Frequency effect on p-nitrophenol degradation under conditions of strict acoustic and electric control

The process of decomposing p-nitrophenol （PNP） with power ultrasound requires strict control of acoustic and electric conditions. In this study, the conditions, including acoustic power and acoustic intensity, but not ultrasonic frequency, were controlled strictly at constant levels. The absorbency and the COD concentrations of the samples were measured in order to show the variation of the sample concentration. The results show significant differences in the trend of the solution degradation rate as acoustic power increases after the PNP solution （with a concentration of ll4 mg/L and a pH value of 5.4） is irradiated for 60 min with ultrasonic frequencies of 530.8 kHz, 610.6 kHz, 855.0 kHz, and 1130.0 kHz. The degradation rate of the solution increases with time and acoustic power （acoustic intensity）. On the other hand, the degradation rate of the solution is distinctly dependent on frequency when the acoustic power and intensity are strictly controlled and maintained at constant levels, The degradation rate of the PNP solution declines with ultrasonic frequencies of 530.8 kHz, 610.6 kHz, 855.0 kHz, and 1 130.0 kHz; the COD concentration, on the contrary, increase.

Effects of Collocational Congruency,Frequency and L2 Proficiency on the Processing of English Adjective-Noun Collocations

The present study investigates the effects of congruency and frequency on adjective-noun collocational processing for Chinese learners of English at two proficiency levels based on the data obtained in an online acceptability judgment task.The subject pool of this research included 60 English majors studying at a university in China;30 were selected as a higher-proficiency group and 30 as a lower-proficiency group according to their Vocabulary Levels Test(Schmitt et al.,2001)scores and their self-reported proficiency in English.The experimental materials were programmed to E-prime 2.0 and included six types of collocations:(1)15 high-frequency congruent collocations,(2)15 low-frequency congruent collocations,(3)15 high-frequency incongruent collocations,(4)15 low-frequency incongruent collocations,(5)15 Chinese-only items,and(6)75 unrelated items for baseline data.The collected response times(RTs)and accuracy rates data were statistically analyzed by the use of an ANOVA test and pairwise comparisons through SPSS 16.0 software.The results revealed that:(1)the adjective-noun collocational processing of Chinese English learners is influenced by collocational frequency,congruency and L2 proficiency;(2)the processing time is affected by the interaction of congruency and frequency;and(3)the interactive effect of L2 proficiency in conjunction with congruency and frequency also influences the processing quality.

Effect of Cyclic Loading Frequency on Undrained Behaviors of Undisturbed Marine Clay

Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for both the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are both the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.

Effects of Reduced Frequency on Network Configuration and Synchronization Transition

Synchronization of networked phase oscillators depends essentially on the correlation between the topological structure of the graph and the dynamical property of the elements. We propose the concept of ＇reduced frequency＇, a measure which can quantify natural frequencies of each pair of oscillators. Then we introduce an evolving network whose linking rules are controlled by its own dynamical property. The simulation results indicate that when the linking probability positively correlates with the reduced frequency, the network undergoes a first-order phase transition. Meanwhile, we discuss the circumstance under which an explosive synchronization can be ignited. The numerical results show that the peculiar butterfly shape correlation between frequencies and degrees of the nodes contributes to an explosive synchronization transition.

Influence of Velocity Overshoot Effect on High Frequency Perform- ance of AlGaAs / GaAs HBT's

The semiclassical transport equations are used to study the high frequency performance of AlGaAs / GaAs HBTs. Electron velocity overshoot effect and its influence on the cut off frequency characteristics of AlGaAs / GaAs HBTs with different collector design parameters are analyzed and discussed.

Dick Effect in a Microwave Frequency Standard Based on Laser-Cooled 113Cd+ Ions

The Dick effect is one of the main limits to the frequency stability of a passive frequency standard, especially for the fountain clock and ion dock operated in pulsed mode which require unavoidable dead time during interrogation. Here we measure the phase noise of the interrogation oscillator applied in the microwave frequency standard based on laser-cooled 113^Cd＋ ions, and analyze the Allan deviation limited by the Dick effect. The results indicate that the Dick effect is one of the key issues for the cadmium ion dock to reach expected frequency stability. This problem can be resolved by interrogating the local oscillator continuously with two ion traps.

Delay Effect on Coherent Transfer of Optical Frequency Based on a Triple-Pass Scheme

We demonstrate a triple-pass scheme for coherent transfer of optical frequency and the delay effect on the fiber phase noise compensation. It is theoretically proved that the delay effect consists of both fiber delay and servo delay. The delay effect confines the servo bandwidth within 1/8 and induces a residual fiber phase noise after noise compensation. For a 25-km-long fiber, the servo bandwidth is found to be around 1 k Hz, and the fiber phase noise is suppressed approaching to the theoretical limitation. The triple-pass scheme enables the simultaneous transfer of optical frequency to multiple remote users. The performance of noise compensator in the triple-pass scheme can achieve a similar level result compared with that in the double-pass scheme.

