Oxidation behavior of ferrovanadium spinel particles in air:Isothermal kinetic and reaction mechanism

The oxidation behavior of ferrovanadium spinel(FeV_(2)O_(4)),synthesized via high-temperature solid-state reaction,was investigated using thermogravimetry,X-ray diffractometry,and X-ray photoelectron spectroscopy over the temperature range of 450–700℃.The results revealed that the oxidation process of FeV_(2)O_(4)can be divided into three stages with the second stage being responsible for maximum weight gain due to oxidation.Three classical methods were employed to analyze the reaction mechanisms and model functions for distinct oxidation stages.The random nucleation and subsequent growth(A_(3))kinetic model was found to be applicable to both initial and secondary stage.The third stage of oxidation was consistent with the three-dimensional diffusion,spherical symmetry(D_(3))kinetic mode.Both the model-function method and the model-free method were utilized to investigate the apparent activation energy of the oxidation reaction at each stage.It was found that the intermediates including Fe_(3)O_(4),VO_(2),V_(2)O_(3),and Fe_(2.5)V_(7.11)O_(16),played significant roles in the oxidation process prior to the final formation of FeVO_(4)and V_(2)O_(5)through oxidation of FeV_(2)O_(4).

Optimization of Methylene Blue Dye Adsorption onto Coconut Husk Cellulose Using Response Surface Methodology: Adsorption Kinetics, Isotherms and Reusability Studies

In this study, coconut husk cellulose was employed as a cost-effective and environmentally friendly adsorbent to eliminate methylene blue (MB) dye from aqueous solutions. The successful development of response surface methodology paired with a central composite design (RSM-CCD) enabled the optimization and modelling of the adsorption process. The study investigated the individual and combined effects of three variables (pH, contact time, and initial MB dye concentration) on the adsorption of MB dye onto coconut husk cellulose. The developed RSM-CCD model exhibited a remarkable degree of precision in predicting the removal efficiency of MB dye within the specified experimental parameters. This was demonstrated by the strong regression parameters, with an R2 value of 99.79% and an adjusted R2 value of 99.6%. The study depicted that the optimal parameters for attaining a 98.8827% removal of MB dye using coconut husk cellulose were as follows: an initial MB dye concentration of 30 mg∙L−1, contact time of 120 minutes, and pH 7 at a fixed adsorbent dose of 0.5 g. The Freundlich isotherm model provided the most satisfactory description of the equilibrium adsorption isotherms, suggesting that MB dye adsorption onto coconut husk cellulose occurs on a heterogeneous surface. The experimental results demonstrated a strong agreement with the pseudo-second-order kinetics model, indicating that the number of active sites present on the cellulose adsorbent predominantly influences the adsorption process of MB dye. Additionally, the adsorbent made from coconut husk cellulose exhibited the potential to be reused, as it retained its efficiency for a maximum of three cycles of adsorption of MB dye. The results of this study show that coconut husk cellulose has the potential to be an effective and sustainable adsorbent for removing MB dye from aqueous solutions.

Research progress and prospects of nucleic acid isothermal amplification technology

Nucleic acid(DNA and RNA)detection and quantification methods play vital roles in molecular biology.With the development of molecular biology,isothermal amplification of DNA/RNA,as a new molecular biology technology,can be amplified under isothermal condition,it has the advantages of high sensitivity,high specificity,and high efficiency,and has been applied in various fields of biotechnology,including disease diagnosis,pathogen detection,food hygiene and safety detection and so on.This paper introduces the progress of isothermal amplification technology,including rolling circle amplification(RCA),nucleic acid sequence-dependent amplification(NASBA),strand displacement amplification(SDA),loop-mediated isothermal amplification(LAMP),helicase-dependent amplification(HDA),recombinase polymerase amplification(RPA),cross-priming amplification(CPA),and its principle,advantages and disadvantages,and application development are briefly summarized.

