It is showed in practice that the support load and its fluctuation is large, the periodic weighting is obvious and can be divided into two kinds, the large and small pressure, sometimes the behavior of the large press...It is showed in practice that the support load and its fluctuation is large, the periodic weighting is obvious and can be divided into two kinds, the large and small pressure, sometimes the behavior of the large pressure is very violent in hard thick seam caving faces. These are obviously different from those of the generally soft or medium hard seam caving feces. All above these are summarized, and the causes aroused these are researched. Finally the powered support selection of hard thick seam caving faces is discussed.展开更多
This study proposes a novel approach to study stress field distribution and overlying ground pressure behavior in shallow seam mining in gully terrain.This approach combines numerical simulations and field tests based...This study proposes a novel approach to study stress field distribution and overlying ground pressure behavior in shallow seam mining in gully terrain.This approach combines numerical simulations and field tests based on the conditions of gully terrain in the Chuancao Gedan Mine.The effects of gully terrain on the in situ stress field of coal beds can be identified by the ratio of self-weight stress to vertical stress(η) at the location corresponding to the maximum vertical stress.Based on the function η =j(h),the effect of gully terrain on the stress field of overlying strata of the entire field can be characterized as a significantly affected area,moderately affected area,or non-affected area.Working face 6106 in the Chuancao Gedan Mine had a coal bed Jepth <80 m and was located in what was identified as a significantly affected area.Hence,mining may cause sliding of the gully slope and increased loading(including significant dynamic loading) on the roof strata.Field tests suggest that significant dynamic pressures were observed at the body and foot of the gully slope,and that dynamic loadings were observed upslope of the working face expansion,provided that the expanding direction of the working face is parallel to the gully.展开更多
文摘It is showed in practice that the support load and its fluctuation is large, the periodic weighting is obvious and can be divided into two kinds, the large and small pressure, sometimes the behavior of the large pressure is very violent in hard thick seam caving faces. These are obviously different from those of the generally soft or medium hard seam caving feces. All above these are summarized, and the causes aroused these are researched. Finally the powered support selection of hard thick seam caving faces is discussed.
基金supported by the Fundamental Research Funds for the Central Universities of China University of Mining and Technology(No.2014ZDPY21)
文摘This study proposes a novel approach to study stress field distribution and overlying ground pressure behavior in shallow seam mining in gully terrain.This approach combines numerical simulations and field tests based on the conditions of gully terrain in the Chuancao Gedan Mine.The effects of gully terrain on the in situ stress field of coal beds can be identified by the ratio of self-weight stress to vertical stress(η) at the location corresponding to the maximum vertical stress.Based on the function η =j(h),the effect of gully terrain on the stress field of overlying strata of the entire field can be characterized as a significantly affected area,moderately affected area,or non-affected area.Working face 6106 in the Chuancao Gedan Mine had a coal bed Jepth <80 m and was located in what was identified as a significantly affected area.Hence,mining may cause sliding of the gully slope and increased loading(including significant dynamic loading) on the roof strata.Field tests suggest that significant dynamic pressures were observed at the body and foot of the gully slope,and that dynamic loadings were observed upslope of the working face expansion,provided that the expanding direction of the working face is parallel to the gully.