Effect of desiccation on regeneration frequency of green plantlets and some biochemical properties of calli of wild rice

Wild rice is an important resource of usefulgenes to rice breeders. However, low regener-ation frequency is an obstacle to use the valu-able genes. We used desiccation to improve theregeneration frequency and studied the bio-chemical changes of calli of wild rice after des-iccation.Materials used in this experiment werewild species O. rufipogon, O. meyeriana, O.alta, and O. brachyantha. Young panicles(0.1-0. 5 cm in length of the inflorescence)

Periodical streaming potential and electro-viscous effects in microchannel flow

This paper presents an analytical solution to periodical streaming potential, flow-induced electric field and velocity of periodical pressure-driven flows in twodimensional uniform microchannel based on the Poisson-Boltzmann equations for electric double layer and Navier-Stokes equation for liquid flow. Dimensional analysis indicates that electric-viscous force depends on three factors： （1） Electric-viscous number representing a ratio between maximum of electric-viscous force and pressure gradient in a steady state, （2） profile function describing the distribution profile of electro-viscous force in channel section, and （3） coupling coefficient reflecting behavior of arnplitude damping and phase offset of electro-viscous force. Analytical results indicate that flow-induced electric field and flow velocity depend on frequency Reynolds number （Re = wh^2/v）. Flow-induced electric field varies very slowly with Re when Re 〈 1, and rapidly decreases when Re 〉 1. Electro-viscous effect on flow-induced electric field and flow velocity are very significant when the rate of the channel width to the thickness of electric double layer is small.

Double coherence resonance of the FitzHugh Nagumo neuron driven by harmonic velocity noise

The effect of noise frequency on the FitzHugh-Nagumo neuron is investigated by the use of the harmonic velocity noise, which has a direct frequency parameter and no zero frequency part of the power spectrum. It is shown that the neuron has the resonance characteristic strongly responding to the noise with a certain frequency at fixed power, and there is double coherence resonance related to the frequency and the intensity. If the harmonic velocity noise lacks low frequency ingredients, there is no synchronization between the frequency of the neuron and that of the noise. Thus the low frequency part of the noise plays an important role in creating the synchronization.

Step-by-Step Building of a Four Dimensional Fatigue Compatible Regression Model including Frequencies

The purpose of this research is to develop a model, with emphasis on compatibility conditions and model building, valid for high cycle fatigue design components such as wind turbines, automobiles, high speed railways and aeronautical material. In this work, we have added the frequency as one more variable to an existing fatigue model that already includes maximum stress, stress ratio and lifetime. As a result, a model and estimation method has been proposed and a random variable V has been identified, which, allows the accumulated damage and the probability of failure to be assessed for any load history in terms of stress levels, stress ranges and frequencies. Finally, the model is validated using a large set of real experimental data.

Study of magnetic and magneto-optical properties of heavily doped bismuth substitute yttrium iron garnet (Bi∶YIG) film

The magnetic and magneto-optical properties of heavily doped Bi∶YIG film were studied. The film was deposited by radio frequency magnetron sputtering method and crystallized by rapid recurrent thermal annealing (RRTA). The results show that the RRTA treated film has good properties both in microwave and optical wave band. The saturation magnetization of the film on different substrates varies from 135.7 to 138.6 kA·m-1. The coercive field of the film on GGG substrate is about 0.32 kA·m-1, while about 0.8-1.43 kA·m-1 on YAG substrate and 1.75 kA·m-1 on Al2O3 substrate. The Faraday angle is about 3-5 (°)·μm-1 when optical wavelength ranges at 450-600 nm. The transmission spectra of the Bi∶YIG films on three substrates has similar change as annealing temperature below 800 ℃. Specially, when annealing temperature is above 800 ℃ a step is observed between 550 and 650 nm wavelength for the film deposited on Al2O3 substrate.Three results are very useful in magneto-optical recording application and integrated microwave devices.

Dispersion Properties in Total Internal Reflective Photonic Crystal Fiber

The dispersion properties in the short wavelength region of total internal reflective photonic crystal fiber have been studied by using the models of the equivalent twin waveguide soliton coupling,effective refractive index,effective normalized frequency and dispersion management solitons.It is shown that the dispersion in the cladding waveguide of the total internal reflective photonic crystal fiber is a positive dispersion,and the dispersion of its core waveguide is a negative dispersion.The method of the compensated probing laser diffraction by the phase hole induced by the stationary pumping laser in the cladding waveguide enables the average dispersion value of the total internal reflective photonic crystal fiber to be close to zero and the zero dispersion point to shift to the short wavelength region.

Effects of sediment parameters on the low frequency acoustic wave propagation in shallow water

The integral expression for acoustic field due to a point source in shallow waterwhile sediment is either a liquid or a solid is derived. The synthetic full waveforms are simulatedusing real axis integration and FFF method. The effects of the seabed sediment parametersand center frequency of the source on the low frequency acoustic wave propagation in shallowwater are investigated. The conclusion is that the wave groups received in far field are thoseof the mode waves of the source center frequency. The possibility for inversely deducing thecompressional and shear sound speeds of sediment using the least square optimum through themeasured group velocities of a selected mode at different frequencies is discussed.