Measurement and prediction of isothermal vapor–liquid equilibrium of a-pinene+camphene/longifolene+abietic acid+palustric acid+neoabietic acid systems

The vapor–liquid equilibrium(VLE)data of a-pinene+camphene+[abietic acid+palustric acid+neoabietic acid]and a-pinene+longifolene+[abietic acid+palustric acid+neoabietic acid]systems at 313.15 K,333.15 K and 358.15 K were measured by headspace gas chromatography(HSGC).These data was compared with the predictions value by conductor-like screening model for realistic solvation(COSMO-RS).Moreover,the calculated data of COSMO-RS and Non-Random Two-Liquids(NRTL)models showed good agreement with the experimental data.It was found that the three resin acids inhibited the volatility of a-pinene,camphene and longifolene and resulted in the decrease of total pressure.Moreover,HE(HB)contributes the most to the excess enthalpy and the hydrogen bonding interaction is the dominant intermolecular force of a-pinene,camphene and longifolene with the three resin acids.In addition,the geometric structures optimization and binding energy were obtained by the DFT to further illustrate the hydrogen bonding interaction and the effects of the addition of the three resin acids on the isothermal VLE.

Ultrathin metal-organic framework nanosheets (Cu-TCPP)-based isothermal nucleic acid amplification for food allergen detection

The rapid and accurate detection of peanuts and soybeans allergen is important to the food safety. In this study, Cu-TCPP nanosheet, a kind of ultra-thin metal-organic framework(MOF)was synthesized and applied in loop-mediated isothermal amplification(named Cu-TCPP@LAMP), which can inhibit the non-specific amplification by absorbing and precise temperature releasing of single primer. As thus, Cu-TCPP@LAMP can achieve high sensitivity and specific amplification of the target gene. As a result, peanut and soybean allergens genes contained in food were successfully detected with a favorable detection sensitivity(5 ng/μL for peanuts and 10 ng/μL for soybeans)and reliable repeatability(The coefficient of variation was 3.38% for peanuts and 3.33% for soybeans). Moreover, the established method was utilized for detection of several commercial products, and had a high consistency with the standard method. Apart from food allergens, this novel assay can be widely used in other areas, such as pathogen detection, tumor nucleic acid detection and so on.

Establishment of a Loop-mediated Isothermal Amplification Method for Rice Bacterial Leaf Brown Spot Disease

Rice bacterial leaf brown spot disease caused by Pseudomonas syringae pv.syringae(Pss)is a major disease on rice.In recent years,Pss has emerged worldwide,seriously affecting rice production.It is very important to establish a rapid detection method of Pss for the diagnosis and prevention of this disease.In order to robust and accurately diagnose the rice bacterial leaf brown spot disease in the field and laboratory,an assay system for the Pss was developed in this study,and the specific sequence of hrcN was used as the target,based on loop-mediated isothermal amplification(LAMP).The best detection system was MgSO 48 mmol·L^(-1),Bst DNA polymerase 8 U,dNTP 1.4 mmol·L^(-1),the ratio of internal and outer primers was 2:1,the reaction temperature was 63℃,the reaction time was 45 min,and the lowest sensitivity was 104 CFU·mL^(-1).This results provided an accurate and robust method for laboratory and field diagnosis of bacterial leaf brown spot disease of rice.

Heat Characteristics and Viscous Flow in a Moving Isothermal Cylindrical Duct with Nanoparticles

Extrusion, melt spinning, glass fiber production, food processing, and mechanical molding rely on heat transmission. Isothermal techniques have been employed in highly structured equipment and living cell temperature regulators. The flow and heat properties of CuO nanofluids flowing through a moving cylindrical isothermal conduit were examined, in the presence of nanoparticles and viscous dissipation. Two-dimensional flows of an incompressible Newtonian fluid via a cylindrical conduit with uniform surface velocity and temperature were utilized. The flow’s partial differential equations were transformed to a non-dimensional form and numerically solved using a finite difference scheme built in the C++ program. The effect of nanoparticle size (0.0 to 0.6) and viscous dissipation (0, 20, 40) on heat behavior and fluid movement are examined and profiles are used to present the numerical findings. The findings revealed that decreasing the variable nanoparticle parameter increased fluid velocity, stream function, and circulation while decreasing fluid temperature. The temperature of the fluid rises in direct proportion, as the viscous dissipation factor improves. This study improves understanding of the viscous flow and heat behavior of boundary layer problems when a nanofluid is used as the heat transfer working fluid in various engineering isothermal processes such as boiling and condensation.

