconducting properties of MgB_(2)‐based components such as multi‐and mono‐core wires,bulks,and thin films.Advances,challenges,and shortcomings are utilized in consolidating research questions and directions pertaining to the manufacturing of MgB_(2)superconducting devices.Lastly,we evaluate the technological readiness of MgB_(2)‐based devices for applications in fusion energy systems.

Prospects of microwave-induced thermoacoustic imaging

Microwave-induced thermoacoustic imaging(MTAI)has advantages including the large imaging depth,high imaging resolution,high imaging contrast,and fast imaging speed.The thermoacoustic(TA)group of South China Normal University has dedicated to developing TA imaging for more than a decade and has made many breakthroughs.This review introduces these breakthroughs from two aspects including the improvement in techniques and the exploration of applications.On the technological level,there are ultrashort microwave pulse(USMP)-inducedTA imaging that can improve the imaging resolution,nonlinear thermoacoustic imaging(NTAI)that can improve the imaging contrast,polarized microwave-inducedthermoacoustic imaging(P-MTAI)that can obtain cellular-level alignment information,and more convenient and accurate handheld and multimodal probes.On the application side,the optimization and expansion have been carried out,mainly concentrating on breast and myocardial imaging.Finally,several current research directions are introduced,including the application of P-MTAI on joint imaging and research on whole-body imaging of small animals.

Evaluation of soil flame disinfestation(SFD) for controlling weeds,nematodes and fungi

Soil flame disinfestation(SFD) is a form of physical disinfestation that can be used both in greenhouses and on field crops. Its use for soil disinfestation in different crop growing conditions makes it increasingly attractive for controlling soilborne pathogens and weeds. But little is known about the effect on weeds and soilbrone diseases. This study reports on greenhouses and field crops in China that determined the efficacy of SFD to control weeds, nematodes and fungi. It also determined the impact of SFD on the soil physical and chemical properties(water content, bulk density, NO3^–-N content, NH4^+-N content, conductivity and organic matter) in three field trials. A second generation SFD machine was used in these trials. SFD treatment significantly reduced weeds(>87.8%) and root-knot nematodes(Meloidogyne incognita)(>98.1%). Plant height and crop yield was significantly increased with SFD treatment. NO3^–-N and NH4^+-N increased after the SFD treatment, and there was also an increase in soil conductivity. Water content, bulk density and organic matter decreased significantly in the soil after the SFD treatment compared to the control. Soil flame disinfestation is a potential technique for controlling weeds and diseases in greenhouses or in fields. SFD is a non-chemical, safe, environmentally-friendly soil disinfection method.

Pre-stack elastic reverse time migration in tunnels based on cylindrical coordinates

Seismic forward-prospecting in tunnels is an important step to ensure excavation safety. Nowadays, most advanced imaging techniques in seismic exploration involve calculating the solution of elastic wave equation in a certain coordinate system. However, considering the cylindrical geometry of common tunnel body, Cartesian coordinate system seemingly has limited applicability in tunnel seismic forwardprospecting. To accurately simulate the seismic signal received in tunnels, previous imaging method using decoupled non-conversion elastic wave equation is extended from Cartesian coordinates to cylindrical coordinates. The proposed method preserves the general finite-difference time-domain(FDTD)scheme in Cartesian coordinates, except for a novel wavefield calculation strategy addressing the singularity issue inherited at the cylindrical axis. Moreover, the procedure of cylindrical elastic reverse time migration(CERTM) in tunnels is introduced based on the decoupled non-conversion elastic wavefield. Its imaging effect is further validated via numerical experiments on typical tunnel models. As indicated in the synthetic examples, both the PP-and SS-images could clearly show the geological structure in front of the tunnel face without obvious crosstalk artifacts. Migration imaging using PP-waves can present satisfactory results with higher resolution information supplemented by the SS-images. The potential of applying the proposed method in real-world cases is demonstrated in a water diversion tunnel. In the end, we share our insights regarding the singularity treatment and further improvement of the proposed method.