Ordering effects of cholesterol on sphingomyelin monolayers investigated by high-resolution broadband sum-frequency generation vibrational spectroscopy

This report investigated the ordering of the alky chain of sphingomyelin （SMs） monolayers induced by cholesterol at the air/water interface using high-resolution broadband sum frequency generation vibrational spectroscopy （HR-BB-SFG-VS）. The SFG spectra of the three nature sphingomyelin/cholesterol mixture monolayers with two concentrations of the cholesterol at the air/water interface are performed under different polarization combination. A new resolved CH2 symmetric stretching （d＋, ~2834 cm-1） and the CH3 symmetric stretching （r＋, ~2874 cm-1） mode are applied to characterize the conformational order in the sphingomyelin/cholesterol mixture monolayers. It was found that the cholesterol make the sphingosine backbones more conformational order. During this process, the conformational order of the N-linked acyl chain remains unaltered. Moreover, the sphingosine backbones of SMs have much larger contributions to gauche defects of SMs than one in the N-linked acyl chain. These results presented here not only shed lights on understanding of the interactions of sphingomyelin molecules with cholesterol molecules at interface but also demonstrates the ability of HR-BB-SFG to probe such complicated molecular systems.

Effect of gate engineering in submicron GaAs MESFET for microwave frequency applications

We present an approach of GaAs MESFET incorporating the gate engineering effect to improve immunity against the short channel effects in order to enhance the scaling capability and the device performance for microwave frequency applications. In this context, a physics-based model for I–V characteristics and various microwave characteristics such as transconductance, cut-off frequency and maximum frequency of oscillation of submicron triple material gate（TM） GaAs MESFET are developed. The reduced short channel effects have also been discussed in combined designs i.e. TM, DM and SM in order to show the impact of our approach on the GaAs MESFETs-based device design. The proposed analytical models have been verified by their good agreement with 2D numerical simulations. The models developed in this paper will be useful for submicron and microwave analysis for circuit design.

The Instability of Terahertz Plasma Waves in Two Dimensional Gated and Ungated Quantum Electron Gas

The instability of terahertz（THz）plasma waves in two-dimensional（2D）quantum electron gas in a nanometer field effect transistor（FET）with asymmetrical boundary conditions has been investigated.We analyze THz plasma waves of two parts of the 2D quantum electron gas：gated and ungated regions.The results show that the radiation frequency and the increment（radiation power）in 2D ungated quantum electron gas are much higher than that in 2D gated quantum electron gas.The quantum effects always enhance the radiation power and enlarge the region of instability in both cases.This allows us to conclude that 2D quantum electron gas in the transistor channel is important for the emission and detection process and both gated and ungated parts take part in that process.

Effective generation of optical quadruple frequency millimeter-wave based on fiber laser using injection rational harmonic mode-locked technique

A method to generate the optical quadruple frequency millimeter-wave with high power efficiency is pro- posed and demonstrated based on the combination of the injection 2nd-order rational harmonic mode- locked fiber ring laser technique and the fiber grating notch filter. In this approach, the fiber Bragg grating notch filter is inserted into the laser cavity to prevent the undesired optical carrier, so that the pump power can be converted to 2nd-order harmonic wave more efficiently. In our experiment, the power efficiency of optical quadruple frequency millimeter-wave （40 GHz） generation is ten folds of that of our previous method based only on the rational harmonic mode-locked technique.

Effects of installations on the low frequency vibration response of specimens in acoustic fatigue tests

The low frequency vibration response of a specimen in acoustic fatigue tests depends not only on the dynamic characteristics and the boundary conditions of the specimen itself, but also on the test unit which couples the specimen to a given sound field. Further, the latter can even be dominant instead the former in some circumstances. This fact is shown in the paper by using the experimental results and the theoretical analysis of the acoustic-induced vibration of a boundary clamped rectangular thin plate. In analysing the systems of acoustic fatigue test, an approach of electro-mechano-acoustical analogous circuit is used. The application of the approach can give an estimation of the effects on the low frequency vibration modes of various parameters in a system quantitatively. This supplies a theoretical basis and a means for the rational layout of acoustic fatigue tests.

Frequency-dependent random fatigue of panel-type structures made of ceramic matrix composites

The panel-type structures used in aerospace engineering can be subjected to severe highfrequency acoustic loadings in service. This paper evaluates the frequency-dependent random fatigue of panel-type structures made of ceramic matrix composites（CMCs） under acoustic loadings. Firstly, the high-frequency random responses from the broadband random excitation will result in more stress cycles in a deinite period of time. The probability density distributions of stress amplitudes will be different in different frequency bandwidths, though the peak stress estimations are identical. Secondly, the fatigue properties of CMCs can be highly frequency-dependent. The fatigue evaluation method for the random vibration case is adopted to evaluate the fatigue damage of a representative stiffened panel structure. The frequency effect through S-N curves on random fatigue damage is numerically veriied. Finally, a parameter is demonstrated to characterize the mean vibration frequency of a random process, and hence this parameter can further be considered as a reasonable loading frequency in the fatigue tests of CMCs to obtain more reliable S-N curves.Therefore, the inluence of vibration frequency can be incorporated in the random fatigue model from the two perspectives.