This paper investigates the temperature field distribution and thermal focal length within a laser diode array （LDA） end-pumped YVO4/Nd：YVO4 rectangular composite crystal. A general expression of the temperature fi...This paper investigates the temperature field distribution and thermal focal length within a laser diode array （LDA） end-pumped YVO4/Nd：YVO4 rectangular composite crystal. A general expression of the temperature field distribution within the Nd：YVO4 rectangular crystal was obtained by analysing the characteristics of the Nd：YVO4 crystal and solving the Poisson equation with boundary conditions. The temperature field distributions in the Nd：YVO4 rectangular crystal for the YVO4/Nd：YVO4 composite crystal and the Nd：YVO4 single crystal are researched respectively. Calculating the thermal focal length within the Nd：YVO4 rectangular crystal was done by an analysis of the additional optical path differences （OPD） caused by heat, which was very identical with experimental results in this paper. Research results show that the maximum relative temperature on the rear face of the Nd：YVO4 crystal in the composite crystal is 150 K and the thermal focal length is 35.7mm when the output power of the LDA is 22 W. In the same circumstances, the experimental value of the thermal focal length is 37.4 mm. So the relative error between the theoretical analysis and the experimental result is only 4.5%. With the same conditions, the thermal focal length of the Nd：YVO4 single crystal is 18.5 mm. So the relative rate of the thermal focal length between the YVO4/Nd：YVO4 crystal and the Nd：YVO4 crystal is 93%. So, the thermal stability of the output power and the beam quality of the YVO4/Nd：YVO4 laser is more advantageous than the laser with Nd：YVO4 single crystal.展开更多
A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave...A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave lens form a coaxial compound lens system. The plane-concave lens equipped with driving coils is installed directly above the PDMS lens surrounded by the annular magnet. When different currents are applied, the annular magnet moves up and down, driving the PDMS film to undergo elastic deformation, and then resulting in longitudinal movement of the PDMS lens. The position change of the PDMS lens changes the focal length of the compound lens system. To verify the feasibility and practicability of this design, a prototype of our compound lens system is fabricated in experiment. Our proposed compound lens shows that its zoom ability reaches 9.28 mm when the current ranges from -0.20 A to 0.21 A.展开更多
A rapid and cost-effective method for fabricating mini lens arrays is proposed. The lenses are made of silicone oil droplets and filled inside a polydimethylsiloxane(PDMS) elastomer. The lens arrays of different initi...A rapid and cost-effective method for fabricating mini lens arrays is proposed. The lenses are made of silicone oil droplets and filled inside a polydimethylsiloxane(PDMS) elastomer. The lens arrays of different initial focal lengths and apertures can be fabricated by using the droplets of different volumes. Due to good elastic behavior of PDMS, the droplet lenses can be flexibly deformed, and the focal length and numerical aperture can be tuned by applying an external force on the PDMS elastomer. Furthermore, an apparatus for focal length tuning is designed and employed in the imaging system.展开更多
文摘This paper investigates the temperature field distribution and thermal focal length within a laser diode array （LDA） end-pumped YVO4/Nd：YVO4 rectangular composite crystal. A general expression of the temperature field distribution within the Nd：YVO4 rectangular crystal was obtained by analysing the characteristics of the Nd：YVO4 crystal and solving the Poisson equation with boundary conditions. The temperature field distributions in the Nd：YVO4 rectangular crystal for the YVO4/Nd：YVO4 composite crystal and the Nd：YVO4 single crystal are researched respectively. Calculating the thermal focal length within the Nd：YVO4 rectangular crystal was done by an analysis of the additional optical path differences （OPD） caused by heat, which was very identical with experimental results in this paper. Research results show that the maximum relative temperature on the rear face of the Nd：YVO4 crystal in the composite crystal is 150 K and the thermal focal length is 35.7mm when the output power of the LDA is 22 W. In the same circumstances, the experimental value of the thermal focal length is 37.4 mm. So the relative error between the theoretical analysis and the experimental result is only 4.5%. With the same conditions, the thermal focal length of the Nd：YVO4 single crystal is 18.5 mm. So the relative rate of the thermal focal length between the YVO4/Nd：YVO4 crystal and the Nd：YVO4 crystal is 93%. So, the thermal stability of the output power and the beam quality of the YVO4/Nd：YVO4 laser is more advantageous than the laser with Nd：YVO4 single crystal.
文摘A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave lens form a coaxial compound lens system. The plane-concave lens equipped with driving coils is installed directly above the PDMS lens surrounded by the annular magnet. When different currents are applied, the annular magnet moves up and down, driving the PDMS film to undergo elastic deformation, and then resulting in longitudinal movement of the PDMS lens. The position change of the PDMS lens changes the focal length of the compound lens system. To verify the feasibility and practicability of this design, a prototype of our compound lens system is fabricated in experiment. Our proposed compound lens shows that its zoom ability reaches 9.28 mm when the current ranges from -0.20 A to 0.21 A.
基金supported by the National Key Research and Development Program of China(No.2016YFD0500603)the National Natural Science Foundation of China(Nos.61601292 and 61775140)the Shanghai Science and Technology Commission(Nos.17060502500 and 17JC1400601)
文摘A rapid and cost-effective method for fabricating mini lens arrays is proposed. The lenses are made of silicone oil droplets and filled inside a polydimethylsiloxane(PDMS) elastomer. The lens arrays of different initial focal lengths and apertures can be fabricated by using the droplets of different volumes. Due to good elastic behavior of PDMS, the droplet lenses can be flexibly deformed, and the focal length and numerical aperture can be tuned by applying an external force on the PDMS elastomer. Furthermore, an apparatus for focal length tuning is designed and employed in the imaging system.