Comparative analysis of isothermal and non-isothermal solidification of binary alloys using phase-field model

Based on the entropy function, a two-dimensional phase field model of binary alloys was established. Meanwhile, an explicit difference method with uniform grid was adopted to solve the phase field and solute field controlled equations. And the alternating direction implicit(ADI) algorithm for solving temperature field controlled equation was also employed to avoid the restriction of time step. Some characteristics of the Ni-Cu alloy were captured in the process of non-isothermal solidification, and the comparative analysis of the isothermal and the non-isothermal solidification was investigated. The simulation results indicate that the non-isothermal model is favorable to simulate the real solidification process of binary alloys, and when the thermal diffusivity decreases, the non-isothermal phase-field model is gradually consistent with the isothermal phase-field model.

Hydrogen desorption kinetics mechanism of Mg-Ni hydride under isothermal and non-isothermal conditions

The Mg-Ni hydride was prepared by hydriding combustion synthesis under a high magnetic field. The dehydriding kinetics of the hydrides was measured under the isothermal and non-isothermal conditions. A model was applied to analyzing the kinetics behavior of Mg-Ni hydride. The calculation results show that the theoretical value and the experimental data can reach a good agreement, especially in the case of non-isothermal dehydriding. The rate-controlling step is the diffusion of hydrogen atoms in the solid solution. The sample prepared under magnetic field of 6 T under the isothermal condition can reach the best performance. The similar tendency was observed under the non-isothermal condition and the reason was discussed.

Microstructural evolution of AZ61 magnesium alloy predeformed by ECAE during semisolid isothermal treatment

The microstructural evolution of AZ61 magnesium alloy predeformed by equal channel angular extrusion（ECAE） during semisolid isothermal treatment（SSIT） was investigated by means of optical metalloscopy and image analysis equipment.The process involved application of ECAE to as-cast alloy at 310 ℃ to induce strain prior to heating in the semisolid region for different time lengths.The results show that extrusion pass,isothermal temperature and processing route have an influence on microstructural evolution of predeformed AZ61 magnesium alloy during SSIT.With the increase of extrusion pass,the solid particle size is reduced gradually.When isothermal temperature increases from 530 ℃ to 560 ℃,the average particle size increases from 22 μm to 35 μm.When isothermal temperature is 575 ℃,the average particle size decreases.The particle size of microstructure of AZ61 magnesium alloy predeformed by ECAE at BC during SSIT is the finest.

Effects of isothermal process parameters on semisolid microstructure of Mg-8%Al-1%Si alloy

A Mg-8%Al-1%Si alloy with semisolid microstructure was fabricated by isothermal heat treatment process. The effects of isothermal process parameters such as holding temperature and holding time on the microstructure of Mg-8%Al-1%Si alloy were investigated. The results show that a non-dendritic microstructure could be obtained by isothermal heat treatment. With increasing holding temperature from 560 to 575 °C or holding time from 5 to 30 min, the liquid volume fraction increases, the average size of α-Mg grains grows larger and globular tendency becomes more obvious. In addition, the Mg2Si phase transforms from Chinese script shape to granule shape. The morphology modification mechanisium of Mg2Si phase in Mg-8%Al-1%Si alloy during the semisolid isothermal heat treatment was also studied.

Formation and evolution characteristics of bcc phase during isothermal relaxation processes of supercooled liquid and amorphous metal Pb

The formation and evolution characteristics of bcc phase during the isothermal relaxation processes for supercooled-liquid and amorphous Pb were investigated by molecular dynamics simulation and cluster-type index method （CTIM）. It is found that during the relaxation process, the formation and evolution of bcc phase are closely dependent on the initial temperature and structure. During the simulation time scale, when the initial temperature is in the range of supercooled liquid region, the bcc phase can be formed and kept a long time; while it is in the range of glassy region, the bcc phase can be formed at first and then partially transformed into hcp phase; when it decreases to the lower one, the hcp and fcc phases can be directly transformed from the glassy structure without undergoing the metastable bcc phase. The Ostwald＇s ＂step rule＂ is impactful during the isothermal relaxation process of the supercooled and glassy Pb, and the metastable bcc phase plays an important role in the precursor of crystallization.

