Stability analysis of intermittently jointed rock slopes based on the stepped failure mode

In practical engineering,due to the noncontinuity characteristics of joints in rock slopes,in addition to plane failure,stepped sliding failure may occur for intermittently jointed rock slopes.Especially for intermittently bedding jointed rock slopes,the correlation and difference in strength parameters between joints and rock bridges,along with the various failure modes and intermittency of rock bridges,contribute to the complexity of stepped failure modes and the unpredictability of failure regions.Based on the upper-bound limit analysis method and multi-sliders step-path failure mode,considering the shear and tensile failure of rock bridges and the weakened relationship between the strength parameters of rock bridges and jointed surfaces,by introducing the modified M-C failure criterion and the formula for calculating the energy consumption of tensile failure of rock bridges,two failure mechanisms are constructed to obtain the safety factor(F_(s))of intermittently jointed rock slopes.The sequential quadratic programming method is used to obtain the optimal upper-bound solution for F_(s).The influence of multiple key parameters(slope height H,horizontal distance L,Slope angleβ,shear strength parameters of the rock bridgeφr and cr,Dimensionless parameter u,weakening coefficients of the internal friction angle and cohesion between the rock bridges and joint surfaces Kφand Kc)on the stability analysis of intermittently jointed rock slopes under the shear failure mode of rock bridges as well as under the tensile failure mode is also explored.The reliability of the failure mechanisms is verified by comparative analysis with theoretical results,numerical results,and landslide cases,and the variation rules of F_(s)with each key parameter are obtained.The results show that F_(s) varies linearly withφr and cr of the rock bridge and with K_(φ)and K_(c),whereas F_(s)changes nonlinearly with H and L.In particular,with the increase in Kφand Kc,Fs increases by approximately 52.78%and 171.02%on average,respectively.For rock bridge tensile failure,F_(s) shows a nonlinearly positive correlation withφr,cr,Kφand Kc.In particular,with the increase in Kφand Kc,Fs increases by approximately 13%and 61.69%on average,respectively.Fs decreases rapidly with increasing slope gradientβand decreasing dimensionless parameterμ.When Kφand Kc are both less than 1.0,the stepped sliding surface occurs more easily than the plane failure surface,especially in the case of tensile failure of the rock bridge.In addition,rock slopes with higher strength parameters,taller heights,and greater weakening coefficients are prone to rock bridge tension failure with lower Fs,and more attention should be given to the occurrence of such accidents in actual engineering.

Seismic stability of jointed rock slopes under obliquely incident earthquake waves

Seismic stability of slopes has been traditionally analyzed with vertically propagated earthquake waves.However,for rock slopes,the earthquake waves might approach the outcrop still with a evidently oblique direction.To investigate the impact of obliquely incident earthquake excitations,the input method for SV and P waves with arbitrary incident angles is conducted,respectively,by adopting the equivalent nodal force method together with a viscous-spring boundary.Then,the input method is introduced within the framework of ABAQUS software and verified by a numerical example.Both SV and P waves input are considered herein for a 2 D jointed rock slope.For the jointed rock mass,the jointed material model in ABAQUS software is employed to simulate its behavior as a continuum.Results of the study show that the earthquake incident angles have significance on the seismic stability of jointed rock slopes.The larger the incident angle,the greater the risk of slope instability.Furthermore,the stability of the jointed rock slopes also is affected by wave types of earthquakes heavily.P waves induce weaker responses and SV waves are shown to be more critical.

Distribution and mechanism of gently dipping fractures subjected to river incision: A case study from Nujiang River, China

Gently dipping fractures subjected to river incision are widely distributed on rock slopes.In this paper,a rock slope on the Nujiang River(China)is investigated to study the role of gently dipping fractures in the rock slopes evolution.Detailed field surveys indicate that gentle fractures are concentrated in four main zones.Moreover,the kinematics of the fracture system suggest that the genesis of these fractures can be synthesized into a progressive evolution model.This model indicates that the joints begin with the formation of an array of en echelon cracks that are subjected to continued crack elongation and shearing before ultimately approaching one another and interacting to form a complex joint system.Geomechanical analysis is performed to reveal the mechanisms of this genesis,and three main fracture patterns are identified based on the slope stress and are classified with respect to the slope evolution.Based on the detail field investigations and the evolutionary history of the river valley,we propose that intermittent incision by the river was the main factor contributing to the concentrated distribution of gently dipping joints.