Isothermal section of Mg-rich corner in Mg-Zn-Al ternary system at 335 °C

The phase equilibria and compositions at the Mg-rich corner of the Mg?Zn?Al ternary system at 335 °C were systemically investigated through the equilibrated alloy method by using X-ray diffraction (XRD) and scanning electron microscopy (SEM) assisted with energy dispersive spectroscopy of X-ray (EDS). It is experimentally testified that theα-Mg solid solution is not in equilibrium with the Mg32(Al, Zn)49 (τ) ternary intermetallic compound orq quasicrystalline phase, but only in equilibrium with one ternary intermetallic compound Al5Mg11Zn4 (φ). The whole composition range of theφ phase was also obtained at 335 °C, i.e., 52.5%?56.4% Mg, 13.6%?24.0% Al, 19.6%?33.9% Zn (mole fraction). The solubility of Al in the MgZn phase is remarkably more than that in the Mg7Zn3 phase, and the maximum is about 8.6% Al. Aluminum and zinc are simultaneously soluble in theα-Mg solid solution.

Development of transition condition for region with variable-thickness in isothermal local loading process

Using simple unequal-thickness billet combining isothermal local loading can control the metal flow and improve the cavity fill in manufacturing process of large-scale rib-web titanium alloy component with low cost and short cycle. The beveling transition pattern is well used for variable-thickness region of billet （VTRB） due to its simple and ample range of transition condition. The transition condition development in the local loading process has a significant influence on dynamic boundary of unrestricted portion of VTRB. With the help of reasonable assumptions, a mathematical model of transition condition development was established by theoretical analysis. The predicted results for local loading process of rib-web component using the established model were compared with the numerical and experimental ones, and the results indicated that the model of transition condition development is reasonable. Using the established model could deal with the dynamic boundary of unrestricted portion of VTRB well, and the model is suitable for the analysis of metal flow and cavity fill in local loading process of multi-ribs component.

Effects of supersonic fine particles bombarding on thermal barrier coatings after isothermal oxidation

This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond coat before applying the topcoat.After isothermal oxidation at 1000 °C for different time,the surface state of the bond coat and its phase transformation were investigated using X-ray diffraction（XRD）,scanning electron microscopy（SEM） equipped with energy-dispersive X-ray spectrometry（EDS）,transmission electron microscopy（TEM） and Cr3＋ luminescence spectroscopy.The dislocation density significantly increases after SFPB process,which can generate a large number of diffusion channels in the area of the surface of the bond coat.At the initial stage of isothermal oxidation,the diffusion velocity of Al in the bond coat significantly increases,leading to the formation of a layer of stable α-Al2O3 phase.A great number of Cr3＋ positive ions can diffuse via diffusion channels during the transient state of isothermal oxidation,which can lead to the presence of（Al0.9Cr0.1）2O3 phase and accelerate the γ→θ→α phase transformation.Cr3＋ luminescence spectroscopy measurement shows that the residual stress increases at the initial stage of isothermal oxidation and then decreases.The residual stress after isothermal oxidation for 310 h reduces to 0.63 GPa compared with 0.93 GPa after isothermal oxidation for 26 h.In order to prolong the lifespan of TBCs,a layer of continuous,dense and pure α-Al2O3 with high oxidation resistance at the interface between topcoat and bond coat can be obtained due to additional SFPB process.

Calculation of Thermodynamic Parameters for Freundlichand Temkin Isotherm Models

Derivation of the Freundlich and Temkin isotherm models from the kinetic adsorption/desorpt ion equations was carried out to calculate their thermodynamic equilibrium constants. The calculation formulae ofthree thermodynamic parameters, the standard molar Gibbs free energy change, the standard molar enthalpy change and the standard molar entropy change, of isothermal adsorption processes for Freundlich andTemkin isotherm models were deduced according to the relationship between the thermodynamic equilibriumconstats and the temperature.

The kinetic of mass loss of grades A and B of melted TNT by isothermal and non-isothermal gravimetric methods

The kintic and activation energy of mass loss of two grades of melted TNT explosive, grade A and grade B, with freezing points of 80.57 and 78.15 ℃, respectively, were studied by isothermal and nonisothermal gravimetric methods. In isothermal method, the mass loss of samples in containers of glass and aluminum was followed in temperatures of 80, 90 and 100 ℃. The kinetic of the mass loss of the samples in the aluminum container was higher than the kinetic of it in the glass container that can be related to the effects of heat transfer and catalytic of aluminm metal. Also, the presence of impurities in grade B was due to increasing of kinetic of mass loss of it versus grade A. The non-isothermal curves were obtained in range of 30-330 ℃ at heating rates of 10,15 and 20 ℃·min^(-1).The TG/DTG data were used for determination of activation energy(E_a) of mass loss of TNT samples upon degradation by using Ozawa, Kissinger, Ozawa-Flynn-Wall(OFW) and Kissinger-Akahira-Sunose(KAS) methods as model free methods. The activation energies of grades of A and B of TNT was obtained 99-120 and 66-70 kJ mol^(-1)respectively. The lower values of activation energy of the degradation reaction of grade B confirm the effect of impurities in the kinetics of mass loss of this grade.

Establishment of Reverse-transcription Loopmediated Isothermal Amplification Method for Detection of Wheat Streak Mosaic Virus

A reverse-transcription loop-mediated isothermal amplification （RT-LAMP） method was established for the detection of wheat streak mosaic virus （WSMV）. Ac-cording to the conservative regions of the genes that encode the coat protein of WSMV, 2 pairs of primers were designed. Final y, the 1st pair of primers was select-ed through the specificity test. The sensitivity test showed the sensitivity of RT-LAMP method was 10 times higher than that of RT-PCR. In addition, the amplifica-tion of target gene could be judged visual y from the presence of fluorescence （cal-cein） in the final reaction system. The RT-LAMP method, established in this study, was rapid, easy, specific and sensitive. Moreover, it did not require sophisticated equip-ment. The RT-LAMP was suitable for the rapid detection of WSMV.

Kinetics of Nonisothermal and Isothermal Crystallization of Metallocene Polyethylene

The kinetics of nonisothermal and isothermal crystallization of metallocene catalyzed and conventional polyethylenes has been studied by differential scanning calorimetry. Using Avrami equation, Ozawa theory and Mo Zhishen method, the experimental data have been analyzed. It is shown that metallocene polyethylene possesses a higher rate of crystallization due to a higher stereoregularity of its molecular chains. Moreover, they have different nonisothermal crystallization mechanisms and identical isothermal crystallization mechanisms.

Isothermal section of Mg-Nd-Gd ternary system at 723 K

An isothermal section of the Mg-Nd-Gd ternary system at 723 K was established by diffusion triple technique and electron probe microanalysis （EPMA）. Mg3Gd and Mg3Nd form a continuous solid solution （Gd,Nd）3Mg, and a continuous solid solution （Gd,Nd）Mg is also formed between MgGd and MgNd. Mg7Gd, Mg5Gd, Mg2Gd, Mg41Nd5, （Gd,Nd）3Mg and （Gd,Nd）Mg are found in the ternary system. In these intermetallic phases, Mg7Gd has been reported to be a metastable phase in previous literatures. The solubilities of Mg, Gd and Nd in all the phases were detected. Furthermore, four three-phase equilibria, α（Mg）＋Mg7Gd＋Mg41Nd5, Mg7Gd＋Mg5Gd＋Mg41Nd5, Mg5Gd＋Mg41Nd5＋（Gd,Nd）3Mg and （Gd,Nd）3Mg＋（Gd,Nd）Mg＋Mg2Gd, were identified in the isothermal